Need sql querry to retive the data from sysdate to last365 days data.
Hi ,
I need sql querry to retrive the data based on this condition:date Between Previous 365 days and current day.
emp sal date
1 200 03-mar-2011
1 200 03-mar-2008
1 200 06-mar-2012
1 200 03-mar-2003
1 200 03-mar-2004
1 200 03-mar-2005
and so on.......lot of records....
i need the all the employee data from currentdate(sysdate) to previous 365 days data...
Edited by: 937506 on Jun 7, 2012 4:26 AM
937506 wrote:
Hi ,
I need sql querry to retrive the data based on this condition:date Between Previous 365 days and current day.
emp sal date
1 200 03-mar-2011
1 200 03-mar-2008
1 200 06-mar-2012
1 200 03-mar-2003
1 200 03-mar-2004
1 200 03-mar-2005
and so on.......lot of records....
i need the all the employee data from currentdate(sysdate) to previous 365 days data...
Edited by: 937506 on Jun 7, 2012 4:26 AMJust you can do this
<date_column> between sysdate-365 and sysdateAnd DATE is a reserved word and you cannot use it as a column name.
Similar Messages
-
How to select data from a table using a date field in the where condition?
How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay -
Months ago I opened an account at Argentina store. Recently I moved back to my born country, Brazil. How I need to proceed to change the country from Argentina to Brazil, keeping my ID, password and not lose my purchased content? I share the content with my iPhone4, my iPad2 and all sync with my MacPro
Also see http://support.apple.com/kb/TS3998
-
How to display data from a recordset based on data from another recordset
How to display data from a recordset based on data from
another recordset.
What I would like to do is as follows:
I have a fantasy hockey league website. For each team I have
a team page (clubhouse) which is generated using PHP/MySQL. The one
area I would like to clean up is the displaying of the divisional
standings on the right side. As of right now, I use a URL variable
(division = id2) to grab the needed data, which works ok. What I
want to do is clean up the url abit.
So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
I want is clubhouse.php?team=Wings.
I have a separate table, that has the teams entire
information (full team name, short team, abbreviation, conference,
division, etc. so I was thinking if I could somehow do this:
Recordset Team Info is filtered using URL variable team
(short team). Based on what team equals, it would then insert this
variable into the Divisional Standings recordset.
So example: If I type in clubhouse.php?team=Wings, the Team
Info recordset would bring up the Pacific division. Then 'Pacific'
would be inserted into the Divisional Standings recordset to
display the Pacific Division Standings.
Basically I want this
SELECT *
FROM standings
WHERE division = <teaminfo.division>
ORDER BY pts DESC
Could someone help me, thank you.Assuming two tables- teamtable and standings:
teamtable - which has entire info about the team and has a
field called
"div" which has the division name say "pacific" and you want
to use this
name to get corresponding details from the other table.
standings - which has a field called "division" which you
want to use to
give the standings
SELECT * FROM standings AS st, teamtable AS t
WHERE st.division = t.div
ORDER BY pts DESC
Instead of * you could be specific on what fields you want to
select ..
something like
SELECT st.id AS id, st.position AS position, st.teamname AS
team
You cannot lose until you give up !!!
"Leburn98" <[email protected]> wrote in
message
news:[email protected]...
> How to display data from a recordset based on data from
another recordset.
>
> What I would like to do is as follows:
>
> I have a fantasy hockey league website. For each team I
have a team page
> (clubhouse) which is generated using PHP/MySQL. The one
area I would like
> to
> clean up is the displaying of the divisional standings
on the right side.
> As of
> right now, I use a URL variable (division = id2) to grab
the needed data,
> which
> works ok. What I want to do is clean up the url abit.
>
> So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
> all
> I want is clubhouse.php?team=Wings.
>
> I have a separate table, that has the teams entire
information (full team
> name, short team, abbreviation, conference, division,
etc. so I was
> thinking if
> I could somehow do this:
>
> Recordset Team Info is filtered using URL variable team
(short team).
