Need hotfix for BUG Check reboots for 2012R2

I have 5 Node cluster of 2012R2 which will go to production in next few days, but am struck with the Bug check issue, which reboots atleast 3 nodes frequently. Am aware of this bug check and know the hotfixes for 2012 and 2008. However am not able to find
the hotfix or steps to resolve this issue on 2012r2.
Need assistance to fix this problem.
Thanks in advance, below the debug report.
3: kd> !analyze -v
*                        Bugcheck Analysis
USER_MODE_HEALTH_MONITOR (9e)
One or more critical user mode components failed to satisfy a health check.
Hardware mechanisms such as watchdog timers can detect that basic kernel
services are not executing. However, resource starvation issues, including
memory leaks, lock contention, and scheduling priority misconfiguration,
may block critical user mode components without blocking DPCs or
draining the nonpaged pool.
Kernel components can extend watchdog timer functionality to user mode
by periodically monitoring critical applications. This bugcheck indicates
that a user mode health check failed in a manner such that graceful
shutdown is unlikely to succeed. It restores critical services by
rebooting and/or allowing application failover to other servers.
Arguments:
Arg1: ffffe8010a271900, Process that failed to satisfy a health check within the
configured timeout
Arg2: 00000000000004b0, Health monitoring timeout (seconds)
Arg3: 0000000000000005
Arg4: 0000000000000000
Debugging Details:
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_KPRCB
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_KPRCB
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_KPRCB
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.
MODULE_NAME: netft
FAULTING_MODULE: fffff80021089000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 5215f788
PROCESS_OBJECT: ffffe8010a271900
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x9E
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) x86fre
LAST_CONTROL_TRANSFER: from fffff800a291ac08 to fffff800211dcfa0
STACK_TEXT:
ffffd001`d60c6938 fffff800`a291ac08 : 00000000`0000009e ffffe801`0a271900 00000000`000004b0 00000000`00000005 : nt!KeBugCheckEx
ffffd001`d60c6940 fffff800`a291a892 : 00000000`00000000 00000000`00000000 ffffd001`d601c180 ffffe001`1f716ec8 : netft+0x2c08
ffffd001`d60c6980 fffff800`210e2810 : ffffd001`d60c6b00 ffffe001`1f716ec8 ffffe001`24e7d220 ffffd001`d601c180 : netft+0x2892
ffffd001`d60c69b0 fffff800`211e0aea : ffffd001`d601c180 ffffd001`d601c180 ffffd001`d6028dc0 ffffe001`24e7d080 : nt!KeRemoveQueueEx+0x3b80
ffffd001`d60c6c60 00000000`00000000 : ffffd001`d60c7000 ffffd001`d60c1000 00000000`00000000 00000000`00000000 : nt!KeSynchronizeExecution+0x2efa
STACK_COMMAND: kb
FOLLOWUP_IP:
netft+2c08
fffff800`a291ac08 cc              int     3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: netft+2c08
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: netft.sys
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:wrong_symbols
FAILURE_ID_HASH: {70b057e8-2462-896f-28e7-ac72d4d365f8}
Followup: MachineOwner
ndraj

Hi,
Try to install all recommended cluster hot-fixes to stop further BSODs. Bug check ID 0x9E is recorded for this shutdown & image name netft.sys cause of server shutdown.
As suggested in
similar kind of thread netft.sys is driver of MS Cluster Virtual Adapter. Try to to update firmware/drivers of NICs.
Here is another useful link for your reference
Regards, Ravikumar P

Similar Messages

Updated documentation for "Bug Check 0xDA: SYSTEM_PTE_MISUSE" for Windows 7?

