Need of an ABAP Program

Hi all,
I actually needed the name of the program that can search and give all the programs that contain a specific string. I know it exists, but I am not able to recollect the name.
Rewards for a quick answer.
Thanks,
Vivek

Thanks a lot you guyz, you all have been rewarded
thanks once again..
Vivek

Similar Messages

How to add Abap program in process chain to check the another process chain status and do accordingly

Hello All,
My requirement is related to process chain 1 . I have one process chain in that i have to put abap program in middle of that chain . This program will check the status of one another process chain 2 status ( whether it was completed or it is going on). if it is completed then continue the Process chain 1 to further activity else wait to complete Process chain 2 .
Here i have to use process chain 2 as a parameter.
Kindly provide me solution .
Regards
Saurabh

Hi Saurabh,
You need to create ABAP program in which you check the values for required process chain in
following table
RSPCLOGCHAIN (Feilds ANALYZED_STATUS LOG_ID)
Depend on values you can trigger next process or you can wait unitil this process chain complete.you need to check status from table using ABAP.
If you are not aware about how to write ABAP program then take help from ABAP Team.
Regards,
Ganesh Bothe

ABAP Program for Processchain..

I have one processchain that is running my manually.
if processchain running means need a output like processchain running.if processchain not running/completed
i need a output like process completed.so finaly i need to develop abap program for my processchain.any one write program for my processchain?

Hi,
REPORT ZPROCESSCHAINLOG.
TABLES rspclogchain.
DATA: gt_rspclogchain LIKE rspclogchain OCCURS 0,
      wa_rspclogchain LIKE rspclogchain.
DATA: gt_log LIKE rspc_s_msg OCCURS 0,
      wa_log LIKE rspc_s_msg,
      log type c.
SELECT * FROM rspclogchain
INTO CORRESPONDING FIELDS OF TABLE gt_rspclogchain
WHERE datum eq sy-datum
AND chain_id = YOUR PROCESSCHAINID.
IF sy-subrc = 0.
SORT gt_rspclogchain BY datum DESCENDING
                           zeit DESCENDING.
READ TABLE gt_rspclogchain
       INTO wa_rspclogchain INDEX 1.
CALL FUNCTION 'RSPC_API_CHAIN_GET_LOG'
    EXPORTING
      i_chain = wa_rspclogchain-chain_id
      i_logid = wa_rspclogchain-log_id
    TABLES
      e_t_log = gt_log.
IF sy-subrc = 0.
    LOOP AT gt_log INTO wa_log.
      if wa_log-msgv4 = 'Successfully completed'.
        log = 1 .
      endif.
    ENDLOOP.
    if log = 1.
      WRITE: / 'Processchain completed'.
    ELSE.
      WRITE :/ 'processchain is running'.
    endif.
ELSEIF sy-subrc <> 0.
    WRITE :/ 'Not scheduled'.
endif.
endif.
Best Regards,
Thangesh

Sample Client proxy abap program

Hi,
Need a sample abap program to select multiple records.
Any help appreciated. There is one for single record, but not for multiple records.
Thanks
felix.

Hi Felix,
Is your requirement that you want to selects multiple records from the same table? Kindly elaborate on it. In the meanwhile you can have a look these links:
http://www.sap-basis-abap.com/abap/difference-between-select-single-and-up-to-1-row.htm
http://www.geocities.com/SiliconValley/Grid/4858/sap/index.htm
http://www.geocities.com/SiliconValley/Grid/4858/sap/ABAPCode/index.htm
These contain some code snippets see if it would satisfy your requirements.
Cheers,
Chandra

I need hr abap programs and syntax?

i need hr abap programs and syntax?

