Need someone help in SAPMV45A_CHECK_VBAP

Dear all,
I have confront following problem in SO items quantity checking :
When I process the checking in SO items , I need to know the whole item list which have already been inputed by user.
But in USER-EXIT SAPMV45A_CHECK_VBAP, I can not found the table that contained the whole content which be saw
in screen. And I also can not use the SAPMV45A_SAVE_PREPARE, for I am using the BAPI to simulate the process of
creating SO and catch some error.
So, the USER-EXIT SAPMV45A_CHECK_VBAP is the one what I can only use in the BAPI checking.
Have someone got any idea?
e.t.
0010 material A 100 PC
0020 material B 200 PC
When I begin to chek material A , I need to know the material B quantity too, for material B is the alternative material of A,
if the control quota is 299 PC. The program should not let the material A with 100 PC or material B wiht 200 PC pass the checking. As material A + material B = 300 PC > 299 PC (control quota)

Since I found the XVBAP will be filled one line by on line when item checking is prcessed in SAPMV45A_CHECK_VBAP.
So I try to check the quota in the last line when the XBAP is full of data. Or persuade the customer the logic that
when B is aternative materil of A , material A is vice verse, then I can chek the alternative material when it appear again.

Similar Messages

I need someone help me about "Call Failed".

Excuse me. I live in Taiwan and my english is poor.
I have a strange problem.
When I receive a phone call or call out, I press the "Speaker" to talk then my phone shows "Call Failed" every time.
I try to restore my phone, but the "Speaker" still don't work.
Is this the firmware or hardware problem?
Have someone the same problem?
(My phone is iPhone 3G 16GB, Model MB500T, Version 2.2.1, Modem Firmware 02.30.03)
Please, I need your help.

I live in Taiwan, but I bought the iPhone in Italy.
So the agent of Taiwan don't fix or replace it.
I feel so sadly.

Folder and ! - i need someones help!

from looking at previous posts seems this is a pretty common problem...
my ipod is showing the folder and exclamation mark, and isnt recognized by itunes or the updater...
is there anything i can do before paying for it to be fixed?
please someone help!

See this.
Changing the display language.
Once you've done that, post back and tell us if you have any further problems.
The rotating circle means the iPod is communicating with your computer. Normal to see this whilst it's either transferring songs, or when you first connect it.

Need someone helps for several Problems on my 9630 Tour

Hello,
Well, these are list of problems with my 9630 Tour, and I need some helps to solve these :
1. My 1st problem is, everytime my 9630 started its also a message appears : "uncaught exception index 8 >= 8"
2. And I also realized that some missing application happened. My m-Banking application (already re-installed well) but it also lost of SMS icon. So the result is, everytime I sent an outgoing SMS I couldn't save it. And I have made a test to sent SMS from my other number to this 9630 device, but 9630 couldn't show that any incoming message, even my other device has given me notification that message has been delivered.
3. Its also often shutdown suddenly by itself, or its shutdown upon charging
4. Charging tasks sometime couldn't be well charged. And finally I realized that my device has off in the middle of charging task, it may caused of charging wasn't recharge the device very well
Hopefully I can read your kindly solution on those problems happened. Thank you for your prompt response.
Anwar Hussein

Hi and Welcome to the Community!
I actually think that all of your issues are related, and rooted in the same problem...OS corruption or hardware failure. But, before you begin, please be sure you have a good backup...see the link in my auto-sig on this post for instructions for that process.
Then, at the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My switch Linksys srw224g4 has problem and I need someone help

Hello,
My switch Linksys srw224g4 has problem that it keeps rebooting continuously and cannot bootup successfuly. Can someone tell me how to fix this problem? Firmware version is 1.2.2b , boot version is 1.0.2
Here is console capture:
==================
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
Device configuration:
Slot 1 - SRW24F4G HW Rev. 0.2
Tapi Version: v1.3.3.1
Core Version: v1.3.3.1
01-Jan-2000 01:01:09 %SYSLOG-F-OSFATAL:
L FATAL ERROR: ROOT: ABORT DATA exception
***** FATAL ERROR *****
SW Version : 1.2.2.16
Version Date: 20-Mar-2007
Version Time: 11:44:49
Instruction 0x121fc0
Exception vector 0x10
Program state register 0x20000013
***************** SYSTEM RESET *****************
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
DelScr fatal Error: Invalid Variant type01-Jan-2000 01:01:03 %SYSLOG-F-OSFATAL: DelScr fatal Error
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.2.2b (date 20-Mar-2007 time 11:44:49)
***************** SYSTEM RESET *****************
Thanks,
Tien

Hi,
Please follow the steps in this link to reload the image:
http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
And this is the link to download boot code 1.00.86:
http://ip.gliebetronics.com:800/firmware/Linksys%20SRW2024/Firmware/
Hope this help.