Hi,
I upgraded my Vista x64 (Dell Optiplex 755) to Windows 7 RTM and I'm getting the above bug check. The following site nicely describes the various bug check parameters - http://msdn.microsoft.com/en-us/library/ms796150.aspx - but I don't see an entry for parameter 1 that I'm seeing (504). I assume the 504 is new for Windows 7? If anyone has updated information on this bug check, that'd be much appreciated. From windbg:
BugCheck DA, {504, fffff6fc4002a2e0, 30, 545c}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+b47b )
Thanks
Hans
HK

Hi Hans
Thanks for letting us know how you resolved the problem.
Regards,
Thank You for using Windows 7
Ronnie Vernon MVP

Please send me the exit name to add my code for AUTLF check box for VA02

Hi All,
My requirement is as follows,
1) The scope of this enhancement is required only for transaction VA02 - Change Sales Order, order-type maintained in table TVARV
2) In the program, if User tries to uncheck the checkbox Complete delivery (VBAK-AUTLF), program to check if there are subsequent deliveries for stock reservation (Delivery type ZRES) are existing or not. If the deliveries are existing, an appropriate error message should be displayed and user should be restricted from performing this activity.
So please tell me where to insert my code? according to my requirement and also please send me the user exit or function module exit
Thanx in advance,
santhosh.

USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

How to create Check table for Field Maktx

Hi Experts,
I am create one ztable with fields Mandt, Matnr, Maktx, Type1 and Type2 etc.
I need a create a check table for field MAKTX.
If i give material number the its the material description also.
Thanks in Advance,
Purnaneelu.

Hi,
Actually i am create one ZTable with fields Mandt ,matnr, maktx, type1,type2 and type3
Now i am entry the data for matnr,type1,type2 and type3 .
Now i am going to TCode SE16n material is not appears, but the requirement is shows the description also
STOP USING I AM in each and every sentence...and try to correct your english...so that people can understand your problem easily.
Hope this suggestion will help you going forward at the time of posting your question at SDN.
Wram regards,
Abhishek

Check list for Customization of FI module

SAP Guru's
Can any one guide me for Steps/check list for customisation of FI module
and how to document it.
Sandeep

Hi,
In SAP, there are quite a few configuration steps which are required in each and every FI implementation. However, it will be different in each client, depending upon several factors like Business Processes / requirements of the client / what modules are being implemented / what interfaces are to be maintained etc.
Similarly, if FI module alone is implemented it will be simple, but if FI and CO are implemented, it will be complex. Hence, I suggest first understand the requirements in a broad manner and based on that you can arrive on what configuration needs to be done.
Also note that SAP standard configuration will already exist and you can copy most of the settings to your Company Code(s).
At the high level, Organization structure has to be created based on Business requirements like Company Codes, Credit Control Area, Controlling Area, Operating Concern, Sales Organization, Division, Plant etc.
Some of the specific configuration steps in FI are creation of Chart of Accounts, Document types, Field Status variant, Account Groups for Customer / Vendors etc. This is not exhaustive and you can look at IMG to identify the different config steps required for your client.
Thanks
Murali.

Checking Rule for PO STO

Hi there,
I need to know how to setting this, PO STO can not allocated Finished Goods item, because it's already reserved by SO.
Right now, PO STO can not do this then the result is SO can not keep the item anymore.
Many Thanks'
Nardo
Edited by: Nardo9574 on Feb 26, 2011 5:02 AM

Dear Murugesan
In Material Master MRP3 view, you would be maintaining some value for "Availability Check". For this availability check, in OVZ9, the checking rule is defined.
Based on the combination of this, when you create a sale order for that material, the checking rule will be carried out.
thanks
G. Lakshmipathi

Check writer for HR PAYROLL

Can any one clarify that check writer and check writer(xml) concurrent programs that are used for payroll check printing are same? if not when should we use check writer and when should we use check writer(XML)? (why i am asking these because concurrent program short name which is the code for data definition and template are not same,but the data definition name( Check Writer XML) is same for template(Check Writer for US))
To Enable check writer(XML) i gone through some setups in oracle support should that be performed to use check writer(XML) instead of check writer? and finally to customize my check template where can i get the XML DATA ? Any replies will be appreciated thanks in advance.

