Need Table for BOM selection with qunatity
Hi experts,
I'm unable to get the table for Alternate BOM, BOM component and Component qty in one table. Plz help me if any body having idea about this inform me.
Thanking you,
Narendra
Hi,
Please find below tables for BOM
STKO BOM - header
STPO BOM - item
STAS BOMs - Item Selection
STPN BOMs - follow-up control
STPU BOM - sub-item
STZU Permanent BOM data
PLMZ Allocation of BOM - items to operations
MAST Material to BOM link
KDST Sales order to BOM link
I think use MAST,STKO ,STPO for your use
Regards
SANIL
Similar Messages
-
There are no PSA tables for these selection criteria
Guys,
I am facing this problem while loading Master data hierarchies.I see the below error in Details tab
"There are no PSA tables for these selection criteria ".
Pls advice.Hi ,
1. Check first in source system that whether the extractor is active or not .
Best wayout to check from RSA3.
Hierachy datasources sometime gives error in RSA3 , you can also check froim RSA1HCAT in source system .
2. If extractor is active and while loading it gives error , you need to activate the transfer rules again and try to extract the data from r3 .
With Regards
Ankit Vaish -
Tables for BOM Header and Components
Dear Friends,
Please let me know which tables provide a link between the header Material and corresponding Component Materials of a BOM?
I have seen STKO and STPO but couldn't find such a link in them. STPO gives the component material but I couldn't get any link to Header material.
Regards,
Alok.Hello Alok,
Table for BOM header - STKO
Table for BOM item - STPO
Table for material to BOM link - MAST
Check if MARC table has a material in it and the same material is available in MAST also, it means that BOM has been created for that material..
If Material is available in MARC and not available in MAST, it means BOM has not been created for that material.
Reward Points, if useful.
Regards,
Nitin. -
Table for EDM Profile with Installation or Device numbers
Hi
Can anybody answer Table for EDM Profile with Installation or Device numbers?
Thanks in advance.
DGRHello,
You allocate the profile to a register so you want to have your logical register number.
If you have the equipment number you could go to table ETDZ or call FM ISU_DB_ETDZ_SELECT and fetch the registers.
If you want to see the table of profile allocations you can check table EPROFASS.
If you use IS-U-EDM the tables which contains informations about profile values are EPROFVAL*...
Hopefully some of this infomation is useful for you.
Regards
Olivia -
Thread: There are no PSA tables for these selection criteria - RSAODS209
Hello,
i'm trying to run an infopackage (0GL_ACCOUNT_T011_HIER_ME_FULL_R3) to load complete upload of hierarchy (0GL_ACCOUNT-HIERARCHIES 0GL_ACCOUNT ) extraction via PSA and then in corresponding info object. The load seems to work fine between ECC and PSA but it doesn't:
I lok at PSA and the monitor-request-status is RED and the message: "There are no PSA tables for these selection criteria - RSAODS209".
these are the messages:
Processing (data packet): Errors occurred
Data Package 1 ( 2370 Records ) : Errors occurred
Update PSA ( 2370 Records posted ) : Errors occurred
Data save in PSA started
2370 records written in PSA
There are no PSA tables for these selection criteria
I've created a new package only for loading the PSA (not the final object) but the same error appears.
I have also see this thread but I have no solution yet...
There are no PSA tables for these selection criteria - RSAODS209
thanks for your help!!Hi Marcel,
Check whether you have any RED requests in your PSA--> If so delete them
Make sure your DS, transfer rules/Transformation are active.
Also once replicate your DS & activate. Also activate transfer structure. Then try loading.
Hope it helps!
