Need to post a reply to a thread but I'm forced to ask a question?

It is embarrassing that I have to work around a registration bug by asking a question when all I need to do is establish and account to reply.

Well, I've registered to a lot of forums and I've never seen a process quite this convoluted. I looked for a way to delete my bogus OP before anyone noticed...
That register link that loops back to the authentication screen is a significant hurdle to overcome for sure. So, to answer your question, I think it would be good to be able to register now without that tricky loop.
Bottom line was that I found a poster's resolution to a problem (with Firefox 27 being incredibly slow) to have worked brilliantly and believed the Community needed to know.

Similar Messages

Impossible to post a reply to this post!!!!!!!

Been trying to post a reply to this thread but it just won't accept it. God knows what is wrong with that thread. It is nearly 12 hours or more I have been trying it.
<how to buy photoshop elements in india>
It could be that because my message contains telephone numbers and all that.

It could be that because my message contains telephone numbers and all that.
Yes, the International dial code for India (ninety-one) is blocked; see https://forums.adobe.com/thread/1694565

"Sorry, this content is not allowed" Error when trying to post a reply.

Has anyone else seen this error lately when trying to post a reply?
Just to be sure.. I remove all the formatting and just used simple text.. Still the error persists.
It works for some other posts in the same forum too.!
Eg.. I am unable to post a reply to this thread
List the files in a folder
But was able to do so for
control file question
Let me know if any of you have seen this and have a workaround/solution :)
Thanks,
Rajesh.

Rajesh Chamarthi wrote:
I dont think it is an issue with specific words trying to be spam filtered....No content I tried to post i the reply went through.
As I put in the earlier post,just the words "test" didn't work either.
Another post i made had the same words and it went through fine..Hahahaha </sarcasm> ... I was wondering if the issue was to do with the subject, and was jokingly thinking that if the poster had a norty word (eg. l i s t) in the subject, that maybe they'd be allowed to post, but replies wouldn't be able to.
Imagine my surprise when I opened the post you had problems with and found it has... l i s t in the subject. Head, meet desk.
Fail?! *{;-)

Can't see who has replied to the thread in the forum, its pointess?

What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
Surely before you release such garbage you test for these very simple issues, right?
osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.

It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
Latest reply: May 3, 2014 2:17 AM by . osgood_
The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
9 minutes ago in Dreamweaver support forum
Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
Plenty of teething issue you need to get your head around over the next few weeks.

Woogly - I need U Urgent - please reply if U R there !

Woogly - I need U Urgent - please reply if U R there !

Thanks.
Its already posted:
http://forum.java.sun.com/thread.jsp?forum=54&thread=480050
Woogly had gave me last time very useful help getting a container over a container.
Now I'm dealing with converting the same stuff to Applet, but of course..
I'll be glad and thankful for help also from others.
Thanks agian.

