Table for bom

Dear Experts,
Pls can u tell me table for multilevel bom exposion where i can get the lower level material.
Regards,
Sunil Patil

Dear Mr.Sunil,
Use tables MAST,STKO,STPO,STAS.
STPO               BOM Item Details
STPU               BOM Sub Items (designators)
STKO         BOM Header Details
MAST              BOM Group to Material
STZU              BOM History Records
STAS              BOM Item Selection
STPF        BOM Explosion Structure
PLMZ     Allocation of bill of material items to operations
T codes are CS11 - Display BOM Level By Level
CS12 - Display Multilevel BOM
CS13 - Summarised BOM.
Regards
Mangal

Similar Messages

Tables for BOM Header and Components

Dear Friends,
Please let me know which tables provide a link between the header Material and corresponding Component Materials of a BOM?
I have seen STKO and STPO but couldn't find such a link in them. STPO gives the component material but I couldn't get any link to Header material.
Regards,
Alok.

Hello Alok,
Table for BOM header - STKO
Table for BOM item - STPO
Table for material to BOM link - MAST
Check if MARC table has a material in it and the same material is available in MAST also, it means that BOM has been created for that material..
If Material is available in MARC and not available in MAST, it means BOM has not been created for that material.
Reward Points, if useful.
Regards,
Nitin.

Need Table for BOM selection with qunatity

Hi experts,
I'm unable to get the table for Alternate BOM, BOM component and Component qty in one table. Plz help me if any body having idea about this inform me.
Thanking you,
Narendra

Hi,
Please find below tables for BOM
                      STKO                    BOM - header
     STPO                    BOM - item
     STAS                    BOMs - Item Selection
     STPN                    BOMs - follow-up control
     STPU                    BOM - sub-item
     STZU                    Permanent BOM data
     PLMZ                    Allocation of BOM - items to operations
     MAST                    Material to BOM link
     KDST                    Sales order to BOM link
I think use MAST,STKO ,STPO for your use
Regards
SANIL

What are the main tables for BOM (Bill of Materials)

Hi Gurus,
I need to know the tables involved in BOM (Bill of Materials) for Oracle EBS.
Can anyone point out the list of related tables?
Thanks

