Do I need government ID to pickup the item from the apple store?

I am looking to get the Government employee discount. I know that if you buy the item from the store you will need to ID. If you order it online you do not need any kind of proof. Will that still apply if I what to pay for it online and pick it up at the store? Will I just need what is required for any regular pickup?

You need photo ID to pick up an on-line order at an Apple store...if you have received a discount, that ID is needed...did that with an educator discount and had to have the school staff ID.  If you are Federal Government make sure you take your ID as proof.
That has been my experience purchasing that discount way.

Similar Messages

  • We are using SAP SRM to punch out external catalogs. Firefox version 3.5 and below works fine and the items from the catalogs are brought back to SRM .But when we use version 3.6.12 the items are not getting transferred back to SRM from the Catalogs.

    SRM is a procurement system from SAP which we use to purchase goods and service. We have external catalogs like officemax, cdw etc which we punchout the items and bring it to SRM for ordering.
    When we use firefox version 3.5 and below the items which we add from the Catalogs are correctly brought back to SRM for us to order. But when we use versions 3.6.12 the items are not brought back to SRM.
    Internet Explorer 7 and 8 works fine. Is there anyway you can help us.
    Thanks
    Jayant

    Hi,
    Firstly I would suggest you to upgrade your database from Oracle Release 11.2.0.1.0 to Oracle Release 11.2.0.2 . This is the recommended Oracle 11g database version  for SAP solutions. Many of your problem will get resolved with it.
    Question 1:
    So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
    For immediate resolution the approach you have followed is correct viz limiting number of dialog processes for RFC. Secondly you need to analyze why RFC processing takes so much time. You need check which programs are getting executed by those RFC.
    Generate EarlyWatch report for more detailed view
    Question 2:
    My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before.
    The libttsh11.so library cannot be found in the related directory.
    Cause
    The file system is mounted using CIO option, but per Note 257338.1 Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L, an ORACLE_HOME on a filesystem mounted with "cio" option is not supported.
    Such a configuration will cause, installation, relinking and other unexpected problems.
    Solution
    Disable the CIO option on the filesystem.
    References
    NOTE:257338.1 - Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L
    Hope this helps.
    Regards,
    Deepak Kori

  • Hello I have a problem with the iPhone from China apple store

    Hello
    I have a problem with the iPhone and I do not know who to turn to.
    I bought an iphone 4 in the Apple Store in Shanghai, and it has a bug! I changed the regional settings to my native language, but the search in safari goes site the Google.cn.
    What should I do? On this particular no one says. This is clearly a bug!
    Also in my phone no youtube. I know that youtube banned in China, but I'm not in China now!
    Why do not you strapped local restrictions on the location of the phone??

    eh...
    The reason I bought the iphone in China - the price is reduced by 50% сompared to the price in Russia.
    I just thought that these restrictions are useless. And Apple should remove them when you change the region ...

  • HT4314 I didn't receive the item from the game after purchased

    Dear Sirs
    I didn't via the game to buy some cash point (you may refer to my order no: .
    Here's the summary duplicate:-
    訂單編號:
    收據日期:12/04/21
    訂購價格總計: $24.98
    寄款人: VISA .... 7253
    項目
    開發人員
    類型
    單價
    Derby Days, 55 Cash point
    回報問題
    Com2uS Inc.
    App 內建購買功能
    $4.99
    Derby Days, 250 Cash point
    回報問題
    Com2uS Inc.
    App 內建購買功能
    $19.99
    訂購價格總計:
    $24.98
    Actually i didn't receive 55 cash point from the game of Derby Days (Com2uS Inc.)  I found it via i purchased the cash point, the games is without connection for very long time ago. 
    I can't contact them, can you help me to deducted(refund) for US$4.99.
    Please advise.
    Tks
    Sally
    <Edited by Host>

    Thanks for your information.  Actually i did want to try your suggested method to report my issue.  But I can't go to that report page.  I don't know why, i tried in differnt pc and reopen and clsoed the account for serveral time.  Anyways, I found another method to report my issue. 
    Once again thanks for your assistance.

  • How do you designate a family member to pickup an item at an Apple Store?

    I just bought a Macbook Pro and can't figure out how I can designate my son to pick it up for me.