Regards,
Pavan -
There are no PSA tables for these selection criteria - RSAODS209
Hello,
i'm trying to run an infopackage (0GL_ACCOUNT_T011_HIER_ME_FULL_R3) to load complete upload of hierarchy (0GL_ACCOUNT-HIERARCHIES 0GL_ACCOUNT) extraction via PSA and then in corresponding info object. The load seems to work fine between ECC and PSA but it doesn't:
I lok at PSA and the monitor-request-status is RED and the message: "There are no PSA tables for these selection criteria - RSAODS209".
these are the messages:
Processing (data packet): Errors occurred
Data Package 1 ( 2370 Records ) : Errors occurred
Update PSA ( 2370 Records posted ) : Errors occurred
Data save in PSA started
2370 records written in PSA
There are no PSA tables for these selection criteria
I've created a new package only for loading the PSA (not the final object) but the same error appears.
I have also see this thread but I have no solution yet...
There are no PSA tables for these selection criteria - RSAODS209
thanks for your help!!Duplicate thread
-
Need Table Control in Selection Screen
I have a selection screen with some fields. Now, below these fields, I need a table control in which i will have input parameter along with some check boxes so that i can enter data and use the same while executing the report.
paste the code for the requirement how to add a table control on the selection screen.hi ramesh,
i have a very same requirement as u did. pleae send me the code which u used.
Till now, i have been able to display table control on selection screen. but, how to write or display the output or how to call the output screen. i have to display alv output.
Please help on above issue.
Thanks,
Rajesh -
Add a custom table for field selection while creating field catalog for LIS
Hi,
I have a requirement to add a Custom table to be available for field selection while creating a field catalog for LIS. Its required as there are many custom fields to be used for field catalog creation and adding them in one of the existing tables listed is not a feasible option for us. Please let me knw if its possible..?? If yes how to get it done..??
Regards,
Akash Sinhahi,
You need to add your field in the Data Dictionary first. For example, if
you want the new field in the Order Item field catalog do the following.
Look at structure MCVBAPUSR (SE11). If you already have a user structure
appended to this structure then you can add your new field to your existing
structure. If there is no structure already appended to MCVBAPUSR then you
must create a new structure with your field in it and then append the new
structure to this one.
If you look at structure MCVBAP you will see the data appended to the end
of it.
Now you should see it in the field catalog.
regards,
balajia -
Is there a maximum number of tables for a SELECT?
I know that technically there is nothing preventing me from joining many tables. But I know there are other "limits" like memory, or processing time allowable. I've also read from Tom kyte's advice that as much as possible if it can be done in one SQL statement, do it in SQL. But is there a limit to this?
I have 10 tables that I need to work with. 2 of these tables contain millions of records. At the minimum, I need to at least join 4 of these tables then I could loop for each record and perform processing with the other tables. I could actually join more than 4 tables but I'm wary if it could still cause the system to crash. I'm using BULK COLLECT with LIMIT 1000 to control the fetching. The columns I'm joining are mostly PKs of each table. There are some transactional processing needed so I can't totally avoid a loop.
This is the logic:
<Cursor with joining 4 tables>
Loop
Fetch cursor BULK COLLECT INTO nested table LIMIT 1000
For each record Loop
Per record processing. I'll use the record elements to query from the other 6 tables.
End Loop
EXIT WHEN cursor NOTFOUND
END LOOP
Is it advisable to transfer as many tables as I can in the outside loop so there would be less processing in the inner loop? Or can a query be too big that it is better to manage the number of tables in a SELECT?
Thanks!
Edited by: user12090980 on Jun 3, 2011 6:23 AMuser12090980 wrote:
I have 10 tables that I need to work with. 2 of these tables contain millions of records. At the minimum, I need to at least join 4 of these tables then I could loop for each record and perform processing with the other tables. I could actually join more than 4 tables but I'm wary if it could still cause the system to crash. I'm using BULK COLLECT with LIMIT 1000 to control the fetching. The columns I'm joining are mostly PKs of each table. There are some transactional processing needed so I can't totally avoid a loop.Well, the very same loop structure you code in PL/SQL to "manually join" the required data sets of the 10+ tables, is also implemented in the SQL engine. It is called a nested loop.