There are several documents on Metalink that provide the steps necessary for using CheckWriter(XML). Basically, the CheckWriter and the CheckWriter(XML) programs are the same however the XML program runs through the Oracle provided data definitiion and xml template to produce the PDF output.
When you run the Check Writer (XML) program you will find two programs in the Concurrent Request window. The PDF output from the template will generate from the 1st program and the XML data that is used to generate is found in the 2nd program. You can copy the seeded Oracle XML check template and rework it to fit your organizations requirements.
~RL

Windows 2003 Memory Dump - Bug check Analysis attached

Hi all
I recently have had a Windows 2003 Standard with SP2 server crash with a memory dump
I have used WinDBG to read the file and output below
can anyone shed any light on the faults, or point me in the right direction?
*                        Bugcheck Analysis
KERNEL_MODE_EXCEPTION_NOT_HANDLED (8e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 8081c630, The address that the exception occurred at
Arg3: b7487c30, Trap Frame
Arg4: 00000000
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!IoGetAttachedDevice+c
8081c630 8b4810          mov     ecx,dword ptr [eax+10h]
TRAP_FRAME: b7487c30 -- (.trap 0xffffffffb7487c30)
ErrCode = 00000000
eax=000007f6 ebx=85e76068 ecx=000007f6 edx=00000000 esi=85e76068 edi=89d42020
eip=8081c630 esp=b7487ca4 ebp=b7487ca4 iopl=0         nv up ei pl nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000             efl=00010206
nt!IoGetAttachedDevice+0xc:
8081c630 8b4810          mov     ecx,dword ptr [eax+10h] ds:0023:00000806=????????
Resetting default scope
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x8E
PROCESS_NAME: DocTransport.ex
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) x86fre
LAST_CONTROL_TRANSFER: from 8082db20 to 80827f7d
STACK_TEXT:
b74877fc 8082db20 0000008e c0000005 8081c630 nt!KeBugCheckEx+0x1b
b7487bc0 8088c12a b7487bdc 00000000 b7487c30 nt!KiDispatchException+0x3a2
b7487c28 8088c0de b7487ca4 8081c630 badb0d00 nt!CommonDispatchException+0x4a
b7487ca4 8081c7e1 89d42020 b7487d64 00000000 nt!KiExceptionExit+0x186
b7487cb8 808f44c7 85e76068 b7487d64 08a9ea50 nt!IoGetRelatedDeviceObject+0x63
b7487d38 8088b658 00001e20 00000000 00000000 nt!NtReadFile+0x55
b7487d38 7c82845c 00001e20 00000000 00000000 nt!KiSystemServicePostCall
WARNING: Frame IP not in any known module. Following frames may be wrong.
08a9ea8c 00000000 00000000 00000000 00000000 0x7c82845c
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!IoGetAttachedDevice+c
8081c630 8b4810          mov     ecx,dword ptr [eax+10h]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!IoGetAttachedDevice+c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrpamp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 51d4c567
IMAGE_VERSION: 5.2.3790.5190
FAILURE_BUCKET_ID: 0x8E_nt!IoGetAttachedDevice+c
BUCKET_ID: 0x8E_nt!IoGetAttachedDevice+c
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x8e_nt!iogetattacheddevice+c
FAILURE_ID_HASH: {22c1c728-5bf3-efb9-fff4-40d5ae0d47e2}
Followup: MachineOwner

Hi,
For Bug Check 0x8E, it
indicates that a kernel-mode application generated an exception that the error handler did not catch. For more details, please refer to following article and check if can help you.
Bug Check 0x8E: KERNEL_MODE_EXCEPTION_NOT_HANDLED
Did you remember that which operation (or any change) you do before this issue occurred? Or just the server
crashed suddenly?
Please check if all necessary updates were installed and drivers were updated.
à
PROCESS_NAME:
DocTransport.exe
Did you install any third-party application on the server? Please
perform a clean boot and monitor the result.
By the way, as you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. However, it is not
effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu

CC Photoshop on mac need internet connection to check licences on some Adobe's websites ?

Hi,
i will install CC Photoshop on 3 mac where now is installed Photoshop Cs6 , these mac are in a lan where internet connection is disabled for security reason.
Do i need enable internet connection for some Adobe's websites for licence check ?