> Based on
> what team equals, it would then insert this variable
into the Divisional
> Standings recordset.
>
> So example: If I type in clubhouse.php?team=Wings, the
Team Info recordset
> would bring up the Pacific division. Then 'Pacific'
would be inserted into
> the
> Divisional Standings recordset to display the Pacific
Division Standings.
>
> Basically I want this
>
> SELECT *
> FROM standings
> WHERE division = <teaminfo.division>
> ORDER BY pts DESC
>
> Could someone help me, thank you.
> -
I need a query that selects the amount of records for each day in a table.
I need a query that selects the amount of records for each
day in a table.
Eg the result would be:
date 1 14
date 2 3
etc
Any ideas?sorted:
SELECT count([commentID]),convert(varchar, dateAdded, 112)
FROM COMMENTSgroup by convert(varchar, dateAdded,
112) -
Why select data from Function directly (SE37) got data , but when use funct
why select data from Function directly (SE37) got data , but when use function in program donot found data
i use function
CS_BOM_EXPL_MAT_V2
when i run function directly at SE37 .
i found data.
but when i use same function in program .
system not found.
please see my attachment.
help me please.
[http://www.quickfilepost.com/download.do?get=c974356a498b3a4d369aa0c50622e50b]
http://www.quickfilepost.com/download.do?get=c974356a498b3a4d369aa0c50622e50bI know why U get empty data.
In Program U should follow the rules:
U'd better data a variant typed the function parameters's type.
for example:
in your program the parameter: stlal = '1'
U'd better like follow:
Data l_stlal type STKO-STLAL
l_stlal = '01'. *Attention: '1' <> '01'.
stlal = l_stlal.
in this way U may have less mistake
and the parameter MTNRV
U should use material convernt : "CONVERSION_EXIT_MATN1_INPUT" to change material into internal types before U put into function's parameter.
why se37 has no problem? because In se37, the data you filled was be processed before use -
Need Sql Query that Suppress the repeating rows.
Hi Sir,
I have below data set.
DeptID Sum(SAL) Avg(Sal)
10 1300 1300
10 2450 1300
10 5000 1300
20 800 800
20 1100 800
20 2975 800
20 3000 800
30 800 800
30 1100 800
30 2975 800
40 3000 800
40 4000 900
I Need SQL query that can remove the duplicate or suppress.Just like below data set.
Output:
DeptID Sum(SAL) Avg(Sal)
10 1300 1300
2450 1300
5000 1300
20 800 800
1100 800
2975 800
3000 800
800 800
30 1100 800
2975 800
40 3000 800
4000 900
Could you please help me on this..Your requiremnt is more of a reporting request which should not be handled in SQL. For example in SQL Plus you can use the BREAK command
SQL> break on deptno
SQL> select deptno, ename from emp order by deptno;
DEPTNO ENAME
10 KING
CLARK
20 JONES
SCOTT
SMITH
ADAMS
30 TURNER
MARTIN
WARD
ALLEN
BLAKE
11 rows selected.
SQL>
But if you still wish to do it in SQL you can use ROW_NUMBER analytic function and achieve it like this
select decode(rno, 1, deptno) deptno
, ename
from (
select row_number() over(partition by deptno order by ename) rno
, deptno
, ename
from emp -
Need sql querry for PreviousYear First Day Same Month And Currentday rec
Hi ,
I hAVE TABLE FOR EXAMPLE,
emp sal Arrivaldate
111 200 03-mar-2011
100 200 03-mar-2008
150 200 06-mar-2012
170 200 03-mar-2003
178 200 03-mar-2004
112 200 12-jun-2012-------------------->For Example THIS IS TABLE WE HAVE LOT OF RECORDS
I need querry to get based on this condition:Arrival Date is between Previous Year First Day Same Month And Current day.
Any one help me on this.....Hi,
To get the records between Previous Year First Day Same month to Current day..
