Need to check XI 3.0 has been installed properly or not on PC?

Hi,
I have installed XI 3.0 on my PC with the help of BASIS people.
I want to check whether the XI has been installed properly or not.
Can anyone please let me know how to check this?
Regards,
Bala Raja

Hi Bala,
There are few things you can check.
1. run SLDCHECK tcode. There should be no error.
2. Check http://hostname:50000/rep is coming up successfully.
3. Login to ID/IR/RWB
This is what I can think of initially to check the system.
-Pinkle

Similar Messages

I can't tell if my AdobePro software upgrade has been installed properly. Doesn't seem to be working, so what do I do?

How can I tell if my AdobePro upgrade has been properly installed?

Thank you, but I am not good enough at uninstalling and reinstalling apps to be certain I won’t completely mess up what I already have. Do you know if there is a way to get online support directly from Adobe? I am in the middle of a very important project and can’t risk losing the use of Adobe as I had it before attempting to upgrade.
Thank you. Really appreciate that you responded to my inquiry.
Amy
Amy M. Fadida
President & CEO
A.M. Fadida Consulting
2006 Plymouth Street, NW
Washington, DC 20012
tel: 202-744-5531
fax: 202-722-2798
e-mail: <mailto:[email protected]> [email protected]

How to check whether database console has been installed on Windows or not?

I selected the following choices when I ran Oracle Database 11g Release 2 Installer on Windows 2008 R2:
Create and configure a database
Server Class
Single instance database installation
Typical install
I got the Database Configuration Assistant: Warning
Enterprise manager configuration failed due to the following error - Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again.
I have started the listener and register database service now. I have tried to run the command:
emca -config dbcontrol db -repos create
I got the error sysman already exists.
Does it mean that even though I got the Warning message, the Enterprise Manager repository has already been created?
What should I do to bring up the database console?
Thanks.

I did not see any EM DB Console service.
I believe SYSMAN is the default schema for the EM repository. So, I think I just need to configure EM not to create EM repository.

Old computer died and I am trying to install Illustrator CS5 on new computer. Last version I had before CS5 was/is Illustrator 10, which has been installed in new computer. CS5 install says I need CS2,3, or 4 before installing 5, but old computer went dir

Old computer died and I am trying to install Illustrator CS5 on new computer.
Last version I had before CS5 was/is Illustrator 10,which has been installed on new computer.
CS5 install says I need CS2,3 or 4 before installing 5, but old computer went directly from 10 to CS5.
How can I repeat this 10 to CS5 install?

It does not seem likely that CS6 was upgraded from version 10. You might want to check your purchase history in your Adobe account to see if there is some missing link in the chain of purchases you made.
You can always try contacting Adobe support thru chat to see if they can find information or otherwise assist you in this matter.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Im trying to get some purchased songs to sync onto my ipad, but when i try it says they could not be synced as i need to authorise my computer which has been done already but its still not syncing them can someone help please?

Im trying to get some purchased songs to sync onto my ipad, but when i try it says they could not be synced as i need to authorise my computer which has been done already but its still not syncing them can someone help please?

Hello there, Gemss.
The following Knowledge Base article offers up some great recommendations for the issue you're describing:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Although all of the scenarios may be applicable, many folks find that the following section helps resolve their issue most often:
Authorize using the correct account name
The items you're trying to play might have been purchased using a different iTunes Store account. To determine which account was used to purchase an item, follow these steps:
Select a purchased song in your library and choose File > Get Info.
Click the Summary tab. Note the Account Name that appears in the list. This is the account name (Apple ID) you'll need to use when authorizing your computer to play this purchase.
Note: The account name that appears is the one you used when purchasing the item and does not change if the account name (Apple ID) changes.
If you've authorized the Apple ID that is shown in the Summary tab, you can check the purchase history for that Apple ID from Store > View My Account. If your purchase history does not reflect the purchase of the items in your iTunes library, consider any other Apple ID you may have created, and authorize the computer for your additional Apple ID.
If you forgot the password to one of your accounts, you can recover it using Apple's password-recovery website.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Check if a DSO has been lookup by other DSO/cube in start/end routine

I have to support on of the client system which I am not part of the development.
I found one DSO has been schedule to load data in daily process chain but it is not update to any target.
Is it possible to check if this DSO has been using in the staging i.e look up the reference field by other cube/DSO in start or end routine ?

