Need to add 2 columns in query
Hello, I have a query that I need to add 2 of the columns together, but I have been unsuccessful in my attempts to this point. I'm using Oracle SQL Developer 1.2.1
Here is the query:
WITH group_by_4_column_results AS
(SELECT m_atschunk.employee AS employee,
SUM(CASE
WHEN
M_ATSCHUNK.rolloffDaysCount = '108545043' AND m_atschunk.infractiondate BETWEEN SYSDATE - 365 AND SYSDATE THEN 1 ELSE 0 END) as rolloffs,
M_ATSCHUNK.INFRACTIONDATE + 365 as infractionDate,
M_ATSCHUNK.calculationDate as CalcDate
FROM M_ATSCHUNK
group by employee, infractionDate, rolloffDaysCount, calculationDate
SELECT g4.*,
SUM (rolloffs) OVER (PARTITION BY employee) AS total_rolloffs
FROM group_by_4_column_results g4
ORDER BY total_rolloffs desc
And it will output this:
||Employee|| ||Rolloffs|| ||InfractionDate|| ||CalcDate|| ||Total_Rolloffs||
||86707|| ||1|| ||3/8/2011|| ||(null)|| ||134||
||86707|| ||1|| ||3/9/2011|| ||(null)|| ||134||
||86707|| ||1|| ||3/10/2011|| ||(null)|| ||134||
||86707|| ||1|| ||3/11/2011|| ||(null)|| ||134||
||86707|| ||1|| ||3/12/2011|| ||(null)|| ||134||
||86707|| ||1|| ||3/13/2011|| ||(null)|| ||134||
I know need it to add the InfractionDate + Total_RollOffs columns and output intot he CalcDate column
The table was not created conventially using SQL, it was creating using a using a metabean file:
customerForm = /com/merced/datamart/repository/forms/CustomerForm,\
employee = /com/merced/datamart/repository/Person,\
filledOutBy = /com/merced/datamart/repository/Person,\
infractionDate = /com/merced/metabeans/Date,\
infractionCode = /com/merced/apps/ATS/forms/enumerations/infractionCodeType,\
WLB = /com/merced/apps/ATS/forms/enumerations/WLBType,\
rolloffDaysCount = /com/merced/apps/ATS/forms/enumerations/atsyesNoType,\
shiftInterval = /com/merced/apps/ATS/forms/enumerations/shiftIntervalType,\
premiumDays = /com/merced/apps/ATS/forms/enumerations/atsyesNoType,\
PABonusPoints = /com/merced/apps/ATS/forms/enumerations/atsyesNoType,\
comments = /com/merced/metabeans/String,\
appliedWLC = /com/merced/apps/ATS/forms/enumerations/appliedWLCType,\
calculationDate = /com/merced/metabeans/Date,\
calculationInteger = /com/merced/metabeans/Integer
If you want to use 0COUNTRY as a navgational atttr. first go to info object 0BPARTNER and make 0COUNTRY as a navigational attr. save activate.
The go to cube or DSO and check Navigational attr box infront of this info object,
And then it will be available as a navigational attr in your query.
Hope this helps,
Assgn points if helpful.
Regards
Similar Messages
-
Need to add new column in SAP Query - Please guide me in this regard
Dear All,
In SAP Query, I need to put a new coulmn of each record for the difference of Billing date and PGI date as a work days.
eg: Billing Date = 02.05.2008
PGI Date = 08.05.2008
Take a Variable i.e. Days = Billing Date - PGI Date that will display as 5 days by excluding Saturday and Sunday.
After doing calculation of these work days for each record, we need a to add a new coulmn in that record as field lable as "Work Days" and display.
Please Guide me in this regard
Regards,
Sateesh.Hi Rama,
In SQ01 when you are in the fields (first would be attributes, when you click next it takes you to field groups, and again when you click next if takes you to fields tab) check the following menu path
EDIT -> LOCAL FIELD -> CREATE
You can define the formula as per your requirement and populate the field.
Hope this is helpful.
Thanks,
Pavan -
Need to add default columns to a CrossTab
Post Author: ViBaldi
CA Forum: Crystal Reports
Just wondering if anyone has any ideas, as I have run out...
