How to check whether database console has been installed on Windows or not?

I selected the following choices when I ran Oracle Database 11g Release 2 Installer on Windows 2008 R2:
Create and configure a database
Server Class
Single instance database installation
Typical install
I got the Database Configuration Assistant: Warning
Enterprise manager configuration failed due to the following error - Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again.
I have started the listener and register database service now. I have tried to run the command:
emca -config dbcontrol db -repos create
I got the error sysman already exists.
Does it mean that even though I got the Warning message, the Enterprise Manager repository has already been created?
What should I do to bring up the database console?
Thanks.

I did not see any EM DB Console service.
I believe SYSMAN is the default schema for the EM repository. So, I think I just need to configure EM not to create EM repository.

Similar Messages

  • How to check whether MRP run has been executed for a sales order or not

    Dear Experts,
    In Strategy:20, Make to Order scenario, I have run MRP for sales order in T Code:MD50,
    then how can I check whether MRP run has been executed for a sales order or not.  Is there any report where I can find some indication?
    Thanks and regards,
    Vikas

    Dear,
    In MTO scenario with Planning strategy group 20 in material master .
    After sales order is created, Run MRP , then planned order will be created then go to planned order details in MD04 or MD12 you will get sales order number in assigment tab.
    or check the Table PLAF field  PALTR ,and field name KDAUF its sales order, for all created planned order.
    Regards,
    R.Brahmankar

  • How to check whether an invoice has been paid or not?

    Hi,
        In FI, how should I check whether an invoice is paid fully and also whether it has any residual item?
    And how should I pay an invoice with some residue? Which transaction I should use and what are the steps to do that?
    Since I'm new to FI, any guidance will help me a lot...
    Thanks,
    Priya.

    Hi Priya,
    you create a posting with residual items as follows:
    <b>Incoming payment</b>
    1. Start transaction F-28
    2. Enter all required information and click on <i>Process open items</i>
    3. On the next screen click on the tab <i>Res. items</i>
    4. Make sure that only the items that you want to pay are highlighted ((Net amount appears in blue)
    5. For each line item enter the residual amount that is still to be paid (Example: you have one invoice over 100 USD and 80 USD are paid, you enter 20 USD, since this is your residual that still needs to be paid)
    6. Save
    <b>Outgoing payment</b>
    1. Start transaction F-53
    2-6. is identical to incoming payment
    Regards,
    Claus

  • Need to check XI 3.0 has been installed properly or not on PC?

    Hi,
    I have installed XI 3.0 on my PC with the help of BASIS people.
    I want to check whether the XI has been installed properly or not.
    Can anyone please let me know how to check this?
    Regards,
    Bala Raja

    Hi Bala,
    There are few things you can check.
    1. run SLDCHECK tcode. There should be no error.
    2. Check http://hostname:50000/rep is coming up successfully.
    3. Login to ID/IR/RWB
    This is what I can think of initially to check the system.
    -Pinkle

  • How to check whether a Oracle server is installed or not ?

    Hi,
    How cani check whether a Machine has oracle server installed or not ?
    I have a machine where i have the client tools installed but not server. In that case how can i check whether this machine has oracle server is installed or not?
    Thanks in Advance..

    user11000236 wrote:
    Hi,
    How cani check whether a Machine has oracle server installed or not ?
    I have a machine where i have the client tools installed but not server. In that case how can i check whether this machine has oracle server is installed or not?
    Thanks in Advance..http://tinyurl.com/ngunhv
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com
    [Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

  • How do I know what Opatch has been installed on OBIEE 11.1.1.6.2?

    Hi,
    I started working with new client and someone does obiee upgrade to 11.1.1.6.2. now users got some issue and we identified that issue can be resolved if we apply a patch and to apply that patch it is saying please make sure you have installed pre requisite patch with some number. how do I know what Opatch has been installed on OBIEE 11.1.1.6.2?
    any command or file available?
    Edited by: JV123 on Feb 14, 2013 2:48 PM

    Check this
    http://www.cool-bi.com/CMDline/DeterminingCurrentPatchLevels.php
    If helps mark

  • How to check whether a file exist in the program folder or not?

