Need install Instructions for installing Hyperion planning on UNIX

Hi All,
Can anybody provide install instructions, tips and tricks for installing Hyperion Planning 9.3.1 on UNIX.
Thanks in anticipation
AR

Hi,
Try the Planning installation guide for unix at http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hp_unix_install.pdf
Cheers
John

Similar Messages

  • Need Instructions for installing AE card in dual G5 tower

    I need instructions for installing a AE card in a dual 2 GHZ powermac G5. I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor. My G5 is presently connected to a netgear router and I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router. Any help would be appreciated.
    ron

    ] I need instructions for installing a AE card in a dual 2 GHZ powermac G5.
    http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
    ]I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor.
    You are going to need the t-shaped external aerial otherwise this is not going to work. Even though your PowerMac did not come with an Airport Extreme Card built in, it would have been supplied with the aerial.
    You will need to find a replacement.
    ]I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router.
    I am presuming that your Netgear is not wireless.
    Can you connect the Airport Express to the router are do you want it in a different room?
    You will be able to be connected to the router and AX at the same time, but in order to avoid internet and network issues, you should ensure that built-in-ethernet is above Airport in the network configurations.

  • I need instructions for installing blue tooth for apple iphone 4s?

    I need instructions for installing blue tooth for apple iphone 4s?

    We have Jabra bluetooth.  We got out the instructions that came with the Jabra and and followed them.  Worked like a charm.  Just remember that once the bluetooth is paired, you cannot go more than 30 feet from your phone while using it.

  • Step by Step Instructions for Installing Self Signed Certificate using Certificate Modification Tool

    I am looking for some step by step instructions for installing the self signed certificate from my Microsoft SBS 2003 server on a Treo 755p and 750p.  In particular I need some help with the form of the actual certificate and how to use the Certificate Modification tool. 
    Some questions I have are as follows:
    1. When I install the certificate on a Windows Mobile device I used an exported version of the certificate.  This export is done using the DER x.509 format.  Is that the same form I’ll need for the Palm?  Do I need some other form? Can/should I just use sbscert.cer file that is generated when SBS is configured?
    2. Does the self signed cert need to be installed on the computer being used to update the Palm or do we just need to be able to access the appropriate .CER file?
    3. There are three things included in the PalmCertificatesTool.zip file:
                                    Trusted CAs (folder)
                                    Cert2pdb.exe
                                    PalmCertificates.exe
       How do I use these tools?
    4. It looks like the PalmCertificates.exe file opens an interface that will allow me to browse to the desired .CER file.  Then I suppose I use the < Generate PDB > to create something that needs to then be uploaded to the Palm device?  Not having any real experience with a Palm device how do I upload and install this file? 
    5. Once uploaded do I do something on the device to install it?
    If there is some white paper that provides step by step instructions on doing this that would be great.
    Thanks,
    Walt Bell
    Post relates to: Treo 755p (Verizon)
    Post relates to: Treo 755p (Verizon)

    Thanks for that.
    I have one question after reading the article 43375:
    The article has you "Turn of AutoSync" and then "Reset the device".  It then indicates the device should be left idle. 
    The next step relates to running the PalmCertificates.exe, navigate to the certificate file and add it and then run the < Generate PDB > button.  Should the device be connected to the computer during this process? If so, at what point after the reset do you connect it to the computer?
    Thanks!
    Post relates to: Treo 755p (Verizon)

  • Basic instructions for installing Air?

    Hi
    I'm use Flash CS5, and want to learn Air.
    I installed Air 2.5.
    Do I need to istall the SDK?  If so, where do I put it, and how do I set it up?
    What is the difference between the runtime and sdk?
    Thanks for your help.
    Shaun

    Hi Shaun,
    Thanks for showing interest in AIR 2.5.  To start, it sounds like you've installed the AIR 2.5 runtime, which by itself will let you install and run AIR applications on your computer.  To start developing, you'll need to get the latest SDK.  You can grab a copy of this for Flash CS5 here:
    Adobe Flash Professional CS5 Extension for AIR 2.5
    There are instructions for installing at the bottom of the page, along with a link to the beta forum.  I'd also like to encourage you to check out the Adobe AIR Quick Starts for Flash Developers, the video tutorial series Designing an AIR Application, and the pdf Developing Adobe AIR 1.5 Applications With Adobe Flash CS4 Professional.  While the video series and the pdf are a bit dated, they still contain great information and you can information on the latest 2.5 API's on our Adobe AIR Developer site.
    Hope this helps,
    Chris

