ECM 11.1.1.5.0 - need steps for SSO integration and configuration

Hi,
I want to upgrade recent UCM 10g to ECM (or Webcenter Content) 11g. I passed via upgrade process and it looks it is working fine. Need some validation, but basically upgrade went fine.
But I lost SSO (Windows Login) functionality, asi this ECM 11g is weblogic based and uses a bit different authentication than old version.
My current test instance setup is:
Oracle database 11gR2
Weblogic 10.3.6.0
Oracle Enterprise Content Management Suite (ECM) 11.1.1.5.0
All running on the same linux machine
Currently I am only able to:
- define static users / groups in the weblogic's default authenticator
- define ldap authenticator in weblogic which can authenticate users defined in ldap
And I need to make it SSO capable (meant once user is authenticated in our windows domain, then when using Internet Explorer there is no need to enter user/password anymore)
I read some documentation and there they claim Oracle Identity Management / Access Manager is the right solution. But I do not know how to properly install and configuration of this.
Is there anybody here in this world who would provide some simple steps what needs to be done for enabling SSO for ECM 11.1.1.5.0 ?
When I read oracle documentation I am finding it to be written too much in general with too many referencing to too many other documents... I am searching for some kind of simplified installation guide for getting this SSO thing working.
Anybody here who could support me?

Hi
Steps for integration SSO (be it OAM or Oracle SSO or AD / LDAP etc ) the steps remain same except for one .
1. On WLS create the identity store provider .
This can be OID Authenticator , AD Authenticator , LDAP Authenticator depending on what you are using to store the users and their roles /groups etc .
2. Create SSO Identity Asserter .
This should be either AD Asserter (in case of using AD) , OAM Identity Asserter (if using OAM) , SSO Asserter (if using OID based SSO solution) .
3. Order the providers created in the following order and the respective flag settings :
Identity Asserter - REQUIRED
Identity Store Provider - SUFFICIENT
Default Authenticator - SUFFICIENT
After this is created stop UCM and WLS .
Start WLS admin , once it is up and running start UCM server .
Go to WLS - Security Realm - myrealm - Users and groups and verify the right set of users are seen with their correct groups .
Now launch UCM server and depending on which SSO solution is used the login page will vary where in the SSO user id / pwd can be entered .
Hope this helps .
Thanks
Srinath

Similar Messages

Need steps for rehosting FR currently running on windows 2008 R2 to LinuxOS

Need steps for rehosting FR server currently running on windows 2008 R2 to Oracle Linux 5 OS
I found something for essbase in oracle EPM whitepaper library but not for FR. Did anyone of you out there try this.
Any ideas/thoughts.
Thanks in Advance

If it's 11.1.2.1 or 11.1.2.2 you simply install it in the new host, configure it and you can either manually edit the mod_wl.conf file to point to the new server or you can re-run the web server (OHS) configuration wherever it is installed. Beware though that if you do this you will not be able to run FR against HFM.
Pablo

Need Steps for Configuring BI 7.0 with ECC 6

Hi All,
I need steps for configuring BI 7.0 with ECC 6, Please if anybody has material, Please share with me...
Regards,
Kiran Telkar

Hi,
regarding bi7 and ecc6.0 Configruration,pls chk this
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
http://sheffield.gumtree.com/sheffield/57/13455557.html
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
*pls assign points,if links useful*
regards,
CSM Reddy

Needs steps for Printer setting for User-customized Paper Size

Hii
I need steps for Printer setting for User-customized Paper Size
for my requirement i hav to design this for a paper which is 9cm length and width 23cm and printer is Laser printer
Thanks
Ravi

Hi ,
Kindly send me materials regarding printer configuration , I need to confiure a printer .Kindly help me.
My ID is rakeshhaari at gmail dot com
Regards,
Hari

Steps for Email integration in sap crm system?

Hi Experts,
Please guide me the steps for email integration so that the emails are in syn with the WEB UI Interaction centre.Settings at the backend GUI are already defined.Actually in my case the Development system is not integrated with Email sync in WEB UI.I need to test the email functionality in Development system as steps I have followed are as below:
1)TCode :- SBWP,then I have created a mail & send it to email address which is defined in the SO28
2)TCode :- SOST,there I have clicked on my test mail,select it & click on execute button,green light appears & shows the message that the email is successfully forwarded.
Now when I open Web Ui,select my business role & then I go to inbox in the Navigation Bar,select email & click on search.Then it does not appear anything & shows search result zero.
Kindly suggest me the steps so that I can see my test email in Dev system Web Ui business role .
Thanks
Warm Regards
Vineet Joshi