I have a summary report that queries an SQL view and contains a CrossTab. The selection criteria is filtered by 4 selectable parameter fields:
1) Region 2) Type of Job 3) Start Date 4) End Date
With the exception of the dates, the user can select u2018one or manyu2019 from the dynamic parameter fields. The dates are selectable with Calendar controls. The Report is Grouped initially by Region. In my CrossTabs in each selected Region, the rows are the selected Job Type and the columns are grouped by the Month of the Job. The summarized field in the CrossTab is a Distinct Count of the JobID's. So basically, I want a monthly summary of Job Types, where the user can select the Job Types and date range for any particular Region.
My dilemma is that my Cross Tab will not include Months, if there was no activity in those months. I want it to still print the Months, regardless of whether there were no jobs, but show a count of zero. Note that if there were different Job Types during the Month, it will appear with a zero in the column for the correct Job Type, but if that month had none of the selected Job Types, the Month is skipped altogether. Somehow, I would like to have the CrossTab leave all selected Months within the Start and End Dates in the columns, but with zero's as the Distinct Count, instead of skipping those Months.
Here is a typical example:
User selects 4 regions from the Regions PickList (say..Vancouver, Victoria, Nanaimo, Sooke).
User selects 3 Job Types from the Job Type pick list (sayu2026Install, Removal, Service Call).
User selects Jan. 1/07 as Start Date and Jun. 31/07 as End Date
All of these picklists populate on first pass of the query, I believe.
My Report Groups into Regions first, and then includes a CrossTab for each Region. I had hoped that the CrossTab would list all 3 Job Types in the left hand Rows, and all six Months in the Columns. Not so! If there was no u2018Installu2019 activity in Vancouver for all six Months, then that Job Type is omitted. Similarly, if there were no Job Type activities (of the 3 selected) at all for the whole month of March in Victoria, then the column for March is omitted. But, if March had 2 u2018Removalu2019 Job Type, and no other activity, and all other Months had at least one Job Type activity, then all Months would appear, and zerou2019s would be present where appropriate.
So, it seems obvious that the query doesnu2019t have data for the Months with no activity, and you cannot do a Distinct Count of no data. I cannot insert fake records into the database, nor would I want to, because the JobID is a Unique Identifier. I have viewed a similar post that suggests linking to a .txt file, but I think that this may not work for me. I suspect that the ability for the user to select a date range would be a problem here, because the user could select only 3 consecutive months, or 18 consecutive months.
Any ideas will be greatly appreciated. Please note that I am fairly proficient with Crystal Reports XI, and have tried everything I know, but I am relatively inexperienced with CrossTabs.
Thanks!Post Author: Doug Johnson
CA Forum: Crystal Reports
This may not be the best solution but I believe it will solve your problem. Try adding dummy records to your SQL view query. I've done this with crosstabs in the past. Use a UNION to your original select statement to do this. So if your original query looks like:SELECT job_type, month, cross_value FROM tableA {where...blah blah}then add some UNIONs to it and return the whole thing as one view.SELECT job_type, month, cross_value FROM tableA {where...blah blah}UNIONSELECT DISTINCT job_type, 'January' AS month, 0 AS cross_value FROM tableA {where...blah blah}UNIONSELECT DISTINCT job_type, 'Feburary' AS month, 0 AS cross_value FROM tableA {where...blah blah}ect....If you are doing a sum at the crosstab value, the extra 0's won't harm anything. If you're doing a count you will have to compensate by subtracting the extra 0 job_types/months. You could also create a dummy table that contains the distinct job_types, 0 values and months, then just add one UNION selecting from that table. OR you could just add an extra record to your existing table(s) that contains 0's for all months/job types. -
How to add extra column in query designer
Hello Guru's,
I got the query like this
Actuals
cal/month 01/2008 02/2008 03/2008
cash
reveunve
liabilities
i need the query to be like this
Actuals
cal/ months 01/2008 02/2008 03/2008 Q1 04/2008 05/2008 06 2008 Q2
cash
revenue
libilities
that Q1 is sum of first three months,
can you please tell me how to add extracolumn and add those.
