Need Help with U330 HDMI to an HDTV with no sound.

anyone please help me with my new u330, when i connect an hdtv picture is fine but i have no sound, i did follow the manual switch to the ati chip then set hdmi as default but still have no sound.

Hi,
I had this same issue. I can't say for sure what I did to solve it, but I did eventually get the sound working. Make sure you change your sound profile to the HDMI output. I did this originally and wasn't able to get sound out of my TV; sound still came out the onboard speakers. After several tries and some fiddling it all the sudden started coming out of the TV speakers.
Click on the speaker icon in the taskbar (the Vista icon not the Lenovo icon) and hit mixer. Hit the Device drop down menu and choose HDMI output (note that this option only appears when the ATI card is enabled). Also in the sounds menu under Control Panel you can adjust the levels and test the output. When I first tried this hitting "Test" would make the test sound come out of the TV speakers, but playing a video the sound still came out the PC speakers. Then suddenly it magically started working. Perhaps it just needs a bit of time to switch the output device similar to the wait for the graphics to switch between integrated and discreet. Hope this helps you out.

Similar Messages

Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?

Hi,
I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
Integration Gateway: General Connection Failed (158,10836)
This error is thrown when there is no valid response.
Possible errors include:
Bad gateway URL
Sync Service Timeout set and Service actually timed out.
Java exception thrown - Check Application Server for possible Java exception

Do you have integration configured between the two systems? It sounds like you don't from the error. Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working. If you haven't done that, it's documented a hundred different places.
http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/

Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. Any ideas?

Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. The program installed ok and the S/N took.
The program does record video and audio HDV M2T.
The problem is video doesn't display or play back on the monitor component @ 16:9 or 720 p. 4:3....
The scopes respond as do the audio components when recording. (with a blank monitor component).
The video does play back on my system no problem.
Any ideas?
Dan

Moving the discussion to OnLocation
Thanks,
Atul Saini

Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx

Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!

If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434

Need help to log off iTunes - the tab with the current Apple-iD is "greyed" out.

Need help to log off iTunes -> the tab with the current Apple-iD is "greyed" out. Can anyone help me?

Do you have Restrictions turned on?

I need help activating my iphone 4 cdma phone with straight talk please

i need help activating my iphone 4 cdma phone with straight talk please .. i have the starter kit just need help activating it please

Settings > General > About.
-> iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible

Ok guys I am new to the iphone 4s. I just dumped my Blackberry after 10 years. I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible? Also I need it to automatically push email and appointments to my phone? I will buy any app just need to know which is best for work environment. Here is what I am thinking about doing. http://www.groovypost.com/howto/apple/sync-iphone-or-ipod-touch-calendar-and-con tacts-with-google/ Is this the best way? For personal use I am using paid G whiz app

I use Google Calendar Sync to sync my work Outlook calendar to a gmail account, then sync that to my iPhone. It works well for me for the past couple of years.
As far as mail itself, just ask your it folks for settings for remote access to your exchange account, and then set it up on the phone.
As far as working with Office docs, to be able to actually edit them and such, look in the app store for DocsToGo or QuickOffice - they both are good but each has it's pros and cons, so on balance it's down to mere preference i think.

Need help.Bought an HDMI-miniVideo Ad/20ftHDMItoHDMI for tv

How do I view my internet on my MacBookPro on my large screen Panasonic TV. I have done it with Cox in San Diego but have relocated to Iowa and have a non internet TV. I connected my laptop to Direct TV (using a wify tower and cable 100 foot in electrical PVC to Direct TV Box. In SanDiego I just connect HDMI to my Sony Bravia and have both internet and ability to set up Netflix. I am trying to accomlish watch Netflix on my computer by mirroring it to Panasonic screen/ The tv has only one extra HDMI input. That is where I connected my video from my laptop with the miniAdapter. I thought I should set up mirroring like I did in the old days with my g4 laptop when I connected to TV with an s connector and 20 foot cable. This is connected but error message that Direct TV is not programmed to video 2. I guess there is no way to choose HDMI. It asks me to program a vcr, DVD, or other service like Netflix . I would appreciate any help . I have been without internet for three weeks. Uggggh. So now am trying to set up computer with two screens. the second being my big screen tv. Would like to share emails, photos etc with 90 year old mother who could see print enlarged on bigger screen.

