NEED SOME SUGGESTIONS FOR CUSTOM KERNELS
I had a sony ericsson live with walkman earlier and I've flashed custom kernel and rom for it.. and it is working superbly so far.. Currently I've got an Xperia ray and I wish to do the same ... Before I get started let me know the best custom kernels out there for this device???
Solved!
Go to Solution.
I guess you should search for XDA
As far as i know kernels from team free xperia(Free xperia Project) are the best
DooMkernel etc etc
http://forum.xda-developers.com/showthread.php?t=1520654
Check his signature
http://forum.xda-developers.com/member.php?u=2784807
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.
Similar Messages
-
Need some suggestion for Demantra Shape modeling
Hi All
Can any one sugesst me how to create a Demantra Shape modeling using 7.2 version. I am working on a POC which includes shape modeling.
Thanks
RamKim,
Tttt yyyy pppp iii nnn gggg slowly.
You described your situation quite clearly.
As you probably know the digital inputs on the USB-6008/9 are software timed, so you have some uncertainty in the time of any sample. Depending on your OS that uncertainty will typically be on the order of a few milliseconds but occasionally may be much longer.
To count the pulses in software requires a combination of several things.
1. You need to have a data acquisition method which is fast enough to capture each high and low state of the pulses produced by the pump. For software timed Digital Input a good way to do this is to have an independent, parallel loop which reads the input line rapidly and passes the data or transitions to another loop via a queue. This is known as the Producer loop in a Producer/Consumer architecture. Examples come with labVIEW. A 10 ms Wait in the loop is probably appropriate.
2. You need to convert the digital inputs (levels) into pulses or transitions to be counted. Suppose you want to increase the count by one every time the logical level changes from False to True. To do this you need to know the previous level and the current level. A shift register is one of the best ways to do this in LV. Add a shift register to the loop. Initialize it to False. Connect the result of the Digital Read to the right terminal of the shift regsiter inside the loop. When that Read is True and the previous value (obtained from the left terminal of the shift register) is False, increment the count value (which is also kept in a shift register) in the case structure.
3. You did not indicate what you are doing with the counts or what the pulses represent. Do you need to measure the frequency (or the period which is the reciprocal of the frequency)? Do you need to accumulate the number of pulses? Over what time period?
Lynn -
Need some suggestions for a design layout like this site
This is just an example, but what im working on is personal
family site that
will be more of a family history site..
Is there anyway to build a layout dynamically so it looks
like this?
http://en.wikipedia.org/wiki/Image:Family_tree.svg
Basically, instead of creating images to layout the look like
this site.. i
would like to setup the page so when we add new family member
to the
database, it displays under the right person visually...
Didnt really explain it well.. but i would like a design like
at the link
above, but to be built dynamically based on my database...
can this be
accomplished?I thought my sig was turned on.. guess not...
below is what im using
ASP, SQL2005, DW8 VBScript
"SnakEyez02" <[email protected]> wrote in
message
news:fbc048$s7p$[email protected]..
> If you are talking about using a database, what
scripting
> language/database are you going to be using? -
Hello friends recently shifted from windows to mac need some suggestion on which software to go ahead with for creating word editing, excel,power point presentation.
Only Microsoft's Office for Mac 2011 14.4.8 will work on your Windows Office files in their native document format. Anything else, and particularly Apple's Pages, Numbers, and Keynote will perform translation on open, and export. This can, and will, introduce differences to your original documents, especially when sharing with others in the Windows Office 2010/2013 applications.
Here is my short list.
Office for Mac 2011 v14.4.8
LibreOffice (latest)
The current iterations of Apple's Pages, Numbers, and Keynote are not what I would term business/professional grade applications. Apple updates them infrequently, ignores user friendly features, omits others, and has introduced default backwards incompatibility between Yosemite and prior OS X releases of these applications. Read the reviews in the OS X App Store. Even for free with a recent Mac purchase, these products will transform your mood.
The free LibreOffice is aggressively developed and designed as an MS Office replacement suite. There are occasions where it can open documents that Office for Mac, and Apple's products ignore. Extensive PDF manuals for the individual applications. Unlike Word, you can have two-up page viewing with a button click, or edit multi-page PDF. There is a forms designer. It can open nearly any document including MS Publisher and Visio documents from the Windows space. I use it.
MS Office 2015 Preview for Yosemite is available, but as its title would suggest, it is not done yet, and some features are missing. I created a single-page Word document with a DRAFT watermark. Only LibreOffice v4.4.1 was able to open this document and preserve the watermark. -
Hi need good suggestion for future
hi experts,
i need good suggestion for my future _
i have 3 + exp as a ABAP consultant,
i am looking for a change, i wish to add some thing to ABAP? but, i couldn't understand what to do? pls help me in this regard..
my skills are : very good in ABAP
vey weak in OOPS.
waiting for good advice
thanks in advancethe future will depends on the OOPS only . for all the companies started working on OOPS only they are upgrading to the oops from the general abap...be aware of that ..
it is better to learn XI or HRABAP it is good for you i think. -
Hello,
I am not able to pass multiple values for single import parameter..i tired calling function module in loop and also tried RANGES..Need some suggestion on this..
Thanks and Regards,
sapdev86
Moderator Message: Basic Question
Edited by: kishan P on Oct 14, 2010 11:46 AMHi,
BAPI is nothing but a function module and also RFC enabled. So u can call that fm from outside SAP. U can call that BAPI using some logic or u can make hardcoding the parameters, its depends mainly on ur requirement.
