Need to shutdown GG process if 1 node of the RAC is shutdown?

if only 1 node of the 2-node RAC cluster is shutdown, Does GG have to come down as well or can it run against the 1 node that is up.
Thanks

Apologize for wrong answer to this post, due to site network issues wrong page was opened, hence wrong answer was posted earlier.
Hi,
If one of the node is down, OGG Extract also breaks down as it is unable to process that particular redo thread. As you are aware, in a RAC environment, the Extract process uses threads, one for each redo thread in the RAC cluster.
Hence the only way to restart the Extract is to exclude the node(redo thread) by using THREADOPTIONS PROCESSTHREADS EXCEPT <thread spec>.
Example: THREADOPTIONS PROCESSTHREADS EXCEPT 2
Extract threads are mapped to redo threads, so while excluding the thread please verify the mapping correctly and exclude the right thread.
SQL> select distinct THREAD# from gv$log;
Caution: Excluding any of the Extract threads from being processed excludes that data from being synchronized with the target tables.
Once the node is back online, you could comment out the above parameter in the Extract parameter file and restart the Extract to process all the redo threads in RAC.
Hope this information helps.
Thanks & Regards
SK
Edited by: Santhosh on Aug 2, 2011 9:51 AM

Similar Messages

Retrieve data from other context node within the same context

Hi Experts,
I want to redefine method BUILD_TABLE for a table context node and I need to access data from another context node within the same context. I have looked through the methods of class CL_BSP_WD_CONTEXT_NODE_TV but could not find a mean of retrieving the other context nodes.
Any ideas?
Thanks a lot. Your help is appreciated.
Cheers,
Jens

Hi Jens,
Check this [wiki|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=201066680] it should be helpful.
Regards,
Shobhit

Change hostname on nodes in STANDY RAC Cluster

Hi,
I would like to know the required steps to modify and hostname configuration in Oracle RAC if I update the hostnames of the 2 nodes in the RAC
Im running Redhat EL 5 , Oraclle 11g
Thanks in advance

I don't think you could change the hostname with CRS, without re-installing CRS.

Returning to a previous Node in the process.

Does anyone have a good pattern for returning to a previous node in the process?
I can't think of any way to do it that is not exceedingly cumbersome, especially
considering that I Want to be able to return to almost any node from any other
node.
To state in a slightly different way,how do I move "back" in the process.
Thanks, ken

I have read that you can loop back accept across AND/OR joins. Or is it
just OR? You can even loop back to the node itself; what else are you
looking for? Oh! Pattern, well just analyse and test again and again don't
break the joins rule (per above) and do have an exit :) in the loop. Also
there are other rules for parallel paths which need to be followed for your
own sanity (in case you have parallel paths as part of the loop).
Need more specifics to be any more helpful,
Raoon Kundi
214 566 7878
[email protected]
"Jared" <[email protected]> wrote in message
news:3f4cf869$[email protected]..
>
I have no idea if this works the way you want it to, but can you use an'Unmark
Task Done' action?
"Robert Varga" <[email protected]> wrote:
Put it in a loop which has its test condition at the end.
"Ken Clark" <[email protected]> wrote in message
news:3f4520b9$[email protected]..
Does anyone have a good pattern for returning to a previous node inthe
process?
I can't think of any way to do it that is not exceedingly cumbersome,especially
considering that I Want to be able to return to almost any node fromany
other
node.
To state in a slightly different way,how do I move "back" in the
process.
>>>
Thanks, ken

5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America

Step 5.
5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America, you can look up a local number here. For now, check out all the great free features of Creative Cloud! Get started with trials
I keep getting this.
The Bank and Paypal states that Adobe needs to process my transaction twice.
I have no order number/ no status nor contact from Adobe. I called customer service and he transferred me to sales where the phone rang with no answer.

Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Is it wise to keep the Nikon camera files "DSC's" after downloading them and converting to DNG files via Adobe converter for lightroom use. In other words do the DNG files have all the raw data I would ever need in processing or should I save the camera'

Is it wise to keep the Nikon camera files "DSC's" after downloading them and converting to DNG files via Adobe converter for lightroom use. In other words do the DNG files have all the raw data I would ever need in processing or should I save the camera's DSC files?