SELECT TRUNC (ADD_MONTHS (SYSDATE, -12), 'MM') AS last_yr_first_date, TRUNC(SYSDATE) AS PRESENT_DATE
FROM DUAL;Which Outputs to:
LAST_YR_FIRST_DATE PRESENT_DATE
6/1/2011 6/13/2012When you give TRUNC(sysdate) It will removes the Time part of the SYSDATE.
For Ex :
TRUNC(SYSDATE) means that is 6/13/2012 which doesn't give the time part in the query.
Which takes into account the day start that is from 12:00 A.M to today midnight 11.59 P.M.
And, One thing is that
emp sal Arrivaldate
111 200 03-mar-2011
100 200 03-mar-2008
150 200 06-mar-2012
170 200 03-mar-2003
178 200 03-mar-2004
112 200 12-jun-2012The arrivaldate is in Character format so you need to convert to date type as
SELECT TO_DATE(ARRIVALDATE,'DD-MON-YYYY') from your_table;
and the comparison can be done as
SELECT *
FROM YOUR_TABLE
WHERE TO_DATE (ARRIVALDATE, 'DD-MON-YYYY')
AND TRUNC (ADD_MONTHS (SYSDATE, -12), 'MM')
AND TRUNC (SYSDATE);Good day!!!!!!!!!!!!!!!!!!!!!!!!
Thanks,
Shankar -
How do you Select data from two tables with similar data amd merge the output together.
I have two Tables containing Sales Data. I want to read the Table a sort by date and accumulate dollars by order date. Then I want to read the second table and accumulate these dollar amounts by date and then merge the records together so that I gave 1 row
with amounts for type A and amounts for type b.
Here are the tables I am looking at.
Select Cast(J.Order_Date As Varchar(11))) As [Order Date]
,Sum(Case when Sales_Code like '%Comm%' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Comm]
,Sum(Case when Sales_Code = '5-Day' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Auto]
,Sum(Case when Sales_Code like '%Auto%" then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Auto]
,Sum(Case when Sales_Code = '' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Fixed]
,Sum(Case when Sales_Code = 'XX' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Comm)
,Sum(Case when Sales_Code = 'YY' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Auto)
,Sum(Case when Sales_Code = 'ZZ' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Fixed)
from [PRODUCTION].dbo.Job As J
union all
Select Cast(SH.Order_Date As Varchar(11))) As [Order Date]
,Sum(Case when Sales_Code like '%Comm%' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Comm]
,Sum(Case when Sales_Code = '5-Day' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Auto]
,Sum(Case when Sales_Code like '%Auto%" then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Auto]
,Sum(Case when Sales_Code = '' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Fixed]
,Sum(Case when Sales_Code = 'XX' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Comm)
,Sum(Case when Sales_Code = 'YY' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Auto)
,Sum(Case when Sales_Code = 'ZZ' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Fixed)
from [PRODUCTION].dbo.SO_Detail As SD
Inner Join [PRODUCTION].dbo.SO_Header As SH
on SD.Sales_Order = SH.Sales_Order
Group by J.Order_Date
Order by J.Order_Date Desc
Looking for output like
Order Date Job Comm Job AUto Job Fixed SO Comm SO AUto SO Fixed
Mar-11-2014 100.00 250.00 50.00 200.00 300.00 400.00
Mar-10-2014 500.00 340.00 0.00 110.00 400.00 500.00
Mar-09-2014 600.00 333.00 56.00 210.00 500.00 300.00
Thanks for your help
SWProductionSeeing the output it looks like what you need is this
select COALESCE(p.[Order Date],q.[Order Date]) AS [Order Date],
COALESCE([Job Comm],0) AS [Job Comm],
COALESCE([Job AUto],0) AS [Job AUto],COALESCE([Job Fixed],0) AS [Job Fixed],COALESCE([SO Comm],0) AS [SO Comm],COALESCE([SO AUto],0) AS [SO AUto],COALESCE([SO Fixed],0) AS [SO Fixed]
from
Select Cast(J.Order_Date As Varchar(11))) As [Order Date]
,Sum(Case when Sales_Code like '%Comm%' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Comm]
,Sum(Case when Sales_Code = '5-Day' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Auto]
