Need specific window to be closed

Not sure if this is possible...
But i have a set of pages, which are setup to refresh after
20 minutes to
the main home page.. only with no activity.
But the issue im having is that if someone decides to stop in
the middle of
this process and wants to quit they cant get out.. ( we are
setting up an
application for in-house use and we have our terminals
secured to prevent
anyone from opening a new browser window to cruise the
internet... )
So that said.. i need to add an exit button to each page so
they have the
ability to quit the process without having to wait 20minutes
to refresh the
page...
1 thought was to create a link to a pop-up that confirmed
they wanted to
quit.. if they select yes i need it to close the main window
and the pop-up
window. ( this may not work since our network guys do not
want pop-up
browser windows to open.)
Other thought would be like some or most banks that have that
grey pop-up
window(not brower window) that informs you that your session
is about to
expire, click ok to continue or cancel to log out.. that may
be the way to
go, but how to accomplish that?
Any suggestions? sites on how to do this? other ideas?
Using ASP, VB, SQL2005 and DW8

Actually i need to re-direct to the main page, not actually
close the page.
Using ASP, VB, SQL2005 and DW8
"Daniel" <[email protected]> wrote in message
news:f5gtck$r9p$[email protected]..
> Not sure if this is possible...
>
> But i have a set of pages, which are setup to refresh
after 20 minutes to
> the main home page.. only with no activity.
>
> But the issue im having is that if someone decides to
stop in the middle
> of this process and wants to quit they cant get out.. (
we are setting up
> an application for in-house use and we have our
terminals secured to
> prevent anyone from opening a new browser window to
cruise the
> internet... )
>
> So that said.. i need to add an exit button to each page
so they have the
> ability to quit the process without having to wait
20minutes to refresh
> the page...
>
> 1 thought was to create a link to a pop-up that
confirmed they wanted to
> quit.. if they select yes i need it to close the main
window and the
> pop-up window. ( this may not work since our network
guys do not want
> pop-up browser windows to open.)
>
> Other thought would be like some or most banks that have
that grey pop-up
> window(not brower window) that informs you that your
session is about to
> expire, click ok to continue or cancel to log out.. that
may be the way to
> go, but how to accomplish that?
>
> Any suggestions? sites on how to do this? other ideas?
>
> --
> Using ASP, VB, SQL2005 and DW8
>

Similar Messages

  • How big of a partition do I need for windows Xp?

    How Big of a partition do I need for Windows XP? And to be able to run visual Basics program?

    Nobody can answer that question with any certainty because we don't know your computing needs and what specific apps you're going to isntall.
    Regardless, this forum is for the troubleshooting the installation of OS X, not Boot Camp, and you'll probably want to post your question over in the Boot Camp forums:
    http://discussions.apple.com/category.jspa?categoryID=237

  • Get the title of a specific window not part of your app

    For an app I am writing I need to get the name of the titles of the current programs running .
    Does anyone know of a way to accomplish this (get the title of a specific window not part of your app) in Java?
    Thank you very much.
    Erik

    Crossposted, obviously with no concern over wasting the time of would-be answerers.
    http://forum.java.sun.com/thread.jspa?threadID=686650

  • ABAP Web Dynpro Window Inactive After Closing Popup Window

    Hello ABAP'ers
    I have a custom ABAP Web dynpro applications that uses multiple tiers of popup windows.  This application was functioning properly in our ECC6.0, Basis release 7.00 Service level 15 environment.  However, we are currently installing EHP4 and moving or basis release to 7.01 service level 5. In this new environment, when multiple popup window tiers are closed simultaneously, the underlining window is not re-activated.
    Here's a more specific description:
    The application starts with a control panel window presenting a series of buttons.  Selecting one of these buttons activates a modal (I know... all web dynpro popups are modal) popup window for the purpose of maintaining some object.  If the user attempts to exit this window without saving the changes, another popup window appears asking if they want to save their changes.  If they say no, both the popup window asking the question and the popup maintenance window are closed, thus returning the user to the switchboard.
    The problem is that none of the functionality on the switchboard is active. the user must manually refresh the URL to "reactivate" the switchboard. 
    When only a single popup window is closed, the underlying window is properly reactivated.  The problem only occurs when multiple popups are closed together.
    Has anybody else seen this occur? Any ideas / notes around to correct it?
    Any info is greatly appreciated.
    R/
    Jim M

    Hello Jim, hello everyone,
    I am encountering the same issue.
    Is a solution known already?
    Thanks
    Johannes

  • When downloading it says it will continue when windows messenger is closed.  It's not open? help!

