Need to create legal doc - how do I?

I am migrating from MS Office/Word. How do I create a legal document with a vertical bar/line coming down the middle of the case style to separate the State vs. Defendant section from the case #?

Here is a link to that might help you:
http://discussions.apple.com/thread.jspa?messageID=8750095

Similar Messages

  • I need to creat a barcode how do I go about this

    I need to creat a barcode how do I go about this

    You start by finding a (free or paid) barcode font
    In my last job I had to create barcodes for an inventory scanner... I've been retired for 3 years so don't remember the name of the font I found, but once I had the font installed, I simply used Word to type whatever I wanted, and the barcode characters were printed for labels
    I do "sort of" remember that the font I used was a 39 or "3 of 9" Truetype font

  • I need to create a ghost image of my G4 iBook (OSX 10.3.9) and replace the OS9 on my G4 tower with the created iBook ghost image. How do you do this?

    I need to create a ghost image of my G4 iBook (OSX 10.3.9) and replace OS9 on a G4 tower with the Ghost image. How do you do this? Will my applications still work?
    The iBook is running Pather, i have tons of programs i use on it, project files, etc... and my G4 Mac tower is more powerful, faster, and more reliable than the iBook. I basiclly just want to take the entire OS, programs and files... create an image, and drop the image on the G4 Tower so it basically will function just like the iBook. Like a mirror image of everything that is on the iBook.  I know that you can create image files in the Disk Utility on Panther, but will that back up the entire OS with settings, programs, files and all?  ive never done anything like this before, so i wanted to post this up to see if i would get an answer. In the meantime, im reading "Mac OS X, Help Desk Essentials By Owen Linzmayer" to see if i can find the steps to do this.
    Any help would be greatly apprciated. Much thanks!

    Can't be done as an exact copy from one Mac to the other.  The operating systems are system specific. First make sure your system doesn't need a firmware update to get 10.2 or later on it. You'll need to install 9 on it if it does, direct from a 9 retail CD that is compatible with it *.  This disc can't say Upgrade, Dropin, or OEM. To determine compatibility, identify your G4 tower:
    http://support.apple.com/kb/HT3082
    http://docs.info.apple.com/article.html?artnum=42739
    Then look at the OS 9 compatibility:
    http://docs.info.apple.com/article.html?artnum=25517
    Then apply the correct update
    http://docs.info.apple.com/article.html?artnum=86117
    The last Mac OS 9 to come retail is 9.2.1, and that's newer than 9.0.4, 9.0.2, and 9.1.
    Your ghost image can be done using cloning software, but then you'll have to use a retail 10.3 installer and 10.3.9 combo update on the G4 tower.  Then use the Migration Assistant to import the data from the clone of the iBook. The 10.3 retail disc looks like * and does not say upgrade, dropin, or OEM.  The 10.3.9 combo update is here:
    http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
    The clone to an external hard drive can be done with these instructions*:
    http://www.macmaps.com/backup.html The import of the external hard drive with the migration assistant can be done with these instructions:
    http://docs.info.apple.com/article.html?artnum=25773

  • How to create Oppertunity doc automatically after lead in CRM SALES

    Hi,
    how to create oppertunity doc automatically after creating lead in crm sales
    Thanks7regards
    kishor kumar

    Hi Kishore,
    Create SAP Business Workflow for Opportunity from Lead 
    Use
    A lead is a business transaction that describes, stores, updates, and manages the potential business interests of a business partner, and the interactions based on this over a period of time. The goal is to provide the "sales" area with the information gained in the lead, in order that it can be used as a basis for deciding whether to create an opportunity.
    The information gathered in the lead is transferred to the "sales" area via the workflow "create opportunity from lead".
    In the workflow, you decide whether the opportunity is generated manually or automatically.
    If the lead-specific attributes Priority and Lead group fulfill specific criteria, the workflow automatically generates an opportunity. Otherwise, the workflow sends a work item to the sales employee responsible, for manual creation. Once he has checked the data in the lead, the sales employee can either reject this lead or create an opportunity from it.
    The workflow is automatically started when the lead is saved.
    The sales representative entered in the lead is first taken as the sales employee whose task it is to create the opportunity based on the information in the lead. This person can be determined using partner determination in CRM, depending on the prospect in the lead, and can, for example, be a manager of a sales area. If no sales representative is entered, the workflow takes an organizational unit assigned in the workflow template, and sends the work item to all users assigned to the organizational unit.
    Prerequisites
    u2022     The type linkage for the start events AttributeChanged and SetErrorFree for the workflow WS10001011 are deactivated as a standard procedure, and, if you wish to start the workflow template, they have to be activated again in Customizing. The workflow task processors must also be maintained. In Customizing, choose Customer Relationship Management  Basic Functions SAP Business Workflow  Perform Task-Specific Customizing.
    u2022     The workflow template uses the user statuses SAAC (accepted by sales) and SARE (rejected by sales) of the status profile CRMLEAD. If you have defined several user statuses, the data flow for task TS10008154 (set status) must be adapted accordingly.
    u2022     When the opportunity is created, the workflow template uses the opportunity transaction type OPPT. If you have defined several transaction types for the opportunity, the data flow for task TS10008151 (create opportunity) must be adapted accordingly.
    u2022     If the sales employee rejects the lead, the workflow resets the qualification level to value 02 (warm). If you have specified your own qualification levels in Customizing, you need to adapt the data flow for task TS10007918 (change qualification level) accordingly.
    Process of Workflow WS10001011 (create opportunity from lead)
    The workflow "create opportunity from lead" is started when a lead is saved with qualification level Hot and status Error-free. The system uses the lead-specific attributes Priority and Lead group to check whether an opportunity can be automatically created, or a sales employee first needs to decide. If the sales employee decides that an opportunity can be created, the lead status is set to "accepted by sales", and an opportunity is created in the background. If necessary, this is forwarded to the sales employee to check. If the sales employee rejects the lead, the lead status is set to "rejected by sales", and the initiator is informed by mail.
    The workflow is ended if no opportunity is created and
    o     the lead is deleted or
    o     the qualification level of the lead is changed to a value other than Hot or
    o     the status of the lead is changed to a value other than Error-free.
    Path for the workflow:
    ==> SPRO
    ==> Customer Relationship Management
    ==> Basic Functions
    ==> SAP Business Workflow
    ==> Perform Task-Specific Customizing
    Select the Application Componenet  Abbrevation as CRM and expand
    Select CRM-BTX and expand
    Select CRM-BTX-LEA and click on Activate event linking  and acivate workflow WS 10001011
    It may helps you
    Regards
    Narayana

