Need to print mailer info always on even numbered page

Post Author: LaurenP
CA Forum: General
Good morning,I'm currently using Crystal Reports 8.5 (I thought I was on 9.0) and am trying to get a report to always print the mailing information on an even numbered page.Here is the deal. The report for the most part will be 2 pages, the first containing the details and some summary information and the second containing the mailing information. The customer that is using the report prints it out on special paper, so that the mailing information needs to print on even numbered pages.The report is set up with several groups, one being on the person's address, which is where I have put the mailing information. I also added the mailing information to one of the details sections (one that is before where the actual details print) and is suppressed using the following formula: PageNumber Mod 2 <> 0. I have also added a formula to the New Page After: PageNumber Mod 2 = 0. This seems to always work when the report goes to page 2 while printing out the details. My problem now, which would be the case most of the time when this situation occurs, is when the report goes to page 2 while printing any of the 3 group footers that have summary information in them. I tried using the same logic as with the details and it is hit and miss on whether or not it will work. I have added the mailer information in a footer section above the footer and added the same suppression and new page after logic and sometimes it will work and sometimes it won't. When it doesn't work, the mailer does not print and the group footer prints on page 2.Does any one have any ideas?Thanks in advance,Lauren ETA: I have tried to debug it and this is what I found. When I take off the suppression formula so that the mailer always prints and add a pagenumber field to the group footer it displays 2.

Post Author: V361
CA Forum: General
You could try adding
WhilePrintingRecords;
in front of the PageNumber Mod 2 .... Statements
This may not work in 8.5, but it is worth a shot.
If that doesn't work, you may need to consider a subreport.

Similar Messages

Printing only odd/even numbered pages does not work

I've got following problem: Printing only odd/even numbered pages does not work. Not in Preview, nor Adobe Reader. I Don't know why. i'm using a hp Color LaserJet 2550L. I just worked fine, but I cannot remember the time this failing first occured. I really hope the problem will be solved quick and easy.
Thanks so far
Bastian.

Mine does not work either. I have trashed prefs, rewrote permissions, ran Disk Utility from a separate HD, etc. and I cannot get this feature to work.
I got 45 odd pages to print last night and now it won't print odd or even pages. I am reduced to printing every backside page one at a time. If I would have known about this problem before I could have saved myself an hour and just printed them all on single sided sheets. I tried to save paper and now I'm screwed (timewise)......
Any other suggestions would be greatly appreciated.
Thank You,
Dave Buckley

Flipped even-numbered pages when printing double-sided from Preview

My HP 2015dn printer has the ability to print double-sided. Yet I'm finding that when printing from Preview, the even-numbered pages are flipped 180 degrees. I can see the rationale for this, but I'd like to disable it and have the orientation the same for both odd- and even-numbered pages. There is a setting in the print dialog to "automatically rotate each page," but that is not what I want.
Any ideas?

That fixed it. The pdfs were rotated so that they would appear in landscape orientation on my screen (they're originally photocopies of side-by-side book pages). Well, now I understand the difference between short-edge and long-edge binding! Thanks for your help.

Can't print even or odd numbered pages

No matter I choose "even numbered page" or "odd numbered page" in the printer setting,
it just print out all pages without differences.
I tried two different printer, hp Laserjet 1300 & Epson stylus C68, and got the same result.
However, printing even/odd numbered pages works fine in Tiger.
Does anybody have the same problem?

sonic64 wrote:
My friend told me that his Lexmark printer works fine in printing even/odd numbered pages on Leopard.
However, his printer is directly connected to Airport Express.
It seems that Gutenprint drivers may not be fully compatible with Leopard.
That anecdotal experience is good, but it does not further trying to find an answer for your situation. I have had no problems with printing odd or even pages using the Gutenprint drivers with my HP DeskJet 870. That is why I asked if you could connect one of the printers directly to your Mac running Leopard and see if the Gutenprint drivers behave correctly. The goal is to find out whether it is the Gutenprint drivers, something about printing to a shared Windows printer, or something else that is causing this behavior.
You might also want to try the hpijs drivers for the LaserJet 1300 to see if they are able to print odd or even pages. That also would be of help in determining where the problem is. http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs
Matt

MY HP Photosmart C 4680 prints wrong numbered pages

I have a new Mac using OS X 10.6.2 and an HP Photosmart C 4680 printer. My problem is that, after selecting the numbers of the pages to be printed the result is that other numbered pages are printed. For example, I select pages Nos. 22 and 23, instead 20 and 21 are printed. The Hp techs advised me that the problem lies with Adobe Reader. Would appreciate help. Please keep it simple s I am computer illiterate.

