Need to output sound in CVI project through sound card

I've been adding a software mod to one of our long standing projects, that involves sound output. Certain pieces of our kit require orientating in a certain way before they can be calibrated, but due to them also being adversely affected by magnetic fields and large lumps of ferrous metal, they are often positioned well away from whereever the PC is that is being used to calibrate them. I've come up with a solution that involves a series of beeps transmitted via walkie talkie, a bit like sonar pings, that can be used to determine when the kit is within tolerance of its required position. Unfortunately whilst developing I hadnt realised that the StartPCSound / StopPCSound only worked on the internal speaker, as I develop on a laptop where all the sound comes through the same speakers. However now I would like to be able to output this sound through external speakers, so can no longer use this functionality - shame as its very easy to use.
So firstly, I'm pretty sure I know the answer to this but I'll ask anyway - is there anything already in LabWindows CVI that would allow me to do the same sort of thing as StartPCSound - I'm not after glorious sound quality - a square wave will be just fine!
Secondly, has anyone come across any easily configurable .NET or C++ libraries that would allow me to do something similar, and if so can you share you experiences and if possibly some code examples to get me started.
Regards
Gavin Summers

I had looked at playing wav files as an option. However I'd need a few. My post originally was a bit misleading as sonar pings are all the same frequency, but closer or further apart. My original solution keeps the pings the same distance apart, but varies the pitch, so as you get closer to the desired alignment, the pings get higher in pitch. When the desired alignment is reached you get a two tones one after another.
However having said that the way you've suggested isn't actually a bad idea, and I certainly could make use of it. Record two tones, use one played at differing frequencies depending on how close to required position I am, and then the other continuously when within acceptable range. I'll check wav playing out as an alternative option.
Cheers

Similar Messages

I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio t

I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio tracks - specifically one stereo pair to be t1&t3, the other stereo pair to be t2&t4. This is the standard way requested by an international distributor of tv programmes. I understand how to set the sequence in FCP to output 4 audio tracks - either 2 stereo pairs (1&2, + 3&4), or 4 discrete tracks. But how do I then output this as a QT file?
The manual tells me that to export multiple audio tracks, File>Export>QT Movie has it's Config pop-up menu in the Audio Settings area of the General tab of the Sequence Settings. Well, that's set for 4 discrete channels, but the QT export settings only allow for 2 mono or 1 stereo output, and that's what I get when I try it. What it says in the manual just doesn't happen.
Exporting via Compressor, on the other hand, has an abundance of choices of 4-track outputs, none of which are labelled as anything resembling 'discrete'. Would any of those 4.0 settings suffice? Or am I likely to get myself into difficulties further down the line? As I am monitoring for this task on a 2-track audio system, I cannot confirm exactly what I am getting when I use any of those settings.
Any advice would be greatly appreciated!
John

Call me naive, but I've not heard of splitting the stereo pairs like this before.
What broadcaster? (perhaps one of our EU regulars will drop in...)
You can do all sorts of pairing but it is coincident tracks pairing- eg 1/2 + 3/4
Sorry I can't offer anything.
x

Unable to make sound from Keyboard come through monitors.

Basically I have purchased the M-Audio Oxygen 49 Keyboard and I have it plugged in through my USB connection on my Macbook where the input connection is being picked up fine through Logic Pro. However, I want to direct the output sound to go through my Firewire interface to a pair of monitors, but instead the sound just comes out through my Laptop Speakers.
CAN ANYONE HELP?!!
I have set the input - under 'System Preferences' - to come from the 'Line In' port, and the Output to go through my interface.
Is there an option box in Logic that I need to access to fix it or can it not be done?
All suggestions will be greatly appreciated.
Many Thanks

Just choose your Audio Interface in Logic->preferences->Audio->devices and you will hear sound.
Your USB-Midi keyboard is not producing any sound, it just generates Midi events - all the Audio is produced inside Logic so fiddling around with your System prefs will not do you any good.
So select a Software Instrument, play your keyboard and you'll be fine. The getting started guide might give you a further insight into the basics of Logic.