So why think that your code can handle joining 10+ tables better than the SQL engine? Also consider the fact that the SQL engine has a number of other (more sophisticated) join algorithms it can use, like hash joins, merge joins and so on.
The biggest problem with the nested loop algorithm is scalability. If you nest the loop 10 deep - then a single loop iteration more in the main loop, can cause a 1000's or even potentially million more iterations in total ("exponential" impact on the loops nested in it).
So nested loop is at times the worse type of join algorithm to use. And IMO, always the wrong thing to code in PL/SQL - as PL/SQL code (irrespective of bulk processing) will always be inferior to the SQL engine when it comes to joining data. -
What are the main tables for BOM (Bill of Materials)
Hi Gurus,
I need to know the tables involved in BOM (Bill of Materials) for Oracle EBS.
Can anyone point out the list of related tables?
ThanksHi Sudipta,
Following are the BOM main tables.
bom_bill_of_materials
bom_inventory_components
bom_reference_designators
bom_substitute_components
mtl_item_revisions
bom_operational_routings
bom_operation_sequences
bom_operation_resources
BOM_BILL_OF_MTLS_INTERFACE
BOM_INVENTORY_COMPS_INTERFACE
BOM_REF_DESGS_INTERFACE
BOM_SUB_COMPS_INTERFACE
MTL_ITEM_REVISIONS_INTERFACE
BOM_OP_ROUTINGS_INTERFACE
BOM_OP_SEQUENCES_INTERFACE
BOM_OP_RESOURCES_INTERFACE
MTL_RTG_ITEM_REVS_INTERFACE
=======================
Following are all tables of BOM.
BOM_ALTERNATE_DESIGNATORS
BOM_ALTERNATE_DESIGNATORS_TL
BOM_ATO_CONFIGS_TEMP
BOM_ATO_CONFIGURATIONS
BOM_BILLS_HEADER_TEMP
BOM_BILL_OF_MATERIALS
BOM_BILL_OF_MATERIALS_ARCHIVE
BOM_BILL_OF_MATERIALS_TEMP
BOM_BILL_OF_MTLS_INTERFACE
BOM_BILL_REVISIONS_B
BOM_BILL_REVISIONS_TL
BOM_CALENDARS
BOM_CALENDAR_DATES
BOM_CALENDAR_EXCEPTIONS
BOM_CALENDAR_SHIFTS
BOM_CAL_WEEK_START_DATES
BOM_CAL_YEAR_START_DATES
BOM_CMP_USR_ATTR_INTERFACE
BOM_COMPARISON_TEMP
BOM_COMPONENTS_B
BOM_COMPONENTS_EXT_B
BOM_COMPONENTS_EXT_TL
BOM_COMPONENT_COLUMNS
BOM_COMPONENT_OPERATIONS
BOM_COMPONENT_OPS_INTERFACE
BOM_COMPONENT_TYPES
BOM_COMP_OPTCLASS_TEMP
BOM_COMP_OPTIONS_TEMP
BOM_CONFIG_EXPLOSIONS
BOM_COPY_ORGANIZATION_LIST
BOM_COPY_STRUCTURE_ACTIONS
BOM_COPY_STRUCTURE_REQUEST
BOM_CTO_MLSUPPLY_MAIN_TEMP
BOM_CTO_MODEL_ORGS
BOM_CTO_ORDER_DEMAND
BOM_CTO_ORDER_LINES
BOM_CTO_ORDER_LINES_UPG
BOM_CTO_OSS_COMPONENTS
BOM_CTO_OSS_ORGS_LIST
BOM_CTO_SRC_ORGS
BOM_CTO_SRC_ORGS_B
BOM_DELETE_ENTITIES