Cannot post a reply

For whatever reason, although I am logged-in to Adobe Forums, I cannot post a reply to a message that was posted in reply to my original message (which began the discussion). A blank white space, barely discernible, is displayed below the two lines with their respective radion buttons for "Yes my question was answered." and "No, my question was not answered." The choice is "No", but I did not ask any question(s) to begin with.
Instead, I posted three screenshots which showed problems that I encountered while attempting to download and install the most recent update to Adobe Reader for Firefox. Someone posted a reply that the same problem occurs with Opera. I wanted to tell him that Firefox, Safari and Opera all use the same add-on for Adobe Reader.
But there was no way that I could discover to enter any text into the field for it. Javascript was enabled, or I would not have been able to use the Reply feature to access the screen on which the message was to be composed. The field never contained a cursor, regardless of my attempts to cause one to appear, whether with the mouse or with the keyboard. Please understand that I do NOT have any desire whatsoever to go to Jive Software, open an "account" with them, and attempt to engage in some problem-solving for their software. I am not a beta-tester!!   My name and other data about me is in far too many databases as it is. If you can't hire people whose product works, then DIY.
In fact, Adobe's use of subcontractors has become very alienating. When I attempted to update Adobe Reader on the evening of July 29, the process was a travesty. First, it was not clear whether the update in which the security vulnerablilities have been corrected was available, let alone installed. This is partly because your website maintainer(s) are too ignorant, or too lazy, to post the entire version number of the current Adobe Reader release. They just post "version 9.1" and omit anything after it. So they don't have to update the page until either of the two digits change. But it is the digits that follow "9.1." which disclose whether the version that I'm about to download (http://www.adobe.com/downloads) is the one that is already installed, or a version that is subsequent. Perhaps you are afraid that disclosing technical data that is actually useful will intimidate and alienate the artists and writers who are the primary users of your products (you're lucky that they aren't all running the Apple MacIntosh instead). But I doubt that will happen. It is the failure to disclose such data that will eventually alienate EVERYONE.
For what it is worth to you, I have posted the message text below at the following link:
http://techrepublic.com.com/5208-12846-0.html?forumID=102&threadID=314113&messageID=313100 9&alertspromo=100901&tag=nl.rCOMBINED
What makes a difference is
http://www.get.adobe.com instead of http://www.adobe.com/downloads.
{Update 2009-08-01: when I tried the first link with Firefox 3.5.1 today, Embarq, my ISP, displayed what used to be an HTTP 404 (?) error message but now is an Embarq website page that leaves you wondering why you are looking at it instead of what you wanted. I don't know what has happened to the first URL, but that was what Securnia PSI used during its downloads of the updates, as described below.}
I have used the second one for years, but now it has nothing but problems. Thanks for the link to the IE 8 download. What I did this evening was to first run Windows Update (with IE 7).
The MS update site offered: (A) upgrade to I.E. 8, (B) cumulative security update for I.E. 7 KB972260, and (C) Silverlight update to ver. 3.0.40723.0 KB970363. The one for Silverlight surprised me; it wasn't there on Tuesday 14 July. After all of them were installed, I ran I.E. 8 just to go through its initial configuration routine, so that it should not interfere with subsequently updating any add-ons.
Then I ran Secunia PSI and had it do a new scan. It reported updates: (A) for Adobe Air; (B) Adobe Flash Player (ActiveX) to 10.0.32.18; (C) Adobe Flash Player (General Plug-In) to 10.0.32.18; and (D) Shockwave Player 11.5.1.601. I used the Secunia "Download Solution" feature for each one; it obtained the respective updates from http://www.get.adobe.com. Secunia continued reporting the Flash Player version as 10.2.22.87 until I deleted Flash10b.ocx from the C:\Windows\system32\Macromed\Flash directory; the current one is Flash10c.ocx.
Curiously, Secunia did not report Adobe Reader as insecure or outdated, on my computer. AcroRd32.exe Properties > Version showed Version: 9.1.0.163 but also displayed File Version and Product Version as 9.1.0.2009022700. Control Panel > Add or Remove Programs reported the Adobe Reader version as 9.1.2. Go figure.
However, updating Adobe Reader via http://www.adobe.com/downloads on July 29 required installing two Firefox add-ons: an extension for the Adobe Download Manager, and a plug-in "getPlus+ for Adobe 16236" (if my memory is correct). Of course, there were a couple of .exe files under the radar in C:\Program Files\NOS and some more in C:\Documents and Settings\...\Application Data\NOS. After all of that, I subsequently learned, from looking at the Secunia report for I.E. Secure Browsing, that "NOS Microsystems getPlus ActiveX Control 1.x" is "insecure, no solution".
Already I wasn't happy about having one of the NOS executables installed as a service, as though that is what the memory must contain after every system boot. And I didn't like Yet Another Firefox Extension just for the convenience of one particular software developer and/or their distributor. Firefox already loads slower than I like and adding YAFFX like that makes it even slower to load.
So I uninstalled Adobe Reader and all of its Additional Ware from NOS; I found files from both all over the HDD. I think that I deleted everything that I don't want or need although the I.E. NOS ActiveX control remains. I have never downloaded a .PDF, or looked at one, with I.E. and I don't plan to, so maybe I should just get rid of that one, too, if I can.
For the time being, at least, I'll be looking at .PDF files with Foxit. Of course, Adobe Flash Player and Shockwave Player remain installed, with Adobe AIR and Adobe Download Manager.
Posted: 07/31/2009 @ 09:32 PM (PDT)                  (edited 08/01/2009 @ 06:18 PM (PDT))
As of this writing, I do not have any Adobe or NOS add-ons (extension or plug-in) installed in Firefox, and I am planning to remove the insecure ActiveX Control that has been installed for Internet Explorer 8.
Continue to follow your current strategy, and you won't have the burdens of maintaining either Adobe Flash Player or Shockwave Player as well. I had Adobe Media Player installed, but I removed it since I've never found a reason to run it.

