Need to update resource name in user XML

Hi Friends,
I Need to update resource name in user XML. Suppose I have one user say 120120 and he has resource "ABC" assinged to him.
When I rename resource "ABC" to "XYZ" and search the user 120120, it is showing me "XYZ" resource is assinged to 120120. this is right.
But same thing that is resource "XYZ" is not getting updated in **User XML**.
Thanks,
Sun_SIM

Hi William,
I don't know of any standard report of Function module which will directly update the addrress of location , however you can develop a custom report for update of addreess of plant from R/3 to SRM using the Function module "BUPA_ADDRESSES_GET' , "BUPA_ADDRESS_CHANGE" and table 'ADDR'.
use " BUPA_ADDRESS_GET" to get address number using the partner id of location.
search on table 'ADDR" with the address number to get the address detail .
compare the address detail with the R/3 plant address.
use function module "BUPA_ADDRESS_CHANGE" to update the address.
hope this would help.
Please reward points for helpful answer.
cheers!!
Iftekhar Alam
Message was edited by:
iftekhar alam

Similar Messages

[svn] 2934: Update resources/config/messaging-config. xml to reflect the recent changes to throttling code.

Revision: 2934
Author: [email protected]
Date: 2008-08-20 14:47:00 -0700 (Wed, 20 Aug 2008)
Log Message:
Update resources/config/messaging-config.xml to reflect the recent changes to throttling code.
Modified Paths:
blazeds/trunk/resources/config/messaging-config.xml

O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons).

Need to update the name

I need to update the name on my best buy account with my marriage name please and thanks.
How do i go about doing this? Thanks

Hello chriscandy876,
Welcome to the Best Buy forum, and congratulations on getting married!
If you have gone about the legal process to change your last name and have the necessary paperwork, then I could potentially help update your My Best Buy account. Please send me a private message with the below information, by clicking on the blue button in my signature, and I will see what I can do to further assist.
Name
Phone #
Mailing address
Email address
Thank you for reaching out to us and for being a My Best Buy member.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Need to update PDF template based on XML data source - POAWDSF33 in PO

I need to update a seeded PDF template - POAWDSF33 which is pdf type in Purchasing PO application to add some columns & reformat template according to client needs.
This template picks data from two xml based Data definition [Award Data template] :
PO_STD_PO.xml
POAWDFPDSNG.xml
As of now what i understand is , to download acrobat 5 pdf & edit PDF template...but how shall i update XML document which as queries..i think i have to add some columns in queries.
Please help me..any pointers would be very helopful.

Hi Ranveert,
For PDF template -
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481159.htm
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T518230T518233.htm#4536893
For Data template -
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T434255.htm
Complete doc -
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/toc.htm
Thanks,
Vignesh

Need to reference file name within the XML Output

Not sure if this is possible, as I'm new to the livecycle/XML world. But I need to be able to reference a file within the XML output from the PDF.
The Scenario is that a pdf form of a business card will be issued to 50 franchisees for them to type in their names and mobiles, click submit and the XML file to be sent to myself, and be imported in to InDesign populating their data ready for printing. Up to here I have it working perfectly.
However as each franchisee have a combination of up to 5 logos to place in the bottom corner to save having to have various templates with different combinations of logos and having to ensure the correct templates are used. I intend to reference each companies combination as an EPS and make the reference within the xml out and have it import directly in with the other data. I can type the code directly within the xml but I would like to have the form reference it directly in the xml output. Is this possible or am expecting to much of livecycle? Any help/advice greatly appreciated.
David

Hi MadhavaGanji,
I have post how to validate the file name, header row against definition table which stored the file name and column definition.
Take a look and see if this is helpful.
http://sqlage.blogspot.com/2013/11/ssis-validate-file-header-against.html
http://sqlage.blogspot.com/

Override JNDI names in persistence.xml and @resource annotation

I have a Java EE 7 application that I am developing for use with both GlassFish and WildFly, but I have discovered that both application servers use a slightly different format for specifying JNDI names.
In GlassFish the persistence.xml file references the data source jdbc/myDataSouce, but in WildFly the data source needs to be java:/jdbc/myDataSource.The same is also true for classes that are annotated with @Resource. In GlassFish the annotation for a class using JavaMail would be @Resource(name = "mail/myMailSession"), but to deploy onto WildFly this would need to be @Resource(name = "java:mail/myMailSession").
The only solution I've got at present is using Maven to create two different releases of the EAR file, with one EAR file containing a persistence.xml file with the data source jdbc/myDataSouce for use with GlassFish, and the second EAR file containing a persistence.xml file with the data source java:/jdbc/myDataSource for use with WildFly. Unfortunately, I haven't found a solution for the @Resource annotation.
I've taken a look at the documentation for glassfish-application.xml and glassfish-ejb-jar.xml and have tried using resource-ref to override the JNDI names but the application fails to deploy due to an error in the name.
My question is does GlassFish provide any capability to override the JNDI names specified in the persistence.xml file and classes with the @resource annotation?
Many Thanks
Paul

