Need suggestion on how to implement UNIX SSH connector for various server

Hi everyone,
We have various unix servers like ubantu, redhat and mandrake . each unix type have serveral machines around 50+ each.
I want to have one resource object for each server type
ex: ubantu, redhat, mandrake.
User will select on the server type and this will bring all itresources under this type.
Also when we install the connector it gives us one schedule task for group and user reconciliation. If i plan to have one RO for each of the server type what should I do to have one schedule task for each server type
How difficult it would be to implement this? any guidance on how to proceed with this?
Thanks,
asat

Hope that this could help you.
Managing 100s of Unix Servers using OIM.
-INIYA

Similar Messages

Need suggestion on how to do 3D spinning title animation

Hello all experts,
I need suggestion on how to do 3D rotating title animation. Let me explain what i wanted to do.
The end product is the word WELCOME.
But I want to animate it in such a way that the alphabelt W first appear as nothing from inside the screen to appear in the screen (that means zoom from small to big, is it called zoom out ?). In the process of zooming out, I want the W to have a thickness & it spins very fast along the horizontal X-axis and stops at the screen with the alphbelt W.
Then the whole process repeat with E, and I have WE. It then repeats with L and I have WEL. This whole thing repeats until it forms the word WELCOME.
Any suggestions ? Is there an inbuilt preset for this ?
If not, if I do from scratch, do I need a separate track for each alphabelt ?
Thank you very much.
Cheers.

Nick Holmes wrote:
You would have to build this one from scratch, but it's pretty easy.
Work on the whole word first to get the basic movement, then play with the Timing settings in the Inspector. To have the letters do this one after the other use the Sequence setting. Typically you would set it to the number of letters in your word plus 1 -so your welcome should have a Sequence value of 8. You can of course set it to whatever you think looks best.
Give it a go and let us know how you get on. Don't forget to save your new effect!
Thanks Holmes but where do I find the Sequence settings ?
Thanks

How to Implement N-Level Approval for Bid,Live Auction,PO,Contract ?

Hi Experts,
I am new to SRM 5.0. My requirement is how to implement N-Level Approval for Bid, Auction, PO and Contract? Which steps should I follow for N-Level Approval? Can any one send me sample code and name of BADI where I have to implement the code.
Abhijeet Panse

Hi
Please check for <b>BBP_WFL_APPROV_BADI</b> using SE18 transaction for relevant Code as well and standard SAP documentation.
Related sample code and other useful pointers ->
WS14500015 is not working for Multilevel approval
Re: SRM / Shipping cart
Re: N Step Approval BADI - BBP_WFL_APPROV_BADI
Re: N-step BADI workflow
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/content.htm
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/17/40a86c773d6c41801d78af1a34b90f/frameset.htm
Multiple Implementation For BBP_WFL_APPROV_BADI
Re: Help needed on N-Step Approval WFL for SC
Re: N-Step 14000109 workflow - Unable to identify Approvers
Do let me know.
Regards
- Atul

UNIX SSH Connector re-deploy help

Hi all,
Somebody else installed UNIX SSH connector 9.0.4.11 and I am not sure that was installed properly as I saw only 2 two scheduled tasks and I think there should be 3. The Trusted Recon task is missing. Can any body please let me know on how to check if the installation was done properly and if it was not done properly who can I make things work. Thanks
Edited by: user13015045 on Dec 24, 2010 9:25 AM

Hi
I hope there should be a separate XML for trusted recon which you have to import using deployment manager manually. Once you import that you can see the trusted scheduled task.
The XML should ideally be present in the xml folder of the connector installation media.
Regards
user12841694

How to Implement the Search page for Workflow Notifications?

Hi All,
I want to implement the new Search page for Workflow Notifications. Search page containing Company, Paygroup, Source, Initiator, Supplier Name, From date & To date fields. These fields(Poplist & Calendar) are getting the values from different tables and these fields are not in WF_NOTIFICATIONS table only Initiator & dates are there. After selecting the values in all fields or one field based upon these values I want to display the all Workflow Notifications ( Those are satisfy the search criteria only not all ) in Advance Worklist Table RN in the Notifications page. Is it possible to create the Search page based upon the above scenario if Yes Let me know how to implement this search page for Workflow. Page was designed but how to get the sortlisted Notifications and how to pass these values to next page?
Thanks in advance.
Edited by: user635152 on Nov 13, 2008 10:53 AM

