Need suggesion to implement oss note

i need to impliment oss note 1162372
i went to snote transaction and downloaded the note
the doccumentation its saying that
'' Solution
The changes take effect after you have imported the Support Package.
If you want to perform the changes without importing the Support Package,
use the "Upload" function in the application toolbar of
transaction SU24 and import the attachment
'SU22DATA.TXT'.
See also the "Standard Procedure for Customers" section in Note 368496. ''
i went to transaction SU24 and clicked on upload buttion,, but unable to import the 'SU22DATA.TXT'.
how can i get this ?
can any body suggest

hi
download the attachment from snote 'SU22DATA.TXT' into desktop. then try su24.
reg
Ramya

Similar Messages

AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE

Hi Experts...
Requirement: AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE HISTORY?
I have seen many threads about implementing OSS NOTES 390635, but hardly any one narrated the process in detail as to how to see 'Change History'..
I just would like to know 'how' and 'from where' to find Order Change History in detail (i.e Prod .order Comp. change history, Prod. Ord. Operation Change History, Prod. order header change history etc..)
In general this isssue might sound old one..but 'POST IMPLEMENTING OSS NOTE 390635' is rare one.
Folks need your expert comments and valuable suggestions....
Thank You...
Lucky

Dear
You should goto CO02-Enter Production Order -Goto -Change Management -Here it will list down all the chages with relevent information .
Refer : Re: Production order changes history
Production orders
Regards
JH

How many ways r there to implement Oss note

how many ways r there to implement Oss note and please explain all...

I count three.
SNOTE is the first, which applies the note without needing to manually apply the code.
Some notes can't be applied in SNOTE (the changes needed cannot be applied automatically by the system), so these are applied manually, following the instructoins in the note.
A third way is to apply a support pack, which is essentially made up of a large number of notes.
Regards,
Nick

How to implement OSS notes : 207260

Hi All,
Can anybody please let me know how to impement oss note : 207260.
I need to implement Note : 207260 which is settlement rule for incorrect last used period.In this note its saying to run ZMIGCOBR to repair incorrect settlement rule for incorrect objects. But in this notes its not given any such program.
Please let me know how to implement OSS notes since i never done this before.
Thanks in advance.
Regards,
Vishal

Check the below point:
SAP R/3 Document : Using Transaction SNOTE
Implementing OSS Notes Using the new Transaction Code SNOTE
In this document we will see how to implement an OSS note using the SNOTE
transaction code.
The transaction code SNOTE is used to implement OSS Notes. With the SNOTE
transaction, it is no longer necessary to register ABAP objects such as report function
modules etc. manually. But data dictionary objects such as screens, tables need to
be modified manually by registering them in OSS system.
In order to use the transaction code SNOTE, the relevant transport which implement
this transaction in the system need to be transported. Please refer to the SNOTE
guide available at http://service.sap.com
Execute the Transaction code SNOTE
One of the first steps to do is to upload the note into your system.
Follow Goto à SAP Note Download
You can also use the SAP Note upload if the note has been saved in your local
machine
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
In the following box that you get, enter the note number. We will take Note 388732
as an example
and click on the Execute icon. You will get the note number displayed in the list of the
OSS notes
In the above screen, we have two notes listed.
By double clicking on or on the note number you can display the OSS note.
You can also check the Status of the note by clicking on the Check SAP Note icon
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
Select the note and click on Check SAP Note icon. In this case we have selected
note number 388732.
If the note is not implemented as part of some support pack as per the support pack
level of your system, you should get the following pop up box.
Select the note number that you want to implement and goto Edit à Select/deselect
node
To implement the OSS note click on the Implement OSS Note icon
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
You will get a confirmation box like the following
Click on Yes
Click on the Continue icon
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
You will be prompted to enter a change request number.
Click on the Create Request icon
Enter a brief description of for the note and click on the continue icon
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
A change Request number is created for the change that you are making
Click on the continue icon
The system will display the objects that are going to be modified during the process
of note application.
In our case, Report LTXW0F10 and RTXWCHK1 are going to be modified.
Click on the Continue icon
For while the system will show the note in IN PROCESS status
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
After a while, select the note and click on the Check SAP Note icon on the application
toolbar
But still the Status of the note is displayed under In Process category.
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
You can also check the status of the note by checking the meaning of the icon next
to the note number.
To check the legend, follow Utilities à Color Legend
As you can see from the legends box, means Implemented Correctly.
Since the note is implemented, you can change the status of the note from In
Process to Completed manually.
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
Select the note and click on the Set Processing Status icon
In the Pop up box that you get, select the Completed radio button
And click on the Continue icon
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
The note number is removed from the list
ü You can also check the logs of the activities performed during the OSS note
implementation by clicking on the Logs icon on the application toolbar. The log
information will contain all the steps that were performed from the point of
downloading the note will its implementation is completed.
ü If there are any pre-requisite notes for the note that is being applied, the
system will prompt you to load those notes too into the system. Depending on
their applicability to your system, the system will prompt you accordingly to
apply the pre-requisite notes.
ü You can register the manually implemented SAP notes by executing the report
SCWN_REGISTER_NOTES.
ü SNOTE cannot change or modify data dictionary objects. If there is a note
which requires changes to be made to a structure or a screen then SNOTE will
not help. Such objects have to be registered and modified manually.
http://www.sappoint.com/basis/snote.pdf
Regards,
Prakash.

