Need to align af:quick query
Hi!!
I am using jdeveloper 11.1.1.5
I had created an af:form using employeeVO. I had also created an af:quickquery by dragging and dropping all Querryable attribute
In af:quickquery the dropdown menu is little down than textbox. I need to be in same line.
pls verify the link if i am not clear
http://www.4shared.com/photo/rNz1rsBu/E049.html
Hi,
can' access the image (probably a network problem on my side). Can you test with different browser types to check if this is browser specific?
Frank
Similar Messages
-
hi,
I am using quick query component. There is any way to show in the combo box of the quick query component only some and not all fields, because I do not need to display all.
Please..Vane,
If you're using ADF Business Components - I believe you can do this by creating a named view criteria on your View Object and then dragging-and-dropping the named view criteria on to the page as an af:quickQuery - haven't tested this personally, though.
A really quick test - no more time today - seems to show that named view criteria can create an af:query, but I didn't see af:quickQuery as an option...
Time to read the Fusion Developer's Guide, I guess.
John -
How to implement Quick Query and Saved Searches in ADF?
We are using 11gR2 ADF.
The requirement is to enable Quick Search and save the Searches.
In the Oracle ADF documentation, it is mentioned that
- Create a view with view criteria named.
- In the .jspx drag and drop the view criteria and Select Quick Query
Upon doing the above, we see that a Search panel is getting created, but with a message 'No Search Fields Added'.
In the named view criteria, Under 'UI Hints' we have set
-- execution mode as Both
-- Search region mode is Basic
-- Show Operators in Basic
Under 'Criteria Definition'
the attributes are added in a group with OR condition.
Thanks for your reply. Oracle ADF developer guide does not help!!
If you have any other documentation that helps in implementing this Quick Query and Saved Search, your help is greatly appreciated.Set the following on your af:query component
SaveQueryMode = hidden
ModeChangeVisible = false
This should work for you ..
Regards, -
IN NEED OF A SCCM 2012 QUERY THAT SHOWS LAST TIME SOFTWARE WAS USED OR OPENED
Hello
I am in need of an SCCM 2012 query that shows PCs that have Visio , Adobe Professional and Visual Studio and the last time each was used or opened. I have the query below which give me the PC name and the product. Any assistance will be very helpful
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%adobe acrobat%pro%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%viewer%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service pack%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security
update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hydra%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%MUI%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%amd%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%microsoft visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%vision%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%add-in%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
= "Microsoft Visual studio 2012 devenv" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hotfix%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service%"Did you create a software metering rule for each software title? if not then you need you do that first and it will take over a week before you see results.
Also keep in mind that your query will only find x86 software titles.
http://www.enhansoft.com/ -
I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem
I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem
-
How to customize quick query to search with SQL in contain keyword
I want to build simple query using quick query component. But it will search with SQL equal keyword. How can I customize it to use contain keyword instead. That means, I enter 'sc' to return 'scott'.
Not sure if the technique described here http://tompeez.wordpress.com/2011/08/21/extending-viewcriteria-to-use-sql-contains-4/ can be used for quick query, but you can try ...
Timo -
Need a record from second query which is not a part of main query.