    Hi guys,
    how to check whether a file exist in the program folder or not? Let is say i recieve a file name from user then i want to know if the file is there not and act on that base.
    abdul

    Look at the class java.io.File and the .exists() method:
    http://java.sun.com/j2se/1.4/docs/api/java/io/File.html

  • How to check whether the system has eclipse environment: urgent

    Hi gurus
    can you please tell me how to check whether my crm system has eclipse envirionment.
    Thanks
    shashi

    There is no way to check whether a system is used productively or not, I believe what you mean is checking a client is productive or not in an ABAP-stack based system. Remember although a SAP ABAP system is identified by a SID but from a business perspective the system is recognized by a client, as it is a unique business identity.
    Thus, to check whether the client is productive or not in txn SCC4 check the role of the client, it will show you the correct status. The data of SCC4 is stored in table T000, you can also opt to check that.
    - Regards, Dibya

  • How to check whether the user has a certificate or not?

    Hi everyone.
    We're currently finishing a web project and the last step is to check whether users accessing the application have a valid certificate or not.
    Users with a valid certificate can access all the data. Users without any certificate installed on their browsers may still proceed, but they won't be able to see all data. Please note that the lack of a certificate doesn't mean an error - it's just another use case.
    Is there any way to check whether users have a certificate installed on their browsers?
    Thanks in advance.
    Edit: sorry, I forgot to post some tech details. We're using Struts 1.2 on a Tomcat 5 app server.
    Message was edited by:
    advaca

    I am not sure how Tomcat handles this, but you need to use two-way (mutual authentication) request but not enforce SSL between Tomcat and the client browser. This will make the browser prompt the user for the cert they want to send. Then you'll need to tackle the other part of your problem, getting the correct content displayed depending on whether the user sent a cert or not. I'm even less help there than I was on the first part of your question.
    So, yeah - good luck with that
    Lee

  • Standard Report check whether Goods Issue has been performed for DN

    Hi All,
    My users is having a list of DNs where they would like to check if Post Goods Issue has been performed for them.  I would like to ask is there any standard reports as to check if a Delivery Note has PGI performed?
    I have tried report VL06G but in this report we cannot give the DN No. as the key. 
    Thanks.

    There is no standard reports to check GI by DN number.
    You have to find out the Outbound Number first then check by Outbound number.
    In SE16N, key VBFA table
    Pump in your DN number under "Follow-on doc."
    Under "Prec.doc.categ." select "J".
    with the outboud number, you can proceed to check using above report suggested.
    Alternatively, using same VBFA table. Pump in list of outbound number under "Preceding Doc." and select "Subs.doc.categ." as "R".
    If you can set-up query reports, you can also get all the information directly with the DN Numbers.

  • How to identify whether Technical Content is been installed or not?

    Hi all,
    Can anyone let me know how to identify whether technical content in BW 3.5 is been installed or not?
    thanxs
    haritha

    Hi Haritha,
    Check this PDF,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
    And this link also,
    http://help.sap.com/saphelp_nw04/helpdata/en/e5/2d1e3bd129be04e10000000a114084/frameset.htm
    Hope this clears your doubt...

  • How to know what database components have been installed on my database?

    How to know what database components that have been installed on my database using SQL*PLUS tool? (10g 10.2.0)
    Edited by: frank.qian on Nov 8, 2008 10:55 PM