Problem while implementing OSS note(1157904)

HI,
I am facing a problem while implementing OSS note 1157904.I am getting a message "no valid correction instruction".
I checked support pack levels .I checked source code also, it is not implemented.
Regards,
Pratap.

You need to get back to SAP. Sometimes notes have incorrect information in them.

Badi implementation error after implementing oss note 745168

Hi All,
i implemented oss note 745168 to fix badi ME_PROCESS_REQ_CUST by doing step 1 & 2 manually..
during the implementation of step 3, there was error but we just proceeded..now my whole badi consists error and can't be activated but the definition works just fine..
can anybody pls help

Hello Babita,
For which version are u applying this note?? Is it for 4.7??
I checked the note and for r/3 release 4.7 there are two correction instructions.
Implement them in the following order
1. Correction instruction 434275
2. Correction instruction 434276
Please make sure you have implemented both corrections.
In code comparison editor you can check the code difference by clicking the "next code difference" tab in toolbar. It will tell you which code changes are missing.(You can see the required code changes just by clicking the correction instructions 434275 and 434276).
Hope this will helpful.
Regards,
Bhavana

Need the content in oss note 473658 for implementing the program

Hi Friends
I am assigned a issue regrading OSS notes,i like know about the note 473658 and contents in that note.
Please help me regarding this.
Thanks & Regards,
Kamireddy

Hi Avinash,
This is the problem.
Note 1058804 - RAPOST2000/RAPOST2001: Problems with document
handling
Thanks,
Kamireddy

How to find out the list of implemented OSS Notes in a particular period.

Hi Friends,
Need help.
I need to find out the list of OSS Notes implemented in a period in a particular system.
Could you please suggest the table or program or any way to find out the OSS Notes Implemented date wise?
Thanks in Advance.
Sreenivas

Hi Sreenivas.
How did you find the solution to this? Trying to do the same thing!
Cheers,
Tom

Problem while implementing OSS note 1077403

Hi,
I am trying to implement a OSS note ( 1077403) using SNOTE transaction. When I download the note, the status of this note is u201CCan be implementedu201D. It creates few standard programs which are utility programs related to Unicode conversion. While implementing this note, I am facing the issue "Objects can only be created in SAP package" and some of the objects in the note are not created. The note status becomes u2018Incompletely Implementedu2019.
Can you please suggest what could be the issue?

HI,
For more efficence direct link to note Note 1077403 - Cluster table check using SDBI_CLUSTER_CHECK
Have you a basis release version >= 6.20 ?
you can use transaction SNOTE to implement the version for Basis Release 6.20 and higher.
Rgds
Edited by: stéphane mouraux on Mar 1, 2010 6:31 PM

LIS Extract structure MC17I00ACT changed while implementing oss note 865254

Hi,
While i am trying to implement the oss notes 865254 , the sap defined data source 2LIS_17_I0ACTY , having the extracture MC17I00ACT , extract structure is modified and many fields and includes are deleted .can any one please give soluation how to restore the original extract structure.its very urgent. please help me.
thanks,
sri.c

Hi,
it might be possible to get it back from the version management. I didn't do that, but you can try. Goto se11->Tools->Versions
regards
Siggi
PS: Be careful and check the versions before.
Message was edited by: Siegfried Szameitat

Implementing OSS Note with /SAP/ and /DEVPROG/ - Note 1117955

I am trying to post OSS Note 1117955 which contains a Z* module from SAP as well as multiple changes to SAP modules. This is asking me for a transport for the Z module using /DEVPROG/, but then the SAP module changes are asking for a /SAP/ transport. The Note seems locked on the 1st transport and will not allow me to create a 2nd transport for the SAP program pieces. Anyone run into this before?