BOM_DELETE_ERRORS
BOM_DELETE_GROUPS
BOM_DELETE_SQL_STATEMENTS
BOM_DELETE_SUB_ENTITIES
BOM_DEPARTMENTS
BOM_DEPARTMENT_CLASSES
BOM_DEPARTMENT_RESOURCES
BOM_DEPENDENT_DESC_ELEMENTS
BOM_DEPEND_DESC_ELEM_ARCHIVE
BOM_DEPT_RES_INSTANCES
BOM_EAM_DEPT_APPROVERS
BOM_EXCEPTION_SETS
BOM_EXCEPTION_SET_DATES
BOM_EXCLUSION_RULE_ARCHIVE
BOM_EXCLUSION_RULE_DEF
BOM_EXPLOSIONS
BOM_EXPLOSIONS_ALL
BOM_EXPLOSION_TEMP
BOM_FORM_QUERY
BOM_IMPLOSION_TEMP
BOM_INTERFACE_DELETE_GROUPS
BOM_INVENTORY_COMPONENTS
BOM_INVENTORY_COMPONENTS_TEMP
BOM_INVENTORY_COMPS_ARCHIVE
BOM_INVENTORY_COMPS_INTERFACE
BOM_INV_COMPONENTS_TEMP
BOM_ITEM_ATTACH_CATEGORY_ASSOC
BOM_ITEM_BACKFLUSH_SUBINV
BOM_LISTS
BOM_LOW_LEVEL_CODES
BOM_MIXED_MODEL_MAP_CELLS
BOM_MIXED_MODEL_MAP_HEADER
BOM_MIXED_MODEL_MAP_PROCESSES
BOM_MIXED_MODEL_MAP_RES
BOM_OPERATIONAL_ROUTINGS
BOM_OPERATION_NETWORKS
BOM_OPERATION_RESOURCES
BOM_OPERATION_RESOURCES_EFC
BOM_OPERATION_SEQUENCES
BOM_OPERATION_SEQUENCES_TEMP
BOM_OPERATION_SKILLS
BOM_OP_NETWORKS_INTERFACE
BOM_OP_RESOURCES_ARCHIVE
BOM_OP_RESOURCES_INTERFACE
BOM_OP_ROUTINGS_ARCHIVE
BOM_OP_ROUTINGS_INTERFACE
BOM_OP_SEQUENCES_ARCHIVE
BOM_OP_SEQUENCES_INTERFACE
BOM_PARAMETERS
BOM_PERIOD_START_DATES
BOM_REFERENCE_DESGS_ARCHIVE
BOM_REFERENCE_DESIGNATORS
BOM_REF_DESGS_INTERFACE
BOM_RESOURCES
BOM_RESOURCES_EFC
BOM_RESOURCE_CHANGES
BOM_RESOURCE_DOWNCODES
BOM_RESOURCE_EMPLOYEES
BOM_RESOURCE_EQUIPMENTS
BOM_RESOURCE_FLEX_FENCES
BOM_RESOURCE_SETUPS
BOM_RESOURCE_SHIFTS
BOM_RES_INSTANCE_CHANGES
BOM_RTGHEADER_TEMP
BOM_RTG_ITEM_REVISIONS_ARCHIVE
BOM_RTG_NETWORK_TEMP
BOM_RTG_OPERATION_TEMP
BOM_RTG_OPER_RES_TEMP
BOM_RTG_RESOURCE_TEMP
BOM_RTG_SUB_RESOURCE_TEMP
BOM_RULES_B
BOM_SETUP_TRANSITIONS
BOM_SETUP_TYPES
BOM_SHIFT_DATES
BOM_SHIFT_EXCEPTIONS
BOM_SHIFT_TIMES
BOM_SMALL_EXPL_TEMP
BOM_SMALL_IMPL_TEMP
BOM_STANDARD_OPERATIONS
BOM_STD_OP_BONUS_CODES
BOM_STD_OP_RESOURCES
BOM_STD_OP_RESP_EXCLUSIONS
BOM_STD_OP_SCRAP_CODES
BOM_STD_SUB_OP_RESOURCES
BOM_STRUCTURES_B
BOM_STRUCTURES_EXT_B
BOM_STRUCTURES_EXT_TL
BOM_STRUCTURE_EXT_B
BOM_STRUCTURE_REVISIONS_B
BOM_STRUCTURE_REVISIONS_TL
BOM_STRUCTURE_TYPES_B
BOM_STRUCTURE_TYPES_TL
BOM_SUBSTITUTE_COMPONENTS
BOM_SUBSTITUTE_COMPS_ARCHIVE
BOM_SUB_COMPS_INTERFACE
BOM_SUB_OPERATION_RESOURCES
BOM_SUB_OPERATION_RESOURCE_EFC
BOM_SUB_OP_RESOURCES_INTERFACE
BOM_WORKDAY_PATTERNS
HTH
Sanjay -
Need table for Transport Request component
Hi,
I need the name of the table that stores the TR name and all the Objects to be transported in them.
