Compiling CVI project with low-level input/output function under VC++

when compiling I get:
MIN69101.OBJ : error LNK2001: unresolved external symbol _read@12
MIN69101.OBJ : error LNK2001: unresolved external symbol _write@12
MIN69101.OBJ : error LNK2001: unresolved external symbol _lseek@12
Release/minil.exe : fatal error LNK1120: 3 unresolved externals
Error executing link.exe.
minil.exe - 4 error(s), 0 warning(s)
I think I need some libs.
Who tell me what .lib I need?

When you convert your existing CVI project, all external libs add automatically, you can see it in Project->Settings->Link.
But they don't include low-level in/out function.
If you use Dependency Walker you can see these functions in cvi-lvrt.dll, but not in cvi-lvrt.lib

Similar Messages

Export Error, Error compiling movie. "A low-level exception occurred in: H.264"

Hi
I'm still learning AE. I'd appreciate any help. I can export to Windows. Can't export to Vimeo SD 25 fps in H.264 either. When I try to compile via media encoder the following I get this message.
- Encoding Time: 00:00:00
07/30/2013 03:01:03 PM : Encoding Failed
A low-level exception occurred in: H.264 (Exporter)
Export Error
Error compiling movie.
Unknown error.
Movie Spec screen grabs:

Update: no error on the following, media encoder didn't throw any errors... must be the project. Disk cache is 120GB BTW. I was able was unable to run through YouTube HD 1080P 23.96 FPS.

Can I use textfield in an application with low level api?

Hello !
I am developing a mobile application using the low level api.
I have to use it, because I do a lot of coloring.
But I want to use high level textfields as well. Is there any way
to include them in my application without using forms?
Does any one know, why J2ME designer's have limited the access
to the TextField's paint()-method? That's why I cannot inherit
from TextField and overwrite the paint() as I would like to do.
Thanks.

Unfortunately no. You cannot mix both high and low level on the same screen. You'll probably have to draw it out yourself and capture user input, unless you're willing to use textboxes.
Or.. i suppose you can try using customItems for all your "coloring" instead?

Compiling a project with referenced VI

Hello All,
-I am referencing a VI in my project using Open VI Reference (see attachment).
-The VI is under a folder in my Program Files directory and is referenced statically in my project, and is separate from my project folder. So there is no calling VI for my reference VI, which has four sub-VI contained therein.
-Now my referenced VI is part of my project, even though it has no calling VI.
Does it need to be in my project? I would think not, since there is no direct link to the referenced vi inside my project, aside from the static file path.
How does the app. builder treat this referenced VI when it creates an .exe? Does it leave the referenced VI in the Program Files directory since that is the reference path or does it get included with all the other compiled VIs into the executable? Should it be removed from my project? Perhaps I am missing something and need to create the referenced VI as a separate build. I don't know.
Any information you can give would be greatly appreciated. Thanks.
Reese
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home
Attachments:
reference vi open fp.png ‏28 KB

I'm sorry Mike, but I want to be clear on what you are saying. Are you saying NOT to include it in my project but rather include it in the "always included" box in the application builder?
What do you mean by "You shouldn't do it, because your fixed path would be wrong." What shouldn't I do? Add it to my project? I asked a lot of questions and am not sure to what you are referring.
Thanks again for the reply.
Reese
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

How do I compile CVI librarys with GCC

I am trying to compile with the CVI library using the cygwin/gcc compiler.
When I link in c:/cvi/extlib/cvisupp.lib
I get the following errors:
/bin/ld: Warning: type of symbol `___ExeSymbols' changed from 776 to 264 in glbltbl.c
/bin/ld: Warning: type of symbol `___UICallbackSymbols' changed from 776 to 264 in cbacktbl.c
/bin/ld: Warning: type of symbol `___CVILibSymbols' changed from 776 to 264 in cvitbl.c
/bin/ld: Warning: type of symbol `___ANSILibSymbols' changed from 776 to 264 in ansitbl.c
collect2: ld returned 1 exit status

You should try asking this on LabWindows CVI forum at http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=8&RFORMNUMBER=2&RHIDETAG=TRUE&UCATEGORY_0=_46&UCATEGORY_S=0
Good luck