Check with below one example :
REPORT ZPETROL_EXCLUDE .
TABLES SSCRFIELDS.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECTION-SCREEN SKIP 9.
PARAMETERS NUMBER(200) TYPE C.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN:
BEGIN OF LINE,
PUSHBUTTON 2(10) TEXT-001 USER-COMMAND PROC,
END OF LINE.
SELECTION-SCREEN END OF SCREEN 100.
CALL SCREEN 100.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'PROC'.
SET PARAMETER ID: 'NUM' FIELD NUMBER.
CALL TRANSACTION 'ZP_PALLOWANCE'.
LEAVE TO SCREEN 0.
ENDCASE.
SECOND PRG
REPORT ZPR_PETROL_ALLOWANCE NO STANDARD PAGE
HEADING .
*-- Infotypes
INFOTYPES : 0000, "Actions
0002, "Personal Data
0008. "Basic pay details
*-- Tables
TABLES : PERNR, "Standard Selections for HR Master Data Reporting
PC207, "Payroll Results: Results Table
PCL1, "HR Cluster 1
PCL2, "HR Cluster 2
T510, "Pay scales
T549A, "Payroll areas
T549Q, "Payroll Periods
PA0002. "Personal details
*-- Internal Tables
*-- Internal Table Declaration For Holding The Data
DATA: BEGIN OF INT_PETROL OCCURS 0,
PERNR LIKE PA0008-PERNR, "Personnel Number
TRFST LIKE PA0008-TRFST, "Pay Scale Level
NAME(40), "Name of Employee
PALLOWANCE TYPE P DECIMALS 2, "Petrol Allowance Amount
END OF INT_PETROL.
DATA: BEGIN OF PA0015_DATA OCCURS 0,
PERNR LIKE PA0015-PERNR,
BETRG LIKE PA0015-BETRG,
END OF PA0015_DATA.
DATA:BEGIN OF INT_PETROL2 OCCURS 0,
PERNR LIKE PA0008-PERNR, "Personnel Number
VORNA LIKE PA0002-VORNA, "First Name
NACHN LIKE PA0002-NACHN, "Last Name
TRFST LIKE PA0008-TRFST, "Pay Scale Level
NAME(40), "Name of Employee
PALLOWANCE TYPE P DECIMALS 2, "Petrol Allowance Amount
END OF INT_PETROL2.
DATA : TITLE TYPE LVC_TITLE.
DATA: BEGIN OF PER_NO OCCURS 0,
PERNR LIKE PA0008-PERNR,
TRFST LIKE PA0008-TRFST,
END OF PER_NO.
DATA: BEGIN OF MSG OCCURS 0,
MSG1(100) TYPE C,
END OF MSG.
DATA: FLAG TYPE I VALUE '0',
DIS_FLAG TYPE I VALUE '0'.
DATA: INT_PETROL3 LIKE STANDARD TABLE OF INT_PETROL2 INITIAL SIZE 0
WITH HEADER LINE.
DATA: INT_PETROL1 LIKE STANDARD TABLE OF INT_PETROL INITIAL SIZE 0 WITH
HEADER LINE.
DATA: WA_PET_ALLOWANCE TYPE ZBPETROL_ALL. "WORKAREA FOR INSERTING
VALUES.
*DATA: P_LGART1 LIKE T512T-LGART VALUE '0010'. "CHANGE WAGE TYPE HERE
DATA: P_LGART1 LIKE T512T-LGART VALUE '0077'. "CHANGE WAGE TYPE HERE
DATA: BEGIN OF INT_0015 OCCURS 0,
PERNR(038),
BEGDA(010),
BETRG(018),
END OF INT_0015.
*-- Internal Table To Store Error Records.
DATA: E_INT_0015 LIKE INT_0015 OCCURS 0 WITH HEADER LINE.
*-- Batch Input Data of Single Transaction
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*-- Internal Table For Export and Import Payroll Results
DATA: INT_RGDIR LIKE PC261 OCCURS 0 WITH HEADER LINE,
LGTXT LIKE T512T-LGTXT.
DATA: BEGIN OF EMP_NO OCCURS 0,
PERNR(4) TYPE C,
END OF EMP_NO.
DATA: BEGIN OF EMP_NO1 OCCURS 0,
PERNR TYPE I,
END OF EMP_NO1.
DATA EMPNO LIKE STANDARD TABLE OF EMP_NO INITIAL SIZE 0.
DATA EMPNO1 LIKE STANDARD TABLE OF EMP_NO1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA LEN1 TYPE I.
DATA: ERR LIKE MESSAGE.
DATA TEMP_NUM(200) TYPE C.
*-- Includes
*-- International Include
INCLUDE RPC2CD09. "Cluster CD data definition
INCLUDE RPC2CA00. "Cluster CA Data-Definition
INCLUDE RPPPXD00. "Data Definition buffer PCL1/PCL2 Buffer INCLUDE RPPPXD10.
"Common part buffer PCL1/PCL2 INCLUDE RPPPXM00. "Buffer Handling routine
*-- Country Specific Include
INCLUDE PC2RXIN0. "Cluster IN data definition
INCLUDE RPC2RX09.
*-- ALV Declaration
TYPE-POOLS : SLIS.
DATA: INT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
INT_EVENTS TYPE SLIS_T_EVENT,
INT_LAYOUT TYPE SLIS_LAYOUT_ALV,
WS_EVENTS TYPE SLIS_ALV_EVENT,
WS_REPID LIKE SY-REPID.
*-- Initialization
INITIALIZATION.
WS_REPID = SY-REPID.
*-- At Selection-Screen
START-OF-SELECTION.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) TEXT-002.