Hi Sudipta,
Following are the BOM main tables.
bom_bill_of_materials
bom_inventory_components
bom_reference_designators
bom_substitute_components
mtl_item_revisions
bom_operational_routings
bom_operation_sequences
bom_operation_resources
BOM_BILL_OF_MTLS_INTERFACE
BOM_INVENTORY_COMPS_INTERFACE
BOM_REF_DESGS_INTERFACE
BOM_SUB_COMPS_INTERFACE
MTL_ITEM_REVISIONS_INTERFACE
BOM_OP_ROUTINGS_INTERFACE
BOM_OP_SEQUENCES_INTERFACE
BOM_OP_RESOURCES_INTERFACE
MTL_RTG_ITEM_REVS_INTERFACE
=======================
Following are all tables of BOM.
BOM_ALTERNATE_DESIGNATORS
BOM_ALTERNATE_DESIGNATORS_TL
BOM_ATO_CONFIGS_TEMP
BOM_ATO_CONFIGURATIONS
BOM_BILLS_HEADER_TEMP
BOM_BILL_OF_MATERIALS
BOM_BILL_OF_MATERIALS_ARCHIVE
BOM_BILL_OF_MATERIALS_TEMP
BOM_BILL_OF_MTLS_INTERFACE
BOM_BILL_REVISIONS_B
BOM_BILL_REVISIONS_TL
BOM_CALENDARS
BOM_CALENDAR_DATES
BOM_CALENDAR_EXCEPTIONS
BOM_CALENDAR_SHIFTS
BOM_CAL_WEEK_START_DATES
BOM_CAL_YEAR_START_DATES
BOM_CMP_USR_ATTR_INTERFACE
BOM_COMPARISON_TEMP
BOM_COMPONENTS_B
BOM_COMPONENTS_EXT_B
BOM_COMPONENTS_EXT_TL
BOM_COMPONENT_COLUMNS
BOM_COMPONENT_OPERATIONS
BOM_COMPONENT_OPS_INTERFACE
BOM_COMPONENT_TYPES
BOM_COMP_OPTCLASS_TEMP
BOM_COMP_OPTIONS_TEMP
BOM_CONFIG_EXPLOSIONS
BOM_COPY_ORGANIZATION_LIST
BOM_COPY_STRUCTURE_ACTIONS
BOM_COPY_STRUCTURE_REQUEST
BOM_CTO_MLSUPPLY_MAIN_TEMP
BOM_CTO_MODEL_ORGS
BOM_CTO_ORDER_DEMAND
BOM_CTO_ORDER_LINES
BOM_CTO_ORDER_LINES_UPG
BOM_CTO_OSS_COMPONENTS
BOM_CTO_OSS_ORGS_LIST
BOM_CTO_SRC_ORGS
BOM_CTO_SRC_ORGS_B
BOM_DELETE_ENTITIES
BOM_DELETE_ERRORS
BOM_DELETE_GROUPS
BOM_DELETE_SQL_STATEMENTS
BOM_DELETE_SUB_ENTITIES
BOM_DEPARTMENTS
BOM_DEPARTMENT_CLASSES
BOM_DEPARTMENT_RESOURCES
BOM_DEPENDENT_DESC_ELEMENTS
BOM_DEPEND_DESC_ELEM_ARCHIVE
BOM_DEPT_RES_INSTANCES
BOM_EAM_DEPT_APPROVERS
BOM_EXCEPTION_SETS
BOM_EXCEPTION_SET_DATES
BOM_EXCLUSION_RULE_ARCHIVE
BOM_EXCLUSION_RULE_DEF
BOM_EXPLOSIONS
BOM_EXPLOSIONS_ALL
BOM_EXPLOSION_TEMP
BOM_FORM_QUERY
BOM_IMPLOSION_TEMP
BOM_INTERFACE_DELETE_GROUPS
BOM_INVENTORY_COMPONENTS
BOM_INVENTORY_COMPONENTS_TEMP
BOM_INVENTORY_COMPS_ARCHIVE
BOM_INVENTORY_COMPS_INTERFACE
BOM_INV_COMPONENTS_TEMP
BOM_ITEM_ATTACH_CATEGORY_ASSOC
BOM_ITEM_BACKFLUSH_SUBINV
BOM_LISTS
BOM_LOW_LEVEL_CODES
BOM_MIXED_MODEL_MAP_CELLS
BOM_MIXED_MODEL_MAP_HEADER
BOM_MIXED_MODEL_MAP_PROCESSES
BOM_MIXED_MODEL_MAP_RES
BOM_OPERATIONAL_ROUTINGS
BOM_OPERATION_NETWORKS
BOM_OPERATION_RESOURCES
BOM_OPERATION_RESOURCES_EFC
BOM_OPERATION_SEQUENCES
BOM_OPERATION_SEQUENCES_TEMP
BOM_OPERATION_SKILLS
BOM_OP_NETWORKS_INTERFACE
BOM_OP_RESOURCES_ARCHIVE
BOM_OP_RESOURCES_INTERFACE
BOM_OP_ROUTINGS_ARCHIVE
BOM_OP_ROUTINGS_INTERFACE
BOM_OP_SEQUENCES_ARCHIVE
BOM_OP_SEQUENCES_INTERFACE
BOM_PARAMETERS
BOM_PERIOD_START_DATES
BOM_REFERENCE_DESGS_ARCHIVE
BOM_REFERENCE_DESIGNATORS
BOM_REF_DESGS_INTERFACE
BOM_RESOURCES
BOM_RESOURCES_EFC
BOM_RESOURCE_CHANGES
BOM_RESOURCE_DOWNCODES
BOM_RESOURCE_EMPLOYEES
BOM_RESOURCE_EQUIPMENTS
BOM_RESOURCE_FLEX_FENCES
BOM_RESOURCE_SETUPS
BOM_RESOURCE_SHIFTS
BOM_RES_INSTANCE_CHANGES
BOM_RTGHEADER_TEMP
BOM_RTG_ITEM_REVISIONS_ARCHIVE
BOM_RTG_NETWORK_TEMP
BOM_RTG_OPERATION_TEMP
BOM_RTG_OPER_RES_TEMP
BOM_RTG_RESOURCE_TEMP
BOM_RTG_SUB_RESOURCE_TEMP
BOM_RULES_B
BOM_SETUP_TRANSITIONS
BOM_SETUP_TYPES
BOM_SHIFT_DATES
BOM_SHIFT_EXCEPTIONS
BOM_SHIFT_TIMES
BOM_SMALL_EXPL_TEMP
BOM_SMALL_IMPL_TEMP
BOM_STANDARD_OPERATIONS
BOM_STD_OP_BONUS_CODES
BOM_STD_OP_RESOURCES
BOM_STD_OP_RESP_EXCLUSIONS
BOM_STD_OP_SCRAP_CODES
BOM_STD_SUB_OP_RESOURCES
BOM_STRUCTURES_B
BOM_STRUCTURES_EXT_B
BOM_STRUCTURES_EXT_TL
BOM_STRUCTURE_EXT_B
BOM_STRUCTURE_REVISIONS_B
BOM_STRUCTURE_REVISIONS_TL
BOM_STRUCTURE_TYPES_B
BOM_STRUCTURE_TYPES_TL
BOM_SUBSTITUTE_COMPONENTS
BOM_SUBSTITUTE_COMPS_ARCHIVE
BOM_SUB_COMPS_INTERFACE
BOM_SUB_OPERATION_RESOURCES
BOM_SUB_OPERATION_RESOURCE_EFC
BOM_SUB_OP_RESOURCES_INTERFACE
BOM_WORKDAY_PATTERNS
HTH
Sanjay

