Need Steps to Schedule InfoPackage Groups and InfoPackage

Hi ,
please let me know the steps and also differences between InfoPackage Groups and InfoPackage.
bab

HI,
In the info package groups you can schedule multiple info packages and u can run a info package if the previous one is succesful if not stop the load ..
We do have some options in loading multiple info packages..
And info package is specific to that only...
The T-codes to monitor are RSMO and RSMON(Info package groups).
Bye,
Shashikanth.

Similar Messages

Need help in arranging choice group and textfield on screen

Hi friends
i want to display choice element (along with its text) and textfield(small one) in a single row.i want many such rows.
i tried my best to do that.but couldent get as what i wished ,textfields comes down.
Actually i want value inside textfield and name of the choice element when i click on any choice element,I did that functionality but only alignment is problem.
if anyone has tried or any idea about how to get this alignment please let me know.

you can achieve this fairly easily with group policy.
create an OU and put your remote desktop servers in that OU.
configure both user and computer policies in a group policy and link it to that ou.
you need to enable loopback mode - you may want it in merge or replace depending on your other policies you have. Probably replace though I would guess. this is set in the computer configuration > admin templates > system / group policy section.
now remove the policy you have currently setup for your users on the users OU containing the rdp users. If you want you can move these users back to your main users OU.
when your users login to the RDP server the settings in the user section of the GPO linked to the RDP Servers OU will apply.
when the user logs in to their own computer the policies from the user OU and computer OU will apply - but not the more restrictive RDP OU.
hope that makes sense.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount 28

Post Author: tadj188#
CA Forum: Formula
Needed: Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount > 28
Background:
1) Report SQL is created with unions to have detail lines continue on a page, until it reaches page footer or report footer, rather than using subreports.    A subreport report is now essentially a group1a, group1b, etc. (containing column headers and other data within the the report    with their respective detail lines). I had multiple subreports and each subreport became one union.
Created and tested, already:
1) I have calculated @TotalLineForEachOfTheSameGroup, now I need to sum of the individual same group totals to get the total line count on a page.
Issue:
1) I need this to create break on a certain line before, it dribbles in to a pre-printed area.
Other Ideas Appreciated:
1) Groups/detail lines break inconveniently(dribble) into the pre-printed area, looking for alternatives for above situation.
Thank you.
Tadj

export all image of each page try like this
var myDoc = app.activeDocument;
var myFolder = myDoc.filePath;
var myImage = myDoc.allGraphics;
for (var i=0; myImage.length>i; i++){
    app.select(myImage[i]);
    var MyImageNmae = myImage[i].itemLink.name;
    app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.high;
    app.jpegExportPreferences.exportResolution = 300;
       app.selection[0].exportFile(ExportFormat.JPG, File(myFolder+"/"+MyImageNmae+".JPEG"), false);
    alert(myImage[i].itemLink.name)

Function Groups and Function Modules

Hi,
Can anyone give me the detail steps for creating Function Group and then from that function group creation of function module with example?
Regards,
Chandru