Please! I need someone help with a game

I got this Error everytime the scene is reseted. I have no clue where mistake is made. Please help!
TypeError: Error #1010: A term is undefined and has no properties.
    at golfer_fla::MainTimeline/resetScene()
    at golfer_fla::MainTimeline/golfer_fla::frame1()
TypeError: Error #1010: A term is undefined and has no properties.
    at golfer_fla::MainTimeline/resetScene()
    at golfer_fla::MainTimeline/countDown()
    at flash.utils::Timer/flash.utils:Timer::_timerDispatch()
    at flash.utils::Timer/flash.utils:Timer::tick()
If that helps I could send my game by mail so someone could check the error which constantly pop out when the golfer hit the ball, ball stops and the scene resets.
Here is the code:
//Variables
var myHead = new head();
var myArms = new arms();
var myBody = new body();
var myStick = new stick();
var myGround = new ground();
var myFlag = new flag();
var myCapsel = new capsel();
var grassMask:Number;
var speedUp:int = 2;
var speedDown:int = speedUp * 8;
var checker:int;
var minPower:int;
var maxPower:int = 110;
var strength:Number;
var capselPower:Number;
var distance:Number;
var target:int;
var tryShot:int = 0;
var myTimer = new Timer(2000, 1);
//EventListeners
stage.addEventListener(KeyboardEvent.KEY_DOWN, onDown);
stage.addEventListener(KeyboardEvent.KEY_UP, onUp);
stage.addEventListener(Event.ENTER_FRAME, hit);
myTimer.addEventListener(TimerEvent.TIMER, countDown);
//Functions
function resetScene():void {
    addChild(myBody);
    addChild(myArms);
    addChild(myHead);
    addChild(myStick);
    addChild(myGround);
    addChild(myFlag);
    addChild(myCapsel);
    grassMask = (320 + Math.random()*260);
    myBody.x = 70;
    myBody.y = 296;
    myArms.x = 68;
    myArms.y = 276;
    myArms.rotation = 0;
    myHead.x = 70;
    myHead.y = 215;
    myStick.x = 68;
    myStick.y = 276;
    myStick.rotation = 0;
    myCapsel.x = 90;
    myCapsel.y = 331;
    myGround.x = 0;
    myGround.y = 375;
    myGround.grassMask.x = grassMask - 610;
    myFlag.x = grassMask;
    myFlag.y = 375;
    checker = 0;
    minPower = 0;
    target = 0;
    tryShot ++;
    myCapsel.capselFall.gotoAndStop(1);
    myMessage.text = "Press any key!";
resetScene();
function invisibleCapsels():void {
    a1.visible = false;
    a2.visible = false;
    a3.visible = false;
    a4.visible = false;
    a5.visible = false;
    a6.visible = false;
    a1.gotoAndStop(1);
    a2.gotoAndStop(1);
    a3.gotoAndStop(1);
    a4.gotoAndStop(1);
    a5.gotoAndStop(1);
    a6.gotoAndStop(1);
invisibleCapsels();
function onDown(e:KeyboardEvent):void {
    checker = 1;
    minPower = -20;
function onUp(e:KeyboardEvent):void {
    checker = 0;
    capselPower = (myCapsel.x + myStick.rotation) * 3.2;
function hit(e:Event):void {
    if(tryShot < 7) {
        if((checker == 1) && (myStick.rotation < maxPower)) {
            myStick.rotation += speedUp;
            myArms.rotation += speedUp;
            } else {
                if(myStick.rotation > minPower) {
                    myStick.rotation -= speedDown;
                    myArms.rotation -= speedDown;
                if(myStick.hitTestObject(myCapsel)) {
                    stage.addEventListener(Event.ENTER_FRAME, shot);
            } else {
                myMessage.text = "Game Over\nClick to play again";
                stage.addEventListener(MouseEvent.MOUSE_DOWN, playAgain);
function playAgain(e:MouseEvent):void {
    resetScene();
    invisibleCapsels();
    tryShot = 1;
    stage.removeEventListener(MouseEvent.MOUSE_DOWN, playAgain);
function shot(e:Event):void {
    strength = (capselPower - myCapsel.x);
    distance = grassMask - myCapsel.x;
    if((Math.round(distance) <= 10) && (Math.round(distance) >= 3) && (strength <= 65)) {
        if(target == 0) {
            myCapsel.capselFall.play();
            myCapsel.rotation = 0;
            target = 1;
            this["a" + tryShot].visible = true;
            myMessage.text = "Cooool!";
            myTimer.start();
        } else {
            if(strength > 5) {
                myCapsel.x += strength / 30;
                myCapsel.rotation += strength / 4;
                } else {
                    this["a" + tryShot].visible = true;
                    this["a" + tryShot].gotoAndStop(2);
                    myMessage.text = "Bad Luck!";
                    myTimer.start();
function countDown(e:TimerEvent):void {
    resetScene();
    stage.removeEventListener(Event.ENTER_FRAME, shot);