  • I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    do I need to create another account with a different email account
    Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different.

  • How many DNS record need to create in Internal & external DNS server for exchange?

    Hi friends,
    I recently installed Exchange Server 2010 in my organization for testing purpose and I've register a pubic ip too for exchange server on godaddy.com. How many
    internal & External DNS records reqired to configure on external & Internal dns server so my all feature like Auto-discover, Activ -sync,& webmail start working perfectly.
    It's my first time configuring exchange for a organization.
    Thanks & Regards,
    Pradeep Chaugule

    Hi,
    Just as what ManU Philip said, you need to create
    Autodiscovery.domaincom and mail.domain.com for external dns server.
    Generally, you configure your Exchange Servers as DNS clients of your internal DNS server.
    Refer from:
    http://technet.microsoft.com/en-us/library/aa996996(v=exchg.65).aspx
    Best Regards.

  • How do I move all my files from one User Profile (account) into another? I needed to create a new account and want all of my files accessible in the new one.

    How do I move all my files from one User Profile (account) into another?
    I needed to create a new account and want all of my files accessible in the new one.

    ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
    now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
    the start of that tree is /
    so, if you were to do:
    cd /
    (cd means change directory)
    it will bring you at the highest branch of the file system.
    cd /Users
    will bring you to where all the users are.
    to see whats in /Users you can use your friend ls command
    ls means list files/directories
    so:
    cd /Users
    ls -la
    (the -la here means show all (even hidden) and long format (very verbose))  this flag is very optional.
    you will see
    fred
    user2
    for example.
    if you want to see the desktop of user2 you would change directory to it then list the files.
    for example:
    cd /Users/user2/Desktop
    Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
    ls -la
    you should then be able to see everything in users2 desktop
    you could have done as well the same thing in smaller steps, for example:
    cd /
    cd Users
    cd user2
    cd Desktop
    this is the equivalent of cd /Users/user2/Desktop
    So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
    /Users/user2
    which most likely the file you had created from the other user was in /Users/user1
    if you copied all the files from /Users/original_user to /Users/secondUser
    most likely yes, all your mail, bookmarks etc would be copied over.
    so in your case.
    sudo chown -R seconduser:staff /Users/secondUser
    should work
    Remember that if you start a path with the character /  it means start from the root of the file system, at the highest top you can ever get.
    so
    cd /Users/fred
    is not the same as
    cd Users/fred
    unless you were in / already
    i know it may be confusing at first but it's actually very logical if you play with it.
    to simplify, think of it that / means C:\  on windows
    you can't go any higher than C:\  (in a way)
    if you're unsure which directory you're currently in, you can always type:
    pwd
    it will tell you where you are.
    for example:
    cd /
    pwd
    this shows  /
    cd Users
    pwd
    this now shows /Users
    cd /System/Library
    pwd will show /System/Library
    cd /
    cd /Users
    cd fred
    cd Library
    pwd will show /Users/fred/Library
    unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
    so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
    ls -la  (this shows all the files where you are)
    if you see myfile in the list
    do a pwd
    whatever is return, the real location of the file would be:
    whatever pwd returned / myfile
    I hope that makes sense.

  • Purchased a second iphone need to create an account, however the computer already has an itunes account...How do I create a second  account using one copy of itunes on a computer??