Hi Prashant,
Thanks for your response. I want steps to configure communication channels like e-mail & fax to facilitate receipt of invoice from vendors, sending of PO to vendors, cheques, payment advices to name a few. Please let me know the detailed configuration steps for the same and also do we need to instal any tool to facilitate this process.
Thanks
Best regards,
Bhaskar
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM

Give me the Configuration steps for intercompany billing and third party s

Hi Gurus,
Give me the Configuration steps for intercompany billing and third party sales and give me a brief description with examples.
Regards,
YSR

Dear YSR
Check the links
[Cross Company Configuration|http://help.sap.com/bp_bblibrary/500/Documentation/J62_BB_ConfigGuide_EN_DE.doc]
[Third Party Without Shipping Notification|http://help.sap.com/bestpractices/BBLibrary/html/J55_ThirdPartyWOSN_EN_US.htm]
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1)
After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always followwing a third party process for a material then you have to create the material using item category group BANS.
The procument type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurment ( in house manufacturing and external procurement).
Step 2)
the item category in the order should be manually changed as TAS.
For that you need to confugure the item category determination
ord type + item cat grp + usge + Hiv level = Item cat + Manual item cat
OR + NORM + + = TAN . + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevnat for billing indicator as F
Step 4)
The schedule line cateogry for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requision order immediately after the creation of the sales order and the PO to vendor is created against this purchase requiesion.
thanks
G. Lakshmipathi

Connection steps for SAP BW and R/3

Hi Every Body,
Can you please explain me detail about the connectivity between R/3 and BW.
General steps which am aware is as follws;-
SAP R/3 steps to be performed
1. Define Logical system---->(e.g ABC100)
2. Assign client to logical system -->(100)
3. Define RFC Destination.(Here I assume I have to give Destination user name and password should be the user which have SAP_ALL authorization) Am I right.
SAP BW Steps:-
4. Define Logical system---->(e.g ABC100)
5. Assign client to logical system -->(100)
6. Define RFC Destination.(Here I assume I have to give Destination user name and password should be the user which have SAP_ALL authorization) Am I right.
Then in BW Environment in RSA1->Source Systems->right click and choose Create
There are two options available for R/3 system one is Manual and one is Automatic.
For Manual creation we give RFC Destination should be BW system and Logical system should be R/3 and Source system name is xyz.
Is there any other steps am missing.What about the inbound and outbound Idoc Parameters.
I feel this will help while transferring data to BW.am I right.
Please clearly explain the steps for R/3 and BW connectivity.
Regards,
VJ

Hi,
For Manual creation we give RFC Destination should be BW system and Logical system should be R/3 and Source system name is xyz.
RFC Destination should be R/3 system. NOT BW system.
should i make connection with only R/3 200(Data Client) to BW
Yes you have to connect to 200 only. Not to 100.Other wise you will not get data from R/3 to BW.
What is the Use of Transport Button in RSA6.Post Processing data sources.
It will be used to create Trasnport requests on DS .
Suppose if i activate data source from Customizing client(100)and click on Transport button in RSA6 if there is connection with this client to BW. What is the Impact.
It will not give any impact on BW. Actually it ask you to create a Transport requset by Prompting the message box. After click on create button and entering the description, it will create a transport request.
Clearly explain me in detail what happen when i choose Transport Button in RSA6 for BC data sources.
It is must and should process. Because you will not activate(using of RSA5) the DS in quality R/3 system. So to use this DS in QA system, you will import the Transport request creatd in DEV r/3.
In your case, you will use client 100 for activating the DS and creating Transport reuests. And then these DS are automatically available in client 200, because DS are Client independent.
With rgds,
Anil Kumar Sharma .P

Hi i need material for module pool and alv's.

hi
i need material for module pool and ALV's(not object oriented) if any one have pls do send that to my
ID [email protected]
thanx in advance.

Hi
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
ALV
ABAP List Viewer
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Reward points if useful
Regards
Anji

What are the config steps for contract hierarchies and vendor hierarchies?

Hi friends
what are the config steps for contract hierarchies and vendor hierarchies?
Regards
Raj Kumar

Contract hierarchies
A function that enables users authorized to create a purchasing contract to define relationships between super- and subordinate contracts.
A contract hierarchy consists of one or multiple contracts and is subject to the following rules:
The top node of the hierarchy cannot have a superordinate contract
Every contract except for the top node has exactly one superordinate contract
Every contract can have none, one, or multiple subordinate contract(s)
A contract can be part of no hierarchy or exactly one hierarchy
Note:Contract hierarchies are only available for purchasing contracts. They are not available for global outline agreements.
You can activate this from SRM Server> Cross application settings>Activate Hierarchies for Product Categories, Vendors, and Contracts.
Note:
These hierarchy functions should not be reset once they have been activated.
Similiarly you can do this for Vendor Hirerachies.
Please visit link for more details: http://help.sap.com/saphelp_srm50/helpdata/en/43/2022b83fbc2be8e10000000a11466f/content.htm
Thanks

Required step by step co-pa screenshots and configuration material

hi copa experts
can u pls send the step by step co-pa screenshots and configuration material
regards
venkataswamy
bathini dot venkataswamy attherateof gmail.com

hi
The below link may be helpful to u
COPA documentation
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPA/COPA.pdf
nagesh

Can I uninstall Extension Manager CC, or do I need ot for CC Photoshop and Lightroom?