LabView "Guru" needed for the summer (4 month project) Kalamazoo, MI

LabView "Guru" needed for the summer (4 month project)
I am looking to hire a LabView "Guru" for a summer project in Kalamazoo, MI that will last 4 months. Specifically, the ideal person will have the following:
LabView expert with a minimum of 7-15 years of experience working with LabView (currently using version 6.1).
80% of the job will be dissecting and interpreting mature LabView code and then re-engineering it to be used for testing.
Printed Circuit Board experience a plus.
4 year degree (BSEE preferred, but expertise in LabView takes priority over degree)
The pay will be $60/hr and you can plan on overtime of at least 10 hrs each week that will be paid at $90/hr.
Please call 616-855-4600 if you need more information and email a "word" copy of your resume to [email protected]

Sounds like Parker-Abex (LabVIEW 6.1 part)
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

What specs. do I need to look at to not get chirping sounds at the end of a sound fi

Hi all,?I am trying to run an experiment for a doctoral project and I need some help. I have a really expensi've sound card called the lynx one that I have no problems with. Recently my school purchased the soundblaster x-fi extreme audio sound card because we are testing to see if we can use a cheaper sound card and get the same results. However, at the end of certain sound files, we get a chirping sound from the soundblaster which is the end of the clip being cut off. It is like the release time of the file or something, but we can't mess with the cli
ps.
Also it doesn't do that for the lynx one so we know that some sound cards will not allow you to hear the cut off. Any advice on what specifications to look at etc to not hear the chirping sound but still getting a sound card that isn't 500 dollars? Thanks!

This one is good:
http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter

I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen

I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen.

Go to System Preferences>Sound>Output and make sure that you selected the right output. I think if yo use HDMI you might not be abe to select another output.

Need to send Smart form via email through Driver program

Hi All,
We need to send smart form via email through a new driver program (z program). Can you please guide me on this.
I have used the following code to achieve this. We are getting message saying 'Mail request has created' when executed, but the mail is not sent.
lvs_comm_type = 'INT'.
lvs_comm_values-adsmtp-SMTP_ADDR = e_mail.
lvs_comm_values-adsmtp-R3_USER = 'X'.
lvs_comm_values-adsmtp-ENCODE = '0'.
call function 'CONVERT_COMM_TYPE_DATA'
exporting
pi_comm_type = lvs_comm_type
pi_comm_values = lvs_comm_values
pi_screen = ' '
pi_newid = 'X'
importing
pe_itcpo = lvs_itcpo
pe_device = lvf_device
pe_mail_recipient = p_mail_recipient
pe_mail_sender = p_mail_sender
exceptions
comm_type_not_supported = 1
recipient_creation_failed = 2
sender_creation_failed = 3
others = 4.
if sy-subrc ne 0.
raise COMMUNICATION_ERROR.
endif.
control_parameters-device = 'MAIL'.
output_options-TDIMMED = 'X'.
output_options-TDDELETE = 'X'.
CALL FUNCTION fm_name
exporting
CONTROL_PARAMETERS = control_parameters
MAIL_RECIPIENT = mail_recipient
MAIL_SENDER = mail_sender
OUTPUT_OPTIONS = output_options
USER_SETTINGS = space
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
Thank you

Hi,
For sending smartform output into mail you first have to generate spool request and convert it into PDF and then
only it can be sended into mail, please find the sample code in the mail below:
http://wiki.sdn.sap.com/wiki/display/sandbox/ConversionofSpoolRequestDataintoPDFandExcelFormatandSenditintoMail
Mansi
Edited by: Matt on Jan 29, 2010 8:25 AM - removed code, instead point to wiki that Mansi authored.