Regards
Amitava -
I need some help for an explanation. Loop for 1 minute.
int minute=1;
long currentTime=System.currentTimeMillis();
long stoppingTime = currentTime + (minute * 60 * 1000);
while (currentTime<stoppingTime) {
// do x;
currentTime=System.currentTimeMillis();
}I want to have the loop to run for 1 minute. It does not seem to work.
What did I miss? I need some help for an explanation.Ran:
class PrintTimeAsProcess {
public static void main(String[] argv) throws Exception {
int minute=1;
long currentTime=System.currentTimeMillis();
long stoppingTime = currentTime + (minute * 15 * 1000);
System.out.println("START Time: "+currentTime);
while (currentTime<stoppingTime) {
currentTime=System.currentTimeMillis();
System.out.println("END Time: "+currentTime);
}Got:
START Time: 1149278202718
END Time: 1149278217718
1149278217718
-1149278202718
15000 -
I need some parts for my MuVo V100, can anyone help?
I need some parts for my MuVo V00, can anyone help I couldn't find any thread this would belong in, but if I've made a mistake, I'm sorry.
I have a Creative Labs MuVo V00 2 gig player. I love it. The only problem is that the back peice of plastic that holds the battery in somehow has fallen off and has disappeared. I really, really, would like to replace it, but I can't find anywhere where parts like this are sold.
So, does anyone know where I can buy this part Or does anyone have one they are willing to sell me If I have to get the whole little "docking bay" that holds the batery and the unit, that would be fine too. I'm not going to pay huge money for it, seeing that I can still get a new one at a few places, but if anyone has one that broke, or that they just aren't using, and wouldn't mind making a few bucks + postage, I would really appreciate it.
Thanks for your time.Re: I need some parts for my MuVo V00, can anyone help As far as I'm concerned the subject is closed. I was just irritated that I asked for help, and got some glib little reply, telling me something that anyone who's been on the internet for more than ten seconds should know about. Because to be honest, him replying with those three words, might have made someone overlook the post, thinking, "Someone is handling that, let's move on." Someone who actually might have what I needed.
But, as it turns out, I could order a reconditioned MuVo from Creative directly for about 6 bucks. (vs. 45+ if I'd gone through ebay) so the problem is resolved. If I could figure out a way to erase this entire post, I would do it. If you can do so, being a mod, I would appreciate it.
Sorry if I upset you Loi-CL, I understand you're a moderator, but I don't take kindly to being treated like I'm stupid and that's exactly what coachop94 was doing. If he didn't have anything important or useful to tell me, he could have just skipped over my post. -
I use to have a JBL dock for my iPod Touch 4 but it no longer works with it. I seem to be having some problems finding a dock that would work with a iPod Touch 4. All I want is a good dock with stereo sound and that is chargable and would also have an adaptor so I won't have to use batteries but one with batteries will do if that's all I can find. I don't need one that has a radio and a clock with it. One that probably doesn't go over 100.00. Would like some suggestions from anyone please? Thanks.
Thanks for the replies. I have finally found a definitive answer on the Microsoft website (after a few days of virtual digging).
http://download.microsoft.com/download/6/B/A/6BA3215A-C8B5-4AD1-AA8E-6C93606A4CFB/Windows_Server_2012_R2_Remote_Desktop_Services_Licensing_Datasheet.pdf
And I quote for the benefit of everyone else looking for the same answers:
"While RDS is shipped with Windows Server software, it is licensed separately through a Client Access License (CAL) model. This means that each accessing end point (i.e., a User or a Device) must be covered by an RDS license to access Microsoft VDI infrastructure.
And this CAL is an additive CAL, which means that in addition to a Windows Server CAL, customers must acquire a Windows Server RDS CAL for each user or device that:
- Directly or indirectly accesses any of the RDS product functionality, and/or
- Directly or indirectly interacts with the graphical user interface of the server software using RDS functionality or other third-party technology
For example, to access RDS functionality in Windows Server 2012 R2, Windows Server 2012 CALs and Windows Server 2012 RDS CALs are required along with the server software licenses." -
Need some suggestion​s for creating a software based digital I/O counter
Hi All
I've been using LabVIEW to sucessfully create a number of fluid level monitoring applications for oil well drilling. bear in mind that I'm a geologist not a software engineer so you may have to talk/type slowly .
I've been using the USB 6009 & 6008 for these aplications so far, they are however limited by only having 1 counter per DAQ. What i'd like to do (if possible) is use the some of the digital I/O channels as counters. The events i'm attempting to count are simple open/closed pulse signals from a micro switch. The micro switch is attached to a slow running mud pump which is sending up to 3 pulses per second but is usually running at 10-80 pulses per min. The slow cycle rate of these big pumps means I can't use a frequency aplication as they don't seem to work below 1hz.
I've tried to use a case structure to create a counter but I'm afraid I can't seem to get the logic right to turn the output into a counted output. Anyone got a suggestion for things I could try?
Thanks
KimKim,
Tttt yyyy pppp iii nnn gggg slowly.
You described your situation quite clearly.
As you probably know the digital inputs on the USB-6008/9 are software timed, so you have some uncertainty in the time of any sample. Depending on your OS that uncertainty will typically be on the order of a few milliseconds but occasionally may be much longer.
To count the pulses in software requires a combination of several things.