First of all you have to connect both devices (notebook and TV) with an HDMI cable.
Then power on the TV and the notebook.
In the TV settings choose the HDMI input port where the notebook has been connected.
Now you can use the function key F4 (or Fn + F4) in order to switch to the external video output which in your case should be the TV device.

Need help!!!! GUI problems with netbeans

i have a problem with the interface i created using netbeans.
i created a JFrame, inside it a JDesktopPane, and inside that 3 JInternalFrames. the problem is in one of the JinternalFrames, i have 4 radio buttons which i forgot to add to a buttongroup and whenever i try to do that, the GUI doesn't work anymore. The bigger problem is that if i undo the changes, the thing still doesn't work and i have to copy my backup project folder over the one i work on to get an output.
i tried to edit the source code to add the 4 buttons to a button group but netbeans won't let me since i created the buttons thru it not by writing it myself
please i really need help with this and i hope its a stupid thing i'm just overlooking.
If u need the code, i will gladly post it.
thanks in advance

if you're not using a netbeans-specific layout manager, copy the working code
into notepad, make the changes, then compile and run from the command prompt.
if all works OK, dump netbeans

Urgent!! need help to bounce all the tracks individually with same length.

i have a logic project with 20 (audio/Midi) tracks
and i want to bounce all the tracks individually...
one way i find is to solo every track and bounce the master everytime...
and other way i found was something called export all audio tracks but when i try that all tracks have different length.
i want all the tracks to be of same length and same size..
can anybody help me with that asap....
thanx in advance
boommmm
null

zerodb wrote:
even i want to know how to render multiple tracks at once using the same start point for all.. please someone.. if you're acquainted with this process in logic, do Help! thanx
File>Export>Export All tracks as Audio Files
This will export all tracks from bar 1, beat 1.
I too, am curious why the OP needs his tracks to be the same length. Using the Export feature insures all tracks start from the very beginning (i.e., the same starting point), which is what you want and need when moving the tracks to another DAW.
The length of the track is of no consequence in this example. It plays through the song, until that track is over, like a guitar solo that appears in the middle of a song, but doesn't play past that point.
Unless I'm missing something?

Need help in english to use my iphone4 with orange.fr in france

I am travelling in France with my factory unlocked iphone4. England and Thailand services have been fine but Orange France is a nightmare. They say I can't get 3G on my iphone4 and there is no english speaking support to help me out. My network settings are turned off but my 20 euro credit has either dissappeared or never was there in the first place. Where can I get English support for this company?

Hello
The whole story is a little bit confusing for me. So lets see what you wrote:
>... thinking that it would fix it but it ended up erasing the whole of my computer even windows 7.
Thinking is wrong. What you need is exact info about recovery installation and this can be found in users manuals document. Recovery disc is not like Microsoft installation disc and cannot be used for repair. Recovery disc contains recovery image and can be used for clean OS installation (recovery image installation) only.
> So now I have a computer I can't use
Why you cannot use it? Recovery image installation installs OS again. Which OS is installed after running recovery image installation?
> I have also bought the product recovery disks from toshiba's backup media site
But why if you already have recovery disc that you have used at the beginning of the whole story?
What you need to do is to use this original disc for OS installation.
-start your notebook and press F12 several times to enter BOOT menu
-when the menu is shown put recovery disc into ODD
-select CD/DVD drive in the menu and press ENTER
-follow the menu on the screen
After recovery image installation you will have factory settings again and everything should be OK.
More questions?

I need help getting my Thunderbolt display to work with Windows 7 through Bootcamp.