(CS4) Copy and paste video/sound into another project, sound won't export

Hello Adobe community
I am working on a TV show for a community television network in Australia. I created the opening credits in a seperate project to the edited footage of the show, because my computer is struggling with the size of all the files. So I have two project files. Recently I copied and pasted the edited footage of the show into the project where I have the opening credits (by highlighting all the footage, right clicking and going to copy, then opening the Project with the credits sequence, right clicking and selecting paste). This seems to work. I can hear the sound and continue tweaking and editing. However, when I export the project, the sound from the footage I have copied into the project can't be heard. I can hear the sound from the credit sequence, but not the sound that has been copied into the project (although on the timeline of the project, I can hear the sound... This problem only presents itself after export).
I have tried doing the opposite... Copying and pasting the opening credit sequence into the project with the edited footage, and I get the same problem. It doesn't seem to matter which file type I export as. I have tried .AVI and .MPEG2, with the same results.
I am using Windows 7 64bit version, and Premiere CS4. I have a mixture of .MTS, .WAV and .MP3 audio files in the footage that I copy and paste across. None of them are exporting.
I have tried moving the copied and pasted audio files on to the same audio tracks as the sound already in the project, but this doesn't work either. The original sound will export, then when it gets to the copied and pasted sound nothing can be heard.
I have included some screen shots to illustrate the problem below. If you have any questions please let me know.
Thanks for your time! I have a looming deadline so your help is much appreciated.
-Robert

Thanks for your replies everyone. Sounds like cut and paste is not an option. Wow, I didn't realise how much trouble I'd be causing for myself by having different parts of the show in different projects.
I am reluctant to export the project then import it into another project, because I do not want to lose quality through compression as Ann suggests.I don't know what you mean, Ann, when you say "Dont think CS4 could import single sequence (forgot)."? Jim, I'm also unsure what you mean when you say "That's what UT is for"?
However, I went to File/Import/Import Entire Project, and imported the project this way. Then I dragged the little folder icon that appeared in the top left hand corner of the screen onto the timeline. However, when I did this, a few problems occured. Firstly, the original project had footage and audio on many different tracks, but when I imported the project nearly all of the video and audio was on to the one track. Secondly, instead of going for 10 minutes, the imported footage went for a few hours. Thirdly, the sound and images were all out of sync. I have included two images to illustrate this problem:
Above is the original project. As you can see, I have audio and video on many different tracks, and lots of cuts.
This is what the project looked like after I had imported it into another project. Nearly everything is on one track, the footage goes for a few hours now (instead of 10 minutes) and the video and sound are all out of sink.
Then I tried File/Import/Import Selected Sequence. The only sequence I had the option of importing was Sequence 1. I did this, then dragged the folder icon onto the timeline, and I had a similar problem to before. Everything on one track, footage out of sync and going for a few hours.
Is there a way to import a project and maintain all of the editing (the cuts, the multiple tracks, etc.) as they are in the original? I have spent many hours editing both the footage and the opening credits, so I really don't want to lose all this work when I import one into the other. The good thing about copy and paste is that it maintains all of the original cuts and editing. Shame it is so unreliable.
Thanks heaps for all your help!
-Linus

Compiling CVI project with low-level input/output function under VC++

when compiling I get:
MIN69101.OBJ : error LNK2001: unresolved external symbol _read@12
MIN69101.OBJ : error LNK2001: unresolved external symbol _write@12
MIN69101.OBJ : error LNK2001: unresolved external symbol _lseek@12
Release/minil.exe : fatal error LNK1120: 3 unresolved externals
Error executing link.exe.
minil.exe - 4 error(s), 0 warning(s)
I think I need some libs.
Who tell me what .lib I need?

When you convert your existing CVI project, all external libs add automatically, you can see it in Project->Settings->Link.
But they don't include low-level in/out function.
If you use Dependency Walker you can see these functions in cvi-lvrt.dll, but not in cvi-lvrt.lib

How to create Sales Quotation from project through DP81

Dear Guru's,
How to create Sales Quotation(VA22) from project through DP81, what all the customization settings are required for this functionality; please explain me all the step those are required for this process.
Regards,
Sai

Hi,
You can use DP81 and DP82 to create Quotations .
If you want to use DP81 then you need to link Sales Inquiry with Project by entering the WBS Element in Account Assignment Tab of Inquiry and also enter the DIP Profile in Sales B View.
Else you can carry sales pricing without the creation of Inquiry.Enter the DIP Profile ,Dist Channel,Division in control data tab of project and also enter Sold to party in Partner tab.
See SAP help for customisation of DIP Profile .
Muzamil

The option "Build-in Output" does not appear under my Sound preferences

The sound stopped coming out of my built in speakers. The sound does come through headphonse. The option "Built-in Output" does not appear under my Sound preferences. How can I restore the Built-in Output option under my Sound preferences. Currently the only option that displays is "Digital Out".

