Need to create a chart in summary page and link it to data

I need to create a chart in a XL worksheet that contains other summary information. I am able to create a chart in a seperate sheet but i simply cannot find a way to insert a chart into a worksheet already containing some information. To make it clear, my requirement is as follows:
Inser a chart in cell 'X,Y' with a dimention of 'W,H' and link the chart data to some data in some other page 'sheet1'.

And that answr is?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

How can I create 25 charts on a page, each chart 2 columns and 10 rows

I need to create a chart that has 25 tables. 5 tables in 5 columns. Each table has 2 columns and 10 rows. I know it can fit all on 1 page as I have seen it done but I can not figure out how

I had some initial difficulty understanding your question. In Numbers, a "chart" is a graph.
You want to create a 5 x 5 array of tables, each with two columns and 10 rows, placed on a single page.
At the default size, each cell on a new Table is 1 inch wide and 0.2 inches high. So without displaying a title, each of your 25 charts would occupy a two inch square space.
Butted closely together, that's a space that is 10 inches wide by 10 inches high.
On a machine set to US localization,the default page size is US Letter, placed in Landscape orientation. Left, right and top margins are set to 0.75", bottom margin is 0.5", and there is a 0.25" height reserved for page header and page footer.
That leaves a working space that's 9.5" wide and 6.75" high.
Obviously, some adjustments will be needed.
0.2" is pretty much the minimum for row height. You can go smaller by typing in a smaller height in the Table Inspector, but even with 9 point type, you begin to lose the descenders on ps and qs. Go with 0.2, then use the slider in Print view to further shrink the content.
If you can narrow the columns significantly (to 0.75" or less), then go to Page setup and change to Portrait orientation.
In the Sheet Inspector, decrease all margins to 0.5", and the header and footer spaces to 0. Set page orientation to Portrait.
Now consider the Table(s). If you've opened a new, blank document, you'll have a multi column, multi row table with one header row and one header column. If you don't need the header row and header column, delete them (column A, Row 1) right away.
Reduce the number of rows to 10 and the number of columns to 2. Select the whole table and, in the Table inspector, set the row height to 0.16" and the row width to 0.73".
With the table still selected. press command-D four times to create four duplicate tables.
Go View > Show Rulers, then View > Show Print View. go back to the Table Inspector and use the slider to set Content Scale to about 94%.
Drag the still selected Table to the right margin of the page. Press command-A to Select All.
Go Arrange > Align > Top
Go Arrange > Distribute Space > Horizontal.
With all five tables still selected, press command-D to duplicate the set.
Hold down the Shift key and press the left arrow once, then the down arrow 14 times. This should bring the new row of tables into line with the previous ones, and move them down the page to just below the first row of tables. If fine adjustment is needed, use the arrow keys with the shift key released.
Repeat three more times to add another three rows of tables.
Adjust the spacing between tables as necessary.
Regards,
Barry

I have created a flyer in mac pages and need to get it to a printer to do a mass gloss printing. can someone advise how to do this.. should i burn the document to a cd or dvd? Thanks

I have created a flyer in mac pages and need to get it to a printer to do a mass gloss printing. can someone advise how to do this.. should i and can i burn the document to a cd or dvd to give to the printer?
Thanks

Some may need a CD while others may need a DVD or can use either medium. Why not call your printer, tell them what you've got and ask them what they need to do the job you want done? That way, you'll be working with what he/she needs to complete the job properly.

How do I know if my iphone has successfully been backed up to my iTunes? I plugged it in and it said it backed up and I did a sync, but when I am looking through the summary page and I am not sure that all of my data got backed up. Please help!!

I have never backed up my iphone to my itunes because I always used the cloud. However, a few months ago, my wifi disk in my phone burned out so the Apple Store told me to back up everything to my itunes. I am going today to get the iphone 6 so I connected my phone (iphone 4S) to my itunes and I backed up and synced. However, when I look throughout the summary page and click in different areas (Photos, Movies), I don't see any of my data -- it is still asking me to Sync from iPhoto or to sync from another location. By backing up & syncing my phone, did all of my data get saved? Or do I still need to do more steps?
Sorry for the long winded question, I am just so nervous to get a new phone and plug it in to be restored and not have any of my pictures, videos or contacts, etc. Any help would be so so appreciated!