,Sum(Case when Sales_Code like '%Auto%" then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Auto]
,Sum(Case when Sales_Code = '' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Fixed]
,Sum(Case when Sales_Code = 'XX' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Comm)
,Sum(Case when Sales_Code = 'YY' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Auto)
,Sum(Case when Sales_Code = 'ZZ' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Fixed)
from [PRODUCTION].dbo.Job As J
)p
full join
Select Cast(SH.Order_Date As Varchar(11))) As [Order Date]
,Sum(Case when Sales_Code like '%Comm%' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Comm]
,Sum(Case when Sales_Code = '5-Day' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Auto]
,Sum(Case when Sales_Code like '%Auto%" then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Auto]
,Sum(Case when Sales_Code = '' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Fixed]
,Sum(Case when Sales_Code = 'XX' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Comm)
,Sum(Case when Sales_Code = 'YY' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Auto)
,Sum(Case when Sales_Code = 'ZZ' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Fixed)
from [PRODUCTION].dbo.SO_Detail As SD
Inner Join [PRODUCTION].dbo.SO_Header As SH
on SD.Sales_Order = SH.Sales_Order
Group by J.Order_Date
)q
on p.[Order Date] = q.[Order Date]
Order by COALESCE(p.[Order Date],q.[Order Date]) Desc
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Need to fetch results as the output from QGA2
Hi Gurus,
My scenario is that i need to develop an interface in which I would send Material,Plant,MIC and Period from one system to SAP R/3 and I need to fetch the output as I get the output from QGA2 while i enter the above mentioned fields.
Input: Material,Plant,MIC and Period
Output:
1) Inspection Start Date
2) Inspection Lot number
3) Material
4) Material Description
5) UD code and code group
6) Quality Score( at inspection lot level)
7) UD code text
8) Valuation of characterstic
9) System Status of lot
10) Characterstcic description
11) Operation Number at which charaterstic was inspected
12) Characterstic Number inspected
Please let me know any BADI or FM which could help me in fetching out these values as standard QGA2 transaction does fetch out these values.
Thankshi
Please check
BAPI_INSPCHAR_GETREQUIREMENTS
BAPI_INSPCHAR_GETRESULT
BAPI Modify result lot inspection
Regards
Sujit -
I am extracting the data from ECC To bw .but Data Loading taking long tim
Hi All,
i am extracting the data from ECC To BI Syatem..but Data Loading Taking Long time. from last 6 hoursinfopackage is running.still it is showing yellow.Manually i made the red.and delete again i applied repeat of the last delta.but same proble is coming .in the status job is showing bckground job is not finished at source system.we requested to basis.basis people killed that job.again we schedule the chain also again same problem is coming.how can i solve this issue.
Thanks ,
chanduHi,
There are different places to track your job. Once your job is triggered in BW, you can track your load job where exactly it is taking more time and why. Follow below steps:
1) After InfoPackage is triggered, then take the request number and go to source system to check your extraction job status.
You can get the job status by taking the request number from BW and go to transaction SM37 in ECC. Then give the request number with begining '' and ending ''. Also give '*' to user name.
Job name: REQ_XXXXXX
User Name: *
Check the job status whether job is completed or cancelled or short dump. If the job is still running check in SM66 whether you can see any process. If not accordingly you got to check in ST22 or SM21 in ECC. If the job is complete, then the same in BW side now.
2) Check the data arrived in PSA, if not check whether Transfer routines or start routines are having bad SQL or code. Similarly in update rules.