    Purchased a second iphone need to create an account, however the computer already has an itunes account for the first iphone...How do I create a second  account using one copy of itunes on single computer??

    Why do you need a new account?
    Use the same account on both.
    How to use multiple iPods, iPads, or iPhones with one computer

  • I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    Hi kamfong,
    Went to Settings where?
    If you want to use your exisiting Apple ID on your iPad, you need to:
    1.     Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
    2.     Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
    You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
    Cheers,
    GB

  • I need your expert opinion on how to create a map with multiple conditions.

    Hello.
    I need your expert opinion on how to create a map with multiple conditions.
    I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
    How can i create a cursors within the map?
    My function creates table and cursor.
    Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
    The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
    In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
    I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
    In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
    having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
    I would appreciate any help / advise on this.
    Thank you very much

    thanks a lot for your reply - i will look into this option :-)
    it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
    At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
    Anyway, thank you very much for your suggestion.

  • I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

    I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
    Thanks.

    Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
    If possible, please try Indesign CS 4.

  • I have an itunes account.  However, I need to copy music onto a different iPod than my own.  How do I do that?  Do I need to create a separate iTunes account for that iPod?

    I have an itunes account.  However, I need to copy music onto a different iPod than my own.  How do I do that?  Do I need to create a separate iTunes account for that iPod?

    An account means an iTunes Store account which is an online service.  Do you mean that, or do you mean a library on a computer?
    iOS devices can only be synced to one iTunes library at a time.  You can sync that iPod to your account but it will wipe everything currently on it.
    iTunes: Syncing media content to iOS devices and iPod - http://support.apple.com/en-us/HT201253 - detailed example: https://discussions.apple.com/message/18860187#18860187
    If you use manual syncing, you can sync items from more than one iTunes library to your iPod. (You can sync iPod touch, iPhone, and iPad with only one iTunes library.) When manually managing content, you can add content from multiple libraries to your iPod or iPad. Even when manually managing music, some content may be available from only one library at time. This includes all content on iPhone and video content on iPod and iPad. http://support.apple.com/kb/PH12113  and http://support.apple.com/kb/HT1202
    I could post another 2 pages of stuff trying to cover every possible scenario.  It would help if you let us know exactly what you want to do.  Are you trying to sync just a few songs (like giving them to a friend which is something iTunes is deliberately set up not to do)?

  • ISCSI MPIO, how many path do I need to create

    Hi,
    I've a server with 4 NIC connection to a DELL MD32xx which have 8 NIC.
    My question is how many path do I need to create under iSCSI connection.
    Do I need to create a path from each Server NIC to each MD32xx NIC, which will make 32 connection (and doesn't make sense).
    If not, how should I proceed, I've looked at many example and none seem to cover that kind of situation, they just directly connect the server NIC to the MD32xx NIC instead of going through switch for redundancy.
    Thank
    ML

    Hi,
    I've a server with 4 NIC connection to a DELL MD32xx which have 8 NIC.
    My question is how many path do I need to create under iSCSI connection.
    Do I need to create a path from each Server NIC to each MD32xx NIC, which will make 32 connection (and doesn't make sense).
    If not, how should I proceed, I've looked at many example and none seem to cover that kind of situation, they just directly connect the server NIC to the MD32xx NIC instead of going through switch for redundancy.
    Thank
    ML
    Please follow the guides and discussions here:
    Windows MPIO Setup for Dual Controller SAN
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/3fa0942e-7d07-4396-8f2e-31276e3d6564/windows-mpio-setup-for-dual-controller-san?forum=winserverfiles
    It's MD3260 so can be used for 32xx storage unit with iSCSI uplinks.
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • I need to create a dashboard.  How do you bring Crystal Reports into Excel?

    Hello,
    I need to create a dashboard.  My boss wants a spreadsheet to show multiple reports and charts about the business.  I know you can insert multiple charts in Excel.  However, I need to be able to insert a report next to one of the charts.
    I am thinking of using the RDC and bring in a Crystal Report.  The problem is that I see with Crystal Reports 2008, you can't use RDC.
    Is there an upgrade to RDC?  How do I bring the Crystal Report into Excel next to the imbeddged charts.  I know I can export a Crystal Report to Excel.  But that Exports to a entire spreadsheet.  I just want to embed a Crystal Report into Excel.  The last time I did a project like this, I used to use the RDC with the same code as in VB6.  Worked great.
    How do you embed a Crystal Reports now?
    Thanks.

    The question was how do you do it?
    I don't have .NET.  However, if that is the only way, then I can buy .NET.
    I just need someone that knows how to do it to point me in the right direction.  To embed something in Excel, I hadn't thought of using .NET.

  • I need to delete an account that i accidently created... how can i do so?

    I need to delete an account that i accidently created... how can i do so?

    If you open Terminal
    Applications/Utilities/Terminal.app
    You can see all the user on your machine, this would lead you in the right direction
    copy and paste:
    dscl . list /Users | grep -v ^_.*
    hit the return key

Maybe you are looking for