Need to Get VK_Media_Stop type keys but standard keyevent does not capture this.

I need to obtain the following
Keyboard keys
#define VK_BROWSER_BACK 0xA6; // Windows 2000/XP: Browser Back key#define VK_MEDIA_NEXT_TRACK 0xB0; // Windows 2000/XP: Next Track key#define VK_MEDIA_PREV_TRACK 0xB1; // Windows 2000/XP: Previous Track key#define VK_MEDIA_STOP 0xB2; // Windows 2000/XP: Stop Track key#define VK_MEDIA_PLAY_PAUSE 0xB3; // Windows 2000/XP: Play/Pause Track key The key are on the keyboard, but are the only keys the Event can not detect.(All other keys can be detected.) Does labVIEW have a way to get the value when these keys are pressed?. Is so can someone direct me to a site or example page.

Hi TwoCentsHappy,
i think it should be possible with this library.
http://zone.ni.com/devzone/cda/epd/p/id/4394
Mike

Similar Messages

HT201303 I tried to update my security questions this morning but got timed out. Ive just tried to get into my account but the system does not recognise the answers to my question. How can I rectify this problem please

I was trying to update my Security Questions this morning but got 'Timed Out' I've just tried again to get into my security settings but the system does not recognise the information I'm putting in. Can anyone tell me how I can correct this problem. I can still log-in.
Best wishes

Welcome to the Apple Community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

HT5654 I performed the update to my iphone to get the latest version, but now it does not want to activate my phone and displays the error message that the activation server is not available. Tried itunes and no luck. help anyone

I have an iphone 3gs of which I attempted the latest IOS pdate through itunes. Now, it shows the original start up screen and when it gets to the activiaton screen it displays an error message stating: Your iphone could not be activated because the activation server is temporarily unavailable. Help anyone??

"We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care?"
99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked.

I have a IMac 7.1 Intel and trying to download vidoes to an Ipad version 5.1.1 - i keep getting error's stating that the ipad does not support this version - any suggestions?

I have an Imac 7.1 intel and trying to download videos into an Ipad - I keep getting error messages that states not supported - any ideas?

What is a 7.1 intel?

I have changed the Apple ID in the main ID settings but my iPhone does not recognise this. I have added this to the main account but it does not accept the password.

I changed from iPhone 4s to iphone 5s. While doing the set up, I also renamed my Apple ID. However, allowed the old Id to be an alternate. However, now my iphone refuses to accept the password - neither the new one or the old one. What do I do?

Hello, pryiyer.
Thank you for visiting Apple Support Communities.
I would recommend reaching out to our Apple ID Account Security team to assist you with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

The type or namespace name 'BusinessData' does not exist in the namespace 'Microsoft.SharePoint' (are you missing an assembly reference?)

I am trying to compile my SharePoint 2010 solution(VS2010) in VS2013 to deploy in SP2013, i have removed all old 14 ref and added 15 ref for microsoft.SharePoint, office.server and other assemblies.
still i am getting "The type or namespace name 'BusinessData' does not exist in the namespace 'Microsoft.SharePoint'
(are you missing an assembly reference?)"
did i miss any step here or any version issue?
any suggestions to resolve
Thanks
S.Venkata Appaji

Hi,
Just confirm that Target Frame work has been changed to 4.5 or not, if not changed it to 4.5 and give it a try. Then also it gives error then check the SP reference, dll properties and check its version(it should be 15.0.).
PS:-You can fine target framework under project properties->Application-> Target Framework.
Regards,
MS

HT1338 my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8. How do I get that? When I run a software update, system says there is none. Help

my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8. How do I get that? When I run a software update, system says there is none. Help

Click here, check that your computer meets the requirements, buy and install the DVD, and then run Software Update.
(73181)

My phone is stolen i need to get the serial number but i only have yje IMEI what should i do how can i get my serial number

my phone is stolen i need to get the serial number but i only have yje IMEI what should i do how can i get my serial number

Why do you need the serial number? The phone can't be tracked by either serial number or IMEI.
See this article:
http://support.apple.com/kb/HT4061

HT4113 My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason

My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason, what can we do? Can anyone help please?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Downloaded photoshop CS6 to my new iMac. Opened photoshop but can't bring in a photo from iPhoto - get message that says photoshop does not recognize this type file. Suggestions?

I donwloaded photoshop CS6 to my new iMac. Opened photoshop but cannot openn a photo from iPhoto library - I get a message that says cannot complete our request becausse photoshop does not recognize this type file.
Suggestions?
Rick

You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

HT3964 I am getting the error message "No AirPort card installed" Restarting my iMac desktop does not solve this (Apple help says I need to reset the SMC this way, but nothing changes. Can somebody advise, please?

I am getting the error message "No AirPort card installed" Restarting my iMac desktop does not solve this (Apple help says I need to reset the SMC this way, but nothing changes). Can somebody advise, please?

Thanks for the flag J.K. - they contaced me and solved my problem. On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!

TS1394 i have 10.5.8 and need to get the newest software but dont know how?

i have 10.5.8 and need to get the newest software but dont know how?

You need to buy a Mac OS X 10.6 DVD and then run Software Update. Some MacBook Pros can then be upgraded to 10.7 or 10.8.
(78121)

My iphone warranty just ended a week ago but I need to get it fixed because my power button is not working, do I still have to pay for it to be fixed even though my warranty ended a week ago?

my iphone warranty just ended a week ago but I need to get it fixed because my power button is not working, do I still have to pay for it to be fixed even though my warranty ended a week ago?

Your warranty expired, so of course you will have to pay.

HT4910 I can not back up my iPhone. it says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?

I can not back up my iPhone. It says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

In Adobe Acrobat X Standard, our user used to be able to resize drawings to 8.5 x 10, it stopped working yesterday. It allows her to do this without an error but the size does not change?

In Adobe Acrobat X Standard, our user used to be able to resize drawings to 8.5 x 10, it stopped working yesterday. It allows her to do this without an error but the size does not change?

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

Need to Get VK_Media_Stop type keys but standard keyevent does not capture this.

Similar Messages

Maybe you are looking for