Thanks,
snehaHi sneha,
You can do this by using structure .Create the selection for3 month using variable and defining offset for that, creat new formula for Q1 = 123 , then create same selection for next 3 months and same for Q2.
Regards,
Sumit. -
Need to add a column in front in my current Vb script
Attached is the script that I use for copying text from multiple files and transfering them to the excell sheet, listed below is my current outout in excell. Need a column in front for dates for all the rows. The date is also contained in the text
file 4 th row. Listed below also is the text file that i read from. Any help is very much appriciated. Thanks
'Option Explicit
Sub OpenMultipleFiles()
Application.ScreenUpdating = False
Dim fn As Variant, f, c As Integer
c = 1
fn = Application.GetOpenFilename("All_files,*.*", _
1, "Select One Or More Files To Open", , True)
If TypeName(fn) = "Boolean" Then Exit Sub
For f = 1 To UBound(fn)
Debug.Print "Selected file #" & f & ": " & fn(f)
'Workbooks.Open fn(f)
Open fn(f) For Input As #f
Ctr = 0
Do
Line Input #f, Data
Ctr = Ctr + 1
Cells(Ctr, 1).Value = Data
Loop While EOF(f) = False
Close #f
Cells(1, 1).Resize(Ctr, 1).TextToColumns Destination:=Range("A1"), _
DataType:=xlDelimited, TextQualifier:=xlDoubleQuote, _
ConsecutiveDelimiter:=True, Tab:=True, Semicolon:=False, Comma:=False _
, Space:=False, Other:=True, OtherChar:="=", FieldInfo:=Array(1, 1), _
TrailingMinusNumbers:=True
'Create new sheet with raw data
'Mycell1 = Sheets("Sheet2").Cells(1, c) 'Find last cell with data
'On Error Resume Next
Worksheets("Sheet1").Range("A11:A30").Copy Destination:=Worksheets("Sheet2").Cells(c, 1)
c = c + 21
Sheets("Sheet1").Select
Cells.ClearContents 'Clear data on sheet1
Range("A1").Select
Next f
Application.ScreenUpdating = True
End Sub
Text File date is read fromLOT SUMMARY [24 HOURS]
Machine ID IPIe 29
Start Date 12-18-2013
Start Time 00:00:00
End Time 00:00:00
Inspection Summary TOTAL TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5
Units Inspected 195 35 40 40 40 40
Units Passed 0 0 0 0 0 0
Units Yield 0.00 0.0 0.0 0.0 0.0 0.0
Units Failed 195 35 40 40 40 40
Grab Retry 0 0 0 0 0 0
Saline Shortage 0 0 0 0 0 0
Saline In-Range 0 0 0 0 0 0
Saline Excess 0 0 0 0 0 0
Defects
Spot 0 0 0 0 0 0
Non-Circular 0 0 0 0 0 0
Tear Lens 0 0 0 0 0 0
Gap Lens 0 0 0 0 0 0
No Lens 0 0 0 0 0 0
No Saline 195 35 40 40 40 40
Inner Tear 0 0 0 0 0 0
Current Output, need one column in the left for dates for all the rows. Units Inspected 195 35 40 40 40 40
Units Passed 0 0 0 0 0 0
Units Yield 0.00 0.0 0.0 0.0 0.0 0.0
Units Failed 195 35 40 40 40 40
Grab Retry 0 0 0 0 0 0
Saline Shortage 0 0 0 0 0 0
Saline In-Range 0 0 0 0 0 0
Saline Excess 0 0 0 0 0 0
Defects
Spot 0 0 0 0 0 0
Non-Circular 0 0 0 0 0 0
Tear Lens 0 0 0 0 0 0
Gap Lens 0 0 0 0 0 0
No Lens 0 0 0 0 0 0
No Saline 195 35 40 40 40 40
Inner Tear 0 0 0 0 0 0Hello,
I'd ask in
The Official Scripting Guys Forum!