Try adding the following two lines before line 59:
trace(myCapsel);
trace(myCapsel.capselFall);
If one of them traces undefined, it should isolate which object is the problem. If you describe what is involved with that object.child, then it may help generate an idea of what might be wrong.

How to write test procedures of the following code, need someones help

ITS VERY URGENT.....PLEASE SEND ME THE REPLY ON MY EMAIL ID [email protected]
// Account.java - Data class for account files
// MODULE INDEX
// NAME CONTENTS
// Account Constructor
// Account Constructor
// getAccountNo Get account identifier
// getAccountType Get account type
// getCustNo Get customer identifier
// getBalance Get balance
// getCurCode Get currency code
// setAccountNo Set account identifier
// setAccountType Set account type
// setCustNo Set customer identifier
// setBalance Set balance
// setCurCode Set currency code
// MAINTENANCE HISTORY
// DATE PROGRAMMER AND DETAILS
// 6-5-08 TLT Original
// IMPORTATIONS
import java.util.*;
import java.lang.*;
// CLASS DECLARATIONS
public class Account
// INSTANCE DATA
private String accountNo; //Account identifier
private String accountType; //Account type
private String custNo; //Customer identifier
private double balance; //Balance
private String curCode; //Currency code
// CLASS CONSTRUCTOR
Account (
String accountNo) //Account idenfier
     this.accountNo = accountNo;
Account (
     String accountNo, //Account identifier
     String accountType, //Account type
     String custNo, //Customer identifier
     double balance, //Balance
     String curCode) //Currency code
this.accountNo = accountNo;
this.accountType = accountType;
this.custNo = custNo;
this.balance = balance;
this.curCode = curCode;
// Get account identifier
String getAccountNo () {
return accountNo;
// Get account type
String getAccountType () {
return accountType;
// Get customer identifier
String getCustNo () {
return custNo;
// Get balance
double getBalance () {
return balance;
// Get currency code
String getCurCode () {
return curCode;
// Set account identifier
void setAccountNo (
String accountNo)
this.accountNo = accountNo;
// Set account type
void setAccountType (
String accountType)
this.accountType = accountType;
// Set customer identifier
void setCustNo (String custNo) {
this.custNo = custNo;
// Set balance
void setBalance (double balance) {
this.balance = balance;
// Set currency code
void setCurCode (String curCode) {
this.curCode = curCode;
}

123shweta wrote:
ITS VERY URGENT.....W00t? Well if its soo urgent then perhaps you should learn from this and do some planning ahead in the future so you dont find ur self in these urgent needs.
PLEASE SEND ME THE REPLY ON MY EMAIL ID [email protected]
Wat tha.., do you expect someone to just magically solve your problem for ya just like that? with an half asked question even.
Last but not least.. Why would you even need an test for an getters and setter class?

HT4108 Hello I really need someones help I bought the composite AV cable from the apple store to plug my ipad to my dvd player in my excursion to play movies and the video line is not working help

Hello out there, is there someone that has a solution to my problem? I have an Excursion and it has the red,yellow,and white aux outlet and I went to the Apple store and bought the composite AV cable plugged it in and the audio works but the video does not and the manual says that I have to tell the ipad to send the video to the t.v.,projector but I can not find where that function on the ipad. Please help despirate mother of four.