Hi Ned,
do you know which website's addresses will be contacted for the check ?
For example i guess :
- www.adobe.com/.....
- https://creative.adobe.com
Do you know other websites ?
Thanks for your help !!!!!
Cristiano

Issue with update_task API for updating Scheduled Dates for Task..

Hi All,
We have a requirement to update the project and task dates to a specified period from the current dates. I dont want to update all the tasks, and hence using the update_task API. The scheduled_finish_Date is the column from "pa_proj_elem_ver_schedule" which we want to update. As, this is the date which is shown on the Workplan tab for the tasks for (Scheduled Start and Scheduled Finish Date). I want to extend this scheduled_finish_Date to some days , say for eg. 60 days.
To achieve, that update_task api is being used and the parameter for the scheduled_date is : p_scheduled_finish_date, this is passed as call to pa_project_pub.update_task API.
We are also updating the completion data, which is happening fine and is updating the pa_tasks : completion_date column.
Problem is with scheduled date, Please let me know how to go about this issue.
Here is the sample code for calling the API :
pa_project_pub.update_task
(p_api_version_number => l_api_version_number_i,
p_commit => l_commit,
p_init_msg_list => l_init_msg_list,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => lt_return_status,
p_pm_product_code => l_pm_product_code,
--p_structure_updates_flag => g_no,
p_pm_project_reference => l_proj_reference,
p_pa_project_id => p_project_id_i,
p_pm_task_reference => p_pm_task_reference_i,
p_pa_task_id => p_task_id_i,
p_task_name => p_task_name_i,
p_task_number => p_task_number_i,
p_pa_parent_task_id => p_parent_task_id_i,
p_task_completion_date => p_tsk_actual_finish_date_i,
--Transaction Date (shown on the screen)
p_scheduled_finish_date => p_tsk_sched_end_date_i,
-- Scheduled Date (shown on the screen)
p_out_pa_task_id => l_pt_task_id,
p_out_pm_task_reference => l_pt_task_ref
I am really not sure if I am missing anything here, please suggest as to how to update the Schedule Start and Finish Dates using the API.
Waiting in anticipation!
Thank you
Anand.

Hello,
Make sure the wf is active in QA (re-activate if possible), check the transport for errors, check authorizations for WF-BATCH perhaps delete and recreate via SWU3?), refresh the buffers (SWU_OBUF).
Please let me know if any of this helps.
regards
Rick Bakker
Hanabi Technology

Open sales order value for credit check need to be changed (S066)

Hi all,
I need to change open sales order value which is already there in S066 table.
Previously we had used open order value for credit check. Open order values are already updated in the S066 table.
Now we dont want to consider open order value for credit check (which is already included in the credit exposure field in FD32).
When we create sales order system is taking old open order value for credit. Now i have changed not to update open order value for credit check. Now its not updating open order value. But my issue is how to change existing or (previous) open order value for credit?
Can i change S066 table data directly to '0'. Is it advisable to chage open order value directly from this table?
Please advise me.
Regards,
Babu
Edited by: babs on May 19, 2010 4:26 PM

Hi Babs,
If you doesn't want to reflect the open order value in the structure for this order value ,If the order is not processed kindly delete the line items and the order. Then save the document. Then try to see the structure S066.. This will be modified.
If you want to modify the value then follow the below process.
Otherwise delete the line item in the order and change the pricing date and the document date. Re enter the line item again so that it will take it up the new changes.
I hope it will help.
Regards,
SK

Help needed in UserExit QEVA0010 for UD Check

Hello All,
I need you help in UserExit QEVA0010 for UD Check. Actually i want to restrict user to enter stock posting when particular UD Code is Enter. For Exmple, If user set UD Code as 'A' (Accept) then in another tab for stock posting user can only enter stock quantity in "unrestricted" and in "Sample Qty". Is it posssible to disable all other fields except Unrestricted & Sample qty.?
With Thanks & Regards,
Mudassar Praniya.