Please stop sticking things in your audio ports. you can very easily damage the switch. There is a simple procedure that usually will switch your mac back to internal speakers.
1. open the Audio MID setup app in your utilities folder.
2. Select 'built in output'
3. try the 'source' pull down menu. probably it will read 'digital out' with no other options.
4. control click the 'built in output' option on the left and select 'configure speakers' from the pull down menu.
5. a drop down window will open. Make sure 'Stereo' is selected and click 'done'
6. The Source pulldown menu should now read 'internal speakers'
7. Close the Audio MIDI setup app and get back to work

Multi output sound device and 5.1 sound

Hi,
I have following setup:
TV is connected to the Mac Mini, with HDMI Cable.
Amplifier (5.1) is connected to the Mac Mini, with Toslink cable.
In addition to that TV can pass sound to amplifier through another toslink cable.
Currently my setup works perfectly:
When I set sound output to HDMI, TV recognizes 5.1 sound (also it can be passed to the amplifier).
When I set sound output to digital audio, amplifier gets 5.1 sound.
Note: 5.1 sound works when I play movies from VLC. In audio setup (in preferences and midi setup) there is only possibility to have 2 channels.
What I want to do is to have the same output to both devices.
I created multi output device, for HDMI and digital audio, and devices get only stereo sound.

Thank for your reply, however it didn't solve my problem.
I can send surround sound over hdmi to TV, and then TV can send it to the amplifier.
What I can not do is to send surround sound directly from Mac Mini to TV (via HDMI) + amplifier (via toslink) - so that I can switch off TV and have sound on amplifier.
I also have the multichannel options options greyed out (as described in this thread: https://discussions.apple.com/message/19584051). But what I am talking about is sending sound as Dolby (which can be done with VLC), not PCM.

Report is executing in background and need data(output) in excel format

Report is executing in background and need data(output) to get downloaded in excel format in my PC from an internal table;;in any drive i.e. C: or D: .When executing in backround it prompt to user with which location excel file to be saved and the name of file.How to download in background in excel format?
Edited by: PRASHANT BHATNAGAR on Aug 26, 2008 6:24 AM

Hi
Download a report to excel with format (border, color cell, etc)
Try this program...it may help you to change the font ..etc.
Code:
REPORT ZSIRI NO STANDARD PAGE HEADING.
this report demonstrates how to send some ABAP data to an
EXCEL sheet using OLE automation.
INCLUDE OLE2INCL.
handles for OLE objects
DATA: H_EXCEL TYPE OLE2_OBJECT,        " Excel object
      H_MAPL TYPE OLE2_OBJECT,         " list of workbooks
      H_MAP TYPE OLE2_OBJECT,          " workbook
      H_ZL TYPE OLE2_OBJECT,           " cell
      H_F TYPE OLE2_OBJECT.            " font
TABLES: SPFLI.
DATA H TYPE I.
table of flights
DATA: IT_SPFLI LIKE SPFLI OCCURS 10 WITH HEADER LINE.
*&   Event START-OF-SELECTION
START-OF-SELECTION.
read flights
SELECT * FROM SPFLI INTO TABLE IT_SPFLI UP TO 10 ROWS.
display header
ULINE (61).
WRITE: /     SY-VLINE NO-GAP,
          (3) 'Flg'(001) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (4) 'Nr'(002) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Von'(003) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Nach'(004) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (8) 'Zeit'(005) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP.
ULINE /(61).
display flights
LOOP AT IT_SPFLI.
WRITE: / SY-VLINE NO-GAP,
           IT_SPFLI-CARRID COLOR COL_KEY NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CONNID COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYFROM COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYTO COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-DEPTIME COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP.
ENDLOOP.
ULINE /(61).
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-007
       EXCEPTIONS
            OTHERS     = 1.
start Excel
CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
PERFORM ERR_HDL.
SET PROPERTY OF H_EXCEL 'Visible' = 1.
CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls'
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-008
       EXCEPTIONS
            OTHERS     = 1.
get list of workbooks, initially empty
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP.
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - start
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTING #1 = 2.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP EXPORTING #1 = 2.
PERFORM ERR_HDL.
tell user what is going on
SET PROPERTY OF H_MAP 'NAME' = 'COPY'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - end
disconnect from Excel
     CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'C:\SKV.XLS'.
FREE OBJECT H_EXCEL.
PERFORM ERR_HDL.
      FORM FILL_CELL                                                *
      sets cell at coordinates i,j to value val boldtype bold       *
FORM FILL_CELL USING I J BOLD VAL.
CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
PERFORM ERR_HDL.
SET PROPERTY OF H_ZL 'Value' = VAL .
PERFORM ERR_HDL.
GET PROPERTY OF H_ZL 'Font' = H_F.
PERFORM ERR_HDL.
SET PROPERTY OF H_F 'Bold' = BOLD .
PERFORM ERR_HDL.
ENDFORM.
*&      Form ERR_HDL
      outputs OLE error if any                                       *
--> p1        text
<-- p2        text
FORM ERR_HDL.
IF SY-SUBRC <> 0.
WRITE: / 'Fehler bei OLE-Automation:'(010), SY-SUBRC.
STOP.
ENDIF.
ENDFORM.                    " ERR_HDL
Regards
Murali Papana