Hi Guru,
I crete the Search page having 5 poplists and select the values from dropdown list and click GO button it serch the records and displays that records in ResultsTable in same page.
My case, Search page is running fine if I select the values and click GO button page is refreshed without errors but I am unable to displays the records in ResultsTable.
What I am missing?
My Select Stmt:
SELECT * FROM
(select wn.nid notification_id
,ou.name company
          ,I.PAY_GROUP_LOOKUP_CODE paygroup
          ,'AP' source
          ,pf.full_name initiator
          ,pv.vendor_name supplier_name
          ,I.GL_DATE FROM_TO_DATE
from ap_invoices_all i
, po_vendors pv
     , hr_operating_units ou
     , per_all_people_f pf
     , FND_USER FU
, (SELECT trim(substr(substr(substr(WN.subject,(instr(WN.subject,'Invoice ') + 8),100),1,100),
1,instr(substr(substr(WN.subject,(instr(WN.subject,'Invoice ') + 8),100),1,100),' for'))) inv_no
,notification_id nid
FROM WF_NOTIFICATIONS WN
WHERE WN.MESSAGE_TYPE = 'APINV'
AND WN.STATUS NOT IN ('CANCELED','CLOSED')) wn
where i.vendor_id = pv.vendor_id
and i.invoice_num = wn.inv_no
and i.WFAPPROVAL_STATUS = 'REQUIRED'
and pv.vendor_name = nvl(:vendor_name,pv.vendor_name)
and i.org_id = OU.organization_id
AND OU.name like nvl(:company_name,name)
and i.pay_group_lookup_code = nvl(:pay_group,i.pay_group_lookup_code)
and exists (select ad.invoice_id
from ap_invoice_distributions_all ad
where ad.invoice_id = i.invoice_id
and ad.accounting_date between nvl(:from_date,ad.accounting_date)
                                   and nvl(:to_date,ad.accounting_date))
and 'AP' = nvl(:source,'AP')
     and i.created_by = fu.user_id
     AND fu.EMPLOYEE_ID = pf.person_id
     AND pf.full_name like nvl(:initiator, pf.full_name)
UNION ALL
          select po_num.nid notification_id
          ,ou.name company
          ,ps.PAY_GROUP_LOOKUP_CODE paygroup
          ,'PO' source
          ,pf.full_name initiator
          ,pv.vendor_name supplier_name
          ,P.CREATION_DATE FROM_TO_DATE
     from po_headers_all p
     ,po_vendors pv
          ,po_vendor_sites_all ps
          ,hr_operating_units ou
          ,per_all_people_f pf
     ,(select trim(substr(wn.subject,24,instr(wn.subject,' for')-24)) po_no, notification_id nid
          FROM WF_NOTIFICATIONS WN
     WHERE WN.MESSAGE_TYPE = 'POAPPRV'
     AND WN.STATUS NOT IN ('CANCELED','CLOSED')
     and wn.subject like 'Standard Purchase Order%') po_num
     where p.SEGMENT1 = po_num.po_no
     and p.vendor_id = pv.vendor_id
     and p.org_id in(select organization_id
     from hr_operating_units
     where name like nvl(:company_name,name))
     and pv.vendor_name = nvl(:vendor_name,pv.vendor_name)
     and p.AUTHORIZATION_STATUS = 'IN PROCESS'
     and p.CANCEL_FLAG = 'N'
     and 'PO' = nvl(:source,'PO')
     and p.agent_id = pf.person_id
     and pf.full_name like nvl(:initiator, pf.full_name)
     and pv.vendor_id = ps.vendor_id
     and ps.org_id = ou.organization_id
     and ou.name like nvl(:company_name,name)
and ps.PAY_GROUP_LOOKUP_CODE = nvl(:pay_group,ps.PAY_GROUP_LOOKUP_CODE)
     and trunc(p.creation_date) between nvl(:from_date,trunc(p.creation_date)) and nvl(:to_date,trunc(p.creation_date))
In CO PFR Code:
