NEED MANDATORY IMMEDIATE HELP!!!!

I went to do a Music Quiz and my iPod nano froze! It's not on hold, but no buttons or the wheel work! So, I can't even turn it off! It's just frozen. I NEED HELP! WHAT DO I DO????!!!!

These are user-to-user support forums. Nobody here is paid to help you - we are all just users who enjoy helping others. As such, don't you think it would be more appropriate to ask for help than to demand it immediately?
Anyway,
try holding the MENU and SELECT (Center) buttons until you see the Apple logo to reset the ipod.
Cheers!
-Bryan

Similar Messages

  • In need of immediate help with FCP new user taking over colleagues position

    Good Morning. I am in urgent need of some help with a specific final cut pro question. My coworker and I have been working on a video project for our employer, a university. He ran the editor (FCP) and I ran the logistics of setting things up, keeping the contacts and scheduling, etc.
    He has left until late August and there are two major typos in his work which is posted to the web at the moment. I need to correct these typos and have less than a faint idea of how to do it.
    First of all, what is the file's last three letters? (.doc, .mov, etc...)
    Second, can I edit this as easily as I think I can? Just click in the text file along the bottom timeline and edit that way?
    How do I export the movie as an mp4 file after i have edited it.
    Anything else that would be deemed helpful is always appreciated!
    I really appreciate the help. I was never trained on this program because I never needed to be. Unfortunately, as it turns out, I did.
    Thanks for the help!

    You need to locate the Project file. Which will be somewhere in your colleague's User space.
    In the Finder, press command and F to activate the Find function.
    Make sure the following parameters are set:
    Search *This Mac* and Contents
    Kind is Documents
    Type the project name.
    The icon looks like this:
    Double click it to launch Final Cut Pro with the project.
    To locate the text overlay, click on the Timeline to make it active. Use the down arrow on your keyboard to jump from one cut to the next. The text overlay will look similar to this:
    Double click on the Text clip. This will place it in the Viewer (the left "monitor").
    Click the "Controls" tab above the Viewer and make your changes. Press Return.
    Clicking anywhere in the Timeline once more will update it.
    Make sure that no clips are selected and the Timeline is the active window.
    Go to the menu bar: File > Export > Using QuickTime Conversion.
    In the window that opens, make sure that Format is set to QuickTime Movie.
    Click the Options button. Look at the top of the next window.
    Does it say Compression Setting: H264? If it does, great.
    If not, click the settings button and choose H264 from the *Compression Type* button.
    At bottom left, drag the Quality slider to Best. Click OK.
    This brings you back to the previous window.
    Click on Size if you need to change something -there are a number of presets, but you can choose a custom size if you wish. Click OK.
    That window is dismissed and returns you to the Save dialog.
    Type a name and choose a destination for your file.
    Message was edited by: Nick Holmes

  • Serious problem - in need of immediate help

    Help meplease, i have placed a memory card in the reader of my 3000 n200 and now I can't get it out cause it's slipped in too far and I can't reach it.
    I really can't believe there is no other otpion than taking it apart to get out stuff that jammed in.  I mean, seriously.... If something gets in it's bye-bye reader?

    You need to locate the Project file. Which will be somewhere in your colleague's User space.
    In the Finder, press command and F to activate the Find function.
    Make sure the following parameters are set:
    Search *This Mac* and Contents
    Kind is Documents
    Type the project name.
    The icon looks like this:
    Double click it to launch Final Cut Pro with the project.
    To locate the text overlay, click on the Timeline to make it active. Use the down arrow on your keyboard to jump from one cut to the next. The text overlay will look similar to this:
    Double click on the Text clip. This will place it in the Viewer (the left "monitor").
    Click the "Controls" tab above the Viewer and make your changes. Press Return.
    Clicking anywhere in the Timeline once more will update it.
    Make sure that no clips are selected and the Timeline is the active window.
    Go to the menu bar: File > Export > Using QuickTime Conversion.
    In the window that opens, make sure that Format is set to QuickTime Movie.
    Click the Options button. Look at the top of the next window.
    Does it say Compression Setting: H264? If it does, great.
    If not, click the settings button and choose H264 from the *Compression Type* button.
    At bottom left, drag the Quality slider to Best. Click OK.
    This brings you back to the previous window.
    Click on Size if you need to change something -there are a number of presets, but you can choose a custom size if you wish. Click OK.
    That window is dismissed and returns you to the Save dialog.
    Type a name and choose a destination for your file.
    Message was edited by: Nick Holmes

  • In need of immediate help, please!!!

    I have Flash CS5 and have run into a bug that has clearly come up before on this forum and other places.  My file won't open and instead gives me the message "Flash can not parse this document".  This is work for a client that is due in just a few short days and I still have more to work on in the file.  I've tried to the best of my ability to do the fixes that I found on the forum but nothing is working.  Can I please, please, please get some help from an Adobe rep on this one (Tonight, if possible) ???
    Thanks!!!