Hi, Kath H.,
I hope that you heeded the warnings. Adobe has, however, released updates in which the security flaws have been corrected. From my reading of posts on some (non-Adobe) forums, what everyone has a problem finding is where to download the updates and/or to install them directly online.
The customary location is: http://www.adobe.com/downloads.
You will find three "buttons" labeled "Get Adobe Reader", "Get Adobe AIR", "Get Adobe Flash Player" and one hyperlink for "Get Shockwave Player". You need to update the ones that are installed on your computer (usually, at least Flash Player and Shockwave Player). The website button will automatically present you with the version that is appropriate for the browser that you are running at the time that you access the download.
BTW, please be aware that what I found at the customary Adobe downloads website on July 31 for Adobe Reader and Firefox was a travesty. I don't know whether Adobe has taken corrective measures since, but their "instructions for Firefox users" were outdated and simply wrong. I had already updated Adobe Reader on July 29, but I was not sure that I had actually obtained the update, since some people were reporting that they had to do it twice before it was installed correctly.
Something that may interest you is Secunia Personal Software Inspector (PSI). It inventories all of the software on your computer, and compares (via the Internet) each version that it finds to the Secunia database to check whether it is up-to-date, or it might be known to contain security flaws. An individual user can download, install and use Secunia PSI without charge (commercial use requires a license). You can obtain it from:
http://secunia.com/vulnerability_scanning/personal/
One feature is that, after Secunia PSI runs a "scan" of your software, it displays any "insecure" programs on a tab labeled "Insecure". Each entry has a [+] box which is expandable into an explanation, and a toolbar at the bottom with several actions that you can take, the first being "Download Solution" (when the software developer or publisher has a software update available). That is what I used to update the "insecure" Adobe Flash Player and Shockwave Player add-ons for Firefox (and for I.E., also, which I have installed but don't run often). Secunia PSI downloaded them from https://www.get.adobe.com but I haven't been able to connect there with the browser.
Since Secunia PSI did not report Adobe Reader as insecure, I have supposed that it was updated. (You can scan my first post here to find out why I uninstalled it and installed Foxit instead!)
   --- OldReader

Need to POST data from a desktop client to a server.