Hi,
Possible by invoking respective field into code part.
I think not much stuff required in this regard.
Thanks - RK

When I run an Utilities check on the HD. I always get a prompt-SUID System/Library/CoreS has been modified and will not be repaired. how can i access this to be repaired. Most files are corrupted by messages that they are one thing but should be another

When I run a system utilities check and select HD. i always get a prompt the the SUID System/Library/CoreS has been modified and will not be repaired. How can I access this file so that I may repair it? Left unrepaired . There are a lot of files that do not have the correct code. They are one thing but should be another

Hello there, toestothenose.
It seems that you may not have gotten the entire message into your thread here, but the following Knowledge Base article offers a good resource on which messages from Disk Utility's Repair Disk Permissions can be safely ignored:
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
http://support.apple.com/kb/ts1448
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to check whether MRP run has been executed for a sales order or not

Dear Experts,
In Strategy:20, Make to Order scenario, I have run MRP for sales order in T Code:MD50,
then how can I check whether MRP run has been executed for a sales order or not. Is there any report where I can find some indication?
Thanks and regards,
Vikas

Dear,
In MTO scenario with Planning strategy group 20 in material master .
After sales order is created, Run MRP , then planned order will be created then go to planned order details in MD04 or MD12 you will get sales order number in assigment tab.
or check the Table PLAF field PALTR ,and field name KDAUF its sales order, for all created planned order.
Regards,
R.Brahmankar

How do I check my email which has been sent to my apple ID

How do I check my emai; which has been sent to my apple ID. If I to mail on my settings, it says icloud account is not verified. Idf I go to mail, only my msn.com emails show up

Apple ID ( username) is set at apple.com. If I try to change it to my msn account, it says it is already in use and cannot be done

Identify USAGE TYPE that has been installed in the system

Hi All,
I have a newly upgraded BI system. I need to check what are all the USAGE types that has been installed in the system. How to verify the same (without asking the basis person). Is there any system parameter or transaction which would give the usage type installed.
Points would be assigned for useful answers.
Thanks,
Vidhya.A

Hi Vidhya,
In BI the designtime and runtime of webtemplates use BI-JAVA usuage type.similarly for Formatted reporting too it uses BI-JAVA.see if you can successfully create a new webtemplate and can execute it,if you can then they had deployed dual stack in ur system.u can also check in Tcode SICF to see if web services are on.let me know if that helps
Regards
Chandru

Object has been disconnected or does not exist at the server

Hi,
I have a report which had run daily without any problem for months. Now it stops after quite a lot of time with error: 'object .rem has been disconnected or does not exist at the server'.
I have checked the dataset queries and the parameters, and everything is fine. I changed the timeout for the report as well, but it did not help either. I don't use a hidden object.
Could anyone tell me what's happening?
Many thanks.
P.

I'm using 2008. I had thought the bug was fixed in it during the past 4.5 years.
And what is a 'bad default'? And how come that the report worked for a long time without problems? If it is a known bug, it should have prevented proper running from the beginning.
Hi Pelso,
This issue has been fixed in SSRS 2008R2. If you need to fix this issue in a previous release of Reporting Services, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com),
so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support

Flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC

Office 2013 KMS Activation Issues When Outlook 2010 Has Been Installed

Hi Everyone,
I have been looking everywhere for the answer to this question. I have been setting up a KMS server host for Office 2013 on Server 2012 R2. The issue I have ran into is that all of our computers currently have Office 2010 installed. Our Office 2013 KMS server
is installed on a different server than the KMS server that activates Office 2010. (Different Virtual Machine) If Office 2010 has been installed the KMS server will not activate with the upgrade to 2013. Troubleshooting below:
1. Leave office 2010 installed and simply click upgrade - did not work.
2. Completly uninstalled Office 2010 and tried ospp.vbs /act and ospp.vbs /act - did not work.
3. Completly uninstalled Office 2013 with all other versions of Office 2010 uninstalled. Did a fresh install of Office 2013 after a reboot and verified working.
Can anyone explain to me either why this is happening as well as a solution. I realize that I have a work around right now but it takes some time.

So, you have 2 KMShosts?
Host_A is KMShost for OFF2010
Host_B is KMShost for OFF2013
Are both hosts published in DNS?
(check with: nslookup -type=any _vlmcs._tcp)
Clients can resolve and connect to both hosts?
Or are you using static KMS location (do you manually configure your KMSclients to a specific hostname or IPaddress)?
Typically, a KMSclient will perform discovery via DNS lookup, and will try each KMShost until success occurs.
Possibly, when you installed WS2012R2, you chose ADBA instead of KMS ? (check the VA role on this server to confirm the mode)
You can check upon the KMShost, execute: cscript slmgr.vbs /dlv all
Another option, might be for you to co-host OFF2010 KMS and OFF2013 KMS upon the same (new WS2012R2) server, and de-commission the old KMShost function including removal of the DNS record for it. (Assuming this is consistent with your plans)
Example for OFF2013 ADBA:
http://blogs.technet.com/b/odsupport/archive/2012/11/07/how-to-setup-active-directory-based-activation-host-for-microsoft-office-2013.aspx
Example for OFF2013 KMS:
http://blogs.technet.com/b/odsupport/archive/2012/11/07/how-to-setup-kms-activation-host-for-microsoft-office-2013-on-windows-server-2012.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

BT believe my broadband has been installed but it ...