DNG files do not contain some metadata supplied by the camera, which can be used by the manufacturer's software. Thus, if you don't keep the original Raw photo, you will lose this information.
If your 1000% sure you're never going to use the manufacturer's software, then this isn't a problem. But who can be sure what software you will be using 10 years from now?

Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
Thanks

You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars

Need help with batch processing picture packages

Hi, I am having trouble batch processing picture packages is CS2. (Windows).
I have hundreds of images that need to be processed into picture packages and would love to find a speedier way to do this.
I know how to create an action. I know how to batch process from this action. I also know how to create picture packages, but I cannot get the final result I am after - please read on....
I have seperated all the images into their seperate folders for each style of picture package required.
I can create an action for the picture package required and then do a batch process on the particular folder, but this leaves all the picture packages open on the desktop - as when you chose the close and save in the batch process - this only closes and saves the original image - the picture package has been created as a new document and is on the desktop still open - named Picture Package 1, Picture Package 2 - etc etc.
I hope I am making some kind of sense here... (??!!)
What I would like to happen is that the picture package will be saved over the original file (or to a new folder) with the original file name of the original image or maybe even with an adjustment to file name (e.g - orignal file name sc1234.jpeg - new file name sc1234packA.jpeg)
So is this possible to do?? I'm thinking there must be a way.... i'm sure there are many group photographers out there who come across this everyday??
Otherwise I have to save each picture package manually to original file name (via searching though files to match the original image to the picture package....) Very time consuming.
Thanks for your help (in anticipation)...
Jodie

hmm - thanks for that - sounds like I will have to try and find some info and assistance regarding the scripting - it may be something I need to look into at a later time in the future....
At the moment though I will have to plod along with this method I guess!
Thanks for your assistance...
Jodie

Need to increase max process in the init file. Please check and correct me

Friends,
We have Oracle9iR2 database in the RHEL AS 3.0 box.
Sometimes we are getting ORA-00020, means the max process is reached.
We have planned to increase the max process from 150 to 250 in the init.ora file.
i think the init.ora will be in /u01/app/oracle/admin/ourdb/pfile/
correct me if i am wrong......
Step1: vi init.ora file and change the process from
processes=150
to
processes=250
while the database is running.
Step2:shutdown the database and start the database.
is there only 2 steps or i have to shutdown the db at the beginning itself?
Or i have to take any precautions. Our server is HP ML-370 with dual processor.
Thanks
Sathyguy