if (pageContext.getParameter("Go") != null)
OAQueryUtils.checkSelectiveSearchCriteria(pageContext, webBean);
     String COMPANY = pageContext.getParameter("COMPANY");
String PAYGROUP = pageContext.getParameter("PAYGROUP");
String SOURCE = pageContext.getParameter("SOURCE");
String INITIATOR = pageContext.getParameter("INITIATOR");
String SUPPLIER_NAME = pageContext.getParameter("SUPPLIER_NAME");
Boolean executeQuery = BooleanUtils.getBoolean(false);
Serializable[] parameters = { COMPANY, PAYGROUP, SOURCE, INITIATOR, SUPPLIER_NAME, executeQuery};
Class[] paramTypes = { String.class, String.class, String.class, String.class, String.class, Boolean.class };
am.invokeMethod("initSearch", parameters, paramTypes);
OAAdvancedTableBean table = (OAAdvancedTableBean)webBean.findChildRecursive("ResultsTable");
table.queryData(pageContext, false);
AM invoke Method():
public void initSearch(String company,
String paygroup,
String source,
String initiator,
String supplier_name,
Boolean executeQuery)
WorklistFindVOImpl vo = getWorklistFindVO1();
if (vo == null)
MessageToken[] tokens = { new MessageToken("OBJECT_NAME", "WorklistFindVO1") };
throw new OAException("AK", "FWK_TBX_OBJECT_NOT_FOUND", tokens);
vo.initQuery(company, paygroup, source, initiator, supplier_name, executeQuery);
VO Code:
public void initQuery(String company,
String paygroup,
String source,
String initiator,
String supplier_name,
Boolean executeQuery)
StringBuffer whereClause = new StringBuffer(500);
Vector parameters = new Vector(5);
int clauseCount = 0;
int bindCount = 0;
setWhereClauseParams(null); // Always reset
if ((company != null))
String companyname = null;
try
companyname = new String(company);
catch(Exception e) {}
whereClause.append("COMPANY= :COMPANY");
whereClause.append(++bindCount);
parameters.addElement(company);
clauseCount++;
if ((paygroup != null) && (!("".equals(paygroup))))
if (clauseCount > 0)
whereClause.append(" AND ");
whereClause.append("PAYGROUP = :PAYGROUP");
whereClause.append(++bindCount);
parameters.addElement(paygroup);
clauseCount++;
if ((source != null) && (!("".equals(source))))
if (clauseCount > 0)
whereClause.append(" AND ");
whereClause.append("SOURCE = :SOURCE");
whereClause.append(++bindCount);
parameters.addElement(source);
clauseCount++;
if ((initiator != null) && (!("".equals(initiator))))
if (clauseCount > 0)
whereClause.append(" AND ");
whereClause.append("INITIATOR = :INITIATOR");
whereClause.append(++bindCount);
parameters.addElement(initiator);
clauseCount++;
if ((supplier_name != null) && (!("".equals(supplier_name))))
if (clauseCount > 0)
whereClause.append(" AND ");
whereClause.append("SUPPLIER_NAME = :SUPPLIER_NAME");
whereClause.append(++bindCount);
parameters.addElement(supplier_name);
clauseCount++;
setWhereClause(whereClause.toString());
if (bindCount > 0)
Object[] params = new Object[bindCount];
parameters.copyInto(params);
setWhereClauseParams(params);
if ((executeQuery != null) && (executeQuery.booleanValue()))
executeQuery();
} // end initQuery()
Please let me know what I did mistake in my code?
I am unable to find it what I missing and there is no errors but no records displayed in Results Table.
Please it's urgent.
Thanks
Nag.
Edited by: user635152 on Nov 19, 2008 4:43 PM