I have this Query which Leads me to two Rwos of Data
select papf.employee_number E_CODE
,to_char(paaf1.effective_start_date,'DD-MON-RRRR') EFFECTIVE_START_DATE
,DECODE(to_char(paaf1.effective_end_date,'DD-MON-RRRR'),'31-DEC-4712',NULL,to_char(paaf1.effective_end_date,'DD-MON-RRRR')) EFFECTIVE_END_DATE
,TRIM(SUBSTR(PAAF1.ASS_ATTRIBUTE21,INSTR(PAAF1.ASS_ATTRIBUTE21,'-')+1)) PREVIOUS_CO
from apps.per_all_assignments_f paaf
,apps.per_all_people_f papf
,apps.per_grades pg
,apps.per_jobs pj
,apps.per_person_types ppt
,apps.per_person_type_usages_f pptuf
,apps.per_all_assignments_f paaf1
where 1=1
and papf.person_id = paaf.person_id
and pptuf.person_id = papf.person_id
and pptuf.person_type_id = ppt.person_type_id
and ppt.user_person_type = 'Employee'
and papf.current_employee_flag ='Y'
and paaf.primary_flag = 'Y'
and paaf1.primary_flag = 'Y'
and paaf1.grade_id = pg.grade_id
and paaf1.job_id = pj.job_id
and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
and trunc(sysdate) between pptuf.effective_start_date and pptuf.effective_end_date
and papf.person_id = paaf1.person_id
and (TRIM(UPPER(paaf1.ass_attribute24)) <> TRIM(UPPER(paaf.ass_attribute24))
OR TRIM(UPPER(paaf1.ass_attribute21)) <> TRIM(UPPER(paaf.ass_attribute21))
OR TRIM(UPPER(paaf1.ass_attribute22)) <> TRIM(UPPER(paaf.ass_attribute22))
OR TRIM(UPPER(paaf1.ass_attribute25)) <> TRIM(UPPER(paaf.ass_attribute25))
OR TRIM(UPPER(paaf1.ass_attribute23)) <> TRIM(UPPER(paaf.ass_attribute23))
OR paaf1.grade_id <> paaf.grade_id)
and paaf1.effective_end_date = paaf.effective_start_date - 1
and papf.employee_number in ('10620')
and paaf1.effective_start_date >= '01-JAN-1950'
---------------------------OUT PUT-----------------------------
E_CODE EFFECTIVE_START_DATE EFFECTIVE_END_DATE PREVIOUS_CO
Row1 10620 17-SEP-2009 30-NOV-2009 CORPORATE
Row2 10620 19-NOV-2007 31-JAN-2008 CORPORATE
Problem is enire output of the query is perfectly fine but in the second row at column effective_start_date insted of 19-NOV-2007 in need a value from another query. there must not be any change in rest of the columns data including first row.
i.e select ORIGINAL_DATE_OF_HIRE from per_all_people_f
where employee_number = '10620'
and rownum < 2
---------------------------OUT PUT----------------------------
15-MAY-2006
Is there is any approach to get this thing.
Thanks in advance
Bachan.
Edited by: Bachan on Sep 20, 2010 8:17 PMmaybe a union for your second row.
select E_CODE,
EFFECTIVE_START_DATE,
EFFECTIVE_END_DATE,
PREVIOUS_CO
from (select rownum rn,
papf.employee_number E_CODE
,to_char(paaf1.effective_start_date,'DD-MON-RRRR') EFFECTIVE_START_DATE
,DECODE(to_char(paaf1.effective_end_date,'DD-MON-RRRR'),'31-DEC-4712',NULL,to_char(paaf1.effective_end_date,'DD-MON-RRRR')) EFFECTIVE_END_DATE
,TRIM(SUBSTR(PAAF1.***_ATTRIBUTE21,INSTR(PAAF1.***_ATTRIBUTE21,'-')+1)) PREVIOUS_CO
from apps.per_all_assignments_f paaf
,apps.per_all_people_f papf
,apps.per_grades pg
,apps.per_jobs pj
,apps.per_person_types ppt
,apps.per_person_type_usages_f pptuf
,apps.per_all_assignments_f paaf1
where 1=1
and papf.person_id = paaf.person_id
and pptuf.person_id = papf.person_id
and pptuf.person_type_id = ppt.person_type_id
and ppt.user_person_type = 'Employee'
and papf.current_employee_flag ='Y'
and paaf.primary_flag = 'Y'
and paaf1.primary_flag = 'Y'
and paaf1.grade_id = pg.grade_id
and paaf1.job_id = pj.job_id
and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
and trunc(sysdate) between pptuf.effective_start_date and pptuf.effective_end_date
and papf.person_id = paaf1.person_id
and (TRIM(UPPER(paaf1.***_attribute24)) TRIM(UPPER(paaf.***_attribute24))
OR TRIM(UPPER(paaf1.***_attribute21)) TRIM(UPPER(paaf.***_attribute21))
OR TRIM(UPPER(paaf1.***_attribute22)) TRIM(UPPER(paaf.***_attribute22))
OR TRIM(UPPER(paaf1.***_attribute25)) TRIM(UPPER(paaf.***_attribute25))
OR TRIM(UPPER(paaf1.***_attribute23)) TRIM(UPPER(paaf.***_attribute23))
OR paaf1.grade_id paaf.grade_id)
and paaf1.effective_end_date = paaf.effective_start_date - 1
and papf.employee_number in ('10620')
and paaf1.effective_start_date >= '01-JAN-1950'0
where rn = 1
union all
select employee_number E_CODE,
ORIGINAL_DATE_OF_HIRE,
EFFECTIVE_END_DATE,
TRIM(SUBSTR(PAAF1.***_ATTRIBUTE21,INSTR(PAAF1.***_ATTRIBUTE21,'-')+1)) PREVIOUS_CO
from per_all_people_f
where employee_number = '10620'
and rownum < 2note: untested -
Oracle ADF - Refresh quick query for a table in the pop up.