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

I am getting some update that says I need to have geno as my home page and down load something else on the computer to run the maverick os system

I am getting some update that says I need to have geno as my home page and down load something else on the computer to run the maverick os system. Is this you or some hacker

Is your iMac running okay? Where are you getting this update from? Especially if it is an e-mail, I would not do what the 'update' is suggesting.
Your profile shows you are running Mavericks. If everything is okay, then it would appear to me you don't need to download something to run Mavericks.

I'm using a 16GB iPhone 4s, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out a

I'm using a 16GB iPhone 4S, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out and come back in, all the native apps I turned cellular off for are back on again. Kindly help me

Exact same question as ankit1986, specifically with the photos while on cellular-only, and as simple as it sounds, I tried the hard reboot Ingo2711 suggested. Still experiencing the same error with the native apps reverting to on. It's killing our shared data-plan (2GB).

Help Needed Regarding Creating a DFF in OAF page

Hi ,
I am trying to create DFF in OAF page but i could not able to create it.
Here is the through explanation of the Requirement and Error.
We have migrated recently from 11.5.10 - R12.1.2 in 11i we have the Buyers Form which is a Template.FMB and for that we have attached a DFF
Name of DFF:PO_AGENTS Resp :PO Tittle Purchasing: Agents and attributes :attribute1 and Attribute2.
My manager want that same DFF to appear in the OAF page of the Buyers.
Navigation :Purchasing -> Setup -> Personal -> Buyers.
I tried creating DFF as per the documents I found online and in the OAF Documentation guide but I am not able to create the DFF.I dont know where I am doing it wrong.
Help would be highly appreciated.
Please find the steps below what is given.
Before you can add a descriptive flexfield to an OA Framework page, you must first setup the descriptive
flexfield in Oracle Applications. To start, review Chapter 3 ("Planning and Defining Descriptive Flexfields") in
the Oracle Applications Flexfields Guide Release 11i.
When you have a clear plan for the descriptive flexfield you wish to set up, refer to the section titled
"Implementing Descriptive Flexfields" in Chapter 14 ("Flexfields") of the Oracle Applications Developer's Guide
Release 11i for instructions to the following general steps:
Step 1: Define descriptive flexfield columns in your database.
Step 2: Register your descriptive flexfield table with Oracle Application Object Library.
Step 3: Register your descriptive flexfield using the Descriptive Flexfields Window.
Next, refer to the Oracle Applications Flexfields Guide Release 11i for instructions to these general steps:
Step 4: Define your value sets in the Value Sets Window, as described in Chapter 5 ("Values and Value
Sets").
Step 5: Define your descriptive flexfield structure using the Descriptive Flexfield Segments Window, as
described in the "Descriptive Flexfield Segments Window" section of Chapter 3 ("Planning and Defining
Descriptive Flexfields").
Recall that the value of a descriptive flexfield context field determines the context of the descriptive flexfield
and the context-sensitive segments (if any) that are displayed. The section titled "Context Fields and
Reference Fields" in Chapter 3 ("Planning and Defining Descriptive Flexfields") discusses context fields in
more detail.
Note: Reference fields for descriptive flexfields are supported by Forms-based Oracle Applications, but not
by OA Framework. A developer mode error occurs in JDeveloper if you try to implement this feature in OA
Framework. Refer to the "Reference Fields" section of Chapter 3 ("Planning and Defining Descriptive
Flexfields") in the Oracle Applications Flexfields Guide Release 11i for additional information about
reference fields.
Step 6: When you are ready to add the descriptive flexfield to an OA Framework page, follow the steps
outlined in the Declarative Implementation and Runtime Control sections below.
Declarative Implementation
The following steps describe how to add a descriptive flexfield item to a OA Framework region:
Step 1: Define an item of the item style flex in your region.
Note: You cannot create a flex item directly under a messageComponentLayout region, but you can create a
messageLayout region under the messageComponentLayout region and add the flex item under the
messageLayout region.
Step 2: Set the Read Only property to True or False, depending on whether you want the descriptive flexfield
to be read only.
304
Step 3: Specify a View Instance for your flexfield. The view instance should be the same as the view instance
(view object) specified for your region. When the view object is defined, it should include all the database
columns necessary for this descriptive flexfield. You should not change the database column names for this
flexfield because the OADescriptiveFlexBean uses the same naming convention that the view object
generation routine uses to find the corresponding attribute names from your view object.
Note: OA Framework supports multiple descriptive flexfields on the same view object.
Note: If a flexfield's view object does not return a row, an OAException will not be thrown so that the
controller's processRequest method can still execute and render the flexfield.
Step 4: Set the Appl Short Name property to the short name of the application to which the descriptive flexfield
is registered. (Step 3 of Setting Up a Descriptive Flexfield in Oracle Applications).
Step 5: Set the Name property to the name of the descriptive flexfield as it was registered.
Note: This differs from how Key Flexfields are defined by shorthand codes.
Step 6: Set the Type property to descriptive.
Step 7: Set the Segment List property as appropriate (see Descriptive Flexfield Segment List).
Step 8: Finally, you may set the Display Context Field to True or False, depending on whether you want to
hide or show the context for the descriptive flexfield.