Hello all, it's been awhile since I've posted here, so I hope everyone has been doing well.
I have cross posted this here java - Need to POST data from a client application to my server - Stack Overflow but no answers, and since SO has been extremely slow for the questions I've been asking I am posting here.
Here is the post:
I know the title is probably a common question, but I am a bit confused on everything I'm trying to do, so I am trying to piece it together, and figured a common title would be better than a confusing one.
I am basically developing a web application and one part of that is a file uploader. I am using Apache Commons File Upload via the Streaming API, and that all works fine, except I need to access the file I'm uploading, because that contains data to additional files to upload. I.e., Read File A, get paths to images, upload images with File A to server and save on server. The API can be found here http://commons.apache.org/proper/commons-fileupload/streaming.html
I was told there is a security risk via the web and would be impossible via a browser, since the user needs to select all files to upload, i cannot tell the browser to upload additional files, so I am left with a client side option.
I am confused if there is a special library I need, or as I have been seeing threads that talk about using the built in UrlConnection Class or http://hc.apache.org/
I basically need to be able to read the file, which technically gives me a path to a Database on the user's system which I then read to get the additional images. After I get all of that I then need to post the data as a multipart form as that is what the FileUpload requires.
form method="POST" enctype="multipart/form-data" action="fup.cgi">
File to upload: <input type="file" name="upfile"><br/>
Notes about the file: <input type="text" name="note"><br/>
<br/>
<input type="submit" value="Press"> to upload the file!
</form>
This is the example found in the Overview section of the Fileupload which can be accessed from the link above.
There wouldn't be an issue if the users uploaded all of the data themselves, but since I have to do some of it automatically it causes some "concerns/issues."
Basically these files are created and packaged from another application, so the images, and the db will always be in the same place, and that file that they are uploading is a file the other program creates, so everything will always be known, I just need to upload it, and then POST it as enctype="multipart/form-data" So that my servlet can read it and save it on my server.
So I would appreciate it if anyone had any suggestions on where to begin my journey with this. I have heard of a few applications like curl and wget that are used for this, but those seem to be more C based. As mentioned earlier it seeems the httpcomponets from apache might work well, but I want to make sure.
I appreciate all the help, thank you for your time all.

It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
[http://java.sun.com/docs/books/tutorial/essential/io/]
*Unless you write a bunch of JNI code to replicate what the java.io classes are doing.

In which Board we need to post cRIO related Questions?

sir,
In which board do i need to post cRIO related Questions and doubts regarding my application with cRIO .Please help me previously i have posted in motion control drives as my application is related to motor control using cRIO.bu i am not getting any reply .i couldnt find any cRIO related board in select board option.
Solved!
Go to Solution.

Hi illa,
You can post your query under the Real Time Measurement and Control
http://forums.ni.com/t5/Real-Time-Measurement-and/bd-p/280

HT3702 apps store said that the game is free but why the bill says it need money? please reply me!!!!!

apps store said that the game is free but why the bill says it needs money?
please reply me soon!!!!
chan family
<Email Edited By Host>

Did you add or change your credit card details when downloading the app ? If so then you've probably received a temporary store holding charge, which should disappear within a few days : holding charges. Or have you made any in-app purchases within the app (what app is it) ? If you log into your account on your computer's iTunes (Store > View My Account), what shows under your purchase history ?
As these are user-to-user forums, you are not talking to Apple here, I've asked the hosts to remove your email address from the post's title.

Getting HTTP 501 / HTTP 505 error when replying to a thread

Hi,
When replying to a thread I get the following error:
HTTP 501 Nicht implementiert oder HTTP 505 Version nicht unterstützt (HTTP 501 not implemented or HTTP 505 version not supported).
What does it mean? Is there a problem with the forum?
Regards,
Ulrich

Hi,
The text I want to post contains a HTML/Javascript code example. I think that causes the problem. If I post without the code example it works.
URL of the concerned thread is Integrate WAD 7.0 Template into BPS Web Interface
Can it be a general issue with the forums software?
Is there a way to contact a forum admin to report this issue?
Regards,
Ulrich

I just spent an hour composing a reply in a thread ("Firefox will not work with paypal"), only to see "You don't have permission" at Submit - total loss!

I was logged in to reply in the thread "Firefox will not work with paypal". I spent the better part of an hour carefully composing that reply, testing cases, providing links, etc... [Hint: Firefox, unlike other browsers, has a problem with scripts from server paypalobjects.com.] Because I had taken so long to compose the reply, it seemed like a good idea to check it via the Preview button, but I got a message that that function was not available. Of course I decided to submit it anyway, but when I hit "Submit" I got a message "You don't have permission ..." - at which point I was (stupidly) on a different page with that message, and everything I had composed was gone!