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Need to add navigational attribute in query level
Hi,
Im new to bi . in dso i have a navigational attribute 0CRM_MKTELM _ 0BPARTNER . 0CRM_MKTELM is a master data and 0BPARTNER also a master data that dso is used in infoset , 0country is the attribute of 0bpartner. i need to bring the 0country into my query . how can i do that
Regards,
SenthilIf you want to use 0COUNTRY as a navgational atttr. first go to info object 0BPARTNER and make 0COUNTRY as a navigational attr. save activate.
The go to cube or DSO and check Navigational attr box infront of this info object,
And then it will be available as a navigational attr in your query.
Hope this helps,
Assgn points if helpful.
Regards -
Need to add one column to TCODE :S_ALR_87013532
hi all,
i am suppose to add column 'person responsible' to tcode:S_ALR_87013532
which is a drill down report and created by report painter.
when i tried to create new report with report painter by makeing copy of existing one, it didnt work.
as person responsible field is not available in list of available characteristics.
according to me making Zreport from scratch would not be good idea.
can anybody tell me how can i add extra field to list of available characteristics?Hello ,
check in Config, i'm sure this can be done thru config.
regards
Prabhu -
How to modify an existing query to add a column
Hi all, I have an existing query :
SELECT 2 as SOURCE_SYSTEM_ID, LI.IPROD AS SYSTEM_ID, LI.IPROD AS PART_NUMBER, LI.IDESC AS PART_DESCRIPTION, IsNULL((SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE (LZ.CCTABL = 'SIRF2') AND LI.IREF02 = LZ.CCCODE), '') AS PLANT_CODE, LIS.ISSTSD
AS lifecycle_status, CASE LI.ILDTE WHEN 0 THEN convert(date, GETDATE()) ELSE (SUBSTRing(convert(varchar, LI.ILDTE), 1,4)+'-'+SUBSTRing(convert(varchar,LI.ILDTE), 5,2)+'-'+SUBSTRing(convert(varCHAR,LI.ILDTE), 7,2)) END AS LAST_ACTIVITY_DATE,
LZPA.DATA AS PRODUCTION_TYPE, (CASE (LI.IITYP) WHEN '6' THEN 'SERVICE' ELSE 'ITEM' END) AS ITEM_TYPE, LI.IVEND AS PRIMARY_VENDOR, (SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='UNITMEAS' AND LZ.CCCODE=LI.IUMS AND LZ.CCLANG = '') AS
UOM_INVENTORY, (SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='UNITMEAS' AND LZ.CCCODE=LI.IUMS AND LZ.CCLANG = '') AS UOM_BOM, (SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='UNITMEAS' AND LZ.CCCODE=LI. IUMR
AND LZ.CCLANG = '') AS UOM_SELL, (SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='UNITMEAS' AND LZ.CCCODE=LI.IUMP AND LZ.CCLANG = '') AS UOM_PURCHASE, IsNULL((SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='BUYER'
AND LZ.CCCODE=LI.IPURC), '') AS BUYER, (LI.IMHIGH) AS ITEM_HEIGHT, SUBSTRING(IsNULL((SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='SIRF5' AND LZ.CCCODE=LI.IREF05), ''), 1, 20) AS APPLICATIONS, IsNULL((SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC
LZ WHERE LZ.CCTABL='SIRF3' AND LZ.CCCODE=LI.IREF03), '') AS PORGRAM, (LI.IMWIDE) AS ITEM_WIDTH, LI.IMLONG AS ITEM_DEPTH, LI.IWGHT AS ITEM_WEIGHT_NET, LI.IMNNWU AS ITEM_WEIGHT_TARE FROM HCMEUP01.FRDA385A.LBPCSF.IIM LI, HCMEUP01.FRDA385A.LBPCSF.ISC LIS,HCMEUP01.FRDA385A.LBPCSF.ZPA
LZPA WHERE LI.ICOND = LIS.ISSTSC AND LZPA.PKEY=('ITEMTYP'+LI.IITYP )