I recently bought a thunderbolt display and it works great in my Mac environment. But I recently added Bootcamp and Windows 7 (I need since my Broker Dealer only uses Internet Explorer). Unfortunately, I can't seem to get Windows to recognize my Thunderbolt display. Today, I spent 2 hours with a very kind advisor from Apple Support but we didn't have any success.
Here's my setup:
MacBook Pro (purchased new in 2011) with i7 processor
Thunderbolt Display
Lion OS (all updates installed)
Bootcamp with Windows 7 Ultimate 64-bit (all updates installed)
With the help of Apple Support, I downloaded and reinstalled (through the repair option) all the Bootcamp drivers. I shut down my computer, plugged in the Thunderbolt display, turned it on and booted into Windows 7. When the Windows Welcome screen appears, it shows on my Thunderbolt display for about 2-3 seconds. But the thunderbolt quickly goes black. My MacBook Pro changes to a 640x480 resolution and the Thunderbolt remains blacked out--with no signs of even a single flicker. Once the computer finishes the start-up, my MacBook Pro remains in a 640x480 resolution, with no option to change the resolution (it's grayed out in Windows control panel). If I unplug the Thunderbolt cable from my MacBook pro, the high resolution of my MacBook pro snaps back to normal.
To me, this seems like some type of driver problem but I must be missing something simple because it appears that Thunderbolt works with Bootcamp and Windows 7--based on some of the readings I've found here in the Apple support community. I'm most appreciative of anyone's help here.

Moving the discussion to OnLocation
Thanks,
Atul Saini

Need Help setting up 2 wireless internet computers with 54g wireless router

I setup the 54g wireless router using the setup disk. It appears to have worked find and the first laptop has wireless internet. I am not familiar with setting up a totally wireless network so I am not sure if I did the rest right. I then setup the 54g wireless internet router on the 2nd computer. It appears to have loaded but will not connect to the internet. I looked at the linksys setup etc... for both computers and all is the same including the WPA key, IP address, and the rest. No differences noted. I have no idea why the 2nd computer does not have wireless internet access. It has wired access only. The 2nd computer shows the wireless network but won't connect to it. I click on it and hit refresh and nothing happens. I am at a loss as to what to do now.
With 2 wireless computers, must there be a main computer and a secondary computer? The 1st computer also doesn't have access to windows network setup for some reason. It tells me to go to the knowledge base at microsoft.com and look up 871122. No idea why the windows network setup is not working. It did work before I got a new cable service provider and modem. However, the windows network setup is working on the 2nd computer. Any help is appreciated.

does the 2nd computer even need the router info loaded into it like the 1st computer or should it be enough that the wireless network was created on the 1st computer? In other words, would having the router info loaded in both computers cause the 2nd one to not connect? I have spent hours on this and I am very confused now.
My router connects fine to the cable modem. the 1st computer connects fine to the router and gets the wireless internet without a problem. Again, the 2nd computer shows the network name but won't connect to it. help please!!

Need help in configuring the Oracle app server with OC DB Server

Hello people
I attempted to insta;; Oracle Clinical 4.5 and I have a problem that you mayhave resolved a long time back and I need some help. This is what I have done on the installation.
I need your help in centralizing my tnsnames.ora and sqlnet.ora files. I am an Oracle Clinical guy and not an Oracle Expert, hence the request.
Part_1
1. Installed Oracle 9i 9.2 database on Win2K server - W2kOCSVR
2. Installed Oracle Clinical 4.5 and created DB on W2KOCSVR.
3. Started up database and all is fine - tnsnames and sqlnet.ora
4. Each of these is on a separate partition including the OS.
Part-II
1. Installed Oracle Appl Server 9iAs 1.0.2.2.2a on another machine OCMIDTIER. This installed Oracle iSuites home and stuff.
2. Then I installed Oracle 9i developer suite - Oracle forms and reports.
3. Installed Jinitiator 1.1.8.24 on the middle tier machine.
4. Basically this is the middle tier that is a Webserver that will be linked to the Database Server in Part-I
and lastly, I will have web clients with Jinitiator and a web browser.
Requirement:
I need to centralize the TNSNAMES.ora file and the SQLNET.ora file on all the machines. How do I do this?.
I have the TNSNAMES.ora and the SQLNET.ora on DB server and it is working fine. However, I have noticed many tsnnames.ora files on the middle tier - OCMIDTIER. (I've left out the example files)
a) E:\ORACLE\806\net80\admin\tnsnames.ora
b) E:\ORACLE\806\net80\tnsapi\tnsnames.ora
c) E:\ORACLE\iSuites\hs\admin\tnsnames.ora
d) E:\ORACLE\iSuites\network\admin\tnsnames.ora
All I need to know is which if these files do I need to integrate with the Tnsnames.ora file on the DB server - W2kOCSVR and how do I go about doing this?.
Your help is appreciated. If I were to see a copy of your tnsnames.ora on the webserver (middle tier) and the sqlnet.ora, I will be able to get an idea of how this is done. Right now, I am using tnsnames.ora but once I learn how this ties up, I can move to names sever.
Thanks for your help.
Cecil