    Hi..
    >
    SQL> select comp_name,comp_id,version,status from dba_registry;
    select comp_name,comp_id,version,status from dba_registry
    The error on the first line:
    ORA-00942:The table or view not exis.
    >
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
    PL/SQL Release 10.2.0.4.0 - Production
    CORE    10.2.0.4.0      Production
    TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - Production
    sys >desc dba_registry
    Name                                                                                                      Null?    Type
    COMP_ID                                                                                                   NOT NULL VARCHAR2(30)
    COMP_NAME                                                                                                          VARCHAR2(255)
    VERSION                                                                                                            VARCHAR2(30)
    STATUS                                                                                                             VARCHAR2(11)
    MODIFIED                                                                                                           VARCHAR2(20)
    NAMESPACE                                                                                                 NOT NULL VARCHAR2(30)
    CONTROL                                                                                                   NOT NULL VARCHAR2(30)
    SCHEMA                                                                                                    NOT NULL VARCHAR2(30)
    PROCEDURE                                                                                                          VARCHAR2(61)
    STARTUP                                                                                                            VARCHAR2(8)
    PARENT_ID                                                                                                          VARCHAR2(30)
    OTHER_SCHEMAS                                                                                                      VARCHAR2(4000)
    sys >select COMP_ID,COMP_NAME,VERSION,STATUS from dba_registry;
    COMP_ID                        COMP_NAME                      VERSION      STATUS
    CATALOG                        Oracle Database Catalog Views  10.2.0.4.0   VALID
    CATPROC                        Oracle Database Packages and T 10.2.0.4.0   VALID
                                   ypes
    OWM                            Oracle Workspace Manager       10.2.0.4.3   VALID
    JAVAVM                         JServer JAVA Virtual Machine   10.2.0.4.0   VALID
    XML                            Oracle XDK                     10.2.0.4.0   VALID
    CATJAVA                        Oracle Database Java Packages  10.2.0.4.0   VALID
    EXF                            Oracle Expression Filter       10.2.0.4.0   VALID
    ODM                            Oracle Data Mining             10.2.0.4.0   VALID
    CONTEXT                        Oracle Text                    10.2.0.4.0   VALID
    XDB                            Oracle XML Database            10.2.0.4.0   VALID
    RUL                            Oracle Rules Manager           10.2.0.4.0   VALID
    ORDIM                          Oracle interMedia              10.2.0.4.0   VALID
    APS                            OLAP Analytic Workspace        10.2.0.4.0   VALID
    XOQ                            Oracle OLAP API                10.2.0.4.0   VALID
    AMD                            OLAP Catalog                   10.2.0.4.0   VALID
    SDO                            Spatial                        10.2.0.4.0   VALID
    EM                             Oracle Enterprise Manager      10.2.0.4.0   VALID

  • How to check whether database is in use or not

    hi,
    i have written a program for taking backup of database file(ACCESS).
    i can able to zip it successfully, but i have to check before zipping that
    whether it is opened or closed(using by any other).
    How can i do it.I am not getting idea. please do help
    Thanking you in advance
    regards
    shashi

    I don't know if this is possible. Since you have access to the file system and know the Access MDB location, look to see if the Access lock file exists. It's usually in the same location as the MDB and has the same name with an LDB extension

  • Check whether checkbox interaction has been clicked

    Can anyone tell me whether it is possible to use the checkbox widget from the advanced interactions in Captivate 7 as part of a quiz as detailed below.
    What I would like to do is have 18 checkboxes on my slide with a button which when pressed will trigger an action to check if the correct ones have been checked. If they have I'll show correct feedback, if not I'll show incorrect feedback.
    I guess in short I'd like to know if it's possible to update a variable based on whether the checkbox is selected e.g. '_var = 1' or not '_var = 0'.
    I had considered creating a bespoke activity using click boxes and advanced actions to achieve the desired results but the iPad can't handle more than five click boxes on an individual slide.
    Many thanks in advance.

    Hello,
    I'm not sure that iPad will be able to support that, since one is never sure but it can be done in Captivate. My blog post about using checkboxes/radiobuttons for custom questions is the most popular post I ever wrote, when i screen the number of visits: http://blog.lilybiri.com/widgets-and-custom-questions-part-1
    The radiobuttons and checkboxes interactions have an identical functionality but are guaranteed for HTML5 output.
    You will see that the associated variables are no booleans at all but will be empty when checkbox for that item is not chosen, or equal to the item when chosen. This means that you'll have to create a conditional action that checks for the correct entries like this:
    IF v_one is equal to 'This is first item text' AND
         v_two is equal to v_null      AND...   where v_null is an empty variable, or you can also
    Since this is a static interaction, you will need an event to trigger that action: you could use a button 'Submit' or a slide event.
    http://blog.lilybiri.com/using-captivate-widgets-some-tips
    Lilybiri

  • How to check whether a user has permission to create term in Taxonomy Term Store using CSOM ?

    I want to check programmatically whether the current user is a Term Store Administrator or not.

    I am not sure how Tomcat handles this, but you need to use two-way (mutual authentication) request but not enforce SSL between Tomcat and the client browser. This will make the browser prompt the user for the cert they want to send. Then you'll need to tackle the other part of your problem, getting the correct content displayed depending on whether the user sent a cert or not. I'm even less help there than I was on the first part of your question.
    So, yeah - good luck with that
    Lee

Maybe you are looking for