    When I tried to download, it said it would continue when windows messenger
    is closed, but it is not open and I don't know what to do now.  Can anyone help?

    Hi, You still need to right click on the icon in your system tray and disable it anyway.
    Thanks,
    eidnolb

  • Capture a specific window with all the data even those that is not shown

    Hi,
    I want to capture a specific windows with all of its data, even the data that is not shown and the user have to scroll dpwn to see it.
    i already did and manged to capture all of the screen with the Robot class, but i need more.
    thanks,
    Eitan.

    Hi,
    I want to capture a specific windows with all of its data, even the data that is not shown and the user have to scroll dpwn to see it.
    i already did and manged to capture all of the screen with the Robot class, but i need more.
    thanks,
    Eitan.

  • I have two windows open and accidently closed one of them. There does not seem any option to restore that window I accidentally closed.

    I had multiple windows opened and accidentally closed one of the windows. How do I restore the window I accidentally closed?

    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Windows hides some file extensions by default.
    Among them are .html and .ini and .js and .txt, so you may only see file name without file extension.
    You can see the real file type (file extension) in the properties of the file via the right-click context menu in Windows Explorer.

  • HT4818 hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx

    hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
    Sebastian

    hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
    Sebastian

  • I need specific directions on how to set up 2 iPads to same iTunes account.

    I need specific directions on how to set up 2 iPads to 1 iTune account.  I want both iPads to receive some things alike - calendar, contacts, etc.  I want same book on both but to open to correct page for each iPad reader.  Games on both but levels for each iPad user.

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.
    It sounds as if you have already found the method to change your card details, but just to confirm: go to the iTunes Store. Click 'Account' under 'Quick links' at the right. Log in.
    Where it says 'Payment Information' click on 'Edit' to the right of it.
    You should then be able to enter the correct card details.
    Is this not working? Do you get an error message?

  • I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows 7. Could i have some advise in  what is better for me, Bootcamp or parallels

    I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows . Could i have some advise in  what is better for me, Bootcamp or Parallels

    The Intuit rep said they don't "support" QuickbooksPremier on a "virtual machine." Do you know what I risk by using it, anyway? thanks for the advice about Boot Camp vs Parallels, BTW!
    I use QuickBooks Pro for Mac, so I haven't had need to try any of the Windows versions in a VM. But I can't think why it wouldn't work. From within the VM, QuickBooks Premier would believe it is operating on PC hardware within Windows.
    I would guess they mean that the multiple user support wouldn't work from within the VM. But I would think that would also work. Windows can see the Internet from within the VM, which means it can see your network. So if Windows can see the network, then QB Premier should be able to, too.
    I know you can get Parallels as a demo, and maybe you could get QB Premier as trial software. So if you already have a retail copy of Windows to load into a VM, it would only cost you time to test what's possible.

  • How to activate group specification window in snro ?

    Hi, all SAP experts,
    In t-code snro for object AUFTRAG i click on delete group ref. tab in group specification window and saved. Now i want that group specification window , so how can i get that window for particular object in t-code snro?
    Please give me reply
    regards,
    Yogesh

    Hello everybody
    Unfortunately I still couldn't find helpful answers. Isn't there a way to activate those generic object services in VA02, VA03 e.g. like it is available out of the box in MM02, MM03, FB02, FB03, etc.?
    We would like to link a sales order (business object type BUS2032) with an URL pointing to a PDF-Document.
    Thanks in advance for any help on this one.
    Renaud

  • Why we need specification and body in Packages

    Hi all
    Why we need specification and body in packages
    is Package body is not enough?
    It is an interview question asked
    How can I explain
    regds

    1. Package specification is the interface.
    Package body is the implementation or detail code.
    If one has built a package, he/she just need to publishs
    the interface without a need to publish the detail implementation, so it will simplify to end user by hiding the detail.
    2. Using only a Package body is identical to make separate subroutine. One pkg body will need one subroutine, if there are 10 pkgs body there will be 10 individual subroutine. Using package will give simplicity to manage the code, and also give speed in execution.