Problem compiling a project with FORTE

Hi, thanks in advance ,
I've installed FORTE 6 update 2 and all has gone ok .
I've built two projects without problems.
But building a big project i've found nexts problems :
bash-2.03# /opt/SUNWspro/bin/makeprd myproject_file.prd
ild: (undefined symbol) st_key_create -- referenced in the text segment of output/b.o
ild: (undefined symbol) st_key_create -- referenced in the text segment of output/a.o
ild: (undefined symbol) mysql_store_result -- referenced in the text segment of output/a .o
ild: (undefined symbol) mysql_num_rows -- referenced in the text segment of output/b.o
*** Error code 5
dmake: Fatal error: Command failed for target `output/final_file'
All the files has compiled ok less files makes calls to a MYSQL and ST library .
I've already tell to my prd where found a library in mysql ( /usr/local/mysql/lib and include ) and ST library ( $HOME/st.h and st.a" ), but i don't understand why ild can't found this symbols ...
In mysql.h you can find :
mysql_store_result , mysql_num_rows
and in the st.h the other functions ...
I've found declarations( in .h) and functions ( in .a )
What's the problem ?, anybody can help me ?
Thanks

I'm sorry Mike, but I want to be clear on what you are saying. Are you saying NOT to include it in my project but rather include it in the "always included" box in the application builder?
What do you mean by "You shouldn't do it, because your fixed path would be wrong." What shouldn't I do? Add it to my project? I asked a lot of questions and am not sure to what you are referring.
Thanks again for the reply.
Reese
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

Compile Netbeans Project with

I've seen other NetBeans questions in this forum, so I think it is appropriate to post here.
I'm using NetBeans 5.5 and I'm getting the "you're using a deprecated method" warning. How can I configure NetBeans to compile with
-Xlint:deprecation?
Thanks...

Actually, you should post NetBeans questions to
http://netbeans.org

NAC - Using ActiveX web agent with low level user

Hi:
I have NAC installed in-band and running. We have a group of test taker with user rights to the PC. The ActiveX web agent will not load and the Java agent does not start.
Any suggestion o dealing with some low secuirty issue and the browser.
Thanks
Dan

Hi Eduardo,
We can check all the requirement rules, but notes,
this check is works well with native win agents, so I assume the CAM Requirements and Rules side is ok.
Pls. confirm, there is no matter how I'd like to check win patches (via web or with client) at Checks/Rules/Roles/Requirements config.
Attila

Low level disk access using win API libraries

Hello All,
One of my project requires "low level access to the drives (usually pen Drive)' for analysis. I think this is possible using WIN API functions, i tried to read using kernal32.dll but i am unable to complete the task effectively, since i dont have sufficient exposure to text oriented languages. Basically i need to read the memory as it is stored, just like stream of bytes. Could any one guide me how do i proceed inorder to get rid of this.
thank you.

Unfortunately no. You cannot mix both high and low level on the same screen. You'll probably have to draw it out yourself and capture user input, unless you're willing to use textboxes.
Or.. i suppose you can try using customItems for all your "coloring" instead?

High level and low level grabs

Hi, I'm looking at different acquisition options. Fast acquisition is a priority as is fast processing. I'm a little confused on high level versus low level. Is there any benefit to which one is used? Or is it 6 one way and 1/2 a dozen the other. Thanks

If you feel comfortable using the Low Level functions I would personally recommend using them instead of the High Level. Bruce's answer is correct, high level will call low level with standard options selected. If you think of ways to improve the speed of your code, you may want to use low level, my reason is because high level VIs will actually be a function call calling other functions, which introduces a minimum delay, instead, if you use low level you are directly calling the functions for acquisition so there is kind of a small time saving if you think of it as acquisition wise.
Also, the high level VIs if you check their block diagram it has more structures for error checking, session ID checking, etc., so with low level you have direct control over the acquisitio
n from your main program without introducing innecessary structures or functions.
Regards,
Nestor Sanchez
IMAQ/Motion Support
National Instruments
Nestor
National Instruments

Low level events please URGENT

hello
please i have some problem with low level events.please anybody have some solution so please tell me
basically any language such as c/c++ events are captured by operating system and then focusing on the particular component such as window or textbox etc.
is there any bypass mechanism in java that we get the lovel level events from any operating system and all to do something.
please Urgently reply me so that i can try for it, i have some work to do with this stuff.
thanx in advance
[email protected]

You can already get mouse clicks, mouse motions, key presses... what other "low-level" events are you interested in?