On ipad screen during playback, look for an icon that is a rectangle with a triangle in it.
press it,should see a list of available devices.

Really need someones help

how do i get my ipod touch to work with my itune account its saying tap ok and sign in to see my billing which all that is right my iphone works still just not the ipod can someone please help me

Four Mic inputs, four Mic pre's on the Fasttrack, the OP has four mics. I fail to see "your bad" here... It suits the OPs' requirements...
From the FTU manual:
7 Hardware Connections
Recording Microphones
Fast Track Ultra can record from *up to four microphones simultaneously,* connected to inputs 1 through 4 via the two front-panel XLR/TRS inputs #1 and two XLR inputs #3 . The front-panel front/rear selector switches #4 must be set to the “front” position.

I need someones help!!!

Hi!
I'm tryind to learn how to use interactive forms and I'd like to know if some of you has an archive to read about this.
I'm also having a problem, when I insert a static text on my form and press the activation button it happens 2 things:
1) the text on the static text erases
2) the form doesn't activate
If anyone can help me with any of my doubts, I'd be very pleased.
Thanks!

Hi Ale,
all necessary documentation is in the SAP Help Portal: http://help.sap.com/saphelp_nw2004s/helpdata/en/37/47a2be350c4ac8afe36b691203971f/frameset.htm
More information is also available right here in SDN: http://sdn.sap.com/irj/sdn/adobeforms
The activation issue sounds like a missing SP for your ABAP system. If that's not it, it'll have to be a bug. In that case, please create a customer message.
Best regards,
Markus Meisl
SAP NetWeaver Product Management

HT1338 I cannot open itunes. When I try, a popup says I need quicktime 7.5.5 but I cannot download it. Can someone help??

I cannot open itunes. When I try, a popup says I need quicktime 7.5.5 but I cannot download it. Can someone help??

Quicktime 7.5.5 can be downloaded from this link.
http://support.apple.com/downloads/#quicktime

Airport Utility no longer sees Airport Extreme and I think I need to redo my entire network - can someone help?

I just purchased this new Airport Extreme after my older Airport went down. This Airport Extreme at times is super fast, but it gives me more headaches than the older version because it seems to drop its signal too often. Last week I was able to see my Airport Extreme in my Airport Utility and was able to configure it - now Airport Utility can't find any Airport Extreme, although, it shows that I have an internet connection. I was hoping that someone who knew how to do a nice easy network set-up could help me start from scratch so this is set up right. As of now, our home uses the wi-fi for 2 Wii consoles, a wi-fi printer, cell phones, and an internet connection for my MacBook Pro - not too many connections, but still my connection drops all the time, all day long for no particular reason whatsoever. I want to be able to have one good strong connection for my computer and the rest of the connections could be secondary. I would like if the secondary items used a password, but not the same password as the main connection. It seems to me like I'm not asking a lot, but I have no idea how to set this up because now I can't even find my Airport Extreme to configure it.
So, if anybody has some advice on the best way to set this up and how I would be able to start that process without being able to even detect my Airport Extreme, I would sure appreciate any effort to help me out on this.

Is your profile up to date?? Lion is not so commonly used now.. but was a lot more reliable than Yosemite.
What modem do you have? Actual make and model is a big help.
What is the main router? Is the modem supplied by ISP? Is it a gateway device?
If you use the airport as bridge or router, I also need to know how it is connected into the system. Mostly people have it via ethernet to the main modem or router.. please confirm.
One very important point.. the Wii need WEP security at least for older models.. You must NOT change security on the Extreme.. It must be set to WPA2 Personal (or nothing if you live at least 2km from other humans).
So, if anybody has some advice on the best way to set this up and how I would be able to start that process without being able to even detect my Airport Extreme
reset to factory and you will get control back.
The best way to test is full factory reset.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer or iOS device with latest utility.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen6 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz for each band respectively.. with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem if you are using AE as main router but is a problem for when it is used in bridge.. you have to use dhcp reservation from main router or use static IP on the AE setup.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. If the AE is bridged and still having dropouts use a LAN port to connect to the main router instead of WAN.. we are finding the AE is problematic on the WAN port.

My phone 5s did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone.

My phone 5s 16gb gold did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone. This phone is not even 6 months old been in case no scratches. This is driving me crazy.

Connect your phone to a computer and restore your software using iTunes.

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

Need someone help in SAPMV45A_CHECK_VBAP

Similar Messages

Maybe you are looking for