Need to graph one DAQ output vs. a second DAQ output on the same graph.

I am having trouble graphing two DAQ assistant outputs on the same graph. One output vs. the second output.

Hi there,
You have to convert the DDT signal that comes from the DAQ Assistant to get or data in two arrays.
Then bundle them into a cluster and use a XY Graph.
See attached example:
Hope this helps,
Paulo
Attachments:
XYGraph.vi ‏101 KB

Similar Messages

Can I generate pulse trains on more than one counter output at the same time?

I have a PCI 6601 card with a BNC 2121 to connect the signals to two devices. The card is used as a trigger for both devices and I want to be able to generate pulse trains on two output channels at the same time, with a time delay between the two. How do I do that in Labview 7.1 Development with DAQmx?

I feel foolish for not being able to figure this out, but it still doesn't work. Attached is the VI I use now. Counter 0 generates a finite pulse train and I programmed Counter 1 to generate a retriggerable single pulse triggered by CtrOinternaloutput. I still get the same error message: -50103 The specified resource is reserved. The operation could not be completed as specified.
The same happens if I set the trigger for counter 1 at PFI36 (default output of counter 0) or any other PFI line. If I try a pulse train generation on only one of the counters, both work fine.
If I try the example in traditional DAQ for multiple counter outputs with phase delay, it works fine.
Can you tell me what I'm doing wrong?
Attachments:
Shutter_AND_lamp_trigger.vi ‏103 KB

How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both.

how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

How do I synchronize my instruments output at the same time?

Hello:
I am using Labview to control a New Era Pump Systems automatic syringe pump and to record diameter measurements from a LaserMike optical comparator. My program is fully functional, the code is attached with all auxilliary files in the NE-50X folder. I mostly understand my program, I used drivers for the NE-50X pump found on the NI website to build my code and added to it as needed. My program currently does the following:
After I push the white Run button, I am prompted for a file name. After I enter one, Labview begins collecting data from the LaserMike, syringe pump and pressure transducer and outputs them to their respective numerical indicators and waveform charts. Then I can change the syringe pump flow rate and syringe diameter on the front panel. Once I push the green RUN button on the front panel, the syringe pump runs, and the balloon diameter vs. syringe volume XY graph begins to record. I can then reverse the direction of the pump and/or pause the pump however many times I like, while Labview still records diameter from the LaserMike. Pushing the red STOP button on the front panel terminates the program and stops the pump.
Here are three things I would like to change about my program that I don't know how/what to do:
1) I would like to synchronize my machines so that they are outputing at the same rate.
2) I would like to convert my strain output into PSI.
If anyone has ideas about how to do any of these three things, your help is greatly appreciated.
Attachments:
NE-50X.llb ‏994 KB
Balloon DiameterStrain.vi ‏227 KB

Hello N,
What is considered a special board? I am using a SC-2345 DAQ board. This is where my transducer is hooked into. For my syringe pump and LaserMike I have them being inputed as instruments. When you say millisec resolution does that mean that the data points will be lined up better with one another?
I would like my strain gauge to measure pressure.
Thanks!

Digital input and digital output at the same time

Hi all
I have a PCI-6503 board. I have done 2 task that run simultaneously: the first one is port0_16 output and the second one is port2 input.
I get sometimes (not every times...this is strange...) error-200587 saying:
'Requested operation could not be performed, because the specified digital lines are either reserved or the device is not present in NI-DAQmx.
It is possible that these lines are reserved by another task, the device is being used through the Traditional NI-DAQ interface, or the device is being reset. You might also get the error if the specified resource is currently in use by LabVIEW network variables bound to the DAQ Channel, or if the DAQ Channel is being used in any OPC Client software.
If you are using these lines with another task, wait for the task to complete. If you are using the device through the Traditional NI-DAQ interface, and you want to use it with NI-DAQmx, reset (initialize) the device using the Traditional NI-DAQ interface. If you are resetting the device, wait for the reset to finish.'
In the attached VI i have recreated the basic structure of my real VI (the error is present even here of course...).
How can i do?
I want to have both digital input and digital output with the same PCI-6503 every single cycle... Is it possible?
Please help me!!!
Kind regards.
I love the smell of napalm in the morning
Attachments:
DIO simultaneously error.vi ‏31 KB

Hello Maverick,
Did you have any luck with the example Raven sent you?
In Raven's example, it properly passes the DAQmx task from one SubVI to another to avoid having to open the task again. These errors are likely to occur when you have multiple DAQmx calls in a VI that call the same task again without clearing the previously opened task. If at any given time you try to open a task that already is being used, you might receive an error "resource is reserved"... similar to your original example.
If you are interested, here is an awesome link that gives a detailed explanation of the LabVIEW dataflow paradigm
Learn 10 Functions in NI-DAQmx and Handle 80 Percent of Your Data Acquisition Applications
Thanks and good luck!
Jordan Randall
National Instruments Italy

My friend wanted to create a new iCloud account that was different to her iTunes and app one when she deleted her iCloud account that was the same as her iTunes it won't let her log into her iTunes one now

My friend wanted to create a new iCloud account that was different to her iTunes and app one when she deleted her iCloud account that was the same as her iTunes it won't let her log into her iTunes one now what can I do to fix it she has paid or apps and songs and of she makes another account everything will be lost.
Need help please :) thanks

Ah thanks Razmee however there is NO option to delete the iCloud account in settings!