Hello all OAF GURUS,
Here is the brief explanation of what I am doing Environment :R12.1.2
I am creating an item type of FLEX and the values are
Step 2) Set the Read Only property to True
step 3 )View Instance : PoAgentsVO
step 4) Application Short name :PO
Step 5: Set the Name property - PO_AGENTS name of the DFF
Step 6: Set the Type property to descriptive
Step 7: Set the Segment List property as appropriate here I am giving as Attribute1||Attribute2
Step 8: Finally, set the Display Context Field to True
after doing all these I am not able to see the DFF i dont know where I am doing a mistake.
Help would be highly appreciated.
Thanks & Regards
Krishna
Edited by: user12156300 on Jan 29, 2010 7:55 AM

Help needed to create a master-detail JSP page using OAF.

I like to create a master-detail JSP page using OAF. If any help or guide will be appreciate.
- Kausik

A Master Detail Page is a basically a game between two VOs(Master and Detail mostly connected through a View Link). You can also have a look at the View Link section in the Dev guide. Page Layouts is one thing which you can take a call yourself.
Regards
Sumit

I need an economical product to insert/remove pages and convert PDF to PDF/A-1a

I need an economical product (under $100) to insert/remove pages and convert PDF to PDF/A-1a (or, if it can create PDF/A-1a directly from my scanner, that's good too). There's something for $50 but it only supports PDF/A-1b. Any suggestions?

As others point out, Acrobat is essential though a bit expensive. There are some very economical (i.e. free) tools that are extremely helpful in properly tagging a PDF.
- PDF Accessibility Checker (PAC) 1.3 from the Swiss Foundation Access for All validates the PDF for WCAG 2.0 compliance (to the extent that validation can be automated). It is far more thorough than the feeble accessibility checker that comes with Acrobat, http://www.access-for-all.ch/en/pdf-lab/pdf-accessibility-checker-pac/dl132.html.
- PAC 1.3's successor, PAC 2.0 performs the same job for ISO 14289 compliance, http://www.access-for-all.ch/en/pdf-lab/pdf-accessibility-checker-pac/downloading-pac.html
- PDFgoHTML from Callas Software provides a convenient screen-reader view of the document using an Acrobat plug-in, http://www.callassoftware.com/callas/doku.php/en:download. Both PACs also provide screen-reader views, but it is handy to have an Acrobat plug-in that provides the view in a couple of clicks.

Can FrameMaker Automatically create a List of Effective Pages and Track Revision Number?

I see that FrameMaker will provide vertical lines automatically in updated content when set up to track changes. It also will create TOC's and Indexes.
What I need is a way to also work with a List of Effective pages and Page Revision Numbers. I have been researching different programs for maintaining aviation manuals and this is a key area that I need to work out.
Any thoughts on this subject would be appreciated.
Thanks

See Steve Kubis's LEP Tools plug-in at SiliconPrairie Software:
http://www.siliconprairiesoftware.com/Products.html

Need To Create a table in Sql Server and do some culculation into the table from Oracle and Sql

Hello All,
I'm moving a data from Oracle to Sql Server with ETL (80 tables with data) and i want to track the number of records that i moving on the daily basis , so i need to create a table in SQL Server, wilth 4 columns , Table name, OracleRowsCount, SqlRowCount,
and Diff(OracleRowsCount - SqlRowCount) that will tell me the each table how many rows i have in Oracle, how many rows i have in SQL after ETL load, and different between them, something like that:
Table Name OracleRowsCount   SqlRowCount  Diff
Customer                150                 150
0
Sales                      2000                1998
2
Devisions                 5                       5
0
(I can add alot of SQL Tasks and variables per each table but it not seems logicly to do that, i tryid to find a way to deal with that in vb but i didn't find)
What the simplest way to do it ?
Thank you
Best Regards
Daniel