Have you been able to solve this? I'm attempting to understand what Web Server 7 can do with regard to Java Persistence and what elements of it require Glassfish.
I've also spent great amounts of time in WS6.1 trying to figure out why a JNDI resource couldn't be found. The rules of thumb I've learned are:
- Try dropping the *'java:/comp/env/* prefix; just use jdbc/pact part
- Make sure all referrences (in web.xml and sun-web.xml) are identical with regard to that name.
I'm hoping you're not still dealing with this (it's been two months!) but if anybody else stumbles on this, maybe it'll help them.
Dave

Need to Update Customer Address and Email Adress in AR

Hi ,
I am new to AR.
I need to update Customer name and Email Address in AR. Can you please provide me if there is any API or Interface Exist.
Also please provide me the steps and the maditory values which we need to provide during the updation.
Regards
Suresh P

Check irep.oracle.com to find out about all available APIs
Also check
Oracle Integration Repository Documentation Resources Release 12 (Doc ID 396116.1)
IREP - Oracle Integration Repository: The Tool To Find Which API Is Supported and How To Use It ... (Doc ID 554986.1)
Hope this answers your question,
Sandeep Gandhi

How to get the name of User NT

I need to get the name of user NT that access to my web site (intranet),
I was used the class NTSystem but this return the name of user NT of the server, but I need the current user that access to the site.
Thanks a lot!
yaguip

not sure if this is what you're after, but it returns the os user of the jvm..
try this...
System.getProperties().getProperty("user.name");
Takis

[svn:bz-trunk] 10020: Had previously updated user-agent string for Opera 10 in resources/config/ services-config.xml on DataServices/trunk.

Revision: 10020
Author:   [email protected]
Date:     2009-09-04 07:35:51 -0700 (Fri, 04 Sep 2009)
Log Message:
Had previously updated user-agent string for Opera 10 in resources/config/services-config.xml on DataServices/trunk. Forgot to do this for the file on BlazeDS/trunk.
Modified Paths:
    blazeds/trunk/resources/config/services-config.xml

Revision: 10020
Author:   [email protected]
Date:     2009-09-04 07:35:51 -0700 (Fri, 04 Sep 2009)
Log Message:
Had previously updated user-agent string for Opera 10 in resources/config/services-config.xml on DataServices/trunk. Forgot to do this for the file on BlazeDS/trunk.
Modified Paths:
    blazeds/trunk/resources/config/services-config.xml

My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password whenever I need to update apps it shows his previous user name, and is asking for his password. How do I fix that?

My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password, whenever I need to update apps it shows his previous user name, and is asking for his password. How do I fix that?

dom59 wrote:
Ok, when I go into my Apple ID account, everything looks right. It does show my user name. It's only on the iPod that it shows my husband's previous user name, and it asks for his password. Everything in iTunes and my account looks right. The issue only seems to be with the actual device, iPod Touch 4th gen.
There is more than one way to access the Apps Store and the iTunes store. One is via iTunes on your computer, and the other is via the apps on your iPod.
Just because you are logged in on your computer does not mean you are logged in on your iPod.
The reason your husband's user name comes up is because he was the last one to log on. You can change that by going to Settings>Store. Tap the Apple ID, Tap Sign Out, Tap Sign In, Tap Use Existing Appel ID, enter your e-mail address and Apple ID password, and tap OK.

Using Update Resource User

Hi,
I have a requirement where I need to update a user who is not in IDM but in the resource, I need to update few attributes of this user in LDAP.
Here is what I am doing to meet this,
I am calling the subprocess Resource Object Retries where
op =updateResourceObject,
objectType=user
user = user object I builtWhich is most similiar to Out-Of-Box workflow Update Resource User
My workflow works fine for when the user in windows NT (not in IDM) is updated, but when I am doing this for a user in LDAP, I am getting Objet class violation (error code =65) . I tried passing object class as
<list> and <LIST> //xml Object and XPRESS .Still it is the same.
I need some rescue here.
I was wondering where is the Out-of-box Update Resource User
method called.
If any one has worked , using updateResourceObject service ,
help me.
thanks,
pandu

Hi pandu345,
Hint to reduce side effect error - one thing about objectclass violations:
Consult the directory server error log to see which attribute caused the error!
In case you modified the schema to be nonconformant to already existing entries you will always get objectclass violations not matter what you try to modify. (I have suffered that already in a non-IdM-but-ldap environment)
/h

HT5625 I want my new iPad mini to use my new Apple ID, not the old one that pops up without seemingly giving me the choice to update the Apple ID user name; as a result I haven't been able to update my APPS for some time.

I want my new iPad mini to use my new Apple ID, not the old one that pops up without seemingly giving me the choice to update the Apple ID user name; as a result I haven't been able to update my APPS for some time. I changed my apple ID when I got a new e mail address a few months ago .