    Moved this thread from Flash Pro FAQ sub-forum to Flash Pro - General sub-forum.

  • Unable to load attributes - in need of immediate help!!

    Hi,
    I have a problem that I hope you can help me with.
    I have a project structure which holds different amount of children, e.g
    Main Level Project
    Level Projcect
    Sub level project
    and
    Main Level Project
    Level Project
    I use two different rules for this, the first one rejects those that have Sub level project put as none, and the latter the ones where sub level is none, hence no sub level.
    Addning the attributes to the sub level projects is not an issue. However, adding the attributes to the project level, on the ones where no sub project level exists is not working. Is there something I should think extra about when loading on different generations? I use level 0, so it shouldn't be a problem?
    I'd be so grateful if you could help me with this!
    Thanks
    Kristin, Sweden

    Kristin,
    I did not understand the problem you described. By any chance are you referring to the Business Rules Engine in the application server and not the Rules Manager feature in the database ? If so, you should post this question in the following forum
    Business Process Management Suite
    Regards,
    -Aravind.

  • Need Immediate help...importing issue

         I work for a video editing company and today out of the blue, Premiere Pro started to act funny, its auto cropping clips that I am importing. It used to import these files fine and now its cutting them in half, I have tried all the basic stuff...I sort of also work IT here so the (re-install, reboot, try different settings) have all been done. The fact is it was doing it fine the other day and now it is making my workflow for the day grind to a halt until I figure this out.
    Immediate help/suggestions would be greatly appreciated.
                                                This is how its importing                                                                                 This his how it plays in a media player
    -Chris

    Im using Adobe Premiere CS5.5
    I have all updates
    Using windows 7 Pro
    Intel Core i7 2600K CPU @ 3.4Ghz
    16GB of ram
    64 bit OS
    source footage is:
    WMV File
    640x480
    2000kbps data rate
    29 fps
    I get no error codes
    this occurs immediatley when I drop it into premiere, and in the timeline and when I export.
    Thank you

  • Scrambled QT video on my PC... immediate help requested....

    Ive never had a problem with QT movies on my PC before, but for some reason every single .mov file I open is now scrambled or encoded and all I get is square chunks... with good audio. BUT... when I transfer them to my Mac G5, they play back just fine... and that is with the standard Quicktime version.
    I have Windows XP and I've had Quicktime Pro for a few years now with no difficulties... I have old and new .mov files on my hard drive that I have been playing on my PC with absolutely no problems, but all of a sudden... SCRAMBLE CITY BABY! Ive gone through some troubleshooting basics... like updating QT and directx...but to no avail.
    I consider myself somewhat technically savvy, as I am a graphics and program editor on both Macs and PCs. But this problem has got me scratching my head... I can usually solve these issues through these forums, but I cant seem to find the answer for my particular problem.
    Any immediate help would be very much appreciated... thanks!!

    Sounds like a graphics card driver or similar issues.
    Try this:
    Open the QuickTime Control Panel and click the advanced tab. Place a check mark (under the Video settings) for "Safe Mode" and try the file again. A quit and restart of QuickTime Player may be required.
    If "safe mode" works you may need to update your "driver" software before trying the "DirectX" features.

  • Query- Personnel Cost Planning-Immediate Help required

    Hi,
    I have a query.
    I am trying to Assign Percentage to Cost Item ( Personnel cost Planning)- Bonus which is a dependent cost item to Direct Cost Item-Base Salary but when I run the
    T. Code:- PHCPADMN the Bonus Percentage is not getting reflected and if I run the report-Plan data it is not showing any calculation of percentage.
    Kindly any immediate help is highly appreciable as I need to resolve it ASAP.
    Regards,
    Happy

    Hi Soniya
    I think you should look into following links:
    help.sap.com/printdocu/core/Print46c/en/data/pdf/PACMCP/PACMCP.pdf
    help.sap.com/saphelp_46c/helpdata/en/fd/45a4f79d6411d189b60000e829fbbd/content.htm
    Thanks
    Yash

  • I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

    I need advise and help with this problem .
    First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
    At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
    In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
    Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
    trace in Spotlight , Library . Nothing could be find .
    Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
    ''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
    With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
    I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
    Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

    Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
    To remove it, see:
    http://www.thesafemac.com/arg-genieo/
    Do not use the Genieo uninstaller!