I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod?

I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod? More specifically special education apps.
Thanks

Keep in mind as well that not all apps are "created equal". Some are really good, and others are not very good. You might also want to look at some education sites for recommendations. An example of a general iPads in education forum is
http://ipadeducators.ning.com/
but I imagine some exist for special education needs as well. Our healthcare organization is using some apps for working with autistic children and find them very helpful.

How may implementations can we have for a BaDI?

How may implementations can we have for a BaDI?

if BADI check Multi-USE , then u can
Multiple-Use Business Add-Ins
You can differentiate between single-use and multiple use Business Add-Ins. The distinction is based on the procedure or event character of an enhancement. In the first case, the program waits for the enhancement to return something, usually a return code. A typical example could be a benefit calculation in HR. Depending on the implementation, alternative calculations can be executed. With multiple use add-ins, an event that may be of interest to other components is processed in program flow. Any number of components could use this event as a hook to hang their own additional actions on to.
In addition to importing parameters, you can also use changing parameters for multiple-use Business Add-Ins. There is no sequence control for multiple-use implementations of BadIs. Therefore, using changing parameters can cause problems. There is no guarantee that implementations will not overwrite the results of previous implementations. Sequence control is technically impossible, since at the time of the definition the interface does not know which implementations there will be and which parameters will be changed by implementations. It is not possible to have a decision as to which implementation should be executed before which other (future) implementation.
Example:
In a particular application, you want to be able to continue processing indexes after another component has saved data (in other words, the system should allow you to use an add-in after saving). Since this point in time can be useful for different purposes, you can create an enhancement here that can be used by multiple subscribers.
To create a multiple-use Business Add-In, proceed as follows:
       1.      Define an add-in and select the Multiple Use checkbox from the Administration tab.
       2.      Define an interface with the method OBJECT_SAVED'and the importing parameter OBJECTNAME.
Calling your enhancement in the application program:
program event.
data exit_obj type ref to if_ex_event.
call method cl_exithandler =>get_instance
     changing instance = exit.
form save_object using obj_name type c.
update
call method exit_obj->object_saved
     exporting objectname = obj_name.
endform.
For the caller it is irrelevant whether (and how many) subscribers use the event as a starting point for further actions. The active implementations are called in the adapter method.
more in http://help.sap.com/saphelp_nw04/helpdata/en/ee/a1d548892b11d295d60000e82de14a/content.htm
Regards
Prabhu

HOW TO USE A SINGLE PERFORM FOR VARIOUS TABLES ?

perform test TABLES t_header.
select
       KONH~KNUMH
       konh~datab
       konh~datbi
       konp~kbetr
       konp~konwa
       konp~kpein
       konp~kmein
       KONP~KRECH
       FROM konh INNER JOIN konp
              ON konpknumh = konhknumh
       into table iTABXXX
        "ANY TEMPERARY INTERNAL TABLE.
       for all entries in t_header
       where
             konh~kschl = t_header-kschl
         AND konh~knumh = t_header-knumh.
endform.
how can I use above perform for various internal tables of DIFFERENT LINE TYPES but having the fields KSCHL & KNUMH.

u can use single perform....
just see this example......hope this is what u r expecting....
tables : pa0001.
parameters : p_pernr like pa0001-pernr.
data : itab1 like pa0001 occurs 0 with header line.
data : itab2 like pa0002 occurs 0 with header line.
perform get_data tables itab1 itab2.
if not itab1[] is initial.
loop at itab1.
write :/ itab1-pernr.
endloop.
endif.
if not itab2[] is initial.
loop at itab2.
write :/ itab2-pernr.
endloop.
endif.
*&      Form get_data
      text
     -->P_ITAB1 text
     -->P_ITAB2 text
form get_data tables   itab1 structure pa0001
                        itab2 structure pa0002.
select * from pa0001 into table itab1 where pernr = p_pernr and begda le sy-datum and endda ge sy-datum.
select * from pa0002 into table itab2 where pernr = p_pernr and begda le sy-datum and endda ge sy-datum.
endform.                    " get_data
Regards
vasu

How to create user defined metrics for SQL Server target?

The customer is not able to create a user defined metrics for SQL Server target.
This is very important for him to use this product.
He is asking how to create user defined metrics?
I sent him Note 304952.1 How to Create a User-Defined SQL Metric in EM 10g Grid Control
But it would work for an Oracle DB, but his target is SQL Server DB
Not able to find the "User-Defined Metrics" link from Database home page.
How to create user defined metrics for SQL Server target?

http://download-uk.oracle.com/docs/cd/B14099_19/manage.1012/b16241/Monitoring.htm

How to implement expand/collapse property for custome components

can any one tell me how to implement the expand/collapse
property for the custom components in flex. i need something like
hierarchy of custom components which on the expand should be able
to show the children of the corresponding component and a line
linking between them and collapsing property too.. can any one help
me out..

"hanu106" <[email protected]> wrote in
message
news:gfr2co$biq$[email protected]..
> can any one tell me how to implement the expand/collapse
property for the
> custom components in flex. i need something like
hierarchy of custom
> components
> which on the expand should be able to show the children
of the
> corresponding
> component and a line linking between them and collapsing
property too..
> can any
> one help me out..
Tree?
AdvancedDataGrid?
Nested Acordions

How to Implement Dynamic Modification Rule for Material & multiple vendor Combination

Hi Team,
In dynamic modification rule for Material & vendor combination, i have maintained material & vendor in Inspection plan at Material Assignments
1.If i purchase same material from different vendors then how to implement ?