Now I need to add a column called WORK_CENTER. I added a subquery to the existing one. It looks like this:
SELECT 2 as SOURCE_SYSTEM_ID, LI.IPROD AS SYSTEM_ID, LI.IPROD AS PART_NUMBER, LI.IDESC AS PART_DESCRIPTION, IsNULL((SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE (LZ.CCTABL = 'SIRF2') AND LI.IREF02 = LZ.CCCODE), '') AS PLANT_CODE, LIS.ISSTSD
AS lifecycle_status, CASE LI.ILDTE WHEN 0 THEN convert(date, GETDATE()) ELSE (SUBSTRing(convert(varchar, LI.ILDTE), 1,4)+'-'+SUBSTRing(convert(varchar,LI.ILDTE), 5,2)+'-'+SUBSTRing(convert(varCHAR,LI.ILDTE), 7,2)) END AS LAST_ACTIVITY_DATE,
LZPA.DATA AS PRODUCTION_TYPE, (CASE (LI.IITYP) WHEN '6' THEN 'SERVICE' ELSE 'ITEM' END) AS ITEM_TYPE, LI.IVEND AS PRIMARY_VENDOR, (SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='UNITMEAS' AND LZ.CCCODE=LI.IUMS AND LZ.CCLANG = '') AS
UOM_INVENTORY, (SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='UNITMEAS' AND LZ.CCCODE=LI.IUMS AND LZ.CCLANG = '') AS UOM_BOM, (SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='UNITMEAS' AND LZ.CCCODE=LI. IUMR
AND LZ.CCLANG = '') AS UOM_SELL, (SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='UNITMEAS' AND LZ.CCCODE=LI.IUMP AND LZ.CCLANG = '') AS UOM_PURCHASE, IsNULL((SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='BUYER'
AND LZ.CCCODE=LI.IPURC), '') AS BUYER, (LI.IMHIGH) AS ITEM_HEIGHT, SUBSTRING(IsNULL((SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE LZ.CCTABL='SIRF5' AND LZ.CCCODE=LI.IREF05), ''), 1, 20) AS APPLICATIONS, IsNULL((SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC
LZ WHERE LZ.CCTABL='SIRF3' AND LZ.CCCODE=LI.IREF03), '') AS PORGRAM, (LI.IMWIDE) AS ITEM_WIDTH, LI.IMLONG AS ITEM_DEPTH, LI.IWGHT AS ITEM_WEIGHT_NET, LI.IMNNWU AS ITEM_WEIGHT_TARE,
(SELECT LC.LWRKC FROM HCMEUP01.FRDA385A.LBPCSF.LCR LC WHERE RTRIM(LTRIM(LC.LITEM)) = RTRIM(LTRIM(LI.IPROD)) ) AS WORK_CENTER FROM HCMEUP01.FRDA385A.LBPCSF.IIM LI, HCMEUP01.FRDA385A.LBPCSF.ISC LIS,HCMEUP01.FRDA385A.LBPCSF.ZPA LZPA WHERE
LI.ICOND = LIS.ISSTSC AND LZPA.PKEY=('ITEMTYP'+LI.IITYP )
Please see the bolded and italic part. The problem is that the subquery is non distinct. I am getting an error "
Msg 512, Level 16, State 1, Line 2
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Can you let me know how I can resolve this issue? it is an urgent request. Thank you
Thank You Warmest Fanny PiedI was given the existing query and the subquery as they were. The subquery is as it is returning multiple records on the columns selected. The person who give me the sub query is sure those are the correct tables to use to develope/change the
query.
select
DISTINCT a.litem,
b.IPROD,b.idesc,a.lwrkc
from HCMEUP01.FRDA385A.LBPCSF.LCR
a, HCMEUP01.FRDA385A.LBPCSF.IIM
b
where
a.litem=b.iprod
Thank you for your help.
Thank You Warmest Fanny Pied -
How to add new columns in materialized view
We are using Oracle 10g Release2.
We need to add new columns to a prebuilt fast refresh materialized view. We want to add 4 new columns in this table and make them part of select statement in the materialized view. We can drop the view but we cannot do complete refresh after that because the paymentsInfo table has a creation_timestamp column which is populated by before row insert trigger with systimestamp. If we did the complete refresh, all values in this column shall be changed.