1. You need to have a data acquisition method which is fast enough to capture each high and low state of the pulses produced by the pump. For software timed Digital Input a good way to do this is to have an independent, parallel loop which reads the input line rapidly and passes the data or transitions to another loop via a queue. This is known as the Producer loop in a Producer/Consumer architecture. Examples come with labVIEW. A 10 ms Wait in the loop is probably appropriate.
2. You need to convert the digital inputs (levels) into pulses or transitions to be counted. Suppose you want to increase the count by one every time the logical level changes from False to True. To do this you need to know the previous level and the current level. A shift register is one of the best ways to do this in LV. Add a shift register to the loop. Initialize it to False. Connect the result of the Digital Read to the right terminal of the shift regsiter inside the loop. When that Read is True and the previous value (obtained from the left terminal of the shift register) is False, increment the count value (which is also kept in a shift register) in the case structure.
3. You did not indicate what you are doing with the counts or what the pulses represent. Do you need to measure the frequency (or the period which is the reciprocal of the frequency)? Do you need to accumulate the number of pulses? Over what time period?
Lynn -
[solved] building the kernel headers for custom kernels
well, ive been building several different kernels for my laptop, so that i can test stuff. but ive got a problem with the kernel headers.
ive mirrored the arch kernel's PKGBUILD and modified some naming to get a custom kernel. but when i try to build a custmo module, it complains the headers are broken. (example, vbox_build_module).
im pasting the pkgbuild here for future reference...if someone sees something thats plain wrong, please say so.
thanks
# $Id: PKGBUILD 60382 2009-12-04 15:31:11Z tpowa $
# Maintainer: Tobias Powalowski <[email protected]>
# Maintainer: Thomas Baechler <[email protected]>
pkgbase="kernel26"
#pkgname=('kernel26' 'kernel26-firmware' 'kernel26-headers') # Build stock -ARCH kernel
pkgname=('kernel26-git' 'kernel26-git-headers') # Build kernel with a different name
_kernelname=${pkgname#kernel26}
pkgver=2.6.34
pkgrel=1
_patchname=""
_branch="linux-2.6"
_gittag="v2.6.34-rc3"
#_gittag="origin"
arch=(i686 x86_64)
license=('GPL2')
groups=('base')
url="http://www.kernel.org"
source=(config
# standard config files for mkinitcpio ramdisk
kernel26.preset
${_patchname})
build() {
cd ${srcdir}/$_branch
msg "Fetching branch ${_branch}"
## FOR BISECT, Comment these lines
git reset --hard
git clean -d -f
git fetch
msg "Cheking out tag ${_gittag}"
git checkout $_gittag
### a patch
if [ "${_patchname}" != "" ]; then
patch -Np1 -i ${srcdir}/$_patchname || return 1
fi
# if [ "$CARCH" = "x86_64" ]; then
cat ../config.x86_64 >./.config
# else
cat ../config >./.config
# fi
if [ "${_kernelname}" != "" ]; then
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
fi
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
make menuconfig # CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# stop here
# this is useful to configure the kernel
#msg "Stopping build"
#return 1
yes "" | make config
# build!
make bzImage modules || return 1
package_kernel26-git() {
pkgdesc="The Linux Kernel and modules"
backup=(etc/mkinitcpio.d/${pkgname}.preset)
depends=('coreutils' 'kernel26-firmware>=2.6.32' 'module-init-tools' 'mkinitcpio>=0.5.20')
# pwc, ieee80211 and hostap-driver26 modules are included in kernel26 now
# nforce package support was abandoned by nvidia, kernel modules should cover everything now.
# kernel24 support is dropped since glibc24
replaces=('kernel24' 'kernel24-scsi' 'kernel26-scsi'
'alsa-driver' 'ieee80211' 'hostap-driver26'
'pwc' 'nforce' 'squashfs' 'unionfs' 'ivtv'
'zd1211' 'kvm-modules' 'iwlwifi' 'rt2x00-cvs'
'gspcav1' 'atl2' 'wlan-ng26' 'rt2500')
install=kernel26.install
optdepends=('crda: to set the correct wireless channels of your country')
KARCH=x86
cd ${srcdir}/$_branch
_kernver="$(make kernelrelease)"
mkdir -p ${pkgdir}/{lib/modules,boot}
make INSTALL_MOD_PATH=${pkgdir} modules_install || return 1
cp System.map ${pkgdir}/boot/System.map26${_kernelname}
cp arch/$KARCH/boot/bzImage ${pkgdir}/boot/vmlinuz26${_kernelname}
# # add vmlinux
install -m644 -D vmlinux ${pkgdir}/usr/src/linux-${_kernver}/vmlinux
# install fallback mkinitcpio.conf file and preset file for kernel
install -m644 -D ${srcdir}/kernel26.preset ${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset || return 1
# set correct depmod command for install
sed \
-e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/g" \
-e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
-i $startdir/kernel26.install
sed \
-e "s|source .*|source /etc/mkinitcpio.d/kernel26${_kernelname}.kver|g" \
-e "s|default_image=.*|default_image=\"/boot/${pkgname}.img\"|g" \
-e "s|fallback_image=.*|fallback_image=\"/boot/${pkgname}-fallback.img\"|g" \
-i ${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset
echo -e "# DO NOT EDIT THIS FILE\nALL_kver='${_kernver}'" > ${pkgdir}/etc/mkinitcpio.d/${pkgname}.kver