  • Need a little help new to mac

    Need a little help I'm new to Mac.. i have had my ibook for over a year now and i like it a lot, but some times my usb post dies on my for a couple days maybe weeks. Ill have my ipod connected and when i go to plug in a flash drive. It doesn't detect my ipod anymore and my usb port don't work. it says that they were "removed improperly" and now they are not working again..i have tried to reinstall the whole os again and that doesn't work i don't have the hardware test disk so i don't know what could be the problem i know its not the logic board is there any test i can do to it to find out the problem its an ibook late 2001... there is no reset button on it. i tried to hold in the space bar and now when i boot up i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up im a mess need some help

    +it says that they were "removed improperly"+
    You have to go to the iPod's icon on your computer (or the flash drive's icon), select it and eject it there before removing it. Otherwise, data can be corrupted and/or lost. Repeatedly removing it without ejecting it from the desktop can cause it not to be recognized any longer.
    If your iBook is a "late 2001" model. It should have a reset button. Check out the chart here to make sure which model iBook you have:
    http://support.apple.com/kb/HT1772?viewlocale=en_US
    +i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up+
    It's trying to find a network volume from which to boot.
    Once it's booted up, go to System Preferences > Startup Disk, and select your Mac OS X startup volume. Then close System Preferences. The next time you start up, it should start up without looking for a network volume.

  • In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC'  so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or Tip

    In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC'  so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or some Tips.I have already tried many things to iTunes and my PC like trying to restore my PC but that do anything.Also,would it be fine if i contacted (call) Apple Support? Please,I need help because what I think is wrong is my PC,iPhone,or USB might be messed up so if anyone could help me with this,it would be really helpful and for anyone to be nice enough to help me.

    I think this article will help you.

  • I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

    I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

    Hi olivias,
    It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
    How to change the default application for a file type | Macworld
    http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
    Please let us know if you have additional questions.
    Best,
    Sara

  • Hard Drive Failure on HP DV 6000 Pavilion laptop Windows-XP​sp3 OS - Need Data Recovery Help

    Hard Drive Failure on HP DV 6000 Pavilion laptop - Need Data Recovery Help
    HP Pavilion DV 6108 NR, RG365UA, purchased in late 2006 at Best Buy, with Windows XP, upgraded to Service Pack 3. It has a Fujitsu hard disk, 60 gigabyte, partitioned into C: and a Recovery D:.
    Windows tries to boot up, but goes to blue screen with the message: "Unmountable Boot Volume" for one second, then just keeps recycling until I force a shutdown.
    BIOS Phoenix, hard drive test result: " #1-08 Fail "
    I ran a disk analysis/recovery program on the Cdrive and it seemed to show the directory structure intact, and it was able to recover some files. I was using the free one from Seagate (which only recovers small files). The second pass didn't run so well, and during the third run the program said I should not proceed further, and I should contact a professional disk recovery company.
    However, the D drive seems to be intact, so, I wonder if the disk is corrupted or just some aspect of the logical C drive is bad.
    How can I get the D: to run the recovery software on it? The recovery disks, made by Best Buy, only proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
    Tapping the F10 key during startup gets me nowhere. Ditto the F11 key.
    I dont care about the hard disk; it is the data (files, docs, images, etc)  that I want.
    I contacted HP to order recovery disks but they are no longer available for my computer.
    Any suggestions would be greatly appreciated!
    Jon
    This question was solved.
    View Solution.

    Update...
    I found a website that offers the following:
    http://www.computersurgeons.com/p-13442-recovery-k​it-435422-001-for-hp-model-number-dv6108nr.aspx
    Recovery Kit 435422-001 For HP Model Number dv6108nr
    Price: $27.00
    Recovery Kit Set (An Entire Image of the Computer hard drive when the computer was new)
    But I wonder how useful it would be. Early XP , no doubt. And if my hard disk problem is a mechanical fault, would any recovery disk even work? The disks made by Best Buy when I bought mine new in 2006 don't do anything more than go to the R /F/ Q screen and then goes to a blue screen when I press R (to recover the OS and apps and data files). And, as I wrote, it is the data that I want, not the disk drive.

  • Need some quick help - fairly urgent!

    I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
    This is the layout I'm dealing with..
    All the boxes have been made in Illustrator
    The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
    My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
    I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

    I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
    Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
    Date: Wed, 30 Nov 2011 08:48:07 -0700
    From: [email protected]
    To: [email protected]
    Subject: Need some quick help - fairly urgent!
        Re: Need some quick help - fairly urgent!
        created by Peter Spier in InDesign - View the full discussion
    There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in InDesign by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I need some help adding music to my slideshow in iPhoto.  When I open iTunes as the source, it says it needs to be open to populate, which it is.  I have no knowledge of computers...like, at all....so I need some (simple) help?  If possible?  Thanks.

    When I open iTunes as the source, it says it needs to be open to populate, which it is.  I have no knowledge of computers...like, at all....so I need some (simple) help?  If possible?  Thanks.

    When I open iTunes as the source, it says it needs to be open to populate, which it is.  I have no knowledge of computers...like, at all....so I need some (simple) help?  If possible?  Thanks.

Maybe you are looking for