Error while creating project through import.wdl

Hi
We are having issues creating project using the import.wdl.
We are able to create content administration and merchandising projects though.
We are getting the following error while creating a programatic import project through import.wdl
[12/8/13 23:26:27:259 CST] 00000021 SystemErr     R atg.workflow.WorkflowException: The inner project was not created. Check that your project workflow has been initialized by the workflow engine.
[12/8/13 23:26:27:260 CST] 00000021 SystemErr     R at atg.epub.project.ProcessHomeMethods.initializeProcess(ProcessHomeMethods.java:450)
[12/8/13 23:26:27:260 CST] 00000021 SystemErr     R at atg.epub.project._ProcessHome_Impl.initializeProcess(_ProcessHome_Impl.java:53)
[12/8/13 23:26:27:260 CST] 00000021 SystemErr     R at atg.epub.project._ProcessHome_ReposImpl.initializeProcess(_ProcessHome_ReposImpl.java:3)
[12/8/13 23:26:27:260 CST] 00000021 SystemErr     R at atg.epub.servlet.CreateProcessFormHandler.handleCreateProcess(CreateProcessFormHandler.java:380)
We have checked all the workflow manager settings. The workflowProcessManager.xml is properly pointing to the system name and drp port.
We had delete entries from
epub_wf_server_id
epub_coll_workflow
epub_workflow_info
dss_server_id
dsi_server_id
upon enabling the logdebugs of WorkFlowProcesManager, we are seeing the following debugs.
[12/8/13 23:31:08:101 CST] 00000020 SystemOut     O /atg/epub/workflow/process/WorkflowProcessManager received message on port IndividualEvents message: ObjectMessage()
[12/8/13 23:31:08:101 CST] 00000020 SystemOut     O /atg/epub/workflow/process/WorkflowProcessManager [message]: received an individual event message StartWorkflowMessage[messageId=96000003subjectId=prc272003,subjectType=process,processName=/Commerce/import.wdl,segmentName=main,user=user : admin null] of type atg.workflow.StartWorkflow
[12/8/13 23:31:08:101 CST] 00000020 SystemOut     O /atg/epub/workflow/process/WorkflowProcessManager [message]: created individual execution context ProcessExecutionContextImpl[individual,subject=process:prc272003,messageType=atg.workflow.StartWorkflow,message=StartWorkflowMessage[messageId=96000003subjectId=prc272003,subjectType=process,processName=/Commerce/import.wdl,segmentName=main,user=user : admin null],sessionId=Tw-Yr5CQqqkADS3q8MadASz,parentSessionId=Tw-Yr5CQqqkADS3q8MadASz,request=atg.servlet.DynamoHttpServletRequest@1009990707,response=atg.servlet.DynamoHttpServletResponse@3c9e3c9e]
[12/8/13 23:31:08:103 CST] 00000020 SystemOut     O /atg/epub/workflow/process/WorkflowProcessManager [message]: 0 individual instances found for subject process:prc272003
[12/8/13 23:31:08:103 CST] 00000020 SystemOut     O /atg/epub/workflow/process/WorkflowProcessManager [message]: going through process segments registered for type atg.workflow.StartWorkflow for subject process:prc272003