Hi Daniel,
According to your description, what you want is an indicator to show whether all the rows are inserted to the destination table. To achieve your goal, you can add a Row Count Transformation following the OLE DB Destination, and redirect bad rows to the Row
Count Transformation. This way, we can get the count of the bad rows without redirecting these rows. Since the row count value is stored in a variable, we can create another string type variable to retrieve the row count value from the variable used by the
Row Count Transformation, and then use a Send Mail Task to send the row count value in an email message body. You can also insert the row count value to the SQL Server table through Execute SQL Task. Then, you can check whether bad rows were generated in the
package by querying this table.
Regards,
Mike Yin
TechNet Community Support

Can I create a fillable form in Pages and then PDF to iWeb?

I'm a teacher and I'd like to be able to upload some PDF documents for my students to download, but would LOVE it if I could make sections of the document available for them to fill out answers, so they could, in turn, save as PDF and send back to me!
Is this possible?
I know how to get the documents into iWeb and that is working fantastic.
But I don't know how to create an area on a page that students can write in. Do I have to maybe do the whole thing in PDF Writer (never used it but have heard that it might have that capability).
THANK YOU!
--MacMeg in Neverland

treivisone wrote:
But my problem is that i want to export my Pages' page directly to iweb to put it as a podcast. I'm working for an association that wishes to make all the content on itunes...
Ummm.... I know a lot about podcasting, but to my knowledge there is not a way to "embed" a document in a podcast episode. The XML specifications do not do that. However, in the content of an "enhanced" podcast, you can link to a document which can be downloaded while "viewing" the podcast. For an example of that, see my podcast episode:
http://spot.pcc.edu/~dleighto/podcasts/psy201a/episode20080117133153-0800.m4b
If you go to about 29:30 in the podcast, and have opened the artwork/video viewer, you will see a link at the bottom of the viewer pane to download the file. That file, however, is stored separately from the podcast episode. In iWeb, you would set that file up on a downloads page. Then in the podcast episode, you specify the path to access the file. When the user clicks on the link in the viewer, it downloads the file.
Is that what you want to do?

Do we need to create two different home for UCM and WC?

Hi All,
I am trying to create Webcenter VM(oracle linux 5) with ECM I used 11.1.1.5.0 version for all installable.for creating this VM.
here do we need to create separate Home for webcenter and UCM installations.
any one give me some proper directions to installation of the same
thank you!
Siva

yes i saw those folders but while installing I installed weblogic server in fmw folder.then Installed UCM on top of the i installed WC,but while installing WC its showing ora home is already exits select another or override. like that i am getting so i override. when i am creating domain its completed but i am not able to see startWeblogic.sh in bin folder of the domain.
I realized that i did mistake while installation.
can you please give me best infrastructure for web-center installation with all features(portal,sites spaces and content) I have sufficient memory to run multiple VMs.
Thank you!
Siva

Need to create a list using Price Adjustments and org contact detail

I need to create a list containing data from the OE_PRICE_ADJUSTMENTS table, data about the product(s) ordered and customer data related to the order(s). What tables and what common fields can I use to join this data?

ok I was able to get the price adjustments information in my output, but my organization contact information (names, email addresses, etc) are not populating. The fields are there, but they are blank. Why aren't these fields populating with the order information?
I'm using OE_PRICE_ADJUSTMENTS_V as my parent data source, and I have 2 child data sources related: Order Detail (from AMS_DS_ORDERS_V) and information from QP_LIST_HEADERS_ALL.
Message was edited by:
user458832
Message was edited by:
user458832

Need to create a procedure whic h search and drop tables from the db.

Dear Gurus,
I need to create a procedure, which first checks the tables and then drop those tables if find in the database. For example, I have 5 tables, then my procedure should first checks the existence , then drop all those 5 tables from the database. Actually, I have to attach this procedure to report buildeer, so please keep in mind the above mentioned scenario. Your input will be highly appriciated.
hare krishna
Alok

Dropping 5 tables each time user hits the report!!! (According to my understanding)
I would like to share my experience. My group developed many complex reports, we used oracle jobs to run the complex queries time to time, according to our business requirements and stored the result in a final table. Just for viewing at front end level, we used a simple select statement.
-aijaz

Need to create a chart in summary page and link it to data

Similar Messages

Maybe you are looking for