# remove build and source links
rm -f ${pkgdir}/lib/modules/${_kernver}/{source,build}
# remove the firmware
rm -rf ${pkgdir}/lib/firmware
package_kernel26-git-headers() {
pkgdesc="Header files and scripts for building modules for kernel26"
mkdir -p ${pkgdir}/lib/modules/${_kernver}
cd ${pkgdir}/lib/modules/${_kernver}
ln -sf ../../../usr/src/linux-${_kernver} build
cd ${srcdir}/$_branch
install -D -m644 Makefile \
${pkgdir}/usr/src/linux-${_kernver}/Makefile
install -D -m644 kernel/Makefile \
${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile
install -D -m644 .config \
${pkgdir}/usr/src/linux-${_kernver}/.config
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include
for i in acpi asm-{generic,x86} config linux math-emu media net pcmcia scsi sound trace video; do
cp -a include/$i ${pkgdir}/usr/src/linux-${_kernver}/include/
done
# copy arch includes for external modules
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/arch/x86
cp -a arch/x86/include ${pkgdir}/usr/src/linux-${_kernver}/arch/x86/
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers ${pkgdir}/usr/src/linux-${_kernver}
cp -a scripts ${pkgdir}/usr/src/linux-${_kernver}
# fix permissions on scripts dir
chmod og-w -R ${pkgdir}/usr/src/linux-${_kernver}/scripts
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/kernel
cp arch/$KARCH/Makefile ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/
if [ "$CARCH" = "i686" ]; then
cp arch/$KARCH/Makefile_32.cpu ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/
fi
cp arch/$KARCH/kernel/asm-offsets.s ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/kernel/
# add headers for lirc package
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video
cp drivers/media/video/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/
for i in bt8xx cpia2 cx25840 cx88 em28xx et61x251 pwc saa7134 sn9c102 usbvideo zc0301; do
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/$i
cp -a drivers/media/video/$i/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/$i
done
# add docbook makefile
install -D -m644 Documentation/DocBook/Makefile \
${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile
# add dm headers
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/md
cp drivers/md/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/md
# add inotify.h
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include/linux
cp include/linux/inotify.h ${pkgdir}/usr/src/linux-${_kernver}/include/linux/
# add wireless headers
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/
cp net/mac80211/*.h ${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/9912
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core
cp drivers/media/dvb/dvb-core/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core/
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/11194
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/
cp include/config/dvb/*.h ${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/
# add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
# in reference to:
# http://bugs.archlinux.org/task/13146
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
cp drivers/media/dvb/frontends/lgdt330x.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
cp drivers/media/video/msp3400-driver.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
# add xfs and shmem for aufs building
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/fs/xfs
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/mm
cp fs/xfs/xfs_sb.h ${pkgdir}/usr/src/linux-${_kernver}/fs/xfs/xfs_sb.h
# add headers vor virtualbox
# in reference to:
# http://bugs.archlinux.org/task/14568
cp -a include/drm $pkgdir/usr/src/linux-${_kernver}/include/
# add headers for broadcom wl
# in reference to:
# http://bugs.archlinux.org/task/14568
cp -a include/trace $pkgdir/usr/src/linux-${_kernver}/include/
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/`echo $i | sed 's|/Kconfig.*||'`
cp $i ${pkgdir}/usr/src/linux-${_kernver}/$i
done
cd ${pkgdir}/usr/src/linux-${_kernver}/include && ln -s asm-$KARCH asm
# add header for aufs2-util
cp -a ${srcdir}/$_branch/include/asm-generic/bitsperlong.h ${pkgdir}/usr/src/linux-${_kernver}/include/asm/
chown -R root.root ${pkgdir}/usr/src/linux-${_kernver}
find ${pkgdir}/usr/src/linux-${_kernver} -type d -exec chmod 755 {} \;
# remove unneeded architectures
rm -rf ${pkgdir}/usr/src/linux-${_kernver}/arch/{alpha,arm,arm26,avr32,blackfin,cris,frv,h8300,ia64,m32r,m68k,m68knommu,mips,microblaze,mn10300,parisc,powerpc,ppc,s390,sh,sh64,sparc,sparc64,um,v850,xtensa}
package_kernel26-firmware() {
pkgdesc="The included firmware files of the Linux Kernel"
groups=('base')
cd ${srcdir}/$_branch
make firmware || return 1
make INSTALL_MOD_PATH=${pkgdir} firmware_install || return 1
Last edited by eldragon (2010-04-04 14:58:16)ngoonee wrote:
Check out this line
for i in acpi asm-{generic,x86} config linux math-emu media net pcmcia scsi sound trace video; do
for anything that might be missing. The error message when compiling would give you more of a clue. Off-hand, you may need to add 'generated', as I recall I needed that when the kernel moved to 2.6.33.
Problem with vbox_build_module after Kernel update.
Would you care to elaborate for us less versed in "Linux Geek" skills?
Thanks.......