SELECTION-SCREEN POSITION 33.
PARAMETERS: P_RATE TYPE P DECIMALS 2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF BLOCK B3.
PARAMETERS: P_UPLOAD AS CHECKBOX,
P_FG RADIOBUTTON GROUP G1,
P_BG RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B4.
PARAMETERS: P_DI AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK B4.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN.
*-- Wate Type Text
SELECT SINGLE LGTXT INTO LGTXT FROM T512T WHERE SPRSL = 'E' AND
MOLGA = '40' AND LGART = P_LGART1 .
*-- Data Retrieval From Logical Database PNP
GET PERNR.
PROVIDE PERNR FROM P0000 VORNA NACHN FROM P0002 BETWEEN PN-BEGDA AND
PN-ENDDA.
INT_PETROL1-PERNR = P0000-PERNR.
CONCATENATE P0002-VORNA P0002-NACHN INTO INT_PETROL1-NAME SEPARATED
BY SPACE.
ENDPROVIDE.
*-- Clear Data
CLEAR: RGDIR, INT_RGDIR.
REFRESH: RGDIR, INT_RGDIR.
*-- Read All The Payroll Runs For An Employee
CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
CHECK RP-IMP-CD-SUBRC EQ 0.
*-- Clear Data
REFRESH: RT.
Read IN Cluster.
LOOP AT RGDIR WHERE FPBEG >= PN-BEGDA AND FPEND <= PN-ENDDA.
MOVE-CORRESPONDING RGDIR TO INT_RGDIR.
APPEND INT_RGDIR.
CLEAR INT_RGDIR.
ENDLOOP.
Read the last record.
SORT INT_RGDIR BY SEQNR DESCENDING.
READ TABLE INT_RGDIR INDEX 1.
RX-KEY-SEQNO = INT_RGDIR-SEQNR.
RX-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-IN.
CHECK RP-IMP-IN-SUBRC EQ 0.
READ TABLE RT WITH KEY LGART = P_LGART1.
IF SY-SUBRC = 0.
INT_PETROL1-PALLOWANCE = RT-BETRG.
ENDIF.
APPEND INT_PETROL1.
CLEAR INT_PETROL1.
SELECT TRFST PERNR
INTO CORRESPONDING FIELDS OF TABLE PER_NO
FROM PA0008
WHERE TRFST LIKE 'L%'
AND BET01 > 0.
SORT PER_NO.
DELETE ADJACENT DUPLICATES FROM PER_NO.
*-- END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT INT_PETROL1.
READ TABLE PER_NO WITH KEY PERNR = INT_PETROL1-PERNR.
IF SY-SUBRC = 0.
INT_PETROL-TRFST = PER_NO-TRFST.
MODIFY INT_PETROL1 FROM INT_PETROL TRANSPORTING TRFST.
ENDIF.
ENDLOOP.
SORT INT_PETROL1.
DELETE ADJACENT DUPLICATES FROM INT_PETROL1.
CONCATENATE 'From' ' : ' PN-BEGDA6(2) '.' PN-BEGDA4(2) '.' PN-
BEGDA+0(4)
' To' ' : ' PN-ENDDA6(2) '.' PN-ENDDA4(2) '.' PN-ENDDA+0(4)
INTO TITLE.
IF P_DI = 'X'. "TO DISPLAY PETROL ALLOWANCE ONLY
IF PNPTIMRA = 'X'. "CHECK OTHER PERIOD CHECKED
DIS_FLAG = 1.
ENDIF.
IF PNPTIMR9 = 'X'. "CHECK TO SEE CURRENT PERIOD SELECTED
CASES - NO RATE GIVEN, RATE GIVEN
CURRENT PERIOD UPLOADED BUT PAYROLL NOT WRITTEN SO NO RESULT FROM LDB
SELECT RATE INTO P_RATE FROM ZBPETROL_ALL WHERE BEGDA = PN- BEGDA AND ENDDA = PN-ENDDA.
ENDSELECT.
IF SY-DBCNT = 0.
MESSAGE I455(0) WITH 'NO PETROL RATE EXSISTS'.
ELSE.
FLAG = 1.
ENDIF. "OF SY-DBCNT
IF P_RATE > 0 AND FLAG = 1. " PETROL RATE EXSISTS.
SELECT PERNR SUM( BETRG ) INTO TABLE PA0015_DATA
FROM PA0015
WHERE BEGDA BETWEEN PN-BEGDA AND PN-ENDDA
GROUP BY PERNR.
SELECT APERNR ATRFST BVORNA BNACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON BPERNR = APERNR
WHERE A~TRFST LIKE 'L%'
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE PA0015_DATA WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC = 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
INT_PETROL-PALLOWANCE = PA0015_DATA-BETRG.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
DIS_FLAG = 1.
ENDIF. "P_RATE > 0 AND FLAG = 1.
IF P_RATE > 0 AND FLAG = 0. "CURRENT PERIOD AND DATA NOT UPLOADED
SELECT APERNR ATRFST BVORNA BNACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON BPERNR = APERNR
WHERE A~TRFST LIKE 'L%'
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
PERFORM GET_VALUE. "TO CONVERT THE FIRST SCREEN PERNR INTO
NUMBER FORMATE
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE EMPNO1 WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC <> 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