Hi
Try following the troubleshooting steps in the document below.....
Doc c02065582
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HT4946 I need to print & back-up a series of abusive/threatening SMS (on iphone 5c) for my solicitor. Is there a way to do this which will show the time, date & sender info? How can I preserve (full) SMS data as evidence for future court proceedings?

Does anyone know how to access sms text messages from iphone 5c backup from icloud or itunes? Apparently SMS can be restored so data I need must be stored in backup. I need to print a series of abusive/threatening SMS messages received on my iphone 5c from one sender. I need the time, date & whatever data is stored about source/sender of messages, as well as content. How can I access this data to create a chronological record of the abusive SMS messages and can I preserve the iphone's message log specifically-- so I can access records of these texts without having to restore a back-up? I need to do this to provide evidence for my solicitor and preserve that evidence for future court proceedings, thank you.

http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CMr1..
http://www.ecamm.com/mac/phoneview/

Can Pages Print Mailing Labels?

I have a number of clients that currently use mail merge on their PC's in Office 2003 to print mailing labels. Their biggest issue has been getting this to work painless, as theres always some sort of file compatibility issue or what they see on the screen is not what they get in print form.
Can Pages do a 'mail merge' or similar to print mailing labels easily? Is there any way to print mailing labels from an address book stored on the Mac? If so do you need to manually enter label sizes or is there a list of compatible brand labels (such as Avery) like Word has?
A few of my clients would consider switching over to a Mac if daily tasks like this were more painless then using Office on a PC. You would think after all these years someone would be able to make this simpler.
PowerMac G3 Mac OS X (10.4.8)

Welcome to Apple Discussions
Pages 2 can do mail merge using data in Address Book, but it appears to be intended to use in form letters & envelopes & prints one record per page not for printing a page of labels.
But, there is no need to use Pages for the labels. Address Book in Tiger will print labels directly. There are several printing options in the Print dialog - labels, envelopes, lists or pocket address book.

Printer Setup Utility always crashes- and am getting weird printer behavior

Just installed 10.5 on a fresh internal drive- machine is G5 2X2- settings imported from a 10.4 installation on another drive. Printer is a Brother HL-5170DN
If I try to print from any app, the app doesn't crash, as has been reported by others, but the printer behavior is strange. I added the printer from the Print and Fax control pane, which saw the printer and appeared to be happy. But when I try to print any test document, the printer starts printing an error message on every sheet in its tray, literally running through the whole stack and then complaining it's out of paper, even though the document to be printed was only one page. Have never seen anything like that. The error message printed on paper is: ERROR NAME; undefined COMMAND; y OPERAND STACK;
Cannot launch Printer Setup Utility- always crashes. Have tried reseting printer system and rebooting, but no luck. It seems to be complaining that a file called "_CPLPPDGetFileInfo" is missing. The error log when I try to launch Printer Setup Utility is:
Process: Printer Setup Utility [550]
Path: /Volumes/fatherhood/Applications/Utilities/Printer Setup Utility.app/Contents/MacOS/Printer Setup Utility
Identifier: com.apple.print.PrintCenter
Version: 4.7 (161.10)
Build Info: PrintCenter-1611000~1
Code Type: PPC (Native)
Parent Process: launchd [85]
Date/Time: 2007-11-03 10:53:29.649 -0700
OS Version: Mac OS X 10.5 (9A581)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0
Dyld Error Message:
Symbol not found: _CPLPPDGetFileInfo
Referenced from: /Volumes/fatherhood/Applications/Utilities/Printer Setup Utility.app/Contents/MacOS/Printer Setup Utility
Expected in: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services

Thanks for the helpful info. I had upgraded to Leopard using Archive & Install and had an alias to the Printer Setup Utility from Tiger, which I kept trying to use not realizing that this now pointed to the old version in the Previous Systems folder.
Now I've deleted the whole thing and will remember to use the System Preference panel to configure my printers.