If you have a support contract with Orcale you can find out hoe to fix this error by checking out Knowledge Article 1038072.1 How to troubleshoot "atg.workflow.WorkflowException: The inner project was not created. Check that your project workflow has been initialized by the workflow engine."
The article says you should:
1.
delete from epub_wf_server_id
delete from epub_coll_workflow
delete from epub_workflow_info
restart server and retest
2. If problem exists check that you have configured the Workflow Process Editor Server correctly.
The problem is that probably the workflow has not been not been initialized correctly by the Workflow Editor Server.

Need help in exporting my FCP project to work on my laptop

I'm taking a long trip and I'd like to export all that's needed to work on my FCP project from my PowerMac G5 to my Powerbook Pro. I could really use some advice on this.
1. It's most likely that all of my files will not fit on the Powerbook hard drive (half is devoted to Windows). I know there are issues with importing footage to a firewire drive, but what if my footage is already imported? Can I get a tiny firewire external drive and move all my video files to work with? Or will I still be at a risk of dropped frames or other problems? Can I even get a USB drive for this? WD makes a great tiny one. I've got a huge Maxtor firewire drive, but I need one that is portable and doesn't need external power. Any recommendations? Is this just a stupid question and there's no way this is possible?
2. Will I run into a problem of installing my Final Cut Studio on my Powerbook Pro since it's already installed on my PowerMac? I guess if I absolutely had to, I could uninstall FCP from my Powermac, then install it on my Powerbook, then uninstall it from my powerbook when i'm done with my trip, then reinstall it on my PowerMac. But it'd be much simpler if I could just install it on my Powerbook and leave the already installed version on my PowerMac alone.
I'd love some advice with this. Thanks!

I'm taking a long trip and I'd like to export all
that's needed to work on my FCP project from my
PowerMac G5 to my Powerbook Pro. I could really use
some advice on this.
First, do you mean Macbook Pro? Also what version of FCP are you running? If you have a Macbook Pro then you must have FCP 5.1 in order for it to run on your notebook.
1. It's most likely that all of my files will not fit
on the Powerbook hard drive (half is devoted to
Windows). I know there are issues with importing
footage to a firewire drive, but what if my footage
is already imported? Can I get a tiny firewire
external drive and move all my video files to work
with? Or will I still be at a risk of dropped frames
or other problems? Can I even get a USB drive for
this? WD makes a great tiny one. I've got a huge
Maxtor firewire drive, but I need one that is
portable and doesn't need external power. Any
recommendations? Is this just a stupid question and
there's no way this is possible?
You are correct in assuming that you need not put your media files on your system drive. Get a small Firewire drive that is bus powered, I recommend on from G-Technologies, maker of the G-Raid.
2. Will I run into a problem of installing my Final
Cut Studio on my Powerbook Pro since it's already
installed on my PowerMac? I guess if I absolutely had
to, I could uninstall FCP from my Powermac, then
install it on my Powerbook, then uninstall it from my
powerbook when i'm done with my trip, then reinstall
it on my PowerMac. But it'd be much simpler if I
could just install it on my Powerbook and leave the
already installed version on my PowerMac alone.
This depends on what version you are using. I believe that you can have 5.1 installed on both a desktop and notebook with one license. However, be sure to check the license that came with your software just to be sure. If you do not have 5.1 (and you don't have a MBP but instead a Powerbook (not Pro) then you will have to uninstall and reinstall.
Once you have these issues worked out it is a matter of transferring your project files to your new FW drive.
2 - PowerMac G5 2.0Ghz DP Mac OS X (10.4.6) 1- Mac Mini

Need to output sound in CVI project through sound card

Similar Messages

Maybe you are looking for