Low-level code MRP

Dear gurus,
i find in the material master (MM02 and in the table MARA) the parameter "Low-level code" = 000 , how use this parameter ?
When this value is write? At saving of Bom? Is a setup of customizing for value possible?
Thanks a lot
Daniele Pistilli
PP TEAM

Hi
Pl go thru the following may be useful
The lowest level that a material appears in any product structure of the
company. The low-level code controls the sequence in which the material
is planned in an MRP run: First the materials with low-level code 0 are
planned, then the materials with low-level code 1, and so on. The lower
the low-level code, the higher the number that is assigned to the
material.
The level that is set in the material master record represents the level
at which the material will be planned. This means that the material will
only be planned once all assemblies in which it occurs have been planned
and exploded.
The low-level code is set internally in the material master record when
the BOM is maintained.
When you create a bom item for a assemblyparts ,the item's low-level code will equal (assemblyparts's low-level code + 1),but if (assemblyparts's low-level code + 1) < bom item then the bom item's low-level code not changed
Ram

Command Line Compilation of a Project with different packages

Hi,
I am trying to compile a project through command line, which has different packages with many classes in it. Now If I try to compile package by package It's complaining about other referenced classes of different packages. So I created .bat file, which includes all the packages, but it's complaining input line is too long.
D:\jdk1.3.1\bin>app.bat
My bat file is
javac -d d:\Application\build d:\Application\source\com\ibc\rules\login\*.java d:\Application\source\com\ibc\rules\lookup\*.java .................d:\Application\source\com\ibc\wid\events\*.java d:\Application\source\com\ibc\wid\frames\cust\*.java ...
and so on............
Is there any solution for this problem?
Thanks in advance....

I think the prefered and more elegant way to compile project including packages should be writing makefiles including their compilation, installation, deploying - rules ..
Make is really powerful, the maybe only weak-point is that there are some distribution of them, gnu-make, microsoft nmake .. which are slightly different, that made porting among platforms difficult.
The jakarta-ant was a new approach to this which uses xml parser to proof the dependencies, etc ..
Because I'm not familiar yet with xml & ant and as a in-blooded unix user, "make" is still my prefered way to do roject.
The easiest way to get unix environment required for using make in Windows platforms is to download the "unxutils". It includes make, bzip2, diff, ... and other unix-tools. Refer to this (found from search by google) :
http://www.weihenstephan.de/~syring/win32/
http://www.weihenstephan.de/~syring/win32/UnxUtils.zip
http://sourceforge.net/projects/unxutils/
For more documentation on how to write makefile, use make -tool, see
http://www.gnu.org/manual/
http://www.gnu.org/manual/make-3.79.1/html_mono/make.html

Nodes with Only One Lower-Level Node = Hide

Hi everyone
Have anyone present this situation:
Iu2019ve a quey to report inventory aging. It has two hierarchies to show data. In Rows I have Major Markets and in Columns a date hierarchy to show aging Ex: from 0 to 8 months, 9+ and 13+. Of course here I have also value and volume.
Query reports all values for all major markets fine. When I filter one major market, letu2019s say France also brings detailed figures but when I add any drill down in rows all values goes to cero (0).
Te estrange is that if you swap drill down order with major markets or drill down by columns with the same characteristic figures come out again as usual.
I know this sounds like a SAP note but I have not been able to find it either.
Thanks a lot for your help, and of course points will be assignedu2026..
Ps. Important, this happen when option u201CNodes with Only One Lower-Level Node = Hideu201D (this is selected on purpose because there are some repeated nodes in major market hierarchy Ex. France u2013 France and if there is just one value under first node then means that only display of last one is necessary to avoid repeated values).

Solution we found is to remove flag "Do not display leaves for inner-nodes in the query", directly on the hierarchy.
Thanks

Recording line-level input with Griffin iMic

I'm having trouble recording line-level input from a stereo system with a Griffin iMic. Even though all extraneous inputs have been deactivated, I'm still getting a slight feedback hum. There should be no extraneous noise whatsoever. I haven't done this in quite a while, so I've forgotten what I must do. Any help is apprreciated. Thanks very much. Peace,
iBook G3, 1.42 Mac mini G4 DVD±RW Mac OS X (10.3.9) 640Mb SDRAM, 1gb DDRAM

I'm trying to digitize an audio cassette with
Soundtrack Pro. My setup includes a Griffin iMic
that goes to a USB port. The trouble I'm having is
in controlling the input volume. The level meters
indicate clipping, but I'm not clear how to set the
input level.
If it's in the Recording tab (>Input) with the Gain
slider, mine is greyed out.
M Wohlgy,
(I know this is months after your post.)
Control of the iMic volume is in the Preferences pane called "Sound". You can set the output and the input levels there.
Remember the iMic's position switch works only for the imput, either close to the microphone icon for "microphone" or away from it for "line in".
I use the iMic exclusively.
David

Compiling CVI project with low-level input/outp​ut function under VC++

Similar Messages

Maybe you are looking for

Compiling CVI project with low-level input/output function under VC++