Agile PLMA: MDS mapping table for BOM table

Hi,
I'm looking for BOM equivalent table in mds schema.
Currently OBIEE 10g is installed.
It would be really helpful, if you could share the entire schema mappings (Agile to MDS schema).
Thanks,
Prem.

Any hints on this would be highly appreciated.
Regards,
Prem.

Database fields and tables for BOM

Please help on following points which are from requirement on the new program i have to develop.
(1) Source the Material Quantity
The new program will need to search all plant/s if the plant field in the search criteria is blank, or alternatively, search the material, plant and storage location criteria combination, for the current unrestricted stock quantity of material/s.
i can find this Unrestricted stock value from the material master field MARD-LABST. am i correct?
(2)Locate the Bill of Material High Level materials.
When the quantity of material/s at the plant/s is sourced, the program will then need to goto the Bill of Material (BOM) functionality in SAP to find the Valid (on the current date) High Level material/s, associated with the BOM Low Level material number entered into the program screen. If the materials entered into the program matnr field is not a Low Level BOM, then report the error in the spool report.
this is the point where i am stuck,please tell me how cani do this. i mean from which tables i have to fetch the high lavel material associated with BOM low level material number. also i don't know how do we identify the high and low lavel materials in a BOM.
Finally i have to create a batch program for Transfer Posting (Material to Material Transfer) to convert Low lavel BOM material into high lavel BOM via transaction MB1B, which can be done only when above secoond issue is resolved.

BOM
http://help.sap.com/saphelp_erp2005/helpdata/en/ea/e9b7234c7211d189520000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
http://www.sap-img.com/sap-sd/sales-bom-implementation.htm
http://www.sap-basis-abap.com/sappp007.htm
Regards,
Santosh

Table for BOM changes

Is there a report that I can run to find all BOM changes for a specific date? Is there a table that I can query that would hold this information?
I would also like to perform the same search for recipies and material master changes.

Hi
YOu can use CS80.
I think you must be aware about the BOM history maintenance which you select at the time of customization.
After you select the indicator please go to the table MKAL and find out the BOM.
It will show you all the changes made in a particular BOM
also you can find the change records in tables CDHDR (Header records), CDPOS (Item records), CDATA (Details)
Material master changes - MM04
Recipe change report - check C260 and C261
regards
Srinivas

Tables for BOM

Hi All,
What are the tables used to find BOM?
Thnx.

hi,
The BOM tables are as follows:
MAST---->Material to BOM Link
STKO -
>BOM Header
STPO----->BOM item

Table for BOM component table for SFG/FERT goods

Dear All,
We are creating FRICE to calculate the cost of the product. The input parameter is the fert/sfg goods and the qty consumed to produce the goods and the opening stock and closing stock of the input/raw material of the fert/sfg has to be captured. From which table the same can be captured.
Regards
Vasantha.

Dear All,
We are creating FRICE to calculate the cost of the product. The input parameter is the fert/sfg goods and the qty consumed to produce the goods and the opening stock and closing stock of the input/raw material of the fert/sfg has to be captured. From which table the same can be captured.
Regards
Vasantha.

Table for Valid to date in BOM item

Hi Exeprts,
Can any one help me on this in which db table Valid to date:DATUB is Updates with reference to Change Number.
Best Regards,
Venkata Siva.
Edited by: venkata siva reddy on Apr 27, 2011 9:28 PM