hi sathy
SQLNET.AUTHENTICATION_SERVICES
Purpose
Use the parameter SQLNET.AUTHENTICATION_SERVICES to enable one or more authentication services. If authentication has been installed, it is recommended that this parameter be set to either none or to one of the authentication methods.
Default
None
Values
Authentication Methods Available with Oracle Net Services:
none for no authentication methods. A valid username and password can be used to access the database.
all for all authentication methods
nts for Windows NT native authentication
SQL> conn hr as sysdba
Enter password:
Connected.
SQL>--change sqlnet.ora ( authentication setting to 'NONE')
SQL> conn hr as sysdba
Enter password:
ERROR:
ORA-01031: insufficient privileges
Warning: You are no longer connected to ORACLE.
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> show user
USER is "SYS"
SQL>
set processes parameter through two methods
first.
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> show parameter spfile
NAME                                 TYPE        VALUE
spfile                               string      D:\ORACLE\DB_1\DATABASE\SPFILE
                                                 ORCL.ORA
SQL> show parameter processes
NAME                                 TYPE        VALUE
aq_tm_processes                      integer     0
db_writer_processes                  integer     1
gcs_server_processes                 integer     0
job_queue_processes                  integer     10
log_archive_max_processes            integer     2
processes                            integer     150
SQL> alter system set processes = 175 scope=spfile;
System altered.
SQL> show parameter processes
NAME                                 TYPE        VALUE
aq_tm_processes                      integer     0
db_writer_processes                  integer     1
gcs_server_processes                 integer     0
job_queue_processes                  integer     10
log_archive_max_processes            integer     2
processes                            integer     150
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size                   787988 bytes
Variable Size             145488364 bytes
Database Buffers           25165824 bytes
Redo Buffers                 524288 bytes
Database mounted.
Database opened.
SQL> show parameter spfile
NAME                                 TYPE        VALUE
spfile                               string      D:\ORACLE\DB_1\DATABASE\SPFILE
                                                 ORCL.ORA
SQL> show parameter processes
NAME                                 TYPE        VALUE
aq_tm_processes                      integer     0
db_writer_processes                  integer     1
gcs_server_processes                 integer     0
job_queue_processes                  integer     10
log_archive_max_processes            integer     2
processes                            integer     175
SQL>
second method.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> create pfile from spfile;
File created.
SQL> startup pfile=D:\oracle\Db_1\database\initorcl.ora
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size                   787988 bytes
Variable Size             145488364 bytes
Database Buffers           25165824 bytes
Redo Buffers                 524288 bytes
Database mounted.
Database opened.
SQL> show parameter spfile
NAME                                 TYPE        VALUE
spfile                               string
SQL> show parameter processes
NAME                                 TYPE        VALUE
aq_tm_processes                      integer     0
db_writer_processes                  integer     1
gcs_server_processes                 integer     0
job_queue_processes                  integer     10
log_archive_max_processes            integer     2
processes                            integer     175
SQL> --- now my database is start through pfile instead of spfile and i will
SQL> -- change in pfile again processes parameter 150.
SQL> show parameter processes
NAME                                 TYPE        VALUE
aq_tm_processes                      integer     0
db_writer_processes                  integer     1
gcs_server_processes                 integer     0
job_queue_processes                  integer     10
log_archive_max_processes            integer     2
processes                            integer     175
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup pfile=D:\oracle\Db_1\database\initorcl.ora
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size                   787988 bytes
Variable Size             145488364 bytes
Database Buffers           25165824 bytes
Redo Buffers                 524288 bytes
Database mounted.
Database opened.
SQL> show parameter processes
NAME                                 TYPE        VALUE
aq_tm_processes                      integer     0
db_writer_processes                  integer     1
gcs_server_processes                 integer     0
job_queue_processes                  integer     10
log_archive_max_processes            integer     2
processes                            integer     150
SQL>
1. Why can't i just edit the init.ora file to change the processes=250 while the db is running?
you can edit the init.ora file.
If i edit the init.ora file by shutting down the db will there any problem
not problem
init.ora file is text file you can edit easly
spfilesid.ora file is binary file you can not edit directly ... if you want to edit spfile file first change in pfile then create spfile from pfile...
hope this helps
Taj.

Need to have 'variable name' node in the converted XML data.

i am converting the abap data to xml using cl_xml_document. in the converted xml data, i need to have one more node. in the below example, i want a node <variable name="productionOrderDetails"> to come after the Data node.
?xml version="1.0"?>
<Data>
     <item>
          <DISPO>100</DISPO>
          <PLNBEZ>F126</PLNBEZ>
          <GAMNG>300.000</GAMNG>
          <ERFMG>285.000</ERFMG>
          <PRE_PROD>100.000</PRE_PROD>
          <PRE_BLOG>0.000</PRE_BLOG>
          <BLOG_MTD>144.000</BLOG_MTD>
          <BAL_PLAN>144.000</BAL_PLAN>
     </item>
</Data>
thanks in advance

Hi ,
you can use class IF_IXML_NODE, first you need to read (go thru ) XML then need to Insert a New Node.
ref SAP Program BCCIIXMLT1/BCCIIXMLT*
regards
Prabhu

What's status of my order? We need more time to process your order.

I cannot find on the Adobe site where to find the status of an order.
Last Saturday I placed an online order for an annual subscription to the CC Photography package. After I had completed all the steps a message was displayed on my browser that read something like "We need more time to process your order." There was also a statement that said something to the effect that I would be contacted by email the next business day, but I have seen nothing.
I'm certain this is not the place for questions about order status, but when I followed the steps in Contact Us, this is where I wound up. I prefer to use email or the internal messaging system rather than phone, so I can have a record of what was said.
Thanks - Dave