Can I uninstall Extension Manager CC, or do I need ot for CC Photoshop and Lightroom?

Thank you, "Staff" (NOT YOU CARL SUN). But you (STAFF) have not answered my original query.
Here is an explanation of my original question.
I want to uninstall Extension Manager from my CC2014 App Menu. Is this a mistake? Or should i not do this because I need it for my CC2014 Program, i.e , Photoshop CC 2014 NS and Lightroom cc 2014 alone. I have nothing else. I want nothing else.

Needed steps for installing oracle 10R2 on windows server 2003

Hi to All,
Can anybody give me steps for how to install oracle 10R2 on windows 2003 server in production environment and what is the preinstallation task and postinstallation task.
Thanks and Regards
Mohd Khaja

There is one pre-requisite that is missing from the documentation - ensuring that the administration team is adequately trained.
Since you are asking this question, I wonder whether your team is properly prepared for, and aware of, the possible nuances or changes from default that might be relevant to your environment.
For example, is your team familiar with the concept of Flashback Recovery Area and how it may fit, or conflict with, your production needs? Use of RMAN? Location of Oracle software Inventory and implications in your OS-level backup? How to configure both the software and the database to meet your Service Level Agreement requirements.
The referenced document is an excellent first step, as it asks some of the questions. If you are serious about production stability, you want to go through that as well as get appropriate level of expertise in your shop.

Need steps for lead distributation

i need to know the steps for LEAD distributions
cold lead to go in BW system
warm lead to sales manager's inbox
hot lead to convert into opportunity.
karan

Hello Sharma,
Hot leads can triger an action to create a follow up transaction...
Regards
Michalis Tamiolakis

Need steps for report bursting in BOXI3.1

HI All,
Can someone please tell me the steps for report bursting in BOXI3.1
Thanks
Sudharsan.

Hi
please take a look at this document:
[http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_publisher_en.pdf]
It describes the usage of publications, which implement report bursting in BOBJ XI 3.1.
Regards,
Stratos

Need steps for JDK to JRockit

Hi All,
Currently we are using JDK1.7.0.21 for weblogic 10.3.6 , SOA 11.1.1.6 and AIA in Production(Linux64bit). new i want migrat to Oracle JRockitJDK.can any body sent some steps for that and some documents plz..
Thank you,
Ram.

There is a small example here: Middleware Snippets: WebLogic, Coherence and the G1 Collector
Note that this goes the other way around, from JRockit to Oracle JDK. In your case you can set the JAVA_VENDOR to Oracle (instead of Sun) and enter the BEA_JAVA_HOME value.
There is something like the following in the setDomainEnv file (located in the ${DOMAIN_HOME}/bin directory):
WL_HOME="/home/weblogic/weblogic12.1.1/installation/wlserver_12.1"
export WL_HOME
BEA_JAVA_HOME="/home/weblogic/jrockit-jdk1.6.0_29-R28.2.2-4.1.0"
export BEA_JAVA_HOME
SUN_JAVA_HOME="/home/weblogic/jdk1.7.0_11"
export SUN_JAVA_HOME
JAVA_VENDOR="Sun"
export JAVA_VENDOR
if [ "${JAVA_VENDOR}" = "Oracle" ] ; then
JAVA_HOME="${BEA_JAVA_HOME}"
export JAVA_HOME
else
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
JAVA_HOME="${SUN_JAVA_HOME}"
export JAVA_HOME
else
JAVA_VENDOR="Oracle"
export JAVA_VENDOR
JAVA_HOME="/home/weblogic/jrockit-jdk1.6.0_29-R28.2.2-4.1.0"
export JAVA_HOME
fi
fi
By changing the JAVA_VENDOR to the right one, you can see the in the 'if' statement JAVA_HOME is set by using either SUN_JAVA_HOME or BEA_JAVA_HOME
The nodemanager.properties also has properties where JAVA_HOME is set (javaHome and JavaHome).

ECM 11.1.1.5.0 - need steps for SSO integration and configuration

Similar Messages

Maybe you are looking for