Any apps you have installed from the old AppleID will always be tied to that AppleID. You have no choice but to enter the password for the old AppleID if you want to update apps downloaded using that ID.
The only way to stop being asked for the password for the old AppleID is to remove all apps from the device that were downloaded using that old AppleID.
You'd then need to re-download (and re-purchase) any apps you want to keep using under the new AppleID.
Apps cannot be transferred between AppleIDs.

Need to update the xml clob-pls pls help!

my xml is stored as blob, i can view,do string manipulation and churn out data etc...but now i have a request where i need to find some particualr node and modify its value.
here is what i m doing now which works.
select compressor2.blob_decompress2(xml_data) into l_blob
from tablename where id=2008890;
clob_data := utl2.blob2clob(l_blob);
parser := xmlparser.newParser;
xmlparser.parseClob(parser, clob_data);
doc := xmlparser.getDocument(parser);
nl := xmldom.getElementsByTagName(doc, '*');
len := xmldom.getLength(nl);
dbms_output.put_line('Length : ' || len);
tag_name := 'Node Verson : ' || xmldom.getVersion(doc)|| ' ';
for counter in 0..len-1
loop
tag_name := '';
node := xmldom.item(nl, counter);
parent_node := xmldom.getParentNode(node);
child_node := xmldom.getfirstchild(node);
tag_name := 'Parent Name : ' || xmldom.getNodeName(parent_node) || ' ';
tag_name := tag_name || 'Node Name : ' || xmldom.getNodeName(node) || ' ';
IF xmldom.getNodeType(child_node) = xmldom.TEXT_NODE THEN
tag_name := tag_name || 'Node Value : ' || xmldom.getNodeValue(child_node)|| ' ';
ELSE
tag_name := tag_name || 'Node Value : Node has child.No Node value.' || ' ';
END IF;
tag_name := tag_name || 'Node Type : '||xmldom.getNodeType(child_node) || ' ';
ele_name := xmldom.getDocumentElement(doc);
child_nl := xmldom.getElementsByTagName(ele_name,'*');
IF xmldom.isNull(doc) THEN
htp.p('Document is null');
ELSE
htp.p(tag_name);
END IF;
end loop;
b_blob := utl.clob2blob(tag_name);
select compressor2.blob_compress2(b_blob) into b_blob2 from dual;
insert into xupdate values (2008890,b_blob2);
i still need to know how to update the xml clob... i want to know how to find the particular node and then modify the clob with the new value. rest i can update the table.
pls pls help..on this.

my oracle version.
10.2.0.1.0
i want to update here..
<?xml version="1.0" encoding="utf-8"?>
<TestData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
 <Status>CompletedNormally</TestCompletionStatus>
 <ComputerName>DUILT10</ComputerName>
 <StartTime>2008-03-19T15:12:23</StartTime>
---Some more noded----
<Parameters>
 <RangeMeasured>
 <Name>PDissBol-5[C]</Name>
 <Min>1.22</Min>
 <Max>1.36</Max>
 <Units>W</Units>
 </RangeMeasured>
 <TextMeasured>
 <Name>ComputerName</Name>
 <Value>DUILT10</Value>
 </TextMeasured>
 <RangeMeasured>
 <Name>TrackError25[C]To-5[C]</Name>
 <Min>0.031</Min>
 <Max>0.041</Max>
 <Units>dB</Units>
 </RangeMeasured>
 <RangeMeasured>
 <Name>Power-5[C]</Name>
 <Min>1.988</Min>
 <Max>1.061</Max>
 <Units>dBm</Units>
 </RangeMeasured>
---some more noded---
</Parameters>
</TestData>
the file is huge.
what i need to chang==>
I 1st need to find this PDissBol-5[C] within the <Parameters> Node and then change its <Min> and <Max>
and then update the table.
pls pls suggest.

Need to update another users iweb site

I wan't to take over updating duties on another user's iweb site. They can't handle it so they'd like to defer to me. Is there a way to do this?

You will need to obtain their Domain.sites2 file from their computer. It will be located in their User/Library/Application Support/iWeb folder. Copy it to your Desktop, rename it to represent the site name, "Site_Name.sites2", and place in your User/Library/Application Support/iWeb folder. Then drag that iWeb folder into the left hand pane of any Finder window so you can easily access the contents of that folder and select the site you want to work on.
Click to view full size
OT

User update needed after updating to Yosemite

Hi,
A few days ago I updated my MacBook Pro to Yosemite, the update was fine and everything seemed working.
First there were 2 users, my account and a guest user and my user profile had no picture and says "update needed" rather than my name. The update complete and then everything works as normal. I did a new update of Yosemite and then there were always 2 users but the note "Update needed" disappeared. Again I loaded Yosemite and since this whenever I shut down and restart my macbook, I type in my password and then there is an update. After this I can work as normal.
Any ideas how to solve this? Should I load Yosemite again?
Thanks

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Need to update resource name in user XML

Similar Messages

Maybe you are looking for