After I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?

after I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?

Try removing and then reinstalling the Apple software using these instructions.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
The above containes a link for XP. Also. make sure you install the correct Apple software, It comes in 32 and 64 bit and you need the one that is the same as the computer OS

How can I produce two outputs of the same project

Dear Sir,
My aim is to produce two outputs of the same master project,
HTML help and Webhelp each one will be used differently in my
compnay.
Producing two outputs is fine but the problem was that
external links are done differently for HTML help and Webhelp and
as I Knew from you that this can be solved using conditional tags.
Actually I am new to conditional tags and I don't know how to
use them. Could you please help me to do this or recommend a link
on how to use condtional tags to produce different outputs.
Thank you very very much

Hi there ahlam323
See if the link below helps any. Some goober wrote something
on it.
Click
here to read the goober's guide
Cheers... Rick

HT3275 My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help

My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help? This only started doing this about 2 weeks ago.

Hello,
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over.

How to get the sine wave sample of the input and output in the same time?

I discovered that the samples were acquired did not in the same time in my vi.Could you tell me how to get the sine wave sample of the input and output in the same time?
Output:9263;
Input:9201
Attachments:
singal requency.vi ‏104 KB

Hello Yun_Zhu,
Your VI looks like you started from an example, and you are on the right track.
To clarify are you trying to synchronize the input and the output waveforms? If you you will need to share a time base and a start trigger. Check out the synchronization examples from LabVIEW
Anthony F.
Product Marketing Engineer
National Instruments
Attachments:
HIODAQmxSyncMultiDev.png ‏70 KB

Java-puzzlers...Why 2 different outputs for the same line

Here, why it is giving 2 different outputs for the same set of lines
Line-1 and Line-2 are both same.But giving 2 different results ???
/*java-puzzlers*/
public class Elementary {
    public static void main(String[] args) {
         System.out.println(12345 + 5432l); /*Line-1: Original statement- didn't modify*/
      System.out.println(12345 + 54321); /*Line-2: I wrote - I delete 12345 + 54321 and wrote the same thing again*/
}

kjshikal wrote:
one of them is a longkjshikal,
For the third and final time. Please stop resurrecting old threads like this.
Thank you for your co-operation.

Is it possible to uninstall Adobe Premiere Elements 13 from one computer and put it on another PC, using the same serial number?

I had installed Adobe Premiere Elements 13 on my laptop, which is slow. Is it possible to completely remove the program from my laptop, and reinstall it on another PC, using the SAME installation disc?

Tomquer
If all you have is the Premiere Elements 13 purchased activated serial number on one Windows computer, you can go ahead and do nothing else but install the program from the disc on the second Windows computer with the same purchased serial number.
That will leave you with the purchased activated serial number on two of your computers.
Adobe allows you the same purchased activated serial number on no more than 2 of your computers. So, nothing to do but to use one at a time.
Lots of scenarios beyond.
1. Deactivate Premiere Elements 13 from computer 1. Do not bother to uninstall. Deactivation is not the same as uninstall.
To deactivate, in an opened Premiere Elements 13 project, go to Help Menu/Sign Out. Close out of there.
Then do nothing, leave the program in the deactivated/installed state.
2. Deactivate and Uninstall Premiere Elements 13 from computer 1.
Any questions or need clarification, please let us know.
Thanks.
ATR

How can i display output in the same selection screen?

I've a requirement. Suppose in my selection screen there are three input fields. On the basis of this selection screens input It will display the output in the same selection screen. Can it be possible? .
Can it be possible to modify the default screen no for the selection screen 1000?
Thanks in advance.
Abhijit

Hi Abijit,
Whatever changes made in STANDARD SELECETION SCREEN 1000 or screens generated using 'SELECTION-SCREEN' statements, are not permanent.
It will get back to its original appearance, while you execute again or some time later.
Whenever you get into 'CHANGE' mode of these screens, an information will be displayed as follows ;
Selection screen: Report generation makes screen
changes ineffective
Regards,
R.Nagarajan.

I started with one itunes account for my iphone and ipad, and now have a second ipad linked to the same itunes. Can I set up a new itunes account for one ipad without losing what has already been downloaded on it?

I started with one itunes account for my iphone and ipad, and now have a second ipad linked to the same itunes. Can I set up a new itunes account for one ipad without losing what has already been downloaded on it? I want to stop my husbands downloads appearing on my ipad, and vice versa.

A much simpler solution would be to go into Settings > Store and turn off Automatic Downloads

I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

Just create a new AppleID for your work.
As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
However, you can put items purchased on on account onto the other iPhone.

Need to graph one DAQ output vs. a second DAQ output on the same graph.

Similar Messages

Maybe you are looking for