Hi,
I am using Oracle jDev 11.1.1.4.0
In my application I have a Find button in jspx.
Onclick of Find button, a popup opens.
When I search for a record by name in QuickQuery, suppose - I entered name as jon.
It gives me the correct result.
Now when I close the pop up and again click on Find button, that previous search remains as it is in the pop up
and also the previous criteria in quick query search region as "jon".
I have changed the refresh property of iterator(of table in popup) in pageDef
But still not working...
How to refresh that search region for every subsequent Find click.
Appreciate your help.
Thanks,
Madhavdo u changed refresh > ifneeded or always.
user.
r u luking for partially page rendering.
by using ppr. we can refresh.
if so.
http://www.adftips.com/2010/10/adf-ui-refreshing-page-or-region.html
http://biemond.blogspot.com/2007/11/how-to-refresh-region-in-jdeveloper-11g.html
Re: ADF Region Interaction
Edited by: Erp on Sep 27, 2011 4:37 AM
Edited by: Erp on Sep 27, 2011 4:42 AM -
Need Help! Ad Hoc Query in HR Tables
Dear Friends,
I need to create a adhoc query for the following tables.
PA*
HRP1000
HRP1001
But I could select only PNPCE LDB... I do not know how to define one and get the information out from PA* and HRP1000 and HRP1001 info types....
Please help.
Thanks,
JoyHi Joydip,
Go to transaction SQ02, from the Edit menu go to "Change Infotype Selection" step. Go to the end of the tree structure. From "Infotypes of related objects" select the respective organizational object (e.g. org unit, position) & respective relationship. When you click on these items & confirm your selection, they all apeear in the infotype tree structure at the left part of the SQ02 screen. You can use them just like other info types of PNPCE logical DB.
Regards,
Dilek -
Daily morning 8 o clock , we need to execute a select query
Hi,
daily morning 8 o clock , we need to execute a select query.
How we can do this using dbms_scheduler? or any other ways?
db version : 10g
Thanks,
Kumar.
Message was edited by:
user548258Use daily and byhour parameters as shown in below link.
http://www.dba-oracle.com/t_dbms_scheduler_examples.htm -
I have a view with columns and data like:
UNIT STATUS CASES
001 complete 38
001 on-going 32
001 total 70
002 complete 10
002 on-going 47
002 total 57
Can anyone give me a quick query to make the report as:
UNIT Comlete on-going total cases
001 38 32 70
002 10 47 57
ThanksSQL> -- generating sample data:
SQL> with t as (
2 select '001' unit, 'complete' status, 38 cases from dual union all
3 select '001', 'on-going', 32 from dual union all
4 select '001', 'total', 70 from dual union all
5 select '002', 'complete', 10 from dual union all
6 select '002', 'on-going', 47 from dual union all
7 select '002', 'total', 57 from dual
8 )
9 --
10 -- actual query:
11 --
12 select unit
13 , max(case when status = 'complete' then cases end ) "complete"
14 , max(case when status = 'on-going' then cases end) "on-going"
15 , max(case when status = 'total' then cases end) "total"
16 from t
17 group by unit
18 order by unit;
UNI complete on-going total
001 38 32 70
002 10 47 57
2 rows selected. -
How to create quick query region?
Hi,
How to create quick query region?