3) Once it is through in Source system (ECC), Transfer rules , Update Rules, then the next task is updating the data might some time take more time which might be based on some parameters ( Number of parallel process to update database ). Check whether updating the database is taking more time and may be you got to check with the DBA guy also.
At all the times you should see minimum of atleast once process running all the time in SM66 till the time your job gets complete. If not you will see a log in ST22.
Let me know if you still have questions.
Assigning points is the only way of saying thanks in SDN.
Thanks,
Kumar. -
Need SQL help to pull the accounts
I have a table with account and publications(300 to 305). Each account is associated with more 1 to 5 publications. Now i want accounts that are associated with greater than or equal to 2 publications. I need your help with the SQL. Thanks.
Maybe
select account
from accounts
group by account
having count(publication) > 1Regards
Etbin
Edited by: Etbin on 1.11.2011 21:59
or
select a.account
from accounts a,publications p
where a.account = p.account
group by a.account
having count(p.publication) > 1 -
Need sql querry for getting previous day records only
Hi ,
i have a table with following records,
emp sal date
111 200 03-mar-2011
100 200 03-mar-2008
15 200 06-mar-2012
17 200 03-mar-2003
178 200 03-mar-2004
11 200 11-jun-2012
i need only previous day records only(11 200 11-jun-2012).can any one help on this query?insa wrote:
Except trun you can use Like operator--
select * from emp where date like sysdate-1;
Is it helpful for you?That is most certainly not a helpful answer. the LIKE operator is a string comparison operator and should not be used with dates. Doing so will cause an implicit date to character conversion based on the sessions NLS settings and would be not different to doing:
select * from emp where to_char(date) = to_char(sysdate-1)... which will cause a lack of index usage, and also not deal with any time component within the date.
Please ensure you test your answers before posting them. Several people had already given correct answers here with explanations as to why they are better than other methods. -
Do I need government ID to pickup the item from the apple store?
I am looking to get the Government employee discount. I know that if you buy the item from the store you will need to ID. If you order it online you do not need any kind of proof. Will that still apply if I what to pay for it online and pick it up at the store? Will I just need what is required for any regular pickup?
You need photo ID to pick up an on-line order at an Apple store...if you have received a discount, that ID is needed...did that with an educator discount and had to have the school staff ID. If you are Federal Government make sure you take your ID as proof.
That has been my experience purchasing that discount way. -
Data from 3 tables having latest dates
Hi,
Need some help with PL/SQL code, I need to write a code which will get data from 3 tables all with the latest date.
For a particular ACT_CODE the output of the SQL query should show data having the latest dates from 3 tables, if there is no
date in the table, it should show the remaining data (think left join will do the trick here)
Table Names:
Institution_UPDT aiu
ASQ_CONTACT ac
GR_AUTHORIZE gr
All 3 tables have ACT_Code as common
Column Names
INSTITUTION_UPDT aiu -- aiu.ACT_CODE,aiu.project_id as proj,aiu.UPDT_TYPE_ID, aiu.USER_ID, aiu.UPDT_DATE
ASQ_CONTACT ac -- ac.ACT_CODE as contact_code,ac.project_id,ac.first_name, ac.middle_initial,ac.last_
name,ac.title,ac.status,ac.status_date
GR_AUTHORIZE gr --gr.ACT_CODE as grad_code,gr.name, gr.title AS grad_title, gr.submit_date
The date column names are
ac.status_date,
aiu.UPDT_DATE and
gr.submit_date
Thank you everyone
appreciate your help
JeshHi, Jesh,
user11095252 wrote:
That is correct, I want to include all the columns from ASQ_Contacts, Institution_UPDT and GR_AUTHORIZEOh! You want all columns from all three tables, not just ASQ_Contacts. That changes the problem considerably!
UNION requires that all prongs have the same number of columns, and that the datatypes of the columns match. That's no problem if we just need act_code and a date from each one. If we just need additional columns from one table, it's easy to add literal NULLs to the other prongs to serve as the additional columns. But if we need all (or even several) columns from all three tables, that's no good. So let's revert to your original idea: outer joins.