CREATE MATERIALIZED VIEW paymentsInfo
ON PREBUILT TABLE
REFRESH FAST
ON DEMAND
START WITH SYSDATE
NEXT SYSDATE+5/1440
WITH PRIMARY KEY
DISABLE QUERY REWRITE AS
SELECT PAYMENT_ID,BATCH_REFERENCE, TRANSACTION_REFERENCE, NO_OF_TRANSACTIONS, DEBIT_ACC_NUM,... from payment@dblink
I want to know is there any other way to add new columns without losing any changes from the master table.
Thanks.There is no way to add new Columns to Materialized view. To add new columns, it has to be dropped and re-built again.
Extract from Oracle Documentaion:
Use the ALTER MATERIALIZED VIEW statement to modify an existing materialized view in one or more of the following ways:
To change its storage characteristics
To change its refresh method, mode, or time
To alter its structure so that it is a different type of materialized view
To enable or disable query rewrite
If you have a problem of Complete refresh, then It may be beneficial to get the backup of the MView; Drop and re-create it with modified definition; Restore the backup data leaving the new columns untouched (assuming they are to be kept as fetched from the Master site). -
Add dropdown column in Metadata properties in Search SharePoint2010
Hi all,
i have some drop-down columns in library and i need to add these column in metadata properties in search. and dose dropdown column support in search refinement panel and in advance search page xml ? also i
need to add library dropdown column in search center for filter the data on search page. is there any out of the box way to do this.
BestRegards|SharePoint TechiesHi ,
According to your description, my understanding is that you want to create custom SharePoint 2010 Search Refiners for some drop-down columns in library.
For achieving your demand, you can refer to the blog:
http://blogs.msdn.com/b/spnext/archive/2010/08/09/customising-sharepoint-2010-search-refiners.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support -
Using FK: 0balance
I need to create a Column in Query to return the following
Full Year Forecast
Forecast to the end of the financial year, variable dependent on plan selected (Q1,2,3 or 4). If select Q2,3, or 4 then use Actual figures for months until the start of the plan. Eg if select Q2 then full year forecast will be Actual for April, May and June plus Forecast for July to March.
Anyone have any ideas please?
thanksHi Smith,
You can follow following approach.
1. Create 2 KF's (KF1 & KF2) one for actual & other for Forcast (using restriction - Plan/Actual & for Quarter / Month).
2. Use variables , say VAr1 & VAR2 (with Customer Exits) to populate values for Month/Quarter (for characteristic used in restriction in step 1) .
3. Value for variables in step 1 will be populated based on value entered for variable VAR3 (this is for user entry Q1,2,3,4).
4. Create KF3 as KF1+KF2.
Regards
SS -
How to add custom columns with BO data from GP to UWL
Hi
We have CE 7.1 in our project UWL taskitems only have GP workflow tasks.
In UWL we can see that by default there are standard columns but now we need to add custom columns with data from ours BO associated to process instance
For that we need to develop one custom connector for UWL where we can retrieve the values from custom conenctor to UWL.
Currently our NWDS 7.1 does not have plugins for UWL Connector can anybody tell me where can I download this plugins?
thanks in advance!
Regards
CristianHi,
plz refer the following link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ee5047-c7a0-2a10-70b7-9557e3e4d440
Regards
Manohar -
Add New column in the Display Specification: Hit List (CGE2)
Hi,
My Scenario is to add new columns (AUTHORIZATION GROUP and CREATED BY) in CGE2 T-code.
At the hitlist of the workbench in transaction CGE2 there can be selected several columns(Ex:specification,Desc.specific.type,packing name etc), but we need to add new columns for (AUTHORIZATION GROUP and CREATED BY) for the perticular specifications.
Please let me know how to make the changes for standard things or any exists or badi's are available..
Replies would be appreciated.
Regards,
RaghavaTry to check whether there is any enhancement spot available and create a spot.
Example: sample steps for doing it.
If you are trying to modify standard program. Ex: RV60AFZZ
1) Go to SE38
2) Display program RV60AFZZ
3) Switch to Front-End Editor (New)
4) Click Spiral icon(Shift+F4) on the tool bar
5) From Menu options EDIT-->Enhancement Operations --> Show implicit enhancement options.
