Need to see price for total stock value

gurus,,
please tell me how can i check total stock value price.
asap

you can check that in material master in accouting 1 view. You can check both stock and stock value in there.
Assign points if helpful

Similar Messages

  • GL account balance not matching with the total stock value

    Hi,
    The GL account balance is not matching with the total stock value in report RM07MBSTfor stock in transit, Can anyone please let me know, where should, I look into to verify the reason for difference.
    Quick response will be appreciated.
    Thanks & Regards

    I am able to solve this issue. My client has a customized report, which helped me to look into the details of stock in tranisit account. Stock in transit account actually include PPV and TPV alongwith standard cost.

  • Table name for opening stock value

    Hi,
    Can some body tell me the table name & the field name for opening stock value,
    (This is when you pass the date through LSMW at initial stage and it gets sits in which table)
    For ex. MB5B
    rgds
    Sonu

    There are many stock tables in SAP.
    if you load unrestricted use stock with value, then the quantity is going to MARD, quantity and value to MBEW.
    if material is batch managed, then stock per batch is going to MCHB, but still MARD and MBEW are updated.
    if you load non-valuated stock (material type UNBW), then only MARD is updated, no MBEW entry.
    and much more cases for consignment, sales order stock etc etc.
    If you try to find the values more than a month after the upload, and your materials had movements, then the old stock quantity at period closing is transfered to the history tables MARDH, MBEWH.
    If you load in the beginning of a month, then SAP calculates the opening stock by using the end of period stock and add/subs the material movements.Then you will not find the opening stock as a single number in any table.

  • Moving Average Price and Total Stock not updated for MTO scenario

    We are using MTO with planning strategy 20, individual collective indicator is 1 (individual requirement only) and price control is V for finished goods. We are facing the following problems after we perform GR of above FG from MFBF (Repetitive -run schedule header):
    1)Total Stock field (LBKUM)in Accounting View 1 remain as blank but the sales order stock is appear in Stock Overview screen.
    2)Moving average price does not updated after periodic settlement is carried out.
    It seem that problem can only be resolved if we change the planing strategy to MTS (ex:40), appreciate that if any of you can provide the solution.
    p/s: on ECC5 system.

    Hi,
    Good morning and greetings,
    The standard SAP says as below
    The Raw Materials should have MAP 'V' and the SFG and FG should have the price control as 'S' basically because the standard costing variant PPC1 uses the sequence of Standard Price as the first update at the time of price update and settlement.
    I presume MFBF is used for Repetitive Manufacturing and not for MTO scenario...Repetitive Manfuacturing is MTS scenario...Goods receipt of production order is normally done through MB31.
    If you still want to use the MAP for FG and SFG then you will have to change the costing variant appropriately to pick the MAP first at the time of goods receipt and settlement.
    Please reward points if found useful.
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Moving Average Price for Sales stock and Project stock of a material

    Hiya Gurus,
                     I am developing a report to display inventory details. My requirement is that I have to display the Moving average price of a material for all Valuation type. I also need to display the Moving average price if a material has got Project stock or Sales stock.
                     In MBEW table I can get the Valuation type and its Moving average price, but how can I find the moving average price for the same material if it has got Sales stock and project stock. Please let me know the table and field where I could get the relevant data.
                    Kindly help me on this, it would be deeply appreciated.
    Cheers,
    ZIa

    Hi
    can you look at tables
    EBEW                             Sales Order Stock Valuation
    QBEW                             Project Stock Valuation
    Nat

  • Moving Average Price for non stock material

    Hi All,
    We are looking at loading a large number of material masters for items that will not be stocked - i.e. an account assignment will always be provided during purchasing.
    When we load these materials - what should the moving average price on the accounting tab be set to? If we put an estimated price in - then when we purchase we will get a warning if the variance between the purchase price and the moving average price is too great. And then when the material changes in price (in lets say a year because the vendor has increased prices by 10%) we can no longer update the moving average price.
    What is the best practice in this scenario?
    Kind Regards,

    non stock material (standard material type NLAG) does in general not have accounting views, hence it has no fields for moving average prices.
    however it can be customized to have an accounting view, we did it too. This  servers the requisition process, with accounting view the price defaults to the requisition. without accouting view, the valuation price needs to be entered manually by a user in the requisition.
    The MAP gets only updated if the stock is posted to inventory, which will never be the case for non-stock material, because of this you should always be able to change the MAP directly in the material master with MM02, or if not possible in MM02 with MR21.