Hi,
Function Group creation -
       A function group is a program that contains function modules. With each R/3 system, SAP supplies more than 5,000 pre-existing function groups.
     In total, they contain more than 30,000 function modules. If the functionality you require is not already covered by these SAP-supplied function modules, you can also create your own function groups and function modules.
      We can put all the relevant function modules under one function group and all the global variables can be declared in this FG.
FG Creation:
1)     Function group can be created in SE80. There choose the 'Function Group' from the list of objects.
2)    Then give a name for ur function group (starts with Y or Z) and press ENTER.
3)   The click 'YES' in the create object dialog box and give a short desc. for this FG and save.
Function Module:
             A function module is the last of the four main ABAP/4 modularization units. It is very similar to an external subroutine in these ways:
Both exist within an external program.
Both enable parameters to be passed and returned.
Parameters can be passed by value, by value and result, or by reference.
The major differences between function modules and external subroutines are the following:
Function modules have a special screen used for defining parameters-parameters are not defined via ABAP/4 statements.
tables work areas are not shared between the function module and the calling program.
Different syntax is used to call a function module than to call a subroutine.
Leaving a function module is accomplished via the raise statement instead of check, exit, or stop.
A function module name has a practical minimum length of three characters and a maximum length of 30 characters. Customer function modules must begin with Y_ or Z_. The name of each function module is unique within the entire R/3 system.
Defining Data within a Function Module
Data definitions within function modules are similar to those of subroutines.
Within a function module, use the data statement to define local variables that are reinitialized each time the function module is called. Use the statics statement to define local variables that are allocated the first time the function module is called. The value of a static variable is remembered between calls.
Define parameters within the function module interface to create local definitions of variables that are passed into the function module and returned from it (see the next section).
You cannot use the local statement within a function module. Instead, globalized interface parameters serve the same purpose. See the following section on defining global data to learn about local and global interface parameters.
Defining the Function Module Interface
To pass parameters to a function module, you must define a function module interface. The function module interface is the description of the parameters that are passed to and received from the function module. It is also simply known as the interface. In the remainder of this chapter, I will refer to the function module interface simply as the interface.
To define parameters, you must go to one of two parameter definition screens:
1) Import/Export Parameter Interface
2) Table Parameters/Exceptions Interface
Then in the FM interface screen, give the following
1) Import parameters
2) Export parameters
3) Changing parameters
Then give
1) Define internal table parameters
2) Document exceptions
You enter the name of the parameter in the first column and the attributes of the parameter in the remaining columns. Enter one parameter per row.
Import parameters are variables or field strings that contain values passed into the function module from the calling program. These values originate outside of the function module and they are imported into it.
Export parameters are variables or field strings that contain values returned from the function module. These values originate within the function module and they are exported out of it.
Changing parameters are variables or field strings that contain values that are passed into the function module, changed by the code within the function module, and then returned. These values originate outside the function module. They are passed into it, changed, and passed back.
Table parameters are internal tables that are passed to the function module, changed within it, and returned. The internal tables must be defined in the calling program.
An exception is a name for an error that occurs within a function module. Exceptions are described in detail in the following section.
Syntax for the call function Statement
The following is the syntax for the call function statement.
call function 'F'
    [exporting   p1 = v1 ... ]
    [importing   p2 = v2 ... ]
    [changing    p3 = v3 ... ]
    [tables      p4 = it ... ]
    [exceptions x1 = n [others = n]].
where:
F is the function module name.
p1 through p4 are parameter names defined in the function module interface.
v1 through v3 are variable or field string names defined within the calling program.
it is an internal table defined within the calling program.
n is any integer literal; n cannot be a variable.
x1 is an exception name raised within the function module.
The following points apply:
All additions are optional.
call function is a single statement. Do not place periods or commas after parameters or exception names.
The function module name must be coded in uppercase. If it is coded in lowercase, the function will not be found and a short dump will result.
Use the call function statement to transfer control to a function module and specify parameters. Figure 19.9 illustrates how parameters are passed to and received from the function module.
sample FM
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
I_CALLBACK_PROGRAM                = ' '
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
IT_FIELDCAT                       =
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    t_outtab                          =
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example
1 report ztx1905.
2 parameters: op1 type i default 2,   "operand 1
3              op2 type i default 3.   "operand 2
4 data rslt type p decimals 2.        "result
5
6 call function 'Z_TX_DIV'
7       exporting
8            p1      = op1
9            p2      = op2
10      importing
11           p3      = rslt.
12
13 write: / op1, '/', op2, '=', rslt.
Regards,
Shanthi.P
Reward points if useful ****
Edited by: shanthi ps on Jan 26, 2008 12:03 PM

Differences Between Infopackage Groups and Process chains

Hi All,
Can anybody explain me what are the differences between Infopackage Groups and Process Chains ? And how process chains are more comfortable

hi nagarjuna,
An InfoPackage group is a collection of InfoPackages. In order to summarize data requests which logically belong together from a business point of view, and to therefore simplify the request, you can collect data requests (meaning the InfoPackages) into an InfoPackage Group. You can schedule each of these groups in the scheduler . With the data request the scheduler can access InfoPackage groups directly and thereby request more than one InfoPackage at a time, corresponding to the setting in the InfoPackage group. Thus, you can support InfoPackage groups with the serialization of your data requests.
While a process chain is a sequence of processes that wait in the background for an event. Some of these processes trigger a separate event that can start other processes in turn. hit this link to know abt PCs:
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
Process chains are more comfortable becoz itz not like infopackages where we have to schedule each pack individually. And in PCs, monitoring is very convenient since u see evrything in a single page.
regards
sham'm

Error when scheduling infopackage

hi all,
when i am trying to scheduling infopackage its giving error like
Runtime Errors DBIF_RSQL_SQL_ERROR
Except. CX_SY_OPEN_SQL_DB
SQL ERROR IN DATABASE WHEN ACCESSING A TABLE.
This error is occuring in production system.please guide me how to resolve this issue.
regards
Vamshi D Krishna

Hi,
these type of error will usually occur for tablespace or disk space not enough.
pls check ur oracle database for tablespace.just make a try to increase the space and again try ur process.
thnks.