6) Now on the left hand corner you will see and arrow indicator where you can enhance the code. select the line example for this program Line 39, from menu EDIT--> Enhancement Operations --> create. on pop-up include the new column.
I hope above example will help you to close the thread.
Regards,
Sairam -
Add label column in applescript
I'm using snow leopard at the moment and this is a section of the script and this works, i just need to add the column label into the window.
open theFolder1
tell front Finder window
set properties to {current view:list view, position:{0, 0}, bounds:{0, 100, 400, 500}, toolbar visible:true, sidebar width:0}
set text size of its list view options to 10
close theFolder1
end tell
I've tried adding the line
set visible of column label column to true
but I get the error
error "Finder got an error: Can’t make label column into type integer." number -1700 from label column to integer
Can this be done?
Many Thanks
MattHello
As far as I can tell, visible property of Finder > column class is broken. E.g.,
tell application "Finder"
tell Finder window 1
set current view to list view
tell its list view options
--return columns -- for test
set column id label column's visible to true -- [*1] NG
end tell
--update target -- no effect
end tell
[1] This should work but does not.
The "visible" property is set to true but it has no effect in list view.
end tell
A workaround would be to use GUI scripting as follows. Tested under 10.6.5.
* In order to use GUI scripting, you need to enbale the option: System Preferences > Universal Access > Enable access for assistive devices.
tell application "Finder"
tell Finder window 1
my show_label_in_list_view(it)
end tell
end tell
on show_label_in_list_view(fwin)
reference fwin : reference of target Finder window
tell application "Finder"
activate
tell fwin
set current view to list view
end tell
end tell
tell application "System Events"
tell process "Finder"
set view_options to a reference to (window 1 whose subrole = "AXSystemFloatingWindow")
set was_open to exists view_options
if not was_open then
tell menu bar 1's menu bar item 5 -- View
tell menu 1's menu item -1 -- Show View Options
click
end tell
end tell
end if
tell view_options
tell group 1
tell checkbox 4 -- Label
if value = 0 then click
end tell
end tell
if not was_open then click button 1 -- Close
end tell
end tell
end tell
end show_label_in_list_view
Regards,
H -
Add varchar column in to Time Series Algorithm
i created a time series algoritham using numeric columns, but i need to add text columns so what we do?
plz share to me if possible to add.Hi,
Thanks a lot, it's really help...don't know why I didn't see this customized point before in SPRO.
But I have an other issue, my new fields is added in the CATS screen and now I'm trying to put default value by using the user exit of extension CATS0009.
When I complete the value of my new fields in structure CATSD_IMP, there are not taking into account and the CATS screen doesn't display the value.
Am I using the wrong table ? wrong user-exit ? or my code ..
Thansk a lot again for your help.
Fanny GROUX
Maybe you are looking for
-
I can not get some of my pictures on I photo to come up in a slide show or enlarge them the screen just turns black with a big explanation mark where the picture should be...as soon as I take it bak down it shows up in my photo line up how do I get
-
Change slide duration to 2.5 seconds??
Is it possible to change the duration of a slide to 2.5 seconds in imovie08. I keep trying, but it seems to make it go to 4 seconds rather than 2.5. 2 seconds is a little too fast and 3 makes my slide show a bit too long. I have also changed the dura
-
I have a Mac OS X version 10.6.8 bought in 2010. When uploading and downloading stuff my computer is all of a sudden slower than usual. The rainbow disc is always appearing and I have to sit and wait for items to finally pop up! Can someone help m
-
How do I get youtube videos to play
Hi I'm unable to play youtube videos on my phone. I get the message 'an error has occurred' I'm on the giffgaff network and its been suggested that it's because they can't send the service book for youtube. Is there a way around this please without m
-
Large Scale Digital Printing Guidelines
Hi, I'm trying to get a getter handle on the principles and options for creating the best large and very large scale prints from digital files. I'm more than well versed in the basics of Photoshop and color management but there remain some issues I'