Usually when you do a modification to standard code (which a note application basically is) it puts it under a task of type 'Repair'.
Whereas when you change Z-objects they will be put under a task of type 'Development/Correction'
Try the following:
Create a transport that you will use for the note application which contains two tasks: one for repair and one for development/corrections and try to apply the note again by linking it to your new transport.
- SE10
- Create
- Select Workbench
- Confirm
- put in a description
- confirm
- put the cursor on the request
- click on the add user button
- choose your own user name
- confirm (this will add a second task to your transport request)
- click on the first task
- menu request/task - change type
- Choose Repair
- Do the same for the second task and choose development
Hope that helps,
Michael

Issue while implementing OSS note

Hi Experts,
While Implementing the note 100690 in sap , I am facing the following issue.
The traffic signal light is red and the message text shows as follows:
Object REPS ZKOGLMNG doesn't exist, create it
Object REPS ZKOMENGE doesn't exist, create it
Object REPS ZKORWEM2 doesn't exist, create it
Object REPS ZKORWEM3 doesn't exist, create it
Object REPS ZKORWEM4 doesn't exist, create it
Could you guys help me out in resolving this issue ASAP .
Thanks in Advance
Regards
Sandy

Hi Juan ,
Thanks for the mail,
I had a small doubt over here,
can I follow this procedure:
1). I will ask my ABAP team to create those mentioned objects manually.
2). Then I will implement the SNOTE , so that the corrections will be inserted into those objects.
I do understand your point earlier that to manually apply the corrections (In this case both step1 & 2 will be done by ABAPer's).
Please let me know if above procedure works .
Thanks&Regards
Sandeep

This is related to Idoc where in I shld implement OSS note very urgent!!!

Hello Guru's,
The issue what I got is mentioned below..
During picking of a material that is subject to batch management using a WM transfer order, no other split items are created despite existing batch split items.
As a result, problems can occur during verification from a decentralized WMS with the IDoc SHP_OBDLV_CONFIRM_DECENTRAL (see also note 793754).
The error typically occurs if there are only batch split items with a quantity 0 for the item. This type of scenario may occur if the item has already been fully picked, a batch split created during acknowledgement and the split items then no longer contain a delivery quantity due to a return transfer.
When a new transfer order is acknowledged, the system does not recognize that split items are already available. As a result, the main item is mistakenly updated.
According to the Note 794017, the reason for this is a program error and the solution is to implement the source code corrections specified in said note corrections.
so for this issue I need OSS login id..that any how I will get it from my collegues, but here the problem is how to approach to this issue.It will be really appreciated if U help me out in solving the issue and please explain me step by step process as this is the first case I am handling..
awaiting for U r replies...and U can send the info to my mail id...
Regards,
Ravi V Ganji

Hi
Please check these links
<b>http://www.sapdevelopment.co.uk/tips/tips_snote.htm</b>
http://help.sap.com/saphelp_nw04/helpdata/en/60/8def3981fe5d7de10000000a114084/content.htm
http://www.sap.info/index.php4?ACTION=noframe&url=http://www.sap.info/public/INT/int/index/PrintEdition-78313c678e214d4cd-int/-1/comvArticleContainer-198983c63c6457e938
Besides these if you get your OSS id, there are several tutorials in the service marketplace
Message was edited by: Dominic Pappaly

Need help in implementing a note

Gurus ,
i need your help in implemnting the SAP NOTE
"873422 - Error when sending an e-mail"
I am not suer how to proceed to implement the correction speified in that note .
it would be of great help if any body can explain me in brief to implement atleast one correction in that note

Hi Susin,
The first thing for Note 873422,
"You have created e-mails from Audit Management. The system automatically attaches a link to the display of the audit object being sent. When you send an e-mail via SAPconnect, the following error occurs: XS 829 Internal error: SO_OBJECT_MIME_GET Exception: 2."
Are you getting this symptom in your system? and you want to apply the correction??
After applying the correction, if the prerequisite mentioned in note 530932 is not met during sending mail.. then
simply the link will not be attached. but mail will be sent.
you have to apply the correction of the note using SNOTE or manually apply note by download/upload.
For how to apply a note using SNOTE you can follow the help guide
http://help.sap.com/saphelp_nw70/helpdata/EN/b8/3cf839fd35384de10000000a11402f/frameset.htm
Regards,
Debasis.

Help needed applying OSS note 981295 in SAP ECC 5.0 with SAP Kernel 640_REL

Hi Experts,
Our functional team is trying to implement a kind of workflow through a notification via SAP Inbox (transaction code SBWP) after the release of a Purchase Order (Transaction code ME29), this is every time when a purchase order is released through transaction code ME29, a notification will be sent to the SAP Inbox (transaction code SBWP). So according to this they told me to implement OSS note 981295, but using transaction SNOTE I get the message that this note can't be implemented in my system this because my SAP Kernel version is the release 6.40 and the needed SAP Kernel for this note is from version 7.00 to version 7.10. So what do you recommend please in this case in order to implement the required functionality on our SAP ECC 5.0 System?
Best Regards,
Erik Espinosa

Note clearly states
This note is only relevant if the following Support Package is installed in the system:
NW04s: Support Package SAPKB70008
Meaning is not relevat to your case. You need to keep looking... if you open an OSS message people from SAP might put you in the right direction.
Regards
Juan

Need suggesion to implement oss note

Similar Messages

Maybe you are looking for