[root@Arch2009p2 jeff]# vbox_build_module
Building vboxdrv for Linux 2.6.33-ARCH
make[1]: Entering directory `/opt/VirtualBox/src/vboxdrv'
for f in . linux r0drv r0drv/generic r0drv/linux VBox common/err common/string common/log generic math/gcc; \
do rm -f $f/*.o $f/.*.cmd $f/.*.flags; done
rm -rf .vboxdrv* .tmp_ver* vboxdrv.* Module.symvers Modules.symvers modules.order
make[1]: Leaving directory `/opt/VirtualBox/src/vboxdrv'
make[1]: Entering directory `/opt/VirtualBox/src/vboxnetflt'
for f in . linux r0drv r0drv/linux VBox common/err common/string common/log generic math/gcc; \
do rm -f $f/*.o $f/.*.cmd $f/.*.flags; done
rm -rf .vboxnetflt* .tmp_ver* vboxnetflt.* Modules.symvers modules.order
make[1]: Leaving directory `/opt/VirtualBox/src/vboxnetflt'
make[1]: Entering directory `/opt/VirtualBox/src/vboxnetadp'
for f in . linux r0drv r0drv/linux VBox common/err common/string common/log generic math/gcc; \
do rm -f $f/*.o $f/.*.cmd $f/.*.flags; done
rm -rf .vboxnetadp* .tmp_ver* vboxnetadp.* Modules.symvers modules.order
make[1]: Leaving directory `/opt/VirtualBox/src/vboxnetadp'
rm -f vboxdrv.ko vboxnetflt.ko vboxnetadp.ko
*** Building 'vboxdrv' module ***
make[1]: Entering directory `/opt/VirtualBox/src/vboxdrv'
make KBUILD_VERBOSE= -C /lib/modules/2.6.33-ARCH/build SUBDIRS=/opt/VirtualBox/src/vboxdrv SRCROOT=/opt/VirtualBox/src/vboxdrv modules
make[2]: Entering directory `/usr/src/linux-2.6.33-ARCH'
CC [M] /opt/VirtualBox/src/vboxdrv/linux/SUPDrv-linux.o
In file included from /opt/VirtualBox/src/vboxdrv/include/VBox/types.h:34,
from /opt/VirtualBox/src/vboxdrv/linux/../SUPDrvInternal.h:39,
from /opt/VirtualBox/src/vboxdrv/linux/SUPDrv-linux.c:37:
/opt/VirtualBox/src/vboxdrv/include/iprt/types.h:100:30: error: linux/autoconf.h: No such file or directory
make[3]: *** [/opt/VirtualBox/src/vboxdrv/linux/SUPDrv-linux.o] Error 1
make[2]: *** [_module_/opt/VirtualBox/src/vboxdrv] Error 2
make[2]: Leaving directory `/usr/src/linux-2.6.33-ARCH'
make[1]: *** [vboxdrv] Error 2
make[1]: Leaving directory `/opt/VirtualBox/src/vboxdrv'
make: *** [all] Error 2 -
Need a Suggestion For implementing the Digital Signature For the Documents
Hi,
Currently I am working in a Document Management System. I need a Good Suggestion for how to implement a Digital Signature For the Documents.
Thanks in Advance
Sabarish VHmm, if you are not using Oracle Payroll, what are you using for payroll? I am wondering why you could not use your payroll system, whatever it is, to handle this reimbursement program.
Well, you may want to talk to Oracle support about how to handle this in Oracle iExpense. You can certainly handle advances for Expense Reports. You would then apply the advance to the expense report items. The catch is I don't think you can stop expense item entry after the adavance is satisfied. You would have to set up a work flow process of some kind to have the expense reports reviewed and only approve expenses that are applied to the advance, is what I am thinking. Not your ideal solution, but something to think about. It could be the Oracle folks might know of a sneaky way to handle this. What you are trying to do is unusual. Employee advances are common, but the idea of not being able to exceed the advance amount is what unusual about this. Normally you will accept any expenses over the advance amount and reimburse the employee for those extra amounts not advanced.
Good luck.
John Dickey -
PKGBUILD for custom kernel issue
Hi all,
Last night I was putting together a PKGBUILD for a kernel I'd like to compile that has the ck patchset, grsecurity (latest testing), and had broadcom-wl on it already so I don't have to keep reinstalling it from AUR and doing depmod each time as it keeps making me have to find an ethernet cable. I used the kerne26 Arch PKGBUILD as a base and included parts of kernel-netbook for broadcom-wl, kernel26-grsecurity, and kernel26-ck and altered name variables and links etc so it all works and all sources are downloaded. I also got the two .patch files (semaphore and something else) from the kernel-netbook tarball to build the thing with, I don't know if it would work without them.
However when I get into the build() a few patches are applied before I get messages about patches already applied or reversed, and then it says build failed because of an error, I can't tell which package is causing thins or why (it all goes by too fast, and the error says failed without reason, and the reversed patch messages are what is immediately previous to it). I have not yet gone all the way through the pkgbuild - especially towards the end, and I felt that the standard setup of init file system creation and such were ok, and if anything does need altering about it, I can deal with it once I get these first troubles solved.
Below is my pkgbuild so far. Hopefully there are people out there who can aid me with this.
Thanks,
Ben.