PERFORM CAL_ALLOWANCE.
ENDIF. " OF P_RATE > 0
DIS_FLAG = 1.
ENDIF. " OF CURRENT PERIOD CHECK.
ENDIF. " OF CHECK DISPLAY.
*----BDC
IF P_UPLOAD = 'X'.
IF PNPTIMRA = 'X'. "CHECK OTHER PERIOD CHECKED
MESSAGE I455(0) WITH 'Petrol Allowance cannot be uploaded'.
LEAVE SCREEN.
ENDIF.
IF P_RATE > 0.
IF P_RATE > 0 OR P_RATE = 0.
IF PNPTIMR9 = 'X'. "CHECK TO SEE CURRENT PERIOD SELECTED
WA_PET_ALLOWANCE-BEGDA = PN-BEGDA.
WA_PET_ALLOWANCE-ENDDA = PN-ENDDA.
WA_PET_ALLOWANCE-RATE = P_RATE.
WA_PET_ALLOWANCE-CURR = 'INR'.
INSERT INTO ZBPETROL_ALL VALUES WA_PET_ALLOWANCE.
SELECT A~PERNR A~TRFST B~VORNA B~NACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON B~PERNR = A~PERNR
WHERE A~TRFST IN ('L1' , 'L2' , 'L3')
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
PERFORM GET_VALUE. "TO CONVERT THE FIRST SCREEN PERNR INTO
NUMBER FORMATE
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE EMPNO1 WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC <> 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
PERFORM CAL_ALLOWANCE.
DIS_FLAG = 1.
SORT INT_PETROL1.
LOOP AT INT_PETROL1.
MOVE: INT_PETROL1-PERNR TO INT_0015-PERNR,
INT_PETROL1-PALLOWANCE TO INT_0015-BETRG.
CONCATENATE PN-ENDDA6(2) PN-ENDDA4(2) PN-ENDDA+0(4) INTO
INT_0015-BEGDA SEPARATED BY '.'.
APPEND INT_0015.
CLEAR INT_0015.
ENDLOOP.
LOOP AT INT_0015.
PERFORM F_BDCDATA.
IF P_FG = 'X'.
CALL TRANSACTION 'PA30' USING BDCDATA MODE 'A' UPDATE 'S'.
ELSE.
CALL TRANSACTION 'PA30' USING BDCDATA MODE 'N' UPDATE 'S'.
ENDIF.
*-- Handling Error records.
IF SY-SUBRC <> 0.
*-- Handling Error Messages
PERFORM ERROR_MSG.
MOVE-CORRESPONDING INT_0015 TO E_INT_0015.
APPEND E_INT_0015.
CLEAR E_INT_0015.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
*-- Downloading Error Records.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\Errors.Txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = E_INT_0015.
*-- Downloading Error Messages.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\Err_Msg.Txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = MSG.
ENDIF. " FOR CURRENT PERIOD
ENDIF.
ELSE.
MESSAGE I455(0) WITH 'Enter Petrol Rate'.
LEAVE TO SCREEN 0.
ENDIF. " FOR PETROL RATE
ENDIF. " FOR UPLOAD
IF DIS_FLAG = 1.
INT_LAYOUT-SUBTOTALS_TEXT = TEXT-004.
INT_LAYOUT-TOTALS_TEXT = TEXT-004.
INT_LAYOUT-ZEBRA = 'X'.
PERFORM FILL_FIELDCAT.
PERFORM GET_EVENTS_ALV.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = WS_REPID
IS_LAYOUT = INT_LAYOUT
IT_FIELDCAT = INT_FIELDCAT[]
I_DEFAULT = 'X'
I_SAVE = 'X'
IT_EVENTS = INT_EVENTS
TABLES
T_OUTTAB = INT_PETROL1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*& Form GET_VALUE
text
FORM GET_VALUE.
GET PARAMETER ID: 'NUM' FIELD TEMP_NUM.
IF TEMP_NUM <> ''.
LEN1 = STRLEN( TEMP_NUM ).
PERFORM GET_PERNR.
APPEND TEMP_NUM TO EMPNO.
LOOP AT EMPNO INTO EMP_NO.
CALL FUNCTION 'CHECK_AND_CONVERT_NUMERICS'
EXPORTING
DFELD = ' '
DMZEI = ','
DTYPE = 'STRING'
DYPNO = ' '
EFELD = EMP_NO-PERNR
FNAME = ' '
PROGR = ' '
IMP_DECIMALS = '0'
IMPORTING
ERROR =
IFELD = EMP_NO1-PERNR
MESSG = ERR
MSGLN =
IF ( ERR-MSGID = '' ).
APPEND EMP_NO1 TO EMPNO1.
CLEAR EMP_NO1-PERNR.
ELSE.
MESSAGE I455(0) WITH 'Could not convert employee number'.
LEAVE TO SCREEN 0.
ENDIF.
ENDLOOP.
ENDIF.
ENDFORM. "GET_VALUE
*& Form GET_PERNR
text
FORM GET_PERNR.
SPLIT TEMP_NUM AT ',' INTO EMP_NO TEMP_NUM.
APPEND EMP_NO TO EMPNO.
CLEAR EMP_NO.
SEARCH TEMP_NUM FOR ','.
IF SY-SUBRC = 0.
PERFORM GET_PERNR.
ENDIF.
ENDFORM. "GET_PERNR
*& Form ERROR_MSG
text
--> p1 text
<-- p2 text
FORM ERROR_MSG.
IF SY-SUBRC <> 0.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
LANG = SY-LANGU
IMPORTING
MSG = MSG-MSG1.
APPEND MSG.
CLEAR MSG.
ENDIF.
ENDFORM. "ERROR_MSG
*& Form F_BDCDATA
text
FORM F_BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPMP50A' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=INS'.