  • Average price for WBS stock

    Dear All!
    We have a situation where we need to assign every material in the system to Materially responsible person.  For that we are reviewing the usage of WBS elements.  In an organization there can be a number of materialy responsible persons, and the prices are to be averaged within an organizaiton.
    Can you please advise if it is possible to average price for material through the range of WBS elements stocks in which the material is stored?  So, as a result I need the quantities to be updated separately for each special WBS stock, but with every receipt to any of the special stock the average price to be updated in every special stock.
    I would appreciate your prompt answer.
    Regards,
    Maira

    Hello!
    Is there anyone who can advise on this issue?
    Regards,
    Maira

  • Report for monthly stock value

    Hi SAP Gurus,
    Is there any report or transaction that can show monthly stock value based on plant/GL account balance ?
    Thanks for your help.
    Regards,
    Raj

    I personally do not trust info structure data which are basis to MC.9 and MC.5
    basis for MB5L is audit relevant data, while info structures are only statistics.
    Ideally the data should match, but if for some reason the update to the info structure fails, then the financial posting still happens as they are technically not in the same LUW.

  • Idoc data - Need to see the full SDATA field value

    My SAP system is 4.6C. I need to see and extract the field data of the SDATA field in the EDID4 table. The field size in se11 is showing as of 1000 characters, but the field data when displaying is getting truncated. The message that comes below is Field SDATA is too wide to display (field will be truncated) --> Message no. MO 441 --> The field SDATA is more than 200 characters long. --> the system response comes as The field is output in a format restricted to 200 characters. So, it seems that the data after 200th character is getting truncated.
    How can i increase the display field of the SDATA field???

    It is not possible to view the IDoc data directly in the database. You need to use either WE05 transaction for an existing IDoc or WE60 to view the documentation and layout for each type.
    In a nutshell, there are different segments, each with their own layout, but it's not efficient to create database tables with separate fields for each segment. So all the data is stored in "raw" format and then, knowing the segment code, it may be correctly parsed into a readable format.

  • APPLE: We Need An Upgrade Price for Logic Pro X!!!

    There has always been an Upgrade path for Logic Pro. Where is it???

    I've been using Logic since it was Notator 2.5 as well, upgrading every time, and I have absolutely NO PROBLEM with their being no upgrade price.
    Reasons?
    1. Even at the full price, Logic X is cheaper than any ProTools upgrade price.
    2. It is a ridiculously powerful piece of software which can do things I was only dreaming of being able to do 20 years ago. Frankly I think $200/£139 is astonishingly good value for what it can do.
    Perhaps people should stop convincing themselves that software manufacturers somehow 'owe them'  just because they're long-term users? Apple has delivered a  piece of professional level software at a remarkable price - for that I'm actually pretty thankful!
    Nobody ever said doing professional quality audio was cheap.

  • Including "Total Stock Qty" and "Total Stock Value" in Slow movingitm Query

    Dear Guys,
                    Regards.I am using the standard "Slow moving Item's Query" based upon the "Slow moving item Multiprovider".The Query design is as follows:
    Filter:
    0CALDAY(PERIOD FROM/PERIOD TO)
    Rows:
    0MATERIAL(VARIABLE-OPTIONAL)
    0MATERIALGROUP(VARIABLE-OPTIONAL)
    Columns:
    Structure>Number of Records(KF)>Restricted upon Characteristic"Infoprovider(0material)".
    ReceiptTotalValue
    IssueTotalValue.
    But when i include the "TotalStock Qty" in the Query design,the system throws an error..(
    Abort system error:RSDRC/FORM CONVERT_SEL_TO_SELC NO CORRESPONDING SFC ENTRY
    Abort System error in program RSDRC_NCUM_ROUTINES and form READ_REF_POINT-1-).
    The client wants the "Stock value" to be displayed as in MC46 Report(R3) in the BW Report aswell.Would appreciate your timely help on this..
    Manythanks
    Arun

    Any sugestions ??