  • Confused about the instructions for installing MySQL on my OS X client

    I installed MySQL for OS X as recommended here:
    http://developer.apple.com/internet/opensource/osdb.html
    it looks like I managed to created a test database in the mysql directory, but now can't access it.
    Basically, I'm confused about what to do after installing the MySQL server about setting permissions, getting databases to be where I want them to be, etc.
    I tried download phpMyAdmin, since I am used to using that via cPanel on my ISP, but don't know how to use it on my Mac. Do I need to start up Apache to do that? And if I do that, won't it interfere with the mongrel server that I'm trying to use in the separate Ruby on Rails instructions?
    I guess I could probably do all my development online via my ISP, which supports Ruby on Rails and where it is easy to set up MySQL databases, but if I could just figure out how to use MySQL on my Mac it would be fun to try to do this development offline.
    Any hints?
    Thanks,
    doug

    Have you done anything past those instructions? like creating MySQL user accounts, granting permissions, etc?
    There's a whole lot more to running MySQL that just installing it (and I'm not sure why Apple suggest building from scratch when MySQL offer binary distributions which do all the hard work for you.
    Once installed you should follow the MySQL Post Install Instructions for guidance on setting up accounts and configuring MySQL.
    As for the PHPMyAdmin question, yes, you'll need Apache running. Whether that will conflict with any other web services you're running depends on how they're configured. I've never heard of mongrel to be able to advise further there.

  • Instructions for installing SAPCRYPTO library

    Where can I find the latest instructions for installing the SAPCRYPTO library?  I have a copy of "installing the sapcrypto library and starting the SAProuter" that I printed from the service marketplace in 09/2007, but cannot seem to find any updated instructions on the saprouter-sncadd site.  We are moving the saprouter service to an different server and I need to download & install the latest files.
    I did not find any pertinet OSS note either.
    Thank you,
    BV

    http://service.sap.com/saprouter-sncdoc
    good luck.
    b.rgds, Bernhard

  • Silent install instructions for Photoshop Elements 8 (AOO volume license version on Windows)

    Hello,
    Does anyone know if the silent installation of Photoshop Elements 8 works the same way the versions 6/7 work? I can't find any article in the support site that states that is does...
    Thanks in advance for answering this question.
    Joost Brenters
    Gemeente 's-Hertogenbosch
    The Netherlands

    Since in the silent install EULA is never accepted and user has not specified any country value, hence I don't believe you will be able to get away from seeing these two dialogs. For registration dialog, there is a way to suppress it during silent install.
    You can send a private message to Aanchal and hopefully, she will get back to you with more information.
    You are correct, silent install instructions for PSE 7 wont work for PSE 8.
    Regards,
    Ankush

  • I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere i

    I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere in Safari help with no success. How can I restore this plug-in, PLEASE?
    Austin Moore
    Knoxville, Tennessee

    I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere in Safari help with no success. How can I restore this plug-in, PLEASE?
    Austin Moore
    Knoxville, Tennessee

  • I need XMANAGER SOFTWARE FOR INSTALLING ORACLE IN SERVER

    I NEED XMANAGER SOFTWARE FOR INSTALLING ORACLE IN SERVER.
    UR HELP REALLY APPRICATED.

    Please get Cygwin, or (Real)VNC, or putty (all free), or eXceed (not free, but free demo),
    but do not SHOUT.
    Sybrand Bakker
    Senior Oracle DBA

  • Instructions for installing quicktime pro:

    I have Quicktime 7, and I purchased QT Pro, but the instructions for installing QT Pro aren't working on my PC. The instructions say to go to Settings in my Startup menu, but there is no Settings in my Startup menu. From there it says to find the Control Panel, then go to the Quicktime Control Panel. I do have Control Panel in the Startup menu, but it doesn't take me to Quicktime. If I open Quicktime, there's no Control Panel in there either. I'm totally at a loss! Anyone know what to do?