PERFORM BDC_FIELD USING 'RP50G-PERNR'
INT_0015-PERNR.
PERFORM BDC_FIELD USING 'RP50G-TIMR6'
'X'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RP50G-CHOIC'.
PERFORM BDC_FIELD USING 'RP50G-CHOIC'
'0015'.
PERFORM BDC_DYNPRO USING 'MP001500' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'Q0015-BETRG'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'P0015-LGART'
'0077'. "CHANGE WAGE TYPE HERE
ALSO
PERFORM BDC_FIELD USING 'Q0015-BETRG'
INT_0015-BETRG.
PERFORM BDC_FIELD USING 'P0015-WAERS'
'INR'.
PERFORM BDC_FIELD USING 'P0015-BEGDA'
INT_0015-BEGDA.
PERFORM BDC_DYNPRO USING 'MP001500' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'P0015-LGART'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=UPD'.
PERFORM BDC_FIELD USING 'P0015-LGART'
'0077'. "CHANGE WAGE TYPE HERE
ALSO
PERFORM BDC_FIELD USING 'Q0015-BETRG'
INT_0015-BETRG.
PERFORM BDC_FIELD USING 'P0015-WAERS'
'INR'.
PERFORM BDC_FIELD USING 'P0015-BEGDA'
INT_0015-BEGDA.
ENDFORM. "F_BDCDATA
*& Form BDC_DYNPRO
text
-->P_0732 text
-->P_0733 text
FORM BDC_DYNPRO USING VALUE(P_0732) TYPE C
VALUE(P_0733) TYPE C.
CLEAR BDCDATA.
BDCDATA-PROGRAM = P_0732.
BDCDATA-DYNPRO = P_0733.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. " BDC_DYNPRO
*& Form BDC_FIELD
text
-->P_0755 text
-->P_0756 text
FORM BDC_FIELD USING VALUE(P_0755) TYPE C
VALUE(P_0756) TYPE C.
CLEAR BDCDATA.
BDCDATA-FNAM = P_0755.
BDCDATA-FVAL = P_0756.
APPEND BDCDATA.
ENDFORM. " BDC_FIELD
*& Form CAL_ALLOWANCE
text
FORM CAL_ALLOWANCE.
LOOP AT INT_PETROL1 INTO INT_PETROL.
IF INT_PETROL-TRFST = 'L1'.
INT_PETROL-PALLOWANCE = P_RATE * 100. "CHANGE TO SELECT WHEN
DISPLAY
ELSEIF INT_PETROL-TRFST = 'L2'.
INT_PETROL-PALLOWANCE = P_RATE * 150.
ELSEIF INT_PETROL-TRFST = 'L3'.
INT_PETROL-PALLOWANCE = P_RATE * 150.
ELSEIF INT_PETROL-TRFST = 'L4'.
INT_PETROL-PALLOWANCE = P_RATE * 200.
ELSEIF INT_PETROL-TRFST = 'L5'.
INT_PETROL-PALLOWANCE = P_RATE * 250.
ENDIF.
MODIFY INT_PETROL1 FROM INT_PETROL TRANSPORTING PALLOWANCE.
ENDLOOP.
ENDFORM. "CAL_ALLOWANCE
*& Form FILL_FIELDCAT
text
--> p1 text
<-- p2 text
FORM FILL_FIELDCAT.
INT_FIELDCAT-COL_POS = 1.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'PERNR'.
INT_FIELDCAT-SELTEXT_L = TEXT-005.
INT_FIELDCAT-OUTPUTLEN = 10.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 2.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'NAME'.
INT_FIELDCAT-SELTEXT_L = TEXT-006.
INT_FIELDCAT-OUTPUTLEN = 25.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 3.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'TRFST'.
INT_FIELDCAT-SELTEXT_L = TEXT-007.
INT_FIELDCAT-OUTPUTLEN = 5.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 4.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'PALLOWANCE'.
INT_FIELDCAT-SELTEXT_L = TEXT-008.
INT_FIELDCAT-OUTPUTLEN = 16.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
ENDFORM. " FILL_FIELDCAT
*& Form GET_EVENTS_ALV
text
--> p1 text
<-- p2 text
FORM GET_EVENTS_ALV.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 1
IMPORTING
ET_EVENTS = INT_EVENTS[]
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE INT_EVENTS INTO WS_EVENTS WITH KEY NAME =
SLIS_EV_TOP_OF_PAGE.
IF SY-SUBRC = 0.
WS_EVENTS-FORM = 'TOP'.
MODIFY INT_EVENTS FROM WS_EVENTS INDEX SY-TABIX.
ENDIF.
ENDFORM. " GET_EVENTS_ALV
*& Form TOP-OF-PAGE
text
FORM TOP.
*-- ALV Declarations
DATA: WS_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER TYPE SLIS_LISTHEADER.
*-- Title
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = TEXT-009.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = TITLE.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = ' '.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = ' '.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = WS_HEADER