  • No Output/Values for valuated stock value(0VALSTCKVAL).

    Hi,
    I have valuated stock value(0VALSTCKVAL) in the inventory cube. This is non-cululative key figures with inflwo and outflow (0RECVS_VAL and 0ISSVS_VAL). This contains the data in the cube (atleast 0RECVS_VAL contains the data).
    But to surprise 0VALSTCKVAL do not show any data in the  query result (just show zero values)
    I have checked the aggregation at infoobject level - it is Aggregation- sum and Exception Aggregation-last value but still do not show any data.
    can some one please tell me why it happen and how to get values in the valuated stock value(0VALSTCKVAL).

    Hello,
    Have you loaded the data using BX, BF and UM into the cube and compressed the requests using proper marker updates?

  • Wrong values for Total stock - Inventory managment ( negative values)

    Hi,
    I loaded inventory management load
    2LIS_03_BF   INIT 01.06.2009 - 06.7.2009 No Marker Update (compressed with check)
    2LIS_03_UM  INIT 01.06.2009 - 06.7.2009 No Marker Update (compressed with check)
    the first quantity received is from 11.06.2009  and 0RECTOTSTCK is showing 300 which is correct.
    on 10.06.2009 it is showing -300 for 0TOTALSTCK when it should be 0 since there hasn't been any data.
    whats the right way to compress my cube if I don't want to load BX and how can I resolve this.
    thanks

    Hi,
           The standard process to get correct values in report is
    1. First u have to do init laod from 2LIS_03_BX and u have to compress the request with 'no marker update' chk box unselected.
    2. Next u have to do init load from 2LIS_03_BF and u have to compress the request with 'no marker update' chk box selected.
    3.  Next u have to do init load from 2LIS_03_UM and u have to compress the request with 'no marker update' chk box selected.
    4. Normally u can run delta loads from BX and BF data sources. ( Compression is not mandatory. Even if u compress it will improve the performance)
    Regards,
    Thilak

  • Free item for total order value

    Hi experts......
    i Have a scenario.....
    in a supermarket there is an offer.. saying if you buy for a total value of 500 rs... a gift of wort 100 rs is free.......how to configure this?
    Samatha

    Hi there,
    Is your $100 free applicable on the purchase of any goods?
    Then this is what you need to do. Define a new discount condition type. Define a new table with sales org / order type & assign it to the access seq of the condition type. Maintain the condition type in your pricing procedure. In the requirement routine of the condition type, put a customized logic. For that pass the net value of the order into a subtotal. In the customized logic, read the value from the sub total. If it is >= $500, then only the new discount condition type should apply. In the condition records maintain a value of $100.
    This will ensure that if the value of the SO is >= $500, then $100 discount will be granted.
    Or if your discount is based upoon purchase of a particular item, then this is what you do.
    For this we need to define the Free goods determination procedure. We need to have a customized code in the requirement routine that we assign to the condition type NA00. Pass the net value of the order into a sub total. In the code put a logic that system reads the net value in the sub total. If the value is >= 500, then only NA00 will apply.
    When maintaining the condition records, select 'inclusive' on the top menu bar.
    Hope this helps.
    Regards,
    Sivanand

  • What is the standard transaction code to see price for a material

    can anyone tell me what is the stadard t code to display price of a material for different customers the input contains sales organization distribution channel material valid on and end date
    Urgent
    thanks

    Use condition maintenance function (VK31) to meet your needs.
    Go to VK33 to display pricing reports, choose conditions > by customer, narrow down results by specifying org units, validity periods, customer and material range, condition type etc.
    Or at SE43, display area menu cond_av, where you can find out what pricing reports constitute this menu i.e your condition maintenance screen. If it is a routine task, creating an area menu may be needed.
    At V/LA, pricing reports can be easily created to suit specific requirements. Then newly created reports can be added to area menu via SE43.

Maybe you are looking for