This has been a colossal hassle. Notice there's no reply to my question here about how to contact whoever the rep res referring me to.
When you go through the order process it doesn't ask how your name appears on the credit card. I'm "Dave" here, but on my credit card I'm David. Maybe that's why it didn't go through. Maybe it isn't wise to order on the weekends (I placed my order on a Saturday).
In two chat sessions the rep said he (or she) would escalate the case and I'd hear in 24-48 hours. Never heard a thing.
I finally went through the order process on a Friday, edited my profile with my real name and it went right through. I chose to download Photoshop CC 2014. I got a Web page with the header Downloading now... or something like that. But there was no activity indicator. I tired the forum but the entire forum was down. Finally after a useless chat I opted to start the download again. The CC Application Manager started up and displayed a progress bar. When it was finished I got a message saying the download had failed. After a couple more tries I got PS and Bridge downloaded successfully then downloaded Lightroom. BTW, you don't get the install files. It installs as it downloads. You can't tell it where you want it installed. For us with a tiny boot SSD it's a squeeze.
I've reactivated my Lynda.com membership and am catching up on what's new in PS CC 2013 and 2014. Photoshop CC seems to be behaving OK, but I'm not sure if Adobe is ready for prime time. Do you suppose they had a hand in crafting Healthcare.gov?.
- Dave

Need to track windows processes through java code.

Need to track windows processes through java code.
Eg: I want to find out whether an exe file (wrun.exe) is running or stopped.
Can I do it through java. If so can any one please tell me how to do it. That will be a great help.
Thanks,
Ramesh

There are 2 options for things like this:
1) Use Runtime.exec() to execute some command or application and parse the input from it.
2) Write some native code and use JNI to call it.

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to download the camera Raw Version 8.3 ?

While the G9 RAW files can be read by Adobe Camera RAW and Lightroom, these file are unsupported at this time. Here is a link to Adobe's latest list of cameras that are supported and this list came out yesterday http://www.adobe.com/products/photoshop/cameraraw.html
I have not done a comparison between Lightroom and Canon's software but others have and say that Canon's software is clearly better. I am sure when Adobe updates their software again to include the G9 it will be a very good RAW converter as it is will most other cameras.

RAC -process failover at node crash

Hi,
how to prevent running process(transaction) from termination in RAC while a node crashes ..
Ex: if there is a process running on node 1 and if it suddenly crashes in RAC how does we make node2 or node3 to pick it up and process or start the transaction again??
Thanks,

Hello,
Look at your tnsnames.ora entry and see if it configured to benefit from FAILOVER, you can aslo explore other available options options
http://stanford.edu/dept/itss/docs/oracle/10g/network.101/b10776/tnsnames.htm
myservice=
(DESCRIPTION=
   (SOURCE_ROUTE=yes)
   (ADDRESS=(PROTOCOL=tcp)(HOST=host1)(PORT=1630))    # <-- hop 1
   (ADDRESS_LIST=
     (FAILOVER=on)
     (LOAD_BALANCE=off)                                # <--- hop 2
     (ADDRESS=(PROTOCOL=tcp)(HOST=host2a)(PORT=1532))
     (ADDRESS=(PROTOCOL=tcp)(HOST=host2b)(PORT=1521)))
   (ADDRESS=(PROTOCOL=tcp)(HOST=host3)(PORT=1521))    # <-- hop 3
   (CONNECT_DATA=(SERVICE_NAME=myservice)))Another Example
MYSERVICE =
(DESCRIPTION =
(ADDRESS_LIST=
     (FAILOVER = on)
     (LOAD_BALANCE = on)
     (ADDRESS= (PROTOCOL = TCP)(HOST = server1)(PORT = 1521))
     (ADDRESS= (PROTOCOL = TCP)(HOST = server2)(PORT = 1521))
     (ADDRESS= (PROTOCOL = TCP)(HOST = server3)(PORT = 1521))
(CONNECT_DATA=
     (SERVICE_NAME =MYSERVICE)
     (FAILOVER_MODE =
         (BACKUP=server2)
         (TYPE=select)
         (METHOD=preconnect)
         (RETRIES=20)
         (DELAY=3)
) Regards
OrionNet
Edited by: OrionNet on Dec 18, 2008 3:12 PM

ALE/IDOC Configuration needs to do Asynchronous processing

Hi,
I have generated the partner profile for sending and recieving system and has created a synchronous process.
I need to do asynchronous process so what should I do?
So when I am trying to DISTRIBUTE the model view it giving me the error.
If any one can answer i appreciate them.
Thank you,
Mili.

Hi Mili,
Please add manually message type <b>SYNCH</b> for partner profile (WE20) LS <b>SNX125LS</b> then try again to distribute the model view.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Need to shutdown GG process if 1 node of the RAC is shutdown?

Similar Messages

Maybe you are looking for