I_LOGO = 'LOGO'.
ENDFORM. "TOP-OF-PAGE
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
For Personal Admn the Infotypes start with PA0000 to PA1999
Time Related Infotypes start with PA2000 to PA2999.
Orgn related Infotypes start with HRP1000 to HRP1999.
All custom developed infotypes stsrat with PA9000 onwards.
In payroll processing we use Clusters like PCL1,2,3 and 4.
Instead of Select query we use PROVIDE and ENDPROVIDE..
You have to assign a Logical Database in the attributes PNP.
Go through the SAp doc for HR programming and start doing.
http://www.sapdevelopment.co.uk/hr/hrhome.htm
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
sites regarding hr-abap:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
These are the FAQ's that might helps you as well.
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.atomhr.com/library_full.htm
HR Long texts Upload
Look at the below link
BDC - hr maintain text
Please refer to the following sample program for accessing PCH LDB.
For concept to start with refer url:
http://www.sap-press.de/download/dateien/860/sappress_mysap_hr_technical_principles2.pdf
It contains info regarding PCH Reporting.
REPORT zhsol010.
TABLES: objec, gdstr.
INFOTYPES: 0002, 0006, 1003.
DATA: stabs LIKE p1003-stabs,
name LIKE p0001-ename.
INITIALIZATION.
pchotype = 'O'.
pchwegid = 'O-S-P'.
GET objec.
IF objec-otype = 'S'.
CLEAR stabs.
LOOP AT p1003 WHERE begda LE pc-endda
AND endda GE pc-begda.
IF p1003-stabs = 'X'.
stabs = 'X'.
WRITE : / objec-objid, objec-short, objec-stext.
ENDIF.
ENDLOOP.
ENDIF.
IF objec-otype = 'P' AND stabs = 'X'.
PROVIDE vorna nachn FROM p0002
subty telnr FROM p0006
BETWEEN pc-begda and pc-endda
WHERE p0006-subty = '1'.
IF p0006_valid = 'X'.
CONCATENATE p0002-vorna p0002-nachn INTO name
SEPARATED BY space.
WRITE: / name, p0006-telnr.
SKIP.
ENDIF.
ENDPROVIDE.
ENDIF.
sample code:
REPORT zpwtest .
TABLES : t001 .
TYPE-POOLS slis .
DATA : t_t001 TYPE TABLE OF t001 ,
t_abaplist TYPE TABLE OF abaplist .
DATA : w_abaplist TYPE abaplist .
SELECT-OPTIONS : s_bukrs FOR t001-bukrs OBLIGATORY .
PARAMETERS : p_list TYPE c NO-DISPLAY .
START-OF-SELECTION .
IF sy-batch = 'X' AND p_list IS INITIAL .
Submit report and get list in memory
SUBMIT zpwtest EXPORTING LIST TO MEMORY
WITH s_bukrs IN s_bukrs
WITH p_list = 'X'
AND RETURN.
Get the list from memory.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = t_abaplist
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Send report to mail receipent
PERFORM send_mail .
ELSE.
PERFORM select_data .
PERFORM display_data .
ENDIF.
*SO_NEW_DOCUMENT_SEND_API1
*& Form select_data
FORM select_data.
SELECT *
INTO TABLE t_t001
FROM t001
WHERE bukrs IN s_bukrs .
ENDFORM. " select_data
*& Form display_data
FORM display_data.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_structure_name = 'T001'
TABLES
t_outtab = t_t001
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_data
*& Form send_mail
FORM send_mail.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
Fot external email id
receiver_list-recextnam = '[email protected]'.
receiver_list-recesc = 'E'.
receiver_list-sndart = 'INT'.
receiver_list-sndpri = '1'.
FOr internal email id
receiver_list-recnam = sy-uname .
receiver_list-esc_des = 'B'.
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = t_abaplist
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
ENDFORM. " send_mail
Check this links,
https://forums.sdn.sap.com/click.jspa?searchID=4564732&messageID=3009173
https://forums.sdn.sap.com/click.jspa?searchID=4564732&messageID=2198920
https://forums.sdn.sap.com/click.jspa?searchID=4564732&messageID=1714842
https://forums.sdn.sap.com/click.jspa?searchID=4564732&messageID=2232979
Regards
vasu