  • Need a windows script to check all unix db boxes are pinging ?

    Hi ,
    I need a windows script to check all unix remote db boxes are pinging ?
    I need to show the output in an html file.
    Can anyone suggest ideas ?

    I have a script that "kind of" works. The only problem I've seen is that it gets confused when filenames contain characters that are fine in Macland but not good in Unixland. Forward slashes are a good example of this.
    In this case I have a folder in my home named "copytest" Inside copytest are two folders:
    Source (containing the images to be added)
    Dest (My existing library of images)
    It also assumes that the folder of images to be added contains no sub-folders. Hope this helps.
    tell application "Finder"
    set theSource to folder "source" of folder "copytest" of home
    set imagesToBeCopied to name of every file of theSource
    end tell
    repeat with theFile in imagesToBeCopied
    try
    if (do shell script "find -r ~/copytest/dest -name " & quoted form of (theFile as string)) is not equal to "" then
    --The file exists. Don't copy it
    else
    --the file doesn't already exist. Copy it.
    end if
    on error
    return "Failed while trying to check for existence of a file"
    end try
    end repeat

  • How browser window can be closed in WD ABAP

    Hi,
    Please suggest how browser window can be closed in WD ABAP?
    Regards,
    Anindita

    Alternatively, just use the FPM framework - it can detect that the application is in it's own browser window when launched from the portal and enables a "close" button.
    You can also create a FPM close event which closes the application:
    data: lo_fpm type ref to if_fpm.
      lo_fpm = cl_fpm=>get_instance( ).
       lo_fpm->RAISE_EVENT_BY_ID( cl_fpm_event=>gc_event_close ). 
    As this is handled within the framework you have access to the standard eventing and checking - so ensuring application is in a fit state to exit etc.

  • I have a HP laptop, i need a Windows 7 operating disk

    I have a HP laptop that my husband is trying to fix for my sister-n-law.  She purchased it in 2010 and my husband is needing a Windows 7 operating disk in order to fix it.  Could you please let me know how we can get one?
    Thank you

    June1991 wrote:
    I have a HP laptop that my husband is trying to fix for my sister-n-law.  She purchased it in 2010 and my husband is needing a Windows 7 operating disk in order to fix it.  Could you please let me know how we can get one?
    Thank you
    Hi, try this:
    http://www.pcworld.com/article/248995/how_to_install_windows_7_without_the_disc.html
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Maybe you are looking for

  • The message pane obstructs view in landscape mode.

    In the landscape mode of my iPhone 6+, the left hand pane which displays messages (in the message app) or recent emails (in the email app) obstructs useable screen space.  I am a 2 thumb typer and like using the landscape view for messages and email.

  • Hi, i cant update my ipod touch software version.

    Hi, I think I've got the 2nd ot 3rd generation of ipod touch. its basically like the newer version, but without the camera. When i click on check for update, it says its update, but its not up to date because my sister has got a better version. i ask

  • ODI Procedure to File Mapping

    HI, My scenario is like this i have a package/function in db which returns a custom type. Now i want to transform this custom type into a flat file. Here is my procedure : Declare v_return_value XXTLN_EMP_ASSG_DATA_TAB := XXTLN_EMP_ASSG_DATA_TAB ();

  • How to show invisibles (non-printing characters) in Keynote?

    Great thanks to anyone who can help find what in Keynote '09 is clicked or keyed to show invisibles (non-printing characters).

  • (probably quite simple?) Samba troubles

    I've set up a few shared folders using samba, and I can see them both in Arch and over the network in XP. Although when I try to open any of them, in either OS, it says they aren't accessible. Here is the the log of my XP machine trying to connect: [