I want to display only one row which has the latest date with the most recently updated time (example:mm/dd/yyyy hr:min:sec am/pm)Yes, but what if there is a tie for the most recently updated time?
In case of a tie, the query below will pick one of the contenders arbitrarily. That may be fine with you (e.g., you may have UNIQUE constraints, making ties impossible). If you need a tie-breaker, yiou can add more columns to the analytic ORDER BY clauses.
WITH aiu AS
SELECT institution_updt.* -- or list columns wanted
, ROW_NUMBER () OVER ( PARTITION BY act_code
ORDER BY updt_date DESC
) AS r_num
FROM institution_updt
WHERE act_code = :p1_act_code
AND project_id = :p2_project_id
, ac AS
SELECT asq_contact.* -- or list columns wanted
, ROW_NUMBER () OVER ( PARTITION BY act_code
ORDER BY status_date DESC
) AS r_num
FROM asq_contact
WHERE act_code = :p1_act_code
AND project_id = :p2_project_id
, gr AS
SELECT gr_authorize.* -- or list columns wanted
, ROW_NUMBER () OVER ( PARTITION BY act_code
ORDER BY submit_date DESC
) AS r_num
FROM gr_authorize
WHERE act_code = :p1_act_code
SELECT * -- or list columns wanted
FROM aiu
FULL OUTER JOIN ac ON ac.act_code = aiu.act_code
AND ac.r_num = 1
AND aiu.r_num = 1
FULL OUTER JOIN gr ON gr.act_code = NVL (ac.act_code, aiu_act_code)
AND gr.r_num = 1
;That's a lot of code, so there may be typos. If you'd post CREATE TABLE and INSERT statements for a few rows of sample data, I could test it.
In all places where I said "SELECT *" above, you may want to list the individual columns you want.
If you do that in the sub-queries, then you don't have to qualify the names with the table name: that's only required when saying "SELECT *" with another column (r_num, in this case).
It's more likely that you won't want to say "SELECT *" in the main query. The three r_num columns, while essential to the query, are completely useless to your readers, and you might prefer to have just one act_code column, since it will be the same for all tables that have it. But since it may be NULL in any of the tables, you'll have to SELECT it like this:
SELECT COALESCE ( aiu.act_code
, ac.act_code
, gr_act_code
) AS act_codeThe query above will actually work for multiple act_codes. You can change the condidition to something like
WHERE act_code IN (&act_code_list)If so, remember to change it in all three sub-queries.
Maybe you are looking for
-
Problem connecting MBP to established Linksys wireless network (Part 2)
Thanks to all who followed part 1 thread. I have been trying to wirelessly connect my new MBP 2.16 to my established linksys BEFWS11S4 network. I gave up on 128 encryption for now, MBP couldn't take it. by playing with the setting and manual config I
-
Due to the processing impact of upgrading to CS3, I'm going to spend a couple of dozen hours buildling a new one. I'm requesting feedback to the HD setup. Here is what I'm thinking for HD setup (Q6600 Quad, 4gb Mem,Gigabyte MoB): Option 1: OS/Program
-
How to run projects on Wireless Toolkit on Solaris 10?
Hi, I've installed Solaris 10 on x86. After that I've installed Wireless toolkit and Netbeans Mobility pack. I was able to install both of them but, Now, when I try to run any J2ME application I get an error "Cannot find /lib/ld-linux.so.2" and somet
-
How to prepopulate child process form in access policy
Hi, I have different groups in access policy and corresponding to each group we have different roles. This group and role mapping is stored in a lookup.I have to fetch the value from the lookup to the process form child table according to the group a
-
I've got a weird issue I'm not sure how to trouble shoot... Using DW CS3, PHP/MySQL on Mac OS 10.5 Implemented WebAssist's DataAssist to generate database management pages. When I attempt to insert a new record with the insert page, the Results page