Need one abap program.....pls help

Hi all,
i have need one ABAP program , which can dispaly how many same number of charecter are there.
ex : my input is suresh.
output is,,,
2 - s
1 - u
1 - r
just like that..
pls help me..
thanks in advance.
indu

Hello
Try this:
data: string(100),
      length type i.
data: begin of itab occurs 0,
      chart,
      count type i,
      end of itab.
string = 'suresh'.
length = strlen( string ).
do length times.
length = length - 1.
clear itab.
itab-chart = string+length(1).
itab-count = 1.
collect itab.
enddo.
loop at itab.
write: itab-chart, itab-count. new-line.
endloop.

LSMW or ABAP Program:- I need BAPI function module or Direct input program

hi experts,
I have to develop the program which uploads the transportation pricing data for freight cost management.
the transcation code is XK15 for the application A.
There is a program called RV14BTCI which will uploads for the application V or M not for A.
So i can use lsmw or direct input program in both lsmw and abap program so plz help me if there is any BAPI function module or Direct input program for Application A.
thank you,
waiting for u r reply.
Edited by: SANTOSH MARUPALLY on Jan 22, 2008 6:27 AM

Hi Santosh
Am not really sure if RV14BTCI can not be used for other applications apart from V and M.
You can try using BAPI: BAPI_PRICES_CONDITIONS. Over the forum you can find few example coding.
Regards
Eswar

Need to find SAP query for corresponding ABAP program.

Hello SAP Experts,
I have an ABAP program "AQDESYSTQV000001ORDERDETAILS==" in ECC 4.7. We had a client copy recently from ECC 4.7 to ECC 6.0. Now in ECC 6.0 I am unable to find this program in SE38.
Can you please tell me how to create this program in ECC 6.0 ? Also, by the name of this program it is clearly seen that this program is automatically created by using SAP query.
I tried to generate the program using SQ01, but system asks me for the SAP query.
Can you please tell me how to find the SAP Query for the corresponding abap program ? Also, the steps as in how to generate the program in ECC 6.0.
Thanks.

Hi Danish,
In the program name, the query name is always attached.
For example : The program name is , AQ10SD==========Z10SD_INVPRODL=
Here the query name is Z10SD_INVPRODL and if you go to transaction SQ01 and enter the query name
then you can find the infoset.
And also you can gernate the program with the help of query name.
Please try the same and let me know if any details are required.
Regards,
Darshana

How to get a parameter from BPC and use it in ABAP program

Hello gurus!
I got a problem...
SAP BPC will send parameters such as year, division, category, company code and so on via script logic to SAP BW.
I need to get these parameters from BPC and use them in a ABAP program as a filter.
This ABAP program will do several routines and return new values to BPC. It must be made on ABAP and I need to filter data to avoid performance issues.
Does anybody knows how to do it? or have a example of it?
Thank you in advance.
Regards,
Rubens Kumori

Hello, I'm looking for a suggest.
I need to pass two parameters (users can input them in a data manager package in bpc) to a BAdI.
In this BAdI I write a code that store those parameters in a InfoObject.
The problem is:
- one parameter is for CATEGORY value. CATEGORY is a dimension of the application and I read the value with a code like this:
      READ TABLE it_cv INTO l_s_it_cv
           WITH TABLE KEY dim_upper_case = 'C_CATEGORY'.
- other parameter is a generic DATE. this parameter is not a dimension of the application and I don't know how I can retrieve this value in BAdI.
      READ TABLE it_cv INTO l_s_it_cv
           WITH TABLE KEY dim_upper_case = '.....'.
The data manager dynamic script is:
PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%")
PROMPT(TEXT,%SELECTED_DAY%,"Write the date (format YYYYMMDD)",)
I also have a dynamic constant that assign the name %CATEGORY_DIM% to "C_CATEGORY" value.
Can anyone help me?
thanks a lot
Edited by: Luca Novali on Feb 13, 2012 3:49 PM

How to copy/download all ABAP programs in a text with a single report ?

How to copy/download all ABAP programs in a text format with a single report/TC ?
How to copy/download ABAP source code with all include programs ?....
we need to search & copy all include programs everytime....

Hi,
check this link
downloading programs
Regards

Schedule Jobs with multiple steps via ABAP Program

Hi,
I need to schedule multiple programs via background jobs on a daily basis. Since all these jobs are to be run as a single job, the various programs have to be run as steps in a major job.
I am however not very clear on how this can be done via an ABAP program ( the idea of a program is that various parameters to be passed to each program in the step can be entered dynamically rather than via variants).
I am using the JOB_OPEN and JOB_CLOSE functions and submitting the programs with selection screen parameters dynamically passed to create a job. I need to do this for various programs as a job step (WITHOUT Variants being defined).
Can anyone suggest any ideas for this? I have tried out JOB_SUBMIT Function but am not very confident I know what exactly it is for as it asks for a variant.
Thanks very much,
Preet

Hi Preet,
just to be sure: you know, that variants can be dynamical, too?
It's quite usual to assign dynamical current date, but it's also possible to add / subtract value and even define own functionality.
Maybe it's easier to implement a dynamical selection and handle static jobs.
If you try to plan a job (online or with JOB_SUBMIT), you have to use variants - you can create (or change) them dynamical in beforehand. Only SE38, F8, F9 is creating a temporary variant, so that no saved variant is necessary.
But if you end up creating variants dynamical, you can change one existing variant, too. Then you can use a static job definition (with periodical starting rule).
So: have a look, if dynamic variants are enough, otherwise change variants per job.
Regards,
Christian

Need to start a program in Oracle System (External) from sap program

Hi guys,
     I need to start a program in another oracle based system from sap program by writing native sql statements.
Does anyone have idea how to do this.
Rgds,
Ram