ECM 11.1.1.5.0 - need steps for SSO integration and configuration

Hi,
I want to upgrade recent UCM 10g to ECM (or Webcenter Content) 11g. I passed via upgrade process and it looks it is working fine. Need some validation, but basically upgrade went fine.
But I lost SSO (Windows Login) functionality, asi this ECM 11g is weblogic based and uses a bit different authentication than old version.
My current test instance setup is:
Oracle database 11gR2
Weblogic 10.3.6.0
Oracle Enterprise Content Management Suite (ECM) 11.1.1.5.0
All running on the same linux machine
Currently I am only able to:
- define static users / groups in the weblogic's default authenticator
- define ldap authenticator in weblogic which can authenticate users defined in ldap
And I need to make it SSO capable (meant once user is authenticated in our windows domain, then when using Internet Explorer there is no need to enter user/password anymore)
I read some documentation and there they claim Oracle Identity Management / Access Manager is the right solution. But I do not know how to properly install and configuration of this.
Is there anybody here in this world who would provide some simple steps what needs to be done for enabling SSO for ECM 11.1.1.5.0 ?
When I read oracle documentation I am finding it to be written too much in general with too many referencing to too many other documents... I am searching for some kind of simplified installation guide for getting this SSO thing working.
Anybody here who could support me?

Hi
Steps for integration SSO (be it OAM or Oracle SSO or AD / LDAP etc ) the steps remain same except for one .
1. On WLS create the identity store provider .
This can be OID Authenticator , AD Authenticator , LDAP Authenticator depending on what you are using to store the users and their roles /groups etc .
2. Create SSO Identity Asserter .
This should be either AD Asserter (in case of using AD) , OAM Identity Asserter (if using OAM) , SSO Asserter (if using OID based SSO solution) .
3. Order the providers created in the following order and the respective flag settings :
Identity Asserter - REQUIRED
Identity Store Provider - SUFFICIENT
Default Authenticator - SUFFICIENT
After this is created stop UCM and WLS .
Start WLS admin , once it is up and running start UCM server .
Go to WLS - Security Realm - myrealm - Users and groups and verify the right set of users are seen with their correct groups .
Now launch UCM server and depending on which SSO solution is used the login page will vary where in the SSO user id / pwd can be entered .
Hope this helps .
Thanks
Srinath

Parameterized Data Selection in Scheduler Infopackage in BW

hei...is there any way that i can parameterized the data selection in the scheduler infopackage? When i wanna load the data from the scheduler, the data selection will change based on the source systems. Let say today got data in the source system, then the scheduler can auto select today's date to load the data, if let say next monday 25th of feb got data, then the scheduler will auto select the date 25th of feb and load the data from the source system to BW.
thanks...

Hi,
Not sure I understood this fully.
For each source system there would be 1 infoapckage as it is created on the datasource.
Now for your requirement you can write a routine inside the infoapckage to load the data for the current data.
Bye
Dinesh

Need info regarding Oracle UCM Accounts and Security Groups behaviour

Need information regarding Oracle UCM Accounts and Security Groups behaviour.
Oracle UCM version: 11.1.1.5.0
Steps:
1. Log in with "weblogic" user and created a content with id "content1"
2. Applied "@acc1(R)" and "TestGroup1" to the cotent created in step 1
3. Log out
4. Log in as "acc1user1", the user is not able to see the "content1"
5. Log out
6. Log in as "role1user1", the user is not able to see the "content1"
Account and Group information:
1. User "acc1user1" is part of "@acc1(R)"
2. User "role1user1" is part of "role1(R)" and is mapped to "TestGroup1" in UCM
Expected:
Both "acc1user1" and "role1user1" should be able to see "content1" as they have at least Read permission.
Please help me understand why the users are not able to see the content.

ACLs, like Accounts, are optional security setting which may add on some extra functionality to mandatory security groups. Likewise, the resulting permission is taken as an intersection of SG and ACLs.
But in the second part the number of set of users is huge (approx say 600)I don't get this completely. Does this mean that those "sets of users" (users who see the same data) are distinct and that there is 600 of such groups?
If you read thoroughly the manual I sent earlier, there is a recommendation that there should be maximum 50 security groups, and you should use accounts, should this number be exceeded. This means you could have all the documents in one security group (and have one common role with Read permission), but combine it with accounts. ACLs are not a good choice here - their performance and manageability is much worse than of accounts. ACLs are primarily used if you expect security settings to change during the lifetime (e.g. a project manager adds temporarily rights to access an item to another user, and revokes it when the user finishes his or her work).
Note that accounts as well as permissions of users within accounts can also be mapped externally (from LDAP/AD) and it usually follows some kind of org chart.
I'd feel more comfortable not to speak about users, security groups, roles, etc., but about some real-life objects and scenarios.