# Maintainer: Ben Ward <[email protected]>
pkgbase="kernel26"
# pkgname=('kernel26' 'kernel26-headers' 'kernel26-docs') # Build stock -ARCH kernel
pkgname=kernel26-custom # Build kernel with a different name
#Base kernel info
_kernelname=${pkgname#kernel26}
_basekernel=2.6.38
pkgver=${_basekernel}.3
pkgrel=1
#ARCH patch info
_archpatchver=1
_archpatchname="patch-${pkgver}-${_archpatchver}-ARCH"
#_archpatchname="patch-${pkgver}-1-ARCH"
#grsecurity info
_grsec=2.2.2
_timestamp=201104182227
#Broadcom-wl info
_broadcom_ver=5.100.82.38
_broadcom="hybrid-portsrc_x86_32-v${_broadcom_ver//./_}"
#ck-patch info
_ckpatchversion=3
_ckpatchname="patch-${_basekernel}-ck${_ckpatchversion}"
arch=(i686 x86_64)
license=('GPL2')
url="http://www.kernel.org"
options=(!strip)
source=(ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-$_basekernel.tar.bz2
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/patch-${pkgver}.bz2
ftp://ftp.archlinux.org/other/kernel26/${_archpatchname}.bz2
http://grsecurity.net/test/grsecurity-${_grsec}-${pkgver}-${_timestamp}.patch
http://www.broadcom.com/docs/linux_sta/${_broadcom}.tar.gz
http://www.kernel.org/pub/linux/kernel/people/ck/patches/2.6/${_basekernel}/${_basekernel}-ck${_ckpatchversion}/${_ckpatchname}.bz2
"semaphore.patch"
"mutex-sema.patch"
# the main kernel config files
config config.x86_64
# standard config files for mkinitcpio ramdisk
kernel26.preset)
md5sums=('7d471477bfa67546f902da62227fa976'
'b3677121c4b5efcb8128c2000788d0aa'
'5b14b6eb2cdcb074905d4974437c4df6'
'a19024797f192fe21a468de80c101d8a'
'c0074a1622c75916442e26763ddf47d0'
'88d5b3e0622f8c48dad19ab9ac3c16f0'
'aee89fe7f034aea2f2ca95322774c1b5'
'21ce3f7967d7305064bf7eb60030ffea'
'f66543886835ab8599b29cd0c48aa66d'
'd866bcc06672fee17736bd5022f700fe'
'25584700a0a679542929c4bed31433b6')
build() {
cd ${srcdir}/linux-$_basekernel
# Apply kernel.org patch to basekernel
msg "Checking basekernel is ip to date..."
if [[ "${_basekernel}" != "${pkgver}" ]]; then
msg "Patching source with upstream patch..."
patch -Np1 -i "${srcdir}/patch-${pkgver}" || return 1
fi
# Add -ARCH patches
# See http://projects.archlinux.org/linux-2.6-ARCH.git/
msg "Patching Kernel with ARCH patches..."
patch -Np1 -i ${srcdir}/${_archpatchname}
# Add ck patch
msg "Patching Kernel with ck patches..."
patch -Np1 -i ${srcdir}/${_ckpatchname}
# Add grsecurity patch
msg "Patching kernel with grsecurity testing branch..."
if [ "$CARCH" = "x86_64" ]; then
cat ../config.x86_64 >./.config
else
cat ../config >./.config
fi
if [ "${_kernelname}" != "" ]; then
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
fi
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
#make menuconfig # CLI menu for configuration
make nconfig # new CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# stop here
# this is useful to configure the kernel
#msg "Stopping build"
#return 1
yes "" | make config
# build!
make ${MAKEFLAGS} bzImage modules
package_kernel26() {
pkgdesc="The Linux Kernel and modules"
groups=('base')
backup=(etc/mkinitcpio.d/${pkgname}.preset)
depends=('coreutils' 'linux-firmware' 'module-init-tools>=3.12-2' 'mkinitcpio>=0.6.8-2')
# pwc, ieee80211 and hostap-driver26 modules are included in kernel26 now
# nforce package support was abandoned by nvidia, kernel modules should cover everything now.
# kernel24 support is dropped since glibc24
replaces=('kernel24' 'kernel24-scsi' 'kernel26-scsi'
'alsa-driver' 'ieee80211' 'hostap-driver26'
'pwc' 'nforce' 'squashfs' 'unionfs' 'ivtv'
'zd1211' 'kvm-modules' 'iwlwifi' 'rt2x00-cvs'
'gspcav1' 'atl2' 'wlan-ng26' 'rt2500' 'nouveau-drm')
install=kernel26.install
optdepends=('crda: to set the correct wireless channels of your country')
KARCH=x86
cd ${srcdir}/linux-$_basekernel
# get kernel version
_kernver="$(make kernelrelease)"
mkdir -p ${pkgdir}/{lib/modules,lib/firmware,boot}
make INSTALL_MOD_PATH=${pkgdir} modules_install
cp System.map ${pkgdir}/boot/System.map26${_kernelname}
cp arch/$KARCH/boot/bzImage ${pkgdir}/boot/vmlinuz26${_kernelname}
# # add vmlinux
install -m644 -D vmlinux ${pkgdir}/usr/src/linux-${_kernver}/vmlinux
# install fallback mkinitcpio.conf file and preset file for kernel
install -m644 -D ${srcdir}/kernel26.preset ${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset
# set correct depmod command for install
sed \
-e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/g" \
-e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
-i $startdir/kernel26.install
sed \
-e "s|source .*|source /etc/mkinitcpio.d/kernel26${_kernelname}.kver|g" \
-e "s|default_image=.*|default_image=\"/boot/${pkgname}.img\"|g" \
-e "s|fallback_image=.*|fallback_image=\"/boot/${pkgname}-fallback.img\"|g" \
-i ${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset
echo -e "# DO NOT EDIT THIS FILE\nALL_kver='${_kernver}'" > ${pkgdir}/etc/mkinitcpio.d/${pkgname}.kver
# remove build and source links
rm -f ${pkgdir}/lib/modules/${_kernver}/{source,build}
# remove the firmware
rm -rf ${pkgdir}/lib/firmware
# gzip -9 all modules to safe 100MB of space
find "$pkgdir" -name '*.ko' -exec gzip -9 {} \;
##Section: Broadcom-wl
msg "Compiling broadcom-wl module:"
cd ${srcdir}/
#patching broadcom as broadcom-wl package on AUR
patch -p1 < license.patch
patch -p1 < semaphore.patch
patch -p1 < mutex-sema.patch
make -C ${srcdir}/linux-$_basekernel M=`pwd`
install -D -m 755 wl.ko ${pkgdir}/lib/modules/$_kernver/kernel/drivers/net/wireless/wl.ko
package_kernel26-headers() {
pkgdesc="Header files and scripts for building modules for kernel26"
mkdir -p ${pkgdir}/lib/modules/${_kernver}
cd ${pkgdir}/lib/modules/${_kernver}
ln -sf ../../../usr/src/linux-${_kernver} build
cd ${srcdir}/linux-$_basekernel