    Look under the Edit menu.

  • I need detailed instructions for scanning to my iMac using my hp desk jet 2540.

    I need detailed instructions for scanning to my imac, using the HP Deskjet 2540.

    Follow the instructions in this article, http://support.apple.com/kb/ht4505
    I double checked and your scanner is supported.

  • Need install instructions for weblogic on 2008 64bit

    Trying to install weblogic 10.1.3.3 on windows 2008 R2 64bit (xeon processor) using Sun JDK 64bit
    windows exe installer finished the install without issue, but then the weblogic would not start.. prompts for userID and crashes before prompting for password..
    I read somewhere that for sun jdk 64bit you should use the generic jar installer instead of the windows installer..
    so I tried it and java -jar installer.jar gives an error that it expecting the path to something
    does anyone have any working instructions for the install

    Hi,
    Try the Planning installation guide for unix at http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hp_unix_install.pdf
    Cheers
    John

  • Anyone able to give simple 'how to install' instructions for linux ?

    I have a G5 1.8 with 3GB RAM; 80/160 internal SATA drives (the 160gb hd has 2 partitions and one with nothing on it) as well as a Lacie external 320 GB firewire drive. The empty partition on the 160gb drive has been created for Linux (if it ever gets installed).
    I need to know where I can get a copy (I dont have a preference for any type yet-whatever works for a computer that is just used by me- as I just want to get started); How specifically to install it (I dont know anything about linux except I have heard about it's ease of use and how anyone can install it-except me it seems-I literally don't have a clue how to do it). Please leave out the geek speak (lol or at least just make it understandable for a someone who's pretty much a 'non-geek').
    Thanks so much everyone. This has been a 3 month long odyssey for me with everyone I do ask giving me wildly different answers. As I say I have no idea how to do this and just want to get started.
    Anyone , please ?

    Hi-
    There are a few choices for Linux, but there are some peculiarities when it comes to PPC Macs.
    I'll give you this article on Ubuntu Linux which has some general discussion.
    Anyhow, Ubuntu 6.06 (Dapper Drake) may be a good version. Check Here.
    For Ubuntu, download the software and burn to CD.
    Insert the CD into the computer, and, after opening, there should be a screen asking you whether or not you want to run the Live CD. Select Live CD. After loading, the default Ubuntu desktop will show. Once you get to the desktop,select the icon for the full installation of Ubuntu.
    Note that you need to install Ubuntu on the primary system disk.
    Might have a look at Debian. Complete instructions for installation are Here.

  • Install instructions for CS6 upgrade for WIndows missing - in what order should files be run?

    After over 14 days of dealing with the idiots at Adobe Support, opening and closing of 2 cases multiple times, promised emails not being sent (and being blamed for having my email set up to filter out Adobe emails), attempts to charge me for the already approved &quot;free&quot; upgrade, and then having an order for a physical disk version of the CS6 upgrade cancelled by some bonehead, I finally was able to download the CS6 upgrade files.  Only to discover that there are no installation instructions for Windows if you did not use the Akamai download manager (which I did not).
    There are a total of 6 files in the download directory, all downloaded from the CS6 upgrade download page. 
    - In what order should the files be run?  Just run the .exe files, or do some files need to be extracted/unzipped first?
    A second question: my CS5.5 version was never installed, and never registered. 
    - Will the CS6 upgrade accept its serial number directly, or do I have to do something else through Adobe Support?
    --  WTW

    Which files: all of them on the CS6 Production Premium upgrade download page.
    ProductionPremium_CS6_LS7.7z
    ProductionPremium_CS6_LS7.exe
    PremierePro_6_Content_LS7.7z
    PremierePro_6_Content_LS7.exe
    Illustrator_16_Content_LS16.exe
    Download_and_Install_Instruction_all.pdf
    The last one is useless.
    The Speech Analyzer Models were downloaded separately, from another page.  I assume they should be installed after everything else is installed and working.

Maybe you are looking for