I need step by step guide to install MSI package through group policy

I need step by step guide to install MSI package through group policy its about.
I tried a lot using software deployment with GPO but its not happening may be I am doing mistake I am not getting.
help.
Thanks,
Mohan

Hi,
Maybe we could refer to the following Microsoft KB article for
detailed information about how to use Group Policy to remotely install software.
How to use Group Policy to remotely install software in Windows Server 2008 and in Windows Server 2003
http://support.microsoft.com/kb/816102
Hope this helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Would Like to Get Report of Daily Emails In and Out from Members to a DL Exchange version : 2007 I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity is it possible ?

Would Like to Get Report of Daily Emails In and Out from Members to a DL
Exchange version : 2007
I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity
is it possible ?

Well, distribution groups don't really have a concept of "in" or "out". They only serve to distribute messages sent to them -- unless you're asking to know who was a member of the distribution group at the time a message was sent to the DL.
Message tracking logs hold the information you want, though. You'd have to look for EXPAND events that reference the distribution group and take the sender's e-mail address from that event. If the DL is a simple one that's not a member of any other groups
you could also look for RECEIVE events sent to the e-mail address of the group and get the sender's name from that event.
You can use Powershell extract the rows of data from the logs, but you'll have to write the code to get the data out of those rows and into a format you want. Perhaps LogParser could be useful in place of Powershell?
--- Rich Matheisen MCSE&I, Exchange MVP

Short dump while scheduling infopackage

Hi,
im getting short dump while scheduling infopackage for( 0cfm_init_positions )as it is giving dump like MESSAGE_TYPE_X runtime error in BI test system but in dev it's working fine if anybody knows how to resolve??.

hi
this is due to existence of TRFC-Packages for old failed requests in the source system.
so for this QM-Action in the request monitor change manually to red.
if you wont find the solution contact basis team.
or
use SE16. Look at RSSDLINIT table. Match up the LOGSYS with your OLTPSOURCE (for the infopackage that is causing the problem). Delete that line(s) Now you can open the infopackage. (be sure to delete the initialization) before you run the info pack again.)
Also you can check SAP Note : 852443
check this links
Short dump MESSAGE_TYPE_X while trying to open infopackage
DUMP IS COMMING WHILE CREATING INFOPACKAGE

IDOC to File Scenario - Configuration steps need to be done in R3 and XI

Hi Experts,
I am working with IDoc to File scenario. Can someone please explain, what are the steps or configuration things need to be done in R3 and as well as in XI too.
Thanks in advance.
Regards,
Sree

Hi Sree,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this answers your query.
Regards,
Abhy Thomas

Need scripts for fetching groups and subgroups info , script for del users

Hi ,
I need a script or macro which will fetch list of groups and sub groups triend forums download did not fine one.
I need another script which will delete listed users there is a macro in forums but it doesn't suit my rquirement.
Any one have these scripts handy with you please help me with that,
Regards,
Neo.

Hi Braham,
Thanks for your quick reply.
Are we able to do this on two stage method
1. grab the security groups from the share paths
if can grab the share path from a separate txt file than copying it to the <your path> location
so i can modify the txt file
once run the script
if can the output like below to a CSV file
\\servername\foldermain\folder1group 1group 2group 3\\servername\foldermain\folder2group 1group 2group 3then i know which groups belongs to which share paththen i can remove the duplicate groups and keep the common groups to grab the users belongs to itso with the second script same as the first copy the security groups to a txt file and the out put as below.what I needs is the users full name and the samaccount name ( user id )group 1user1user2user3
group 2user1user2user3looking forward your help on thisThank you.Thilo

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
          <property file="./Properties/fuego_deploy.properties"/>
          <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
               properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
                    importdata = "${fuego.importdata}"
                    automaproles="${fuego.automaproles}"
                    automapbuspars = "${fuego.automapbuspars}"
                    automapvars="${fuego.automapvars}"
                    automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
#      •Holiday and Calendar rules
#      •Organizational Units
#      •Roles
#      •Resource configurations
#      •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

Need Steps to Schedule InfoPackage Groups and InfoPackage

Similar Messages

Maybe you are looking for