Need to Re-Sync/Re-Start Staged Migration job for account/mailbox that has already had the on-premise account converted to Mail Enabled User

I kicked off a staged migration of a user account from my exchange 2003 server to exchange online and had a catastrophe on the mail server when a bug messed up the alternate delivery properties.
Long story short, I ran the export info and Exchange2003MBtoMEU.vbs scripts without the migration completing successfully.
I want to restart a staged migration, but now when I try to create a staged migration for that user, I get the error stating that "Unsupported source recipient type (Mailuser). Only mailboxes are supported."
Is there any way to undo the MB to MEU conversion? If so, can it be done temporarily, so that I can re-run a staged migration and then run the two MB to MEU conversion scripts once again when the migration is successful.
Thanks!

Before you do anything else, extend the "Deleted Mailbox Retention" on the mailbox database properties. The default is 14 das, and you are nearing that time. :-)
Once a mailbox has been converted to an MEU, it is no longer an on-premises mailbox. In order to "recover" the data, you can attempt to reconnect the mailbox (http://support.microsoft.com/kb/274343/en-us)
to a new mailbox, but that may be a frustrating experience, depending on the condition of your Exchange server. Then you have to still deal with how to get the data into a mail object in Office 365 (PST export, etc)
Another strategy (albeit, a more expensive one), is the third-party tool route that can extract the raw data from the EDB (after you down the mailbox store), and then importing that PST through the client Outlook.

Similar Messages

Need to make changes to the iMovie that has already been shared into iDVD

Can anyone tell me if it's possible to "update" or "reimport" the iMovie into the DVD project that has already had all the menus/buttons/text/dropzones formatted? I got almost to the end and realized I forgot to change the order of a couple clips. I really don't want to start all over in iDVD if it's possible to update it.
Thanks so much!

Can anyone tell me if it's possible to "update" or "reimport" the iMovie into the DVD project that has already had all the menus/buttons/text/dropzones formatted?
Yes, it's possible however iDvd doesn't always take well to rearranging any of the video assets.
Here's a very good practice directly from iDvd's Help Menu:
Moving or renaming project files on your hard disk
If you move or rename a file (for example, movie, slideshow, or a song) that’s used in your iDVD project while the project is open, the project will not be updated to reflect the change. As a result, when you burn the project to a disc, the moved or renamed file will not be included. However, if you close your iDVD project before moving or renaming project source files, iDVD can help you locate the files again when you reopen the project.
To find a project file that you moved or renamed:
Open your project.
A warning dialog indicates that one or more files are missing and asks you to find the missing items.
Click Find File and select a missing file.
If other missing files are in the same location, iDVD will find and relink these files as well.
To remove a missing file from your project, delete the reference to it in the menu, slideshow, or movie button, and save your project.
Hope this helps but if not just come on back.
Message was edited by: SDMacuser

TS3991 iWork doesn't seem to recognize that I already have the pages, keynote, and numbers apps so I can't use iCloud to sync my documents. How to get my apps recognized?

iWork doesn't seem to recognize that I already have the pages, keynote, and numbers apps so I can't use iCloud to sync my documents. How to get my apps recognized?

Do you have both the OS X and iOS versions of each of them?

I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I

I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
Thank you.

Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

So I need to buy a TV series on my family's account, and we want it just to charge the credit card and not the money from an iTunes Card that's already on the account. Is there any way to do this?

So I need to buy a TV series on my family's account, and we want it just to charge the credit card and not the money from an iTunes Card that's already on the account. Is there any way to do this?

I am pretty sure it will always use the credit card unless payment method is set to none.
That has been my experience anyway.
They already have the money from the gift card so would rather collect from your credit card.

When entering my phone serial number it shows "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."

Hi,
I had purchased an iPhone 5 last month and got the OS updated to iOS 7, yesterday.
The data cable was of very bad quality and when I took it to the retailer for replacement, they said that its not covered under the one year warranty.
Secondly, I have also been experiencing network coverage issues with this phone. So, I decided to contact apple care through the web. When entering my serial number/IMEI it says, "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."
Does anybody have any idea what the reason behind this could be.
- First time with iPhone and frustrated.
Briju

If you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from.

I need an Apple SuperDrive 8X Part No. 661-4279 for my MacBook Pro. Where is the best place to order one?

I need an Apple SuperDrive 8X Part No. 661-4279 for my MacBook Pro. Where is the best place to order one?

Some sites to check out.
http://www.powerbookmedic.com/Apple-SuperDrive-DVD-Burner-Drive-8x---Macbook-Pro -p-16916.html
http://www.macpartsonline.com/661-4279-superdrive-8x-double-layer-pata-15inch-2- 2-2-4-2-6ghz-macbook-pro-a1226.html
http://www.dvwarehouse.com/661-4279-DVD-R/CD-RW-SuperDrive-8x-Dual-Layer-PATA-fo r-MacBook--MacBook-Pro---NEW-p-37374.html
http://www.welovemacs.com/6614091r.html

When I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP

when I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP in English
== This happened ==
Every time Firefox opened
== start mozila firefox

This issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
The file dwmapi.dll is a Vista file and should not be present in Windows XP.
See also [tiki-view_forum_thread.php?forumId=1&comments_parentId=417674]

We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us.

i am going to buy iphone 5 32 gb from some before i bought i check the serial number of that iphone on apple web site to cross check but massage is appering that ......'
We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us....
can any one tell me what is that mean..... replace what ?