Hi all,
I'm in a frustrating situation at the moment where BT believe that my Infinity 2 Broadband has been installed when it has not been installed. I am currently being charged for Broadband and am unable to book an appointment for anyne to fit my Broadband. Furthermore, the call centre and online chat people do not appear to know anything about Infinity and the white fibre modem. This is the story so far:
I moved house on the 20th Febraury and booked an appointment a week later to have my broadband installed. I get my appointment for the 5th March for the install. It's a little bit of a wait but I'm fine to hold out for the 8 days.
On the 5th March, the BB engineer arrives, he's clearly one of the contractors I've heard so much about! I'm not fussed, I see no reason why this should be anything other than a routine job. After about 30 minutes of firendly chat and a few trips by the engineer to the curb and back, he informs me that the phone line is not working. In his words, "Your line is activated on the system and I can see it in the cabinet in the street, but it's not coming in to the flat, at least not through this socket.". "Can you fix it?" I ask naively. "Nah, I only deal with the broadband install, I can't touch the line!". I'm frustrated but I understand it's not his fault. Perhaps my disappointment was evident and shared by the contractor as he informed me, "I'm as annoyed as you are, I don't get paid unless I can mark the job as complete!". In a brief conversation following this, I found out the company he worked for was "Quinn" something and that he would raise the fault for me on the line so that someone could come and fix that.
Although frustrated at this point, I had no problems with the contractor, he seemed fair and his explanation of both the problem and his inability to resolve it seemed fair.
It turned out he did not raise the fault so I raised the fault on the line myself through the website when I returned to the office. The very next day, BT sent me a text saying that my Broadband had been activated. I log in to the website and see the fault I have raised on the line next to a bill for £20 - my first month's broadband charge. My assumption at this point is that the contractor either deliberately closed the job he had for my broadband as completed or accidentally did so (I believe a responsible contractor would have corrected the latter mistake).
So the engineer to fix my line was due on the 7th before 1pm. I take another half day off work and sit and wait. I hear literally nothing from BT all day and by 14:30 I give up and go to work. I call the team in India to reschedule and they assure me this time that he will come on the 8th before 1pm. To avoid me waiting in and missing more work, the lady on the phone says she will inform the engineer to call me 30 minutes before he arrives at my house so I can make my way there in time (I work 20 minutes away). On the 8th, in the middle of a meeting, I get a call from a BT engineer asking me how to operate the gates to the flats. "Oh. You're already there?" I ask. "Yeah, are you not in?" he replies. "No, I was told you would call me 30 minutes before so I could get back there to let you in!". "Well I can't wait 30 minutes mate, I'll just have to sit here for 15 and then mark the job as unable to complete.". Somehow, we mutually agree that if I ca get home in 20 minutes, the engineer will wait for me to let him in. Luckily I make it inside 15 anyway and let him in.
This guy is from OpenReach and I have to say, despite what might have been a bad start, he was nothing but professional in doing his job and explaining the problems as he went along. It may have taken around an hour, but eventually my phone line was up and running. Regardless of my experience with the Broadband guy, this is the level of service I would expect when I have a problem with a service provider.
So now here I am. It's the 11th following a weekend where I failed to visit my mother for Mother's Day whilst simulataneously using it as an excuse to get nothing done at home, including calling BT. I have just made that call where I soent 5 minutes struggling to communicate with one woman who decided that my Broadband had been installed and maybe I just needed help plugging it in. I'm seeing the funny side and after explianing several times what has happened, I get put through to "Level 2" (sounds like I'm playing a game!). The Level 2 person has a faulty headset which means that the most important word in each sentence is completely replaced with white noise. I feel a little embarrassed that I have to ask her to repeat everything. She then seems to identify the problem and apologises multiple times for the errors on BT's part as she types furiously on her keyboard (I'm not sure if it was furious but I can hear it through the dodgy headset). For some reason I'm transferred to my mobile where she calls me (it's convenient and I'm sure the reason was explianed behind the white noise somewhere) and after a wait littered with apologies, I am asked to hold on while she just...
...and then there's silence. Silence broken only with me saying "Hello?" multiple times in many different ways. After about 90 seconds, I explain that I can't hear anything (in the hope someone is hearing but not able to speak back) and that I'm going to hang up.
And that's when I decided to write this post, whilst waiting for the call back. It hasn't come. I'll keep you all posted but in the meantime it would be nice to know where I can send a letter to voice my frustration and also how I can get my money back for the Broadband that I am still unable to use.
Thanks!
Dan

If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to help you.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Need to check XI 3.0 has been installed properly or not on PC?

Similar Messages

Maybe you are looking for