Thnx in advance,
ChirantanCheck <b>E070</b>
E070 Change & Transport System: Header of Requests/Tasks
E070A Change & Transport System: Attributes of a Request
E070C CTS: Source/Target Client of Requests/Tasks
E070CREATE Change & Transport System: Creation Date of Request
E070DEP Change & Transport System: Dependencies of Requests
E070L CTS: Index for Assigning Numbers to Requests/Tasks
E070M CTS: Target Development Class/Layer for Requests
E070N UNIX/SAP User Connection
E070P Path under which a C correction is created
E070TC Help Table for E070 for Client-Specific Imports
E070USE Use of Current Requests by Users
E071 Change & Transport System: Object Entries of Requests/Tasks
E071C Change & Transport System: Client-Specific Lock Flag
E071E Lang. Transport: Positive List for Generic Object Selection
E071K Change & Transport System: Key Entries of Requests/Tasks
E071KF Change & Transport System: Nametab Information on Key Fields
E071KFINI Change & Transport System: Nametab Information on Key Fields
E071L Language Transport: Transport Information
E07T Change & Transport System: Short Texts for Requests/Tasks -
How to set BDCDATA table for a SELECT-OPTIONS object?
Dear experts,
I have a transaction with PARAMETERS and SELECT-OPTIONS objects. This transaction will be called by another program by using CALL TRANSACTION 'mytransaction' USING mybdcdata statement. Below is some of the called transaction's source code:
DATA:
date TYPE sflight-fldate.
PARAMETERS:
p_carid TYPE sflight-carrid,
p_conid TYPE sflight-connid.
SELECT-OPTIONS:
so_date FOR date.
This is what I wrote in the calling program to define the values of the called transaction PARAMETERS fields:
DATA:
wa_bdcdata TYPE bdcdata,
it_bdcdata TYPE TABLE OF bdcdata.
wa_bdcdata-program = 'MYPROGRAM'.
wa_bdcdata-dynpro = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'P_CARID'.
wa_bdcdata-fval = 'AA'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'P_CONID'.
wa_bdcdata-fval = '017'.
APPEND wa_bdcdata TO it_bdcdata.
CALL TRANSACTION 'MYTRANSACTION' USING it_bdcdata.
Unfortunately, I don't know how to set the values for the SELECT-OPTIONS screen fields. How to do this?
I've Googled this and tried several guesses but none was found or successful. Thanks in advance.
Regards,
HarisHi ,
Better go for SUBMIT report instead of CALL transaction ...
find the name of report being called on that transaction which you will be calling . Use that report name in SUBMIT
Just take help from below code .