In most cases, what you said is true...however, this is not always the case. Take myself for example...
1: I posted my phone online to sell
2: Someone saw my serial number and called AppleCare to get a replacement phone
3: An inferior AppleCare representative bypassed a component validation (check serial number to the device on hand) and approved the replacement under my AppleCare plan.
4: After noticing this (about 4 days after it happened) and a trip to Apple and a call to AppleCare, all was resolved. My phone is back to being covered under AppleCare+
5: I learned my lesson.
So, as you can see, there is a chance that it can be something else. Although, if the person selling the phone notices, it shouldn't take long to resolve it. Chances are that it is what you said.
Hope this helps

We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us. iPhone 4s.

Hi everyone! I have iphone 4s, which was bought about 6 mounts later and has serial number C2*******TD6 and IMEI ****. When i try to check warranty on the page https://selfsolve.apple.com/wcResults.do i see
We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us.
And if i try to enter IMEI here i see
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.
Does it means, that I was bought a non exist iPhone? Or it was refurbished? I need an official answer to take them to seller because I was bought iPhone as a new.
Thank you.
<Edited By Host>

Not from Apple reseller( Im apologize, that you right) Seconв question: how can i contact apple via email to get an official answer?

I can not change the country setting on my Iphone 4 or pc because it says I need to spend the credit balance that is already on the account.

I can not change the country setting on my Iphone 4 or pc because it says I need to spend the credit balance that is already on the account.

Contact iTunes support, as only they can fix this:
http://www.apple.com/support/itunes/

ITunes syncs music that has already been loaded on my iPod?

For a while now, every time I sync my ipod (160 GB Classic)to iTunes on my Mac it syncs music that has already been synced on my iPod many times before. I've noticed it's usually the same set of songs every time, and I've checked the files to see if there is any reason why it would be doing that, but they are the same as everything else.
Any particular reason this is happening?

Not a clue, but it's happening to me, too. I have a 1st generation iPod Touch (16GB) and I get the same 15 songs synced every day I sync. It doesn't seem to happen every time, but pretty much every day. For example, if I sync twice while having the iPod plugged in (maybe after updating due to an application update, I might update again just to make sure everything worked.) Then the update is very quick with no backup or problem with the repeatedly synced songs. //sorry for the ramble.// Anyone else having this happen?

A few months ago I purchased Snow Leopard, but realized too late that I already had Snow Leapord. What I need is Snow Lion upgrade. I did not open the software. Will they refund refund this or exchange it for the Snow Lion upgrade?

A few months ago I purchased Snow Leopard, but realized too late that I already had Snow Leapord. What I need is Snow Lion upgrade. I did not open the software. Will they refund refund this or exchange it for the Snow Lion upgrade? Thanks!

All Updates to Snow Leopard are gotten from Software Update or from the Apple download site.
There is no Snow "LION". there is Lion and now Mountain Lion buit both of those are Download Only from the Mac App Store. You need to have Snow Leopard 10.6.6, .7 or .8 to have the Mac Apple store link on your Mac.
To get Lion you need to call the Apple Store, 1-800-MYAPPLE, and order it. They will send you a download code to your Apple ID Email address so you can download it from the Mac Appl Store.
Oh and when you call them to order Lion ask about returning Snow Leopard.

Do I need to buy a separate download of Mountain Lion for each Mac that I own?

Do I need to buy a separate download of Mountain Lion for each Mac that I own?

No, not if you bought it as an upgrade option.
Mountain Lion multi-computer installation license discussion - https://discussions.apple.com/thread/4142823
http://osxdaily.com/2012/07/26/install-upgrade-os-x-mountain-lion-multiple-macs/

I just updated to Numbers 3.0.1. In the old version if I started to type a name that was already in the spreadsheet, it would automatically fill it in. That doesn't happen in the new version. What am I missing to get that to happen?

I just updated to Numbers 3.0.1. In the old version if I started to type a name that was already in my spreadsheet (in another cell), it would automatically fill that name in. That is not happening in the new version. Am I missing something to get that to happen? Thanks

If you frequently enter repeating values in a column and don't want to type the same text over and over again, instead of just waiting for Apple's updates why not try using an enhanced feature in Numbers 3 that in many (probably most) situations is even better than "auto-complete"?
Numbers 3 has an enhanced Pop-Up Menu functionality that helps prevent typos or capitalization inconsistencies from creeping in and messing up your data. It is also much more efficient than auto-complete in Numbers for iOS, should you ever want to sync to an iPad or iPhone and do data entry there.
Pop-Up Menu is much enhanced over what it was in Numbers 2.3, and is easy to set up:
Select the whole column or range before formatting as Pop-Up Menu and your existing values in that column or range will pre-populate a menu automatically:
Then you can remove the values you don't want in the list, such as the column header (and possibly some previous spelling errors too!):
And after this easy one-time setup all you have to do thereafter is to choose from the pop-up list when you add rows:
See this post for more details on how this handy feature has been enhanced in Numbers 3.0.
Should you ever want to take your Numbers with you and do data entry on an iPad or iPhone, in a touch interface, pop-ups are much more efficient than typing the first few letters of items. You can scroll with ease through a list of dozens of items to make a pick. Anybody using Numbers cross-platform should favor Pop-Up so they can use their documents efficiently for data input on the go, which can be a productivity booster.
See this thread for this and other workarounds for Numbers 3.0.
SG

Need to Re-Sync/Re-Start Staged Migration job for account/mailbox that has already had the on-premise account converted to Mail Enabled User

Similar Messages

Maybe you are looking for