Mail & Safari crash repeatedly even after erase 10.6.7

I came back to the Mac to get away from Windows issues but still need to run Windows. So running Windows 7 64 bit in bootcamp & using that as a Virtual Machine in Parallels 5. Bought the macBookPro 13 in April 2010. Was running fine until Feb 19, 2011. On that day, Pages crashed, going from Pages to desktop to blue screen. Over a week it & Safari got worse with repeated crashes so that it got so I wasn't even able to boot.
AppleCare & Genius bar have tried various solutions leading up to & including 2 erases--the 2nd time not even restoring much at all.
Did not even have mail set up until after the erases. All I have on the Mac side since the erases is iLife & iWork & then later reinstalled Parallels. But the crashes happened before installing Parallels. Safari & Pages crashed before erases. Since it has been Safari, mail & finder & possibly Pages & Numbers-can't remember.
Even after the erase these have continued intermittently. Have been working in Bootcamp lately since I have Outlook there & did taxes in Turbotax Windows. It has been pretty stable.
The mac has also had trouble booting & had finder crashes so it seems to be mostly the various mac apps, but not just 1 of them. Right now Safari seems to be working ok & hopefully will let me post this. But other times it crashes & then it may work fine for several hours.
Anything known that happened around Feb 19 that could lead to this?
When did 10.6.7 come out? There were some reports on the Parallels forums of possible conflicts between that & Parallels, although I think that was parallels 6 & I'm running Parallels 5.
Most of the crash reports seem to say BAD_ACCESS_SIGEV (or something like that)
& the thread is 0. This seems to be true whether Safari or Mail. Can't remember if Pages or Numbers have crashed but I haven't used them much.
I'm told Macs don't get viruses or malware, but then someone said maybe they do.
So far no reason has been found for this but the next step Genius bar is going to do is replace logic board, memory & HD. But hardware tests hadn't shown anything.
So just wondering if there might be any other possible explanations that maybe should be explored. Genius bar is taking good care of me, but this is really disrupting use of Mac & really blindsided me since my memories of Macs (& what my brother confirmed has been true with their macs) is they just work.
So before I take it in for what is hoped will fix it, but really apparently that is not known, wondering if there might be something else to look at.
Also wondering if anything on Windows side could affect the mac? I have proprietary co software in bootcamp as well as Outlook 2007 that I sync to winmob phone for biz.
But the crashes started up again after the erase before installing parallels. Bootcamp has mostly been stable although I did have 2 windows blue screens shortly after the erase.
Again, any help or suggestions would be appreciated to help get this back to what I expect from a Mac. Its also embarrassing in an office of Windows users to be having all these problems on my Mac.
Message was edited by: KathiMR

There's a bit of Toshiba software that's likely not compatible with Mountain Lion:
1   com.toshiba.pde.e-studioeFiling          0x000000010fe010eb -[TTSNMP_eFiling initWithHost:andReturnError:] + 278
2   com.toshiba.pde.e-studioeFiling          0x000000010fe02860 -[TTPDEEFiling_eFiling initWithManager:] + 562
3   com.toshiba.pde.e-studioeFiling          0x000000010fdfe336 +[TTPDE_eFiling pdeWithManager:] + 44
4   com.toshiba.pde.e-studioeFiling          0x000000010fdfcfdc -[TTPDEFactory_eFiling PDEPanelsForType:withHostInfo:] + 373
I'm afraid there's no answer here other than asking Toshiba when they're going to update their software.

Why can't I print from Illustrator a non-faded print. It always prints as if I wanted a proof or something.

Why can't I print from Illustrator a non-faded print. It always prints as if I wanted a proof or something.

YOu have not provided any system info, version info or details about your printer. This is not going anywhere beyond stating the obvious - your system is not color managed.
Mylenium

I teach Continuing education classes to Real Estate agents and I need to issue them certificates at the class, whihc need to be signed by me and it needs to contain their info on the certificate. The certificate is currently saved in a word format.What i'

I teach Continuing education classes to Real Estate agents and I need to issue them certificates at the class, whihc need to be signed by me and it needs to contain their info on the certificate. The certificate is currently saved in a word format.What i'm trying to accomplish is to do a "mail merge " ( as some classes i have as many as 150 attendees) for the document, digitally sign each one with my signature on the certificate and then e-mail it out to the respective attendees. can this be done? if so How?

This is the step that I took after inputting my signature.
On the right, after saving my document, I click "Get Others to Sign." I was confused because it says that it's powered by EchoSign. Like I stated before, my clients are able to sign this document when I send it to them, but it is returned to me with their signature (not in the signature field, but at the end of the document), and my signature is missing. I tested this on myself - my signature is missing when they receive it.