It might be too late for this, but it's what I use when this happens. Prepare for deep nerdom:
* Open the web console below the error page by pressing Ctrl+Shift+k
* Right-click the blank area and turn on logging of the request and response bodies
* Resubmit the request by clicking the reload button
* Click the new URL that appears to open the viewer showing the headers and bodies
There you may be able to copy out the content of your post from the Request Body. You can use a word processor or text editor to find/replace the + characters back to spaces.

Not able to see the Person who posts reply and asked the question.

Hi,
I am facing issue with Posts in MSDN forum. I am not getting the name of Person who replied and asked the question which earlier used to come below the Post.
Are all facing the same issue? I am using IE 8 and Google Chrome 33.0.1750.117 m.
Can anyone please help.
One good question is equivalent to ten best answers.

I am using Google Chrome Version 33.0.1750.146 m (updated today). I am seeing names fine.
It may be also your connection speed and some extra add-on you have.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles
My Google Chrome is also updated to 33.0.1750.146 m, and I am using high speed internet connection in my organization, but still I am not able to
see poster details. Even there is no data coming below
"Asked by:" section at Top left corner of MSDN Forum.
One good question is equivalent to ten best answers.

Blank page after posting a reply?

I'm getting a blank page after I post a reply. I have to go back to my bookmark for the whole forum manually. Is this a feature or a bug? (Im using Safari)

Bold, Italics, Underscore, Teletype, Color, etc...
Patrick

Need to post Full Load data (55,000 records) to the target system.

Hi All,
We are getting the data from SAP HR system and we need to post this data to the partner system. So we configured Proxy(SAP) to File(Partner) scenario. We need to append the data of each message to the target file. Scince this is a very critical interface, we have used the dedicated queues. The scenario is working fine in D. When the interface transported to Q, they tested this interface with full load i.e with 55,000 messages.All messages are processed successfully in Integration Engine and to process in Adapter engine, it took nearly 37 hrs. We need to post all 55,000 records with in 2 hrs.
The design of this interface is simple. We have used direct mapping and the size of each message is 1 KB. But need to append all messages to one file at the target side.We are using Advantco sFTP as receiver adapter and proxy as a sender.
Could you please suggest a solution to process all 55,000 messages with in 2hrs.
Thanks,
Soumya.

Hi Soumya,
I understand your scenario as, HR data has be send to third party system once in a day. I guess, they are synchronizing employee (55,000) data in third party system with SAP HR data, daily.
I would design this scenario as follows:-
I will ask ABAPer to write a ABAP program, which run at 12:00, pickup 55,000 records from SAP HR tables and place them in one file. That file will be placed in SAP HR file system (you can see it using al11). At 12:30, PI File channel will pick up the file and transfer the file to third party target system as it is, without any transformation. File to File, pass through scenario (no ESR objects). Now, ask the target system to take the file, run their program (they should have some SQL routines). That SQL program will insert these records into target system tables.
If 55,000 records make huge file at SAP HR system, ask ABAPer to split it into parts. PI will pick them in sequence based on file name.
In this approach, I would ask both SAP HR (sender) and third party (target) system people to be flexible. Otherwise, I would say, it is not technically possible with current PI resources. In my opinion, PI system is middleware, not system in which huge computations can be done. If messages are coming from different systems, then collection in middleware makes sense. In your case, collecting large number of messages from single system, at high frequency is not advisable.
If third party target system people are not flexible, then go for File to JDBC scenario. Ask SAP HR ABAPer to split input file into more number of files (10-15, you PI system should be able to handle). At receiver JDBC, use native SQL. You need java mapping to construct, SQL statements in PI. Donu2019t convert flat file to JDBC XML structure, in your case PI cannot handle huge XML payload.
You have to note, hardware upgrade is very difficult (you need lot of approvals depending your client process) and very costly. In my experience hardware upgrade will take 2-3 months.
Regards,
Raghu_Vamsee