Hi,
Here is another sample for procedures.Kindly reward points by clicking the star on the left of reply,if it is useful.
Code Sample for writing a procedure with input and output parameters
REPORT zzz_jaytest.
* Getting the regno and total as input parameters
PARAMETERS : p_regno(10) TYPE c DEFAULT 'R1000',
                           p_total     TYPE i.
data : v_total type i.
* In this procedure, we are updating the total of a regno given as input.
* Here two parameters used in the procedure are input parameters.
* We are updating the record of regno entered in selection screen and
* adding the total entered to the already existing total. We have to give semicolon
* for the statement inside procedure.
exec sql.
CREATE or replace PROCEDURE PROC1 ( p_regno in char, p_total in number )
IS
    BEGIN
      UPDATE stu_det SET total = total + p_total where regno = p_regno;
    END;
endexec.
* This is the code to execute the procedure for update.
* While executing the procedure, the parameter variable should be
* preceded with colon :
EXEC SQL.
EXECUTE PROCEDURE PROC1 ( in :p_regno, in :p_total )
ENDEXEC.
* In this procedure, we are selecting the details for the regno entered
* as input. Here p_regno is input parameter and v_total is used as output
* parameter. So that we can use the retrieved value of v_total in our
* ABAP program
exec sql.
CREATE or replace PROCEDURE PROC2 (p_regno in char, v_total out char)
IS
    BEGIN
      select total into v_total from stu_det
                         where regno = p_regno;
    END;
endexec.
* This is the code to execute second procedure.
EXEC SQL.
EXECUTE PROCEDURE PROC2 ( in :p_regno, out :v_total )
ENDEXEC.
write : / 'Total of ', p_regno, ' is ', v_total.

How to create Inbound Idocs in a ABAP program? Any function Module?

Hello Experts,
My requirement is : I have sales order data which I extracted from third party system in my internal tables. In the same box I need to create inbound Idocs and then consequently create sales orders.
I have used the function module IDOC_INBOUND_WRITE_TO_DB to create inbound Idocs from Sales Orders data in internal tables. I have populated all the data records with correct PSGNUM and HLEVEL values. My plan is to create inbound idocs with this function module and send those to IDOC_INPUT_ORDERS function module which creates Sales Orders.
If a sales order in the internal table in ABAP program contains only one item, then I am getting correct idocs. But if more than one item exists for a sales order then the line item segments which got repeated in Idoc are having PSGNUM and HLEVEL values as zero when I checked in WE02. As a result the hierarchy from the second item segment is getting disturbed and getting the status 60.
I populated T_EDIDD with data records from IDOC_INBOUND_WRITE_TO_DB.
To the function module IDOC_INPUT_ORDERS, T_EDIDC and T_EDIDD are the input. I observed that in T_EDIDD also the PSGNUM and HLEVEL values are blank.
I am getting Status 60 with message 'EDI: Syntax error in IDoc (segment cannot be identified)' for idocs which have more than one item.
I need to extract sales data from third party and create inbound idocs and create sales orders in one ABAP program only. I need to display corresponding Idoc numbers for the corresponding third party sales order number in a listoutput.
Can anybody please provide inputs?
Regards.

Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
           perform data_records_wipe
                                  tables
                                      t_data_records.
FORM DATA_RECORDS_WIPE
                  TABLES
                      T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
    CLEAR: T_DATA_RECORDS_IN-MANDT,
           T_DATA_RECORDS_IN-DOCNUM,
           T_DATA_RECORDS_IN-SEGNUM,
           T_DATA_RECORDS_IN-PSGNUM,
           T_DATA_RECORDS_IN-HLEVEL.
    modify t_data_records_in.
ENDLOOP.
ENDFORM.                               " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards

How to find the Web AS Port from ABAP program

Hi
I have an ABAP program which passes an URL for a BSP page to the Alert Framework. While creating the URL I need to find out the Hostname and port number for the Web service for that server. Hostname comes from sy-host but I am not able to find the port number.
Please help...
Thanks in advance

Hi,
consider this little code snippet:
data: l_urls       type tihttpurls2.
call method cl_http_server=>get_extension_info
   EXPORTING
    extension_class = 'cl_http_ext_bsp'
   IMPORTING
        urls            = l_urls.
l_urls contains a table of configured ports. maybe that helps.
regards, Ulli

How to create schedule job and event trigger in XI to start a ABAP program?

Dear All:
Here are what i need to do:
1.To run a ABAP program to start an XI scenario per hour.
2.To run a ABAP program to start an XI scenario per day at 6 PM.
3.To run a ABAP program used event trigger to make sure that XI scenario has finished the process and after that wait for 10 min later and run again.
only i know is used sm36 & sm37 to set up a schedule job.
but what i don't know is how to do it step by step.
especially point 3.
are there any step by step example can show me how?
it better be simple and details...
thanks you all
Regards
Jack Lee

Hi,
If you want to trigger the event manually from within SAP, use transaction
SM64
in SAP this is done by scheduling a job
once a new customer is entered
your scheduled report sends customer master data
you can schedule your report (TCODE - BD12 I think) to one day or every 5 minutes... it depend on your needs and the system performence
Regards,
Surya

Need of an ABAP Program

Similar Messages

Maybe you are looking for