Need to know if it is possible to change the output print option in the deskjet 2545

The printer prints upside down ie when printing multiple sheets the last page is printed first and the first page last.We then need to again manually sort the order.My HP laserjet 9050 has the same issue if used without the sorter.Is there a solution for the same?

Hi vijayols,
Welcome to the HP Support forums. I gather you would like to learn how to reverse the print order when sending a multiple page documents to your Deskjet 2545 Ink Advantage printer.
I have included a document on print settings using Windows 8. In the section titled "Change print settings from the Windows 8 Desktop" there is a sub-section titled "Understanding Desktop print settings". It explains the various options available and one of them is the page order of the print job.
You mentioned that you have a Laserjet 9050. That is a commercial product so to get your issue more exposure I would suggest posting it in the commercial forums. You can do this at the link below.
Changing Print Settings in Windows 8
HP Enterprise Business Community
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

I need to know if it is possible to...

I bought a new computer...
and i am NOT creating a home network between the two...
It is possible for me to have internet on both computers at the same time to accomplish the following objective, but the internet on my orignal computer will not be permanent.
I need to know if it is possible to transfer my entire iTunes library exactly as is from one computer to another...
either by internet, or by transfering by DVDs or anything.
Again this has to be more than sharing, it has to be a complete transfer as the internet on the computer with iTunes already set up is not permanent.
If anyone could help me i would be extremely grateful
The original computer is a an HP pavilion PC, the second computer is a Notebook HP pavilion.
THANK YOU.

You can burn data CD's or DVD's of the content of your library, use those data discs to make the transfer to the second system. If all of the content is on an iPod, you can use your iPod to make the tranfer. see the following. Post back if you have any questions.
http://docs.info.apple.com/article.html?artnum=300173

Does anyone know if it is possible to change the display in week view to show 24 hours per day for those of us that work irregular hours

Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

Hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

Soory, no, it is not possible. You can only combine multiple copies of the same book into one order.
Regards
Léonie

I have bought a new Mac Book Pro, and I need to know how I can move Aperture from my old Mac Book to the new one..

I have bought a new Mac Book Pro, and I need to know how I can move Aperture from my old Mac Book to the new one..

It begins with: F-285-NER-151-QBQ-and continues with 5 more 3 or 4 letters/numbers..
Yes, that is the number. And what version of Aperture have you installed? The same version as on your old Mac?
But it don´t work on my new Mac...
In what way does it not work? Does it require you to enter a licence number for Aperture 2 as well? That will be necessary, if your serial number is an upgrade serial number. Then you will have to enter all previous numbers as well.
Or does Aperture not accept the number as correct? Then check the spelling; some letters are easily confused like "I" and "1" and "O" and "0". Do not use the number pad to enter the numbers.
See: Troubleshooting Professional Application Serial Numbers
Regards
Léonie

Is it possible to change a marker's color after the fact in Prelude???

I absolutely love Prelude as a program for logging my footage. I have a number of markers that have different colors but I'd like to know if it's possible to change a marker's color after it's been made. I know that this can easily be done in Premiere, but why not in Prelude???
In Premiere you can easily change a marker's color even way after after the marker was made...
...so why can't you change a comment marker's color in Prelude?
Conversely, why is it that Premiere doesn't respect the marker colors made in Prelude and instead defaults them all to green? This should be addressed in the next update.
Otherwise, there's no reason to have multicolored markers in Prelude if they all get changed to the default green once they appear in Premiere.

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Mac user, PS CC 2014 latest version. When using "Save for Web" I bring my 900 x600px @72 ppi in to SFW and the output becomes 300ppi. The only way it stays at 72ppi is if I check "none" for metadata. I know to should not matter much, but I would prefer to

Mac user, PS CC 2014 latest version. When using "Save for Web" I bring my 900 x600px @72 ppi in to SFW and the output becomes 300ppi. The only way it stays at 72ppi is if I check "none" for metadata. I know to should not matter much, but I would prefer to keep all my web jpgs @ 72ppi. Any solutions?

It opens up as 900x600 @300ppi
Here's a screenshot-

Is it possible to change an IDOC and save on the same IDOC number..?

Hi all,
I have an IDOC. When I processed the IDOC, it ended up with error status '51'. There was some problem with the data. So, I changed the data and reprocessed using the T-Code 'WE19' and it was processed successfully. When we reprocess the IDOC using 'WE19', it generates another IDOC number. But, the client is asking that, it should not generate another IDOC number. When we change the IDOC number, it should be saved under the same(ORIGINAL) IDOC number. Is it possible to change an IDOC and save under the same number..? Is there any transaction code to do so. Please give your valuable inputs.
Thanks in advance.
Thanks & regards,
Paddu.

Hi,
You can use the transaction WE09..to edit the IDOC data...
Then use the transaction BD87 to post the IDOC..
Thanks
Naren

Possibility to change Subtitles and Audio Options

Hello everyone,
I'm from Germany and I have a questions regarding the audio options in TV Series.
Since the release date for series in Germany is far behind the US, I really like the opportunity to purchase season-passes for the US-versions.
But since the language sometimes is hard to understand I also like the possibility of subtitles.
But since iTunes is not offering the possibility to change subtitles or audio options (from english to german, once the german audio is available) I have two options:
1.) Decide for one option (english, english with german subtitles or german)
2.) Buy more than just one version of the series
Personally I don't think that any of those two options are customer-friendly.
I just don't understand, why it isn't possible to switch between audio-options and subtitles once you've paid of the series. I mean, when I go to the store and buy a Blu Ray - no doubt I can do so. And technically it is no problem.
I would love to hear feedback!
Best regards.