Before using do please read by pressing f1 on SUBMIT syntax .
data:seltab type table of rsparams,
seltab_wa like line of seltab.
move: 'LANGU' to seltab_wa-selname,
'S' to seltab_wa-kind,
'I' to seltab_wa-sign,
'BT' to seltab_wa-option,
'D' to seltab_wa-low,
'I' to seltab_wa-high.
append seltab_wa to seltab.
clear seltab_wa.
move: 'E' to seltab_wa-sign,
'EQ' to seltab_wa-option,
'F' to seltab_wa-low,
space to seltab_wa-high.
append seltab_wa to seltab.
clear seltab_wa.
move: 'AUFNR' to seltab_wa-selname,
p_aufnr to seltab_wa-low.
append seltab_wa to seltab.
clear seltab_wa.
submit rkaep000 using selection-set 'VARIANT1'
with aufnr = p_aufnr
with selection-table seltab
exporting list to memory
and return .
regards
Deepak. -
Dear Experts,
Pls can u tell me table for multilevel bom exposion where i can get the lower level material.
Regards,
Sunil PatilDear Mr.Sunil,
Use tables MAST,STKO,STPO,STAS.
STPO BOM Item Details
STPU BOM Sub Items (designators)
STKO BOM Header Details
MAST BOM Group to Material
STZU BOM History Records
STAS BOM Item Selection
STPF BOM Explosion Structure
PLMZ Allocation of bill of material items to operations
T codes are CS11 - Display BOM Level By Level
CS12 - Display Multilevel BOM
CS13 - Summarised BOM.
Regards
Mangal -
Need table for customer and vendor carry forward balance
Hi,
I need to fetch the carry forward(opening) balance for GL, customer and vendor account for my report.
I have table which contains c/f balance for GL accounts which is "GLT0" and now looking for a table for customer and vendor accounts.
Please let me know if anyone have idea in which table i can get the c/f balance for customer and vendor accounts.
Thanks in advance.
Regards,
SwatiHi Gurus
The requirement from the client side in my case is to have opening balance in Tr code ZFBL1n, ZFBL3N and ZFBL5N.
Now, from the above thread i got the Tables where i could find the Vendor and Customer Opening Balance but i also want Opening Balance for GL.
and my 2nd query is how to get these opening balance in Z report, at Header Level.
Thanks and Regards
Dnyanesh -
I need Air for desktop application either in .exe or in .air with embedded captive runtime just like .apk . I don't want to install adobe air separate . everything should come in installer
I have adobe flash professional cc development tool , let me know whether I have to go with other development tool???
your reply will increase my confidential level
please anyone can help me to solve this problem
Thanks®ards
NiranjanAdobe Flash Professional CC manual
1) Create new project
2) Configure your Project properties
3) Embed runtime, so you users can use Adobe AIR without pre-installed Adobe AIR runtime
4) After publishing you will receive %APP_NAME%.app folder that contain your project files
Maybe you are looking for
-
Content Tracker Reports Query file modification issue - Custom Report
Hi All, I was trying to generate a custom report using Content Tracker. I was successful in doing so. However, I found that sometimes it does not pick up the updated query file of Content Tracker reports. I made a change in my query: from SELECT * FR
-
ITunes 6.0 messing up ID3 tags and file names
Hey guys, i have just upgraded to iTunes 6.0. I have noticed that this new version is messing up my mp3 file names. When i start up iTunes, there would be files that have their Title, artist and other info either missing, reverted to the original mp3
-
Does anyone can help me on this issue from Apple Developer? This bundle is invalid - New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1 or higher and iOS 7 SDK. Do not submit apps built with bet
-
Zombie Downloads Keep Reappearing?
Since updating my ipad to ios5, anytime I plug it into my computer (Windows 7, iTunes 10.5.0.142), anything I've previously redownloaded from the cloud (prior to icloud release) in the past few months suddenly appears in the ipad download queue and a
-
Changes to Drop Ship Orders with configurations/star items
Hi, Can someone in this group clarify a few things with respect to changes to drop ship orders that has configured/star items. The CTO guide says that we cannot do configuration changes on the sales order, if the related PO is 'Approved'. There is a