Multiple PR-PO but need to print GR based on PR

Hi All,
We have multiple PR grouped into one PO and when we receive Goods Receipts (GR) for this PO, is there any way we can print the goods receipt note based on PR ?
I.e. Say 5 PR grouped into one PO and GR is posted and when we print the GR we need to print based on purchase requisition based, 5 print out.
We have the requirement were we don't want to post GR individually.
Appreciate if you can help me on this. Thanks.
Regards
Ashwin

Hi,
As and when we create PO with reference to PR.. I think you will be knowing the Item lines of the materials from which PR it is been taken.
Then when creating a GR with respect to PO please enter the PO number with the line item number and then only the materials in that PR will be picked up while creating the GR.
You can make a reference in one of the fields the PR number and then you can even customise in your forms for the print out of the PR number also
Then you can configure for WE03 which is collective GR list and then when you print you will get the materials with respect to the PR only.
Hope this is helpful,
Thanks & Regards,
Kiran V
Edited by: Kiran. V on Apr 18, 2008 3:48 PM
Edited by: Kiran. V on Apr 18, 2008 3:49 PM

I need to print logo in alv grid

I need to print logo in alv grid .As of now its getting displayed but it cannot be printed .Kindly tell me wether there is any option to print it .Eitjer using ALV or Object oriented ALV.Please reply soon

Hi Deepti,
Refer the code below.
report sy-repid.
type-pools : slis.
*ALV Formatting tables /structures
data: gt_fieldcat type slis_t_fieldcat_alv.
data: gt_events type slis_t_event.
data: gs_layout type slis_layout_alv.
data: gt_page   type slis_t_listheader.
data: gs_page type slis_listheader.
data: v_repid like sy-repid.
*ALV Formatting work area
data: w_fieldcat type slis_fieldcat_alv.
data: w_events type slis_alv_event.
data: gt_bsid type table of bsid with header line.
initialization.
perform build_events.
perform build_page_header.
start-of-selection.
*perform build_comment.     "top_of_page - in initialization at present
select * from bsid into table gt_bsid up to 10 rows.
*perform populate_for_fm using '1' '3' 'BUKRS' '8' 'GT_BSID' 'Whee'.
*USING = Row, Column, Field name, display length, table name, heading
*OR
perform build_fieldcat.
gs_layout-zebra = 'X'.
*top of page event does not work without I_callback_program
v_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program                = v_repid
      i_structure_name                  = 'BSID'
   i_background_id                   = 'ALV_BACKGROUND'
      i_grid_title                      = 'This is the grid title'
I_GRID_SETTINGS                   =
      is_layout                         = gs_layout
      it_fieldcat                       = gt_fieldcat[]
      it_events                         = gt_events[]
    tables
      t_outtab                          = gt_bsid.
Form..............: populate_for_fm
Description.......: Populates fields for function module used in ALV
form populate_for_fm using    p_row
                                    p_col
                                    p_fieldname
                                    p_len
                                    p_table
                                    p_desc.
w_fieldcat-row_pos = p_row.          "Row Position
w_fieldcat-col_pos = p_col.          "Column Position
w_fieldcat-fieldname = p_fieldname. "Field name
w_fieldcat-outputlen = p_len.        "Column Lenth
w_fieldcat-tabname = p_table.        "Table name
w_fieldcat-reptext_ddic = p_desc.    "Field Description
w_fieldcat-input = '1'.
append w_fieldcat to gt_fieldcat.
clear w_fieldcat.
endform.                    " populate_for_fm
*&      Form build_events
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
       exporting
            i_list_type = 0
       importing
            et_events   = gt_events.
read table gt_events with key name = slis_ev_user_command
                           into ls_event.
if sy-subrc = 0.
    move slis_ev_user_command to ls_event-form.
    append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_top_of_page
                           into ls_event.
if sy-subrc = 0.
    move slis_ev_top_of_page to ls_event-form.
    append ls_event to gt_events.
endif.
endform.                    " build_events
*&      Form USER_COMMAND
When user command is called it uses 2 parameters. The itab
passed to the ALV is in whatever order it currently is on screen.
Therefore, you can read table itab index rs_selfield-tabindex to get
all data from the table. You can also check r_ucomm and code
accordingly.
form user_command using r_ucomm      like sy-ucomm
                         rs_selfield type slis_selfield.
read table gt_bsid index rs_selfield-tabindex.
error checking etc.
set parameter id 'KUN' field gt_bsid-kunnr.
call transaction 'XD03' and skip first screen.
endform.
*&      Form top_of_page
Your own company logo can go here if it has been saved (OAOR)
If the logo is larger than the size of the headings in gt_page,
the window will not show full logo and will have a scroll bar. Thus,
it is a good idea to have a standard ALV header if you are going to
use logos in your top of page.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = gt_page
            i_logo             = 'ENJOYSAP_LOGO'.
endform.
*&      Form build_fieldcat
*Many and varied fields are available here. Have a look at documentation
*for FM REUSE_ALV_LIST_DISPLAY and REUSE_ALV_FIELDCATALOG_MERGE
form build_fieldcat.
w_fieldcat-fieldname = 'BUDAT'.
w_fieldcat-seltext_m = 'Dte pst'.
w_fieldcat-ddictxt(1) = 'M'.
Can change the position of fields if you do not want them in order
of the DDIC or itab
w_fieldcat-row_pos = '1'.
w_fieldcat-col_pos = '10'.
append w_fieldcat to gt_fieldcat.
clear w_fieldcat.
endform.                    " build_fieldcat
*&      Form build_page_header
      gt_page is used in top of page (ALV subroutine - NOT event)
      *H = Header, S = Selection, A = Action
form build_page_header.
For Headers, Key is not printed and is irrelevant. Will not cause
a syntax error, but is not used.
gs_page-typ = 'H'.
gs_page-info = 'Header 1'.
append gs_page to gt_page.
gs_page-typ = 'H'.
gs_page-info = 'Header 2'.
append gs_page to gt_page.
For Selections, the Key is printed (bold). It can be anything up to 20
bytes. It gets printed in order of code here, not by key value.
gs_page-typ = 'S'.
gs_page-key = 'And the winner is:'.
gs_page-info = 'Selection 1'.
append gs_page to gt_page.
gs_page-typ = 'S'.
gs_page-key = 'Runner up:'.
gs_page-info = 'Selection 2'.
append gs_page to gt_page.
For Action, Key is also irrelevant.
gs_page-typ = 'A'.
gs_page-info = 'Action goes here'.
append gs_page to gt_page.
endform.                    " build_page_header
Settings for the Logo :
01) GOTO - OAOR (Business Document Navigator)
02) Give Class Name - PICTURES
Class Type - OT
Object type - whatever you want to call your area EG: OURCOMP.... then Execute
03) Top left will say PICTURES. Bottom left will have multi tab. Select Create and double-click on Screen.
04) Select your image from the appropriate directory.
05) Give the image an appropriate name (not Screen)
06) It will tell you document stored successfully.
07) You can now find your logo under the heading OURCOMP in top left window.
08) You can reference the logo in things like FM REUSE_ALV_COMMENTARY_WRITE or any other area which may reference these things. EG: I_LOGO = 'OURCOMP'. You can preview image by double-clicking it.
<b>Please reward points if it helps.</b>
Regards,
Amit Mishra
Message was edited by: Amit Mishra