Need to Post Components in Production Order in MB1A through BAPI as Planned Good Issue

Hi ,
I have created a Program to upload data s for MB1A through BDC , it works fine, but for huge data s it takes more time. alternatively created one more Program which updates through BAPI Function Module "BAPI_GOODSMVT_CREATE". It works fine , but one issue noted, after posting through Function Module , components are posted as Unplanned Goods Issue.   I need to post the components as " Planned Goods Issue" instead of "Unplanned Goods Issue " . This can viewed through Tcode : C003
Below are the inputs passed for BAPI Function Moduel
**&------Header Contents of bapi Upload-------------------&*
header-pstng_date = sy-datum.                                              " Posting date
header-doc_date    = sy-datum.                                             " Document Date
header-header_txt = '000001002280'.                                     " Header text
header-pr_uname   = sy-uname.                                            " User Name
header-ref_doc_no = '000001002280'.                                    " Header Ref. Doc. No.
CONCATENATE sy-uname sy-uzeit c_method INTO header-ref_doc_no_long SEPARATED BY '-'. " Refer Text
*Item Data
wa_item-material   = '000000000010000800'.                             "Material
wa_item-plant      = '3910'.                                              "Plant
wa_item-stge_loc   = 'WIP'.                                            "Storage Location
wa_item-move_type = '261'.                                            "Movement Type
wa_item-entry_qnt = '1'.                                                  "Quantity
wa_item-entry_uom = 'PC'.                                              "Unit
*wa_item-res_item = 1.                                                  "Reservation Item
*wa_item-reserv_no =                                                      " Reservation Number
wa_item-batch      = '0000011027'.                                    "Batch No
*wa_item-mvt_ind   = 'F'.                                                  "Movement Indicator
*wa_item-stck_type = 'F'.                                                 "Stock Type
wa_item-orderid    = '000001002260'.                                 "Order ID
wa_item-prod_date = SY-DATUM.
*wa_item-GL_Account = '610000'.                                     "GL Account
*TRANSLATE wa_item-batch TO UPPER CASE.
*APPEND wa_item TO it_item.
c_code = '03'.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header       = header
goodsmvt_code         = c_code
TABLES
goodsmvt_item         = it_item
goodsmvt_serialnumber = it_sno
return                = return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
      wait = 'X'.
    commit work and wait.
Even i tried to pass "Movement Indicator , GL Account etc" , Still not able to fix the issue. Can anyone suggest how to post the Production Order components as "Planned Goods Issue". I am not sure any other values to be password.
BR,
Murali

I have made something like your :
* Alimtentation de la BAPI de mouvement de stock MM.
move : sy-datum        to ls_header-pstng_date ,
        sy-datum        to ls_header-doc_date ,
* Indique le code mouvement
        '03'            to lw_code.      " 03 normalement, mais je veux que ca plante
loop at lt_ltap
      into ls_ltap.
   move : ls_ltap-matnr   to ls_item-material ,
          ls_ltap-werks   to ls_item-plant ,
          ls_ltap-lgort   to ls_item-stge_loc ,
          '261'           to ls_item-move_type ,
          ls_ltap-vsolm   to ls_item-entry_qnt ,
          ls_ltap-meins   to ls_item-entry_uom ,
          i_ltak_vb-benum to ls_item-orderid ,
          i_ltak_vb-rsnum to ls_item-reserv_no ,
          ls_ltap-rspos   to ls_item-res_item ,
          ls_ltap-rsart   to ls_item-res_type.
   append ls_item to lt_item.
   clear ls_item.
endloop.
I have to put the reservation number to have it works.
Fred

Need to post a reply to a thread but I'm forced to ask a question?

Similar Messages

Maybe you are looking for