install -D -m644 Makefile \
${pkgdir}/usr/src/linux-${_kernver}/Makefile
install -D -m644 kernel/Makefile \
${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile
install -D -m644 .config \
${pkgdir}/usr/src/linux-${_kernver}/.config
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include
for i in acpi asm-generic config generated linux math-emu media net pcmcia scsi sound trace video xen; do
cp -a include/$i ${pkgdir}/usr/src/linux-${_kernver}/include/
done
# copy arch includes for external modules
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/arch/x86
cp -a arch/x86/include ${pkgdir}/usr/src/linux-${_kernver}/arch/x86/
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers ${pkgdir}/usr/src/linux-${_kernver}
cp -a scripts ${pkgdir}/usr/src/linux-${_kernver}
# fix permissions on scripts dir
chmod og-w -R ${pkgdir}/usr/src/linux-${_kernver}/scripts
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/kernel
cp arch/$KARCH/Makefile ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/
if [ "$CARCH" = "i686" ]; then
cp arch/$KARCH/Makefile_32.cpu ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/
fi
cp arch/$KARCH/kernel/asm-offsets.s ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/kernel/
# add headers for lirc package
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video
cp drivers/media/video/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/
for i in bt8xx cpia2 cx25840 cx88 em28xx et61x251 pwc saa7134 sn9c102; do
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/$i
cp -a drivers/media/video/$i/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/$i
done
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/staging/usbvideo/
cp -a drivers/staging/usbvideo/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/staging/usbvideo/
# add docbook makefile
install -D -m644 Documentation/DocBook/Makefile \
${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile
# add dm headers
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/md
cp drivers/md/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/md
# add inotify.h
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include/linux
cp include/linux/inotify.h ${pkgdir}/usr/src/linux-${_kernver}/include/linux/
# add wireless headers
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/
cp net/mac80211/*.h ${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/9912
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core
cp drivers/media/dvb/dvb-core/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core/
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/11194
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/
cp include/config/dvb/*.h ${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/
# add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
# in reference to:
# http://bugs.archlinux.org/task/13146
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
cp drivers/media/dvb/frontends/lgdt330x.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
cp drivers/media/video/msp3400-driver.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
# add dvb headers
# in reference to:
# http://bugs.archlinux.org/task/20402
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-usb
cp drivers/media/dvb/dvb-usb/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-usb/
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends
cp drivers/media/dvb/frontends/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/common/tuners
cp drivers/media/common/tuners/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/common/tuners/
# add xfs and shmem for aufs building
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/fs/xfs
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/mm
cp fs/xfs/xfs_sb.h ${pkgdir}/usr/src/linux-${_kernver}/fs/xfs/xfs_sb.h
# add headers vor virtualbox
# in reference to:
# http://bugs.archlinux.org/task/14568
cp -a include/drm $pkgdir/usr/src/linux-${_kernver}/include/
# add headers for broadcom wl
# in reference to:
# http://bugs.archlinux.org/task/14568
cp -a include/trace $pkgdir/usr/src/linux-${_kernver}/include/
# add headers for crypto modules
# in reference to:
# http://bugs.archlinux.org/task/22081
cp -a include/crypto $pkgdir/usr/src/linux-${_kernver}/include/
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/`echo $i | sed 's|/Kconfig.*||'`
cp $i ${pkgdir}/usr/src/linux-${_kernver}/$i
done
chown -R root.root ${pkgdir}/usr/src/linux-${_kernver}
find ${pkgdir}/usr/src/linux-${_kernver} -type d -exec chmod 755 {} \;
# strip scripts directory
find ${pkgdir}/usr/src/linux-${_kernver}/scripts -type f -perm -u+w 2>/dev/null | while read binary ; do
case "$(file -bi "$binary")" in
*application/x-sharedlib*) # Libraries (.so)
/usr/bin/strip $STRIP_SHARED "$binary";;
*application/x-archive*) # Libraries (.a)
/usr/bin/strip $STRIP_STATIC "$binary";;
*application/x-executable*) # Binaries
/usr/bin/strip $STRIP_BINARIES "$binary";;
esac
done
# remove unneeded architectures
rm -rf ${pkgdir}/usr/src/linux-${_kernver}/arch/{alpha,arm,arm26,avr32,blackfin,cris,frv,h8300,ia64,m32r,m68k,m68knommu,mips,microblaze,mn10300,parisc,powerpc,ppc,s390,sh,sh64,sparc,sparc64,um,v850,xtensa}
package_kernel26-docs() {
pkgdesc="Kernel hackers manual - HTML documentation that comes with the Linux kernel."
cd ${srcdir}/linux-$_basekernel
mkdir -p $pkgdir/usr/src/linux-$_kernver
mv Documentation $pkgdir/usr/src/linux-$_kernver
find $pkgdir -type f -exec chmod 444 {} \;
find $pkgdir -type d -exec chmod 755 {} \;
# remove a file already in kernel26 package
rm -f $pkgdir/usr/src/linux-$_kernver/Documentation/DocBook/Makefile
I wonder if localyesconfig would take care of broadcom-wl for me...