    For most orders, you can have a friend or family member make your pickup. AFAIK, only unlocked iPhones must be picked up by the person who placed the order. Read here:
    http://store.apple.com/us/browse/home/personal_pickup

  • Need some help with downloading PDF's from the net.

    need some help with downloading PDF's from the net.  Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen?  any suggestions?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Can't remove items from the selectMenu

    I am using selectMenu as:
    <a4j:region selfRendered="true"  id="text">
                <h:selectOneListbox id="symbol" value="#{user.name}">
                  <f:selectItems value="#{user.temp_list}" />
              </h:selectOneListbox>
    <a4j:commandButton action="#{user.getData}" reRender="symbol" value="Get"/>
    </a4j:region>temp_list has following three values when page loads:
    temp_list.add(new SelectItem("Sunday"));
    temp_list.add(new SelectItem("Monday"));
    temp_list.add(new SelectItem("Tuesday"));Now in user.getData i want to remove items one by one based on the selection made by the user. The code is:
    temp_list.remove(0);
    this.setTemp_list(temp_list);But the problem is that if user selects Sunday for example, it remove it from the list but next time when user select Monday it removes monday but BRING BACK SUNDAY AGAIN IN THE LIST. Why is it so?

    BalusC wrote:
    I don´t understand you.Actually i was asking about the code which i mentioned in my last post.
    Okay then what could be the solution? What my thinking is that calling list.remove actually removes the item from the list permenantly, isn't it? If so then why does it showing me again in the selectMenu?

  • How to delete the item from Delivery?? (Handling Unit)

    Dear SDNs,
    I have a scenario of HU (Handling Unit).
    Now here I have a case where the complete cycle is done. But end user now wants to change/delet the item in Delivery. So I have guided them to reverse all documents and it is done.
    Now delivery is in Editable Mode. Now here when I try to Delete Delivery Line Item.. It is giving Error like "Item has already been packed and therefore cannot be deleted"
    Diagnosis says "It is not possible to delete packed items."
    Procedure says "Unpack the item from the shipping unit before you delete it."
    Now when I select Line Item and click the PACK Button to go to the screen for "Processing of Handling Units for outbound Delivery XXXXXXX", it goes to the screen but here there is not Existing HUs available to Delete/Empty... whole screen is Blank.. even no Material to be packed...
    I think user have proceeded the cycle without HU assignment.
    So now I want to Delete the Line Items and want to insert fresh Items again...
    Any inputs???
    Thanks & Regards,
    HP

    Hardik Patel,
    I have checked your equirement frankly speaking i was not exposed to such an scenario. I got alink which will help you
    Handling Unit and Packing used across all modules.
    [http://help.sap.com/saphelp_47x200/helpdata/en/c8/a44b749f3211d2858d0000e81ddea0/frameset.htm]
    Here to your left choose Packing --> Working with Handling units --> Unpacking
    Therein you will have Unpacking, Deleting  HAndling units
    Just Check....
    Regards
    Sathya

  • The Subsequent Requirm not getting deleted after deleting the Item from P.O

    Hi all
    The Subsequent Requirment for the Material is not getting  cancelled even after deleting the Item from the Purchase Order  and we have even deleted the Requirment for the Top level material . If we click on the Pegging requirment for the Subsequent requirment the system is telling that no Pegging Requirment exists but it is not getting deleted. Waiting for the feed backs

    Kumar,
    Run MRP for the Materials involed and let us know if there are any exception messages.
    Regards,
    Prasobh

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

    Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
    The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
    Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
    Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
    I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
    For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
    Thanks

    You got a confirmation from AT&amp;T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
    Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
    When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
    Are you with me so far? - Yes.
    And @ Varjak is right that after the 3rd restore I get the replacement error. 
    Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Message was edited by: jabgars

  • How do I export apps from my iPhone to my iMac? I received notice that there is an update now for the iOS in my iPhone, but that I first needed to transfer some files (apps?) from the iPhone to my iMac. But I cannot find anything in the Help menu on this.