Hi Cecil,
I got into the same issue. I copied the content from the good tnsnames.ora to tnsnames.ora on webserver and it worked fine. I copied the details of the connect string that was working fine on dbserver. i was working on W2k server. Hope this helps
Gonnagar

Need help on Cross Forest Exchange 2007 - 2013 with Linked Mailboxes

Hey all,
So I'm in a bit of a pickle with my Exchange design and am trying to figure out if there's a way to migrate mailboxes across forests where Linked mailboxes are being used. I've done a bit of reading and have noted stuff like preparing the move request in
AD, etc. But I'm wondering if someone can break it down for me.
http://1drv.ms/1lWjLqG
The above is a OneNote diagram of how we have moved over time. Please forgive my sloppy handwriting but I hope it gets the point across. I will text it out here as well:
Original Design
The original design of the domains when I joined the company were fabrikam and contoso. Contoso is a domain that sits entirely in the "DMZ". Fabrikam was the internal AD forest where most services and users authenticated to. In Contoso, there
are 2 domain controllers, the "Front End" Exchange Server (Edge Transport), and the "Back End" server, which is CAS/Mailbox.
There is a forest trust between contoso and fabrikam where "Linked Mailboxes" are created in Contoso, and then the LinkedMasterAccount is set to Fabrikam.
Migration/Hybrid Design
Due to the fact that these two domains were configured massively inappropriately, riddled with security holes as well as strange permissions configurations, the decision was made to create a new internal AD domain. In my OneNote, I've labeled this 'specialbank.com'.
A long while ago we migrated users from Fabrikam to SpecialBank via trusts. To facilitate access to Exchange, a new trust was created between Contoso and SpecialBank to allow us to update the LinkedMasterAccount parameter to the new Specialbank domain.
We have most of our users authenticating to their mailboxes via SpecialBank, while the mailboxes still reside in Contoso.
Migration from Exchange 2007 to Exchange 2013
I am attempting to now figure out the best way to migrate the mailboxes from Contoso to a new set of Mailbox servers in SpecialBank. This will also be an upgrade from Exchange 2007 (Current) to an Exchange 2013 installation.
The latest Service Packs and CUs are installed in both.
What would be the best procedure to move these mailboxes? To my knowledge, the current best practice/recommended way is to perform a user/SID migration from Contoso to SpecialBank. But I already have accounts in
SpecialBank that users are actively using.
I'm not opposed to doing a simple PST export from Contoso to SpecialBank, but we're looking at around 120 mailboxes. So I'm trying to make my life a little easier instead of spending a weekend here.
If I try to do it in batches, I need to figure out how to handle autodiscover and CAS. Since I'm creating an entirely new Exchange environment, I'm trying to limit what I place in the existing configuration. But I'm not opposed to setting up something temporarily
if I need to in order to make the migration transparent to users.
Can anyone help?

Hi ,
From you description i came to know contoso is the resource forest and special bank is the account forest .
You just wanted to migrate the linked mailboxes from resource forest to account forest and also you would want the migrated mailboxes to get merged to the respective user accounts in the account forest to become as a normal user mailbox.Am i right ?
Please correct me if i am wrong . I have found some blogs in internet please have a look in to that especially the first one.
http://www.outlookforums.com/threads/60210-cross-forest-mailbox-move-and-linked-mailbox/
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_27974905.html
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Need Help with U330 HDMI to an HDTV with no sound.

Similar Messages

Maybe you are looking for