Last edited by Ben9250 (2011-04-20 00:12:44)Thank you. I guess trying the abs method wouldn't hurt. My main issue was configuration. I've only just skimmed the PKGBUILD so I'm not aware of how it handles it. I suppose I could write my own as described in the wiki as well. Thanks again.
Edit: Further research has revealed to me that the kernel headers are merely there for when the full source tree isn't. Seeing as the full tree is present in my case, the headers are unnecessary. I may take graysky's advice though and use pacman to manage my kernel.
Last edited by smithr.michael1997 (2011-03-31 02:17:29) -
Need Mic suggestions for solo guitar video...
I have a Sony TRV-38 mini DV and need suggestions for an external mic. I want to video a solo guitar player sitting in a chair. Would I need to mic the guitar from a mic stand in front of him or would some sort of shotgun mic do the trick? Would buying a Beachtek unit be the best way to go, or is there a simpler/cheaper mic alternative that gives very good results. This is primarily just for good sounding archival footage.
Thanks for any help.
Mac OS X (10.4.3)there are a couple of approaches... you can close mic, but if you are experimenting with your equipment and techniques, it is quite possible that you could get a very colored tone and not accurately depict the performace from a sonic standpoint.
something that is quick, easy, and relatively high performance at a budget is to use an M-S stereo shotgun mic. the left channel will be mono hypercardoid aimed right at the performer... with the mic mid range, not close mic'd. the right channel will be the "-S" component of the stereo signal, which is optional and can be decoded with an M-S stereo process in the edit process, or if for example, there was too much ambient noise, simply discard the track and just use the left / mono signal. (personally, i would probably just mount my audio technica M-S stereo mic on my rycote hotshoe adapter, and mic camera mounted... no stands or cables to deal with)
yes, the beachtek or similiar direct interface is the way to go, bypassing the Sony's poor gain stages (disable auto gain control, if possible).
IF sound quality is of the utmost importance, then the real correct way to do this would be to record with 2 mics in an X-Y stero mid field setup. expense, complexity, and possibility of getting something wrong are probably too high to do for something as critical as a 1 take live event if you don't have experience under your belt. -
Need some suggestions in writing package..
Hi everyone,
I am just asking this question to know a better way than what i am doing.
I have a patient with 2 million rows in it.Is it possible to extract 2 million rows in a text file using UTL_FILE?.I need to extract each patient related data which comes from differnt tables (bigger than patient table) in a comma deleted file.For each patient id i have to query other tables and get the data related to that patient(according to the requirement).For that i need to call different functions against different tables.
Some think like this..
Create or replace procedure XXXX
cursor -----> to get the patient id's
variables ------> declare any other variables
begin
file handler for utl file to write into a file
open cursor
using bulk collect to fetch limited no of rows
For each patient id loop
data1 := function1
data2 := function2
data3 := function3
string : = data1|| data2 || data3|| ....
UTL_FILE.put_line
reset the string
end loop;
end;
My questions are:
Is it OK to call differnt functions for each patient id (2 million patients) are there? is there any better way to do this.
Please give me some suggestions if i need to change any steps that i am following to get better performance.
Thanks
PhaniHello,
It would be strongly advisable to minimise your function calls here.
What I would suggest is: writing one piece of SQL to be looped through with BULK COLLECT, so these:
data1 := function1
data2 := function2
data3 := function3Will be taken care of in the main SQL. Otherwise things will be very, very slow.
Therefore, something like this:
BEGIN
DECLARE CURSOR c_all_data IS
SELECT -- put all your data to be retrieved in this SELECT, that will easily be the quickest and most efficient
FROM tab1
JOIN tab2 ON (...
v1,v2,...
BEGIN
OPEN c_all_data;
LOOP
FETCH c_all_data BULK COLLECT INTO v1, v2, ....... LIMIT 1000;
FOR i IN 1 .. v1.COUNT
LOOP
--write to your file
UTL_FILE...
END LOOP;
EXIT WHEN c_all_data%NOTFOUND;
END LOOP;
CLOSE c_all_data;
END;
Maybe you are looking for
-
1. Specific new images are uploaded but will not display in Firefox 8 on my Mac with OS 10.6.8. (Does appear in other browsers, e.g., Chrome and Opera, and appears on Firefox 8 for PC.) Also, other images on the page display. 2. I have cleared cache,
-
How can I create an apple ID without having a credit card, for my IPad??
I´ve already created the ID, but I´m not allowed downloading apps without reviewing mi ID in the iTunes store. The problem is that while I`m reviewing my account, I´m asked to give a credit card number, etc. there is not another option, at least in t
-
Div id without definition in css layout file
Hi, I noticed that I can insert a div id which doesn't have the corresponding definition in my css file? I don't see any warning from Dreamweaver 4. <div id="main-content"> Is this allowed? what is supposed to happen in this situation? I was expectin
-
Anyone Know how to compile a WSDL File
Anyone Know how to compile a WSDL File
-
SetJPEGEncodeParam method not found
Hi, We are group of students working on college project. We want to capture webcam and show stream on screen. We are using JMF and class JPEGImageEncoder. Here we are getting setJPEGEncodeParam method not found error. Please see detail error message