    How do I export items from my iPhone to my iMac? Apple sent me a message to my iPhone, saying that there is an update for iOS, to 6.1.3, but before I install this update, I should first transfer some items from the iPhone to my iMac; otherwise I would lose these items (apps?)
    I have two problems with this:  1) I don't know what files I should transfer, and 2) I don't how to transfer from an iPhone to an iMac (but do know how to download apps from iTunes Store to my iMac, and then to my iPhone.
    Very confusing! Any help/suggestions gratefully accepted.
    DBH

    Move the cursor to the very top of the computer's screen, click on File, and choose Transfer Purchases. If you need to authorize the computer, the command is in the Store menu.
    (79537)

  • This may be a duplicate but, I have a new ipad mini that I need to activate but I need to get my data from my 1pad 1 which has never been backed up.  How do I get the data from the ipad 1 to the new mini?  I have itunes acct and also Icloud acct.  Thanks

    I have a new ipad mini that I need to activate but I need to get the data from my old ipad 1 and install on the new mini.  I have a itunes acct and also icloud acct.  How do I back up the ipad 1 data and then activate the mini.  I assume I will need to transfer the sim from the ipad 1 to the mini.
    Thanks for any info
    wino454

    How to Transfer Everything from an Old iPad to New iPad
    http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
     Cheers, Tom

  • Need how to get the data from the external file in eCatt

    Hi ,
      Could any body suggest how to get the values from the external file(Excel,CSV file,Text file) and pass it as varaiable in ecatt Test script.
    Problem: Need to execute FK01-Vendor creation Transaction with multiple set of data .As per my understanding we could achive through Variants in Testdata set in eCatt .
    But is there any way to store the data in excell file and get the data and pass it to FK01 Test scripts
    Appreciate response on this

    Hi
    See the links they may be useful
    check these link,
    eCATT- An Introduction
    /people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
    Creating Test Scripts
    /people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
    eCATT Logs
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    eCATT Scripts Creation – TCD Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    Creation of Test Data Container
    /people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
    eCATT Scripts Creation - SAPGUI Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    Integrating ECATT & MERCURY QTP Part -1
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Using eCatt to Test Web Dynpro ABAP
    /people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
    and
    -command reference
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
    /people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
    http://prasadbabu.blogspot.com
    https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    http://www.erpgenie.com/ecatt/index.htm
    hope this helps.
    Reward points for useful Answers
    Regards
    Anji

  • I try to sync my nano and get:  the ipod cant be synced because there is not enough free space to hold all of the items in the items library (need 100MB) - I have a new computer?? can you help me understand this message: what to do?

    I try to sync my nano and get:  the ipod cant be synced because there is not enough free space to hold all of the items in the items library (need 100MB) - I have a new computer?? can you help me understand this message: what to do?

    Hello pryan1012,
    What this message means is that you have more music in your itunes library than there is free space in your ipod.
    I had this same issue at one time. This is what helped me put my music on the ipod. I used manually manage.
    Learn how to sync muisc here.
    Hope this helps.
    ~Julian

Maybe you are looking for

  • Snow Leopard Breaks Bonjour Printing (HP Color Laserjet)

    Hi, I have a MacBook (newly reformatted) with the newest version of print drivers from HP's website, connected to a HP Color Laserjet CM1312nfi, with print sharing enabled and "share this printer over the network checked". It used to work well for Bo

  • I have a question. my ipod won't mount

    I have 3rd generation ipod 40gb. The ipod plays fine (whats on it) but when i plug it in the bells go off and the ipod reads "do not disconnect" but itunes won't open and if i open it myself it still dosen't see the ipod. I was going to retore it but

  • I'm trying to find a good entry level gaming PC :)

    Hello, I'm new to PC gaming and I'm looking for a computer that is good for me to start on.  Now I've been looking around and I don't really know what I'm looking for.   http://www.bestbuy.com/site/HP+-+Pavilion+Desktop+-+10GB+Memory+-+1TB+Hard+Drive

  • Black screen - can not get in touch with my Ipod Nano

    I have an Ipod Nano, latest model. After a short time the monitor shuts down and turns black / standby, can ths be disable? I use my Nano with the Nike Ipod censor when I run, and it is diffical to get in touch with my Ipod Nano, when the screen afte

  • HT201263 need help restoring my ipod

    step 4 does not show on m ipod it still showes disable...... Wht else can I do ?????