Hi
The Valid-to date will always be set to 31.12.9999. Instead you can get the valid-to date using the below logic.
-> Get all the BOM from T415A table for the material number into T_T415A
-->LOOP AT t_t415a.
    ON CHANGE OF t_t415a-matnr OR t_t415a-werks OR t_t415a-stlal.
      IF sy-tabix NE 1.
        MOVE : v_matnr TO t_dates-matnr,
               v_werks TO t_dates-werks,
               v_stlan TO t_dates-stlan,
               v_datuv TO t_dates-datuv,
               v_stlal TO t_dates-stlal.
        IF v_matnr NE t_t415a-matnr.
          t_dates-datub = c_99991231.
        ELSE.
          t_dates-datub = t_t415a-datuv - 1.
        ENDIF.
        APPEND t_dates.
        CLEAR :
        v_matnr,
        v_werks,
        v_stlan,
        v_datuv,
        v_stlal.
      ENDIF.
    ENDON.
    v_matnr = t_t415a-matnr.
    v_werks = t_t415a-werks.
    v_stlan = t_t415a-stlan.
    v_datuv = t_t415a-datuv.
    v_stlal = t_t415a-stlal.
ENDLOOP.
Regards
Dhurga

More than 1 line items in bdc using table controls for BOM

Hi....
how do u update more than one line item for BOM using BDC table control.......
is there any specific command for doing that.......
hav tried d following code bt it takes the flatfile i/p FOR 2 LINE ITEMS as 2 different BOM'S.....
would appreciate ur help....plz provide code.............
REPORT zbdc4_cs01
       NO STANDARD PAGE HEADING LINE-SIZE 255.
INCLUDE bdcrecx1.
DATA : a TYPE i,
       b type i,
       c type i.
DATA : BEGIN OF it_rec OCCURS 0,
       rec(200) TYPE c,
       END OF it_rec.
DATA : BEGIN OF ctab OCCURS 0,
       matnr(18),
       werks(4),
       stlan(1),
       END OF ctab.
DATA : BEGIN OF xtab OCCURS 0,
       idnrk(18),
       menge(13),
       postp(1),
       END OF xtab.
DATA : BEGIN OF itab OCCURS 0,
       matnr(18),
       werks(4),
       stlan(1),
       idnrk(18),
       menge(13),
       postp(1),
       END OF itab.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename            = 'C:/TEST4.TXT'
      filetype            = 'ASC'
      has_field_separator = 'X'
    TABLES
      data_tab            = it_rec.
LOOP AT it_rec.
    a = strlen( it_rec-rec ).
    if a = 55.
    itab-matnr = it_rec-rec+0(18).
    itab-werks = it_rec-rec+18(4).
    itab-stlan = it_rec-rec+22(1).
    itab-idnrk = it_rec-rec+23(18).
    itab-menge = it_rec-rec+41(13).
    itab-postp = it_rec-rec+54(1).
    APPEND itab.
    elseif a > 55.
    itab-matnr = it_rec-rec+0(18).
    itab-werks = it_rec-rec+18(4).
    itab-stlan = it_rec-rec+22(1).
    itab-idnrk = it_rec-rec+23(18).
    itab-menge = it_rec-rec+41(13).
    itab-postp = it_rec-rec+54(1).
    APPEND itab.
    itab-idnrk = it_rec-rec+55(18).
    itab-menge = it_rec-rec+73(13).
    itab-postp = it_rec-rec+86(1).
    APPEND itab.
    endif.
ENDLOOP.
PERFORM open_group.
LOOP AT itab.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29N-STLAN'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RC29N-MATNR'
                                   itab-matnr.           "'3000000107'.
    PERFORM bdc_field       USING 'RC29N-WERKS'
                                   itab-werks.              "'UN02'.
    PERFORM bdc_field       USING 'RC29N-STLAN'
                                   itab-stlan.              "'1'.
    PERFORM bdc_field       USING 'RC29N-STLAL'
    PERFORM bdc_field       USING 'RC29N-DATUV'
                                  '11.08.2008'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0110'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RC29K-BMENG'
                                  '1'.
    PERFORM bdc_field       USING 'RC29K-STLST'
                                  '1'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29K-EXSTL'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0111'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29K-LABOR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0140'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSTP(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RC29P-IDNRK(01)'
                                   itab-idnrk.             "'1000000232'.
    PERFORM bdc_field       USING 'RC29P-MENGE(01)'
                                   itab-menge.              "'100'.
    PERFORM bdc_field       USING 'RC29P-POSTP(01)'
                                   itab-postp.             "'L'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0130'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSNR'.
    PERFORM bdc_field       USING 'RC29P-POSNR'
                                  '0010'.
    PERFORM bdc_field       USING 'RC29P-IDNRK'
                                  '1000000232'.
    PERFORM bdc_field       USING 'RC29P-MENGE'
                                  '100'.
    PERFORM bdc_field       USING 'RC29P-MEINS'
                                  'KG'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0131'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POTX1'.
    PERFORM bdc_field       USING 'RC29P-SANKA'
                                  'X'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0140'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSNR(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0140'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSNR(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=FCBU'.
    PERFORM bdc_transaction USING 'CS01'.
ENDLOOP.
PERFORM close_group.