Hi,
Please use the following:
when 'SICH'.          " On Save action
if vbak-vtweg eq 'HA'. " Check Distribution channel
flg_dh = 'X'.         " Sets if DC is 'HA'.
endif.
if flg_dh eq 'X'.
if vbap-pstyv eq 'TANN'.    " Check item category
    flg_itmc = 'X'.            " Set if item cat is 'TANN'.
else.
message 'SO could not be created Please enter brokerage material' type 'E' display like 'E'.
endif.
endif.

Need to Create a Check for Plant in WBS & Plant in Network

Dear Guru's,
While creating Project (CJ01) my users are creating in a Plant, and while creating network for the same project/WBS, they are using different Plant Code.
Since my Profit center is related to the plant in CJ01,
and because of wrong Plant in network, all my PR/ PO is going in a different Profit center, which is creating a huge problem while auditing.
I need to Create a Check for Plant in WBS & Plant in Network...!!
Kindly suggest me the ways to do it and how to do it...

Hi Deepa,
The Check you are trying to create between Plant defined at Project def and network level that should be same can be achieved through validation at the network level by using a user exit at network level.
                While creating the network you can change the plant value not equal to the value at proj def/network profile may be one of the reason is since the network type is defined for more than one plant (OPUV).
                While creating validations at network level we do not have the option of setting the prerequisite/check using WBS or Proj def fields (i.e. PROJ-, PRPS- fields)    so we need to create a user exit at the network level.
I am not sure but logically u can have a user exit for both prerequisite and check steps of the validation.
You need to create the user exit in program ZGGBR000.
Please take help from your Abaper for the same.
OPSI-Network header-Validation- Step - Prerequisite u2013 Check u2013 Message.
Prerequisite
If Proj Profile = u2018XXXu2019 and Network Profile = u2018XXu2019 (or as per your logic if need be use a exit)
CHECK.
PROJ-WERKS = CAUFVD-WERKS   (This logic needs to be defined in user exit and set the same user exit at the check.)
Once you define the user exit in ZGGBR000, it will be available in the tab u2018exitsu2019 at the Prerequisite and Check levels.
The name of the form pool (e.g., ZGGBR000) that contains your user exit must be stored in table T80D.
It is important that you make declare the code generation program for your user exit; how many and what type of parameters you are using for the user exit. You do this by entering your newly defined user exits in the form routine GET_EXIT_TITLES. Found in program ZGGBR000.
Check with your Abaper to check on all the aboveu2026
Message:
Plant at Network level should be same as at Project def level.
Hope it helps you,All the best..
Regards
Vinayak.

Do I need to do authority check for Logical Database?

Hi,
Just to check, do I need to code authority check into a Logical Database or Logical Database will do the check by itself without me coding?
This is because I have a user which does not have rights to infotypes 2000 and above and the logical database still show the user data which belongs to the infotypes 2000 and above.
If I have to code it, how do I go about to do the coding of authority check?
Thanks in advance. Will reward points for good solutions.
Lawrence

Let me give an example
Tables : pernr.
infotypes: 0000, 0001, 2001.
Get pernr.
Do you mean that the 'get pernr' command will not return any data for users who do not have authorisation for infotype 2001?

I need the check list for SOLMAN implementation

Hi gurus ,
i need the check list for solution manager implementation and what are the things to be discuss with the client , i am new to SOLMAN, i have to do this by the evening , any one can help me out
Cheers
Gopal.rao

Hi Gopal,
I am not sure if this thread of yours is in continuation of the other thread you have started which has been replied by two other Forum members.
The checklist depends upon which Scenario(s) of SolMan you are trying to implement.
- Implementation/ Upgrade of ERP systems
- Service Desk
- Change Request Monitoring
- Diagnostics
- Solution Monitoring (includes BPM/ Interface monitoring)
- Delivery of SAP Services (EWA, .....)
Unless you specify the scenario you are seeking information on, it is difficult for anyone to pose a satisfactory reply.
Best regards,
Srini

Need hotfix for BUG Check reboots for 2012R2

Similar Messages

Maybe you are looking for