I have got some tip from OAF developer guild:
OAPageLayoutBean pageLayout = pageContext.getPageLayout();
pageLayout.setQuickSearch(quickSearchRN);
But I don't know how to create 'quickSearchRN'.
So, I try to create a stacklayout region as quickSearchRN, and add it into pageLayout.
But there are two stacklayout region displayed. One in qucik query region, other in main region.
please give me some sample code.OAFlowLayoutBean quickQueryRN = (OAFlowLayoutBean)createWebBean
(pageContext,OAWebBeanConstants.FLOW_LAYOUT_BEAN, null, "QuickQueryRN");
OAMessageTextInputBean condition = (OAMessageTextInputBean)createWebBean
(pageContext,OAWebBeanConstants.MESSAGE_TEXT_INPUT_BEAN, null, "condition");
condition.setPrompt("Name");
quickQueryRN.addIndexedChild(condition);
pageLayout.setQuickSearch(quickQueryRN); -
hello there. just a quick query on SQL. I have 4 simple tables in a spatial database each with one geometry column called geom. each table has a different number of tuples in it, i.e.
city_table has 195 point geometries
county_table has 3230 polygon/multipolygon geometries
state_table has 56 polygon/multipolygon geometries
roads_table has 239 linestring/multilinestring geometries.
Is there a single SQL command that one can use to retrieve all the data from the geometry column of all tables?
e.g. Select a1.geom, a2.geom, a3.geom, a4.geom from city_table a1, county_table a2 ...
Or is it a case of sending 4 individual select statements, one to each table, to retrieve the geometries from that table?Joe:
I would assume that each of the 195 cities is in one of the 3230 counties. The county_id column would contain the id from the county table for the appropriate county.
In my neck of the woods, the City of Kitchener (say city_id 123) is in Waterloo County (say county_id 2950). So, the cities table record would look like:
city_id 123
city_name Kitchener
county_id 2950
and the counties table like:
county_id 2950
county_name Waterloo
So, I coulr query:
SELECT c.city_id, c.city_name, cn.county_name
FROM cities c, counties cn
WHERE c.county_id = cn.county_id and
c.city_id = 123
and get
123 Kitchener WaterlooHTH
John -
Quick query component without dropdown
Hi,
I am using quickquery component on ADF Tree table .. I want to display quick query without the dropdown in its layout..I want to display only Label, InputText and search button.
how can I achieve this?
Thanks,
SwathiHi,
Check
http://blog.applegrew.com/2012/02/adf-super-code-snippets/ -
Dashboard quick query limit component
Hi All,
I am using quick query limit in a dashboard...
I set it up ok in the ESM file... everything is working as advertised, BUT when I create the runtime version everything from the component disappear... the query panel button in the other frames is missing , the runtime dashboard doesn't start from the query panel even if it's defined in the dashboard properties as the startup frame...
I tried to build the runtime version from the quick query limit sample and I noticed the same behaviour, there is some hidden flags in building the runtime version?
I'm using version 9.3.1.0.0.248 on Vista
TIA & best wishes
GianlucaHi,
Check
http://blog.applegrew.com/2012/02/adf-super-code-snippets/
Maybe you are looking for
-
Installed Windows 8 on a late 2011 MacBook Air and was working fine now keyboard not working so cannot enter password? Caplocks key works but I am locked out on my own PC and cannot seem to get it to recognize built in keyboard,bluetooth,generic USB
-
F11 and ctrl+F11 not retrieving the last search
I have created a form in oracle 10g.where F11 is enter-query and ctrl+F11 is execute-query. Every time its working fine.When ever I give any input and press ctrl+F11 its being executed and then if I press F11 then going to enter-query mode. But my pr
-
I created a partition og 100 GB to install WINDOWS 7, but didnt install it later, tried to merge it back but it didnt work. the 100 GB partition is now invisible. Please suggest me how to get the partition merged back.
-
Make check box activate a calculation
Hello I have a question about forms and calculations. I have the following problem. I have a grand total which is setup to sum my fees column. It works fine. My fees column is multi line. I had it setup to calculate hours multiplied by hours wor
-
Please ignore this post.i have put it in Business object section Regards, anirban