Hi
Check this sample code for the Table Control in BDC:
data: fnam(20) type c.
move 1 to id.
    loop at TI_STAGING WHERE VENDOR = IT_STAGING-VENDOR AND DOCDATE = IT_STAGING-DOCDATE.
      concatenate 'RM06E-EPSTP(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-itmcategory.
      concatenate 'EKPO-KNTTP(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-accassignment.
      concatenate 'EKPO-EMATN(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-material.
      concatenate 'EKPO-TXZ01(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-shortxt.
      quan = ti_staging-poqty.
      concatenate 'EKPO-MENGE(0' id ')' into fnam.
      perform bdc_field       using fnam quan.
      concatenate 'RM06E-EEIND(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-deliverydate.
      netpr = ti_staging-netpr.
      concatenate 'EKPO-NETPR(0' id ')' into fnam.
      perform bdc_field       using fnam netpr.
      concatenate 'EKPO-MATKL(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-mategroup.
      concatenate 'EKPO-WERKS(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-plant.
      ID = ID + 1.
    ENDLOOP.
Regards,
Vishwa.

Table for Assembly indicator checkbox in BOM

Please inform me about Table for Assembly indicator checkbox in BOM
Field name--- STLKZ.
If table is not there then how to find if this field is checked or Not checked in development program

Dear Mayuresh,
There is no table where in you can get this information which has got an assembly of its won.
Either you can use CS11,CS12 or CS13 for limited level explosion or else to identify for which
components an assembly exists for itself.
Or else at Functional module level.
Regards
Mangalraj.S

Report for BOM materials

Dear Experts,
i have scenario which i need to capture but do not have any standard report and for that reason i am going in for Z development of the reports. please guide me so as to which field to be pulled to get the desired output.
Scenario:
We create Purchase order with a version control
1. First version has the data which act as baseline and we want to compare rest of the versions as variance
2. If the line item in PO is a subcontracting material with L- then the subcomponents will be present as a BOM
3. when i ammend the PO for the Qty the BOM items also get ammended but do not reflect in the version control - display changes
4. I want to capture the PO with each line item against which there is qty change and also the material BOM change due to qty change.
Is there any table from which i capture the data.
Pl. help me out it would be of great help
Thanks & Regards,
Farhan

Hi
the following tables might be useful
MAST
STKO - Header Table of BOM
STPO - Item Level for BOM
MAKT
regards
maniraj

The standard report for BOMs of a material with a selected period?

Hi Gurus
Is there any standard report for BOMs of a material with a selected period?

Hi,
You will have to develop a report for your requirement,
The following tables will be used for the report
MAST-WERKS
STPO-MATNR
MARA-MAKTX
STPO-BMENG
STPO-POSNR
STPO-IDNRK
STPO-MAKTX
STPO-DATUV
STPO-MENGE
STKO-MEINS
STPO-AVOAU
Regards
Merwyn

User exit for BOM

hello,....
problem: using BOM in VA01...for free goods material.....
I am working on user exit for BOM...I need to write a code in FV45SFCO_CONFIGURATION_SET_STM under this we have call customer funcion '003'
if we click on this we will enter in include ZXVVAU12.....In this including I need to write the code(user exit) by using XSTB table and the values in that table I have to populate in XVBAP.......for the BOM Explosion........when we use VA01......
so please tell me how can i write the code in that exit ...by getting the data from XSTB to XVBAP........by using the field STLAL (It is Alternative BOM in BOM Screen)...for example if I select '05' (stlal) BOM type.....the values in XSTB populate in XVBAP...
anyone help me on this........
Otherwise give me any other sample code for the userexit BOM so that I will learn...a lot from that....
Thanks in advance,
Madhu

Hi Madhu,
You can try something like this to read XSTB in user exits EXIT_SAPFV45S_003.
DATA: XT_XSTB LIKE STANDARD TABLE OF SDSTPOX WITH HEADER LINE.
FIELD-SYMBOLS: <XSTB> TYPE TABLE.
DATA: FIELD_NAME(30) VALUE '(SAPFV45S)XSTB[]'.
ASSIGN (FIELD_NAME) TO <XSTB>.
XT_XSTB[] = <XSTB>.
READ TABLE XT_XSTB WITH KEY STLAL = '05'.
IF SY-SUBRC = 0.
.... <--- your logic to move to VBAP
ENDIF.
Regards,
Ferry Lianto

Table for bom

Similar Messages

Maybe you are looking for