In IE if I set the zoom at lets say 150% it will stay that way even if I shut down. But with firefox, it goes back to small print every time I view a new page. Is there a way to set the zoom to stay at a larger size? Thanks, EH

# Question
In IE if I set the zoom at lets say 150% it will stay that way even if I shut down. But with firefox, it goes back to small print every time I view a new page. Is there a way to set the zoom to stay at a larger size? Thanks, EH

If you need to adjust the font size on websites then look at:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r45
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

I need to print a mirror image of a PDF on my iPad. Is this possible?

I need to print a mirror image of a PDF on my iPad for an iron on transfer. Is this possible? I have Pages and GoodReader but can't figure out how this would work on either app. Help!

Can't be done as an exact copy from one Mac to the other. The operating systems are system specific. First make sure your system doesn't need a firmware update to get 10.2 or later on it. You'll need to install 9 on it if it does, direct from a 9 retail CD that is compatible with it *. This disc can't say Upgrade, Dropin, or OEM. To determine compatibility, identify your G4 tower:
http://support.apple.com/kb/HT3082
http://docs.info.apple.com/article.html?artnum=42739
Then look at the OS 9 compatibility:
http://docs.info.apple.com/article.html?artnum=25517
Then apply the correct update
http://docs.info.apple.com/article.html?artnum=86117
The last Mac OS 9 to come retail is 9.2.1, and that's newer than 9.0.4, 9.0.2, and 9.1.
Your ghost image can be done using cloning software, but then you'll have to use a retail 10.3 installer and 10.3.9 combo update on the G4 tower. Then use the Migration Assistant to import the data from the clone of the iBook. The 10.3 retail disc looks like * and does not say upgrade, dropin, or OEM. The 10.3.9 combo update is here:
http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
The clone to an external hard drive can be done with these instructions*:
http://www.macmaps.com/backup.html The import of the external hard drive with the migration assistant can be done with these instructions:
http://docs.info.apple.com/article.html?artnum=25773

Need to print mailer info always on even numbered page

Similar Messages

Maybe you are looking for