It's not iTunes or Apple's decision, the audio and/or subtitle options that are available on a version of a TV series (or film) in a country's store are set by the rights-holders - they decide what options are available on a release (and whether to release different versions in the same country), all Apple does is put it into the stores in the countries where they've been granted a license to do so.
And if you are in Germany then you can only use the German iTunes Store, you cannot use the US store unless you are in the US

Need to know if this is possible...

It has been a while since I've worked in Java, so I'm not even sure what I'm wanting to do is possible. The basic principle behind what I'm trying to do is a print queue, here are the specifics:
1> Files in either PDF or .xlsx should be loaded into a folder called DailyPrint on a network drive. (We'll call it's path Z:\Invoices\Dailyprint)
2> at the end of the day someone in the office who is not tech savvy needs to be able to print 3 copies of every file in the folder.
3> The paper in the tray is loaded in the following color scheme : White, Yellow, Red (3 part invoice paper)
4> The print job needs to print out the files in the following order so that we get a white, yellow and red copy of each file: 0001.pdf (first copy); 0001.pdf (second copy); 0001.pdf (third copy); 0002.pdf (first copy); etc; etc.
5> The printer that these will print to is a network printer, not hooked to any particular station.
The following information is static, and would have no reason to let people change it:
The printer to be used
The paper tray to be used
The path to the Folder
The number of copies (hard coded to 3)
The order in which the files/copies are printed
I know that printing from PDFs has been called difficult in other discussions, and I know that I would probably have to use a DocFlavor line to make sure that it printed them correctly, but I need to know if what I am trying to do on this project is possible or if I'm going in a completely wrong direction. Any help would be appreciated.
Thank you in advance.

The biggest concern for us is the batch aspect, due to the fact this is not a dedicated printer, so it is better for us to tie it up for 20 minutes at the end of the day rather than constantly put 3-part paper into the printer for each invoice. We only have one computer with the full Adobe Acrobat, the rest have Microsoft's "Save as PDF" plug-in for Excel/Word, so we can make each file into a PDF but at the end of the day when we want to batch print all of the invoices for the day we could only come up with 3 possible senarios:
1> Stop producing invoices 1 hour before end of day, and have one user go into the "dailyprint" folder from the computer with Acrobat, compile all of the individual PDFs into one massive PDF and then do a group print of three copies.
2> Stop producing invoices 1 hour before end of day, separate the invoices into several groups and have the 3 people in our department (it's a very small office, I'm both the technical lead and an underwriting assistant.) print them out, doing three copies of each (and hoping that someone doesn't forget to change the "copies" setting to 3)
3> Write a program or find a program that would allow us to batch print 3 grouped copies of each file in the "dailyprint" folder.
Because I used to program a lot in Java I figured I would look into #3 and see if it would be a time saver or if option #1 would be better. I think our next biggest concern would be to make sure that it printed to the correct printer, which is why I was wondering about hardcoding the specific printer in the program. After looking through the Print Service API guide and seeing people's responses it does look like a program would be possible, but hard coding the printer, or even giving a drop down box to select which printer, is going to be the hard part of this whole thing.

I need to know if it's possible to retrieve deleted text contents

Is possible to recover deleted text content from my husband's iPhone 5?

Only if you have a backup on your computer or iCloud. The iPhone doesn't have a Trash Can or Recycle Bin. So if you delete something it's gone forever.
You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

Hi I'd like to buy a creative suit cs4.. an American one and I'd like to know if it's possible to change the language into German?

I'm working for an German office and my collegaues would like to use the creative suite cs4 for their projects. The original German version is quiet expensive -- that is why I'd like to buy an American one... unfortunately my collegaues are not in English so.. is it possible to change the langauge in the standard design cs4 version?

Adobe no longer sells CS4. They only sell new versions of their products. Beyond that, you cannot purchase an American copy if your company is based in Germany.

Is it possible to network a AIO Printer and use the Scanner and Fax on all computers.

I have a small network on a Peer to Peer. I have a non network printer. HP Deskjet 3050. Currently the printer and applications for Fax and Scan are installed onto two workstations. One computer has the printer directly connected via the USB. This system is sharing the printer on the network as a host.
The other computers are printing from the share without error but I cannot scan or fax with the "client" workstations. I receive an error indicating the printer is not connected. My question is: Is there any possible way to share the Fax/scan feature throughout the entire network?
I thought of purchasing a Network "Print-Server" but have heard they don't work and I need to buy a "Network Printer".
Any help and advice would be greatly appreciated.
Thanks!

I don't think there is such thing as scan sharing in Windows.
Why not just buy a wireless printer? I'd recommend that way more than a wireless print server (which don't support scanning, only printing - as far as I know).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Is it possible to change a SAP BW password from the BI Launchpad?

Hello,
We are currently running:
Business Objects 4.1 SP4
Apache Tomcat Web Server
SAP BW 7.3 SP 7, ABAP stack only
We are using SAP BW as our primary EDW with BI 4.1 as a front end for Reporting and Analytics. SAP Authentication is enabled in BOBJ and that is used as the authentication method for all users. The majority of our user have no reason to ever log onto BW as all of their BI content is attainable through the BI Launchpad. (Analysis and Design Studio)
When a new user is created in BW, it is mandatory by policy for them to change their password upon first login. However, the only way they can do this is by logging in to the SAP GUI to BW. Can this be achieved somehow through the BI Launchpad?
Thank you
Scott

It is not possible to change it in LaunchPad unfortunately, workarounds are discussed here:
http://scn.sap.com/thread/3355098
Best regards,
Victor

Need to know if it is possible to change the output print option in the deskjet 2545

Similar Messages

Maybe you are looking for