Hi Balaji,
I am not sure if i have followed your requirement.
What do you want to do with Vendor Z? Do you want to inspect each lot from Z?
If yes:
Then Create 2 Inspection plans with same Operations and Same MICs, In Material Assignment, mention Vendor as Z so that 1st inspection plan will only be for Vendor Z. Do not enter DMR in Header.
In 2nd inspection plan Enter DMR and do not mention any vendor so this plan will be applicable for all vendors except Z.
If No:
Then create Qm info record for vendor Z with "No inspection" set in QI06.
Amol.

How to implement 'Context Sensitive Help' for Workforce Performance Build Tool.

Hi Gurus,
We have a requirement to implement ‘Context Sensitive Help’ for Workforce Performance Build Tool. Please let me know how to go about implementing the "Context Sensitive Help".
It will be great if you can share some links to the documents and screenshots.
Thanks,
Sanjiv Karmakar

Hi Sanjiv,
do you you mean expand the Help Menu => Pull Help or do you mean
EPSS => push Help?
in case pull help please tell me exactly which system GUI or EP and version you are using.
many different scenarios are possible.
Tom
P.S. Please take care of the name is Workforce Performance Builder or maybe in-official WPB.
many people ask in the HCM area for help, this is the reason why we do not observe all discussion.
The name in the title will help us to find your questions on time.

Need information on how to create Idoc Inbound Interfaces for Business Sys

Hi,
I'm losing it.
Can anyone point me to some documentation or an example of how to create inbound interfaces for Business Systems in PI 7.1.
Here's the scenario
I'm working on a B2B integration process which sends inbound idocs to an ECC 6.0 system.
I've created the Business System communication component but under the Inbound Interfaces it is blank.
I want to have MBGMCR.MGBMCR03 as an inbound interface.
But I forget how to get it there.
For Business components you can just add the inbound interface.
I've already defined the Business System in the SLD pointed it to the correct Tech System, imported the idoc definitions in the Enterprise Service Builder and set up IDX1, IDX2 to ensure the metadata exists in PI.
But for Business systems the hep says that it's got to come from the SLD.
Outbound/Inbound Interfaces
For each business system, the interfaces that are installed on the business system are also entered in the SLD. These interfaces are displayed in this frame. You cannot add any other interfaces.
I know I've done this before, but I can't remember how.
Cheers,
John

Hi John ,
Please have a look at the following links which might be of help to you
PI 7.1 IDocs interfaces act as operations
http://www.sdn.sap.com/irj/scn/weblogs;?blog=/pub/wlg/7933
/people/peter.gutsche/blog/2008/10/27/what146s-new-in-sap-netweaver-pi-71
There is a section in the following link on IDOC , have a look at the links in that section
https://wiki.sdn.sap.com/wiki/display/XI/ImportantBlogsand+Notes
Best Regards

Need document on how to create write back template for 11g

Can anybody provide documentation on how to create write back template for OBIEE 11g?
Thanks

Can anybody provide documentation on how to create write back template for OBIEE 11g?Yes! Oracle does. How about you start by reading it? I will give a hint, it's on the System's Administration guide.

How to configure SCSM exchange connector when exchange server is in different domain.

We installed/configured SCSM in ABC domain and now need to use exchange connector for incident alert mail.
But exchange server is in different domain, say XYZ.
How do we configure?
Thanks,
Abhilash

Cannot configure trust at AD level. But in the config article, following points are given.. but not clear on first 2 steps. Also, we did not find option to "navigate to certificate template and right click certificate templates".
sorry, i dont have much exp with certificates. If steps are described little more clear, would be helpful.
a. If your Service Manager management server does not have a trusted relationship with the Exchange Server, open Certificate Services and create a duplicate copy of the Web Server Certificate Template. Ensure that Private Key Export and Publish
in AD are selected, and then add Read and Enroll permission to Authenticated Users.
b. In Certificate Services, navigate to Certificate Template and right-click Certificate Templates. Click New and then click Certificate Template to Issue. Select the template that you created in the previous step.
c. In Exchange Server, open the Microsoft Management Console and add the Certificates snap-in for the local computer. Right-click the Personal logical store, and then hover over All Tasks.
d. Select Request for New certificate and in the Certificate Enrollment wizard, select Active Directory Enrollment Policy and select the template that you created previously. When you select the certificate, you can click More Information to type
the Exchange Server’s FQDN name as the common name in the Subject tab. You can also type the FQDN name as the Friendly Name in the General tab.
Thanks,
Abhilash

Need suggestion on how to implement UNIX SSH connector for various server

Similar Messages

Maybe you are looking for