User update needed after updating to Yosemite

Hi,
A few days ago I updated my MacBook Pro to Yosemite, the update was fine and everything seemed working.
First there were 2 users, my account and a guest user and my user profile had no picture and says "update needed" rather than my name. The update complete and then everything works as normal. I did a new update of Yosemite and then there were always 2 users but the note "Update needed" disappeared. Again I loaded Yosemite and since this whenever I shut down and restart my macbook, I type in my password and then there is an update. After this I can work as normal.
Any ideas how to solve this? Should I load Yosemite again?
Thanks

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Similar Messages

Thunderbolt Firmware Update 1.2 keeps reappearing in the App Store Update even after updating many many times. I have no Thunderbolt cables connected.

Thunderbolt Firmware Update 1.2 keeps reappearing in the App Store Update even after updating many many times. I have no Thunderbolt cables connected. I am running OS X 10.9.5.

Hide Update in Mavericks
Try re-indexing Spotlight.
Spotlight – Re-index

TS3274 How do you delete updates icon after updating?

Unable to delete update icon after updating is complete.

You can't delete them.
It will start dropping the earlier updates after about two weeks (on a first in first out basis)

I cannot update apps after upgrading to Yosemite. Please Help!

Hello,
After upgrading to Yosemite, i wanted to go on to iMovie, but i have to update. So i try to update but it refuses and tells me: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
So what i understand is because i bought this mac in the US and I'm using it in the UK its not letting me update it. But what i don't understand is that i was able to upgrade to Yosemite with my mac knowing i was in the UK.
How can i update my applications?
Thank you for your time,
TOAOMA

Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept it and the other iLife/iWork applications into your Apple ID, do so.
2. Move them out of the Applications folder(they may need to be put into the Trash temporarily), and then see if you can download them for free from their individual product pages. If you're asked to buy them, see #3.
3. Click here, contact Apple, and wait for a response.
4. Buy them.
(116660)

IPhoto update failure after updating to yosemite

Updated to yosemite, now I can't use iPhoto without updating that too.
Error message when I try to update iPhoto : "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled". Neither is true, no other option or explanation given. The iPhoto was bundled with the computer when I bought it in 2009, never had any updating problems until now, checked Apple ID and it is the correct one. This was obviously caused by the update so why is a fix not obviously available. Makes me wonder what other problems will arise.
How can I get the proper update?

Error message when I try to update iPhoto : "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled". Neither is true, no other option or explanation given. The iPhoto was bundled with the computer when I bought it in 2009, never had any updating problems until now, checked Apple ID and it is the correct one. This was obviously caused by the update so why is a fix not obviously available. Makes me wonder what other problems will arise.
That means, that iPhoto has not been associated with your AppleID. You do not say, which iPhoto version you are trying to update from.
Associating iPhoto with your AppleID should have happened, when you bought the computer with iPhoto preinstalled with MacOS X Lion or later or with the Mavericks upgrade, if your Mac came with SnowLeopard. Try, if you can "accept" iPhoto now:
Sign into the AppStore with your AppleID
Open the "Purchased" tab. Do you see iPhoto with an "Accept" button?
Accepting associates your Apple ID with the preinstalled iPhoto. It should move iPhoto from the "Accept" portion of the App Store to the "Purchased" tab. After that, you should be able to update iPhoto from the Updates tab of the AppStore.
If you do you not see the update there, try to buy iPhoto. iPhoto may show for free, so you do not have to pay again.
Backup your iPhoto library, if you do not have a current backup.
Uninstall iPhoto by deleting it from the Applications folder, otherwise you cannot buy it again. But do not empty the Trash, so you can put iPhoto back, if need be.
Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
Open the main page "Featured" of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/
After you update iPhoto, your iPhoto Library will need upgrading. Make a backup of your iPhoto Library, before you open iPhoto the first time after updating.

Is there any way to disable "Checking Your Add-ons" window that comes when user starts Firefox after update for the first time?

we have over 1500 firefox users and its very confusing to them if after update they start their Firefox and this "Checking Your Add-ons" window comes.
It would be much appreciated if it can somehow skipped this or do it silently.

Unfortunately this link does not help.
We currently have 3.6.x versions of Firefox in most computers, and if i do a silent install via sccm to version 12, then if user starts the new firefox for the first time, it checks addons, like java quick starter and browsing protection (f-secure) etc. Second time when they start firefox, it starts normally.
My question is - is there some way to avoid this first run addon compability checking?
I've tried numerous preferences in mozilla.cfg, nothing helps so far.

Macbook Pro Users - Skype Problem after updating?

Do you guys have the same problem?
After updating your Mac , Skype does not work properly.
Either it lags, or your video just do not pop out.

What backups do you have?

I can't update apps, after updating to iOS 5

After updating to ios5, all updates of apps cannot continue, but I can download new apps from the AppStore

I am having the exact same problem. When i go to update my existing apps - it asks me to type my password for my initial apple id (upon upgrade i needed to change it to the @soandso.com) but it wont take my password. When i try to download new applications it works - my new apple id comes up and everything works fine.
i tried restoring my phone, changing my settings, etc.
When i try to update in itunes it gives me a notification along the lines of "cannot update do to not holding majority of ..."
did you find a solution?
Very Frustrated...

SCCM 2012 R2 CU2 Update - Need to update console or clients as well?

Hi,
I am going to be installing the following update onto out SCCM 2012 server:
http://support.microsoft.com/kb/2970177/en-us
I am not 100% sure but is there a need to update all installed consoles and/or all sccm clients after the CU2 installation?

Site server, console and clients needs to be updated.
Full installation guide : http://www.systemcenterdudes.com/sccm-2012-r2-cu2-installation-guide/

Before update and after Update trigger

Hi,
I am following the below approach to overcome ORA-04091: table XXXX is mutating error.
1. In the after update row level trigger i am capturing rowids of changed rows into a table type (of type rowid) defined in a package.
2. In the after update statement level trigger i am using the data from the table type ( that got populated in the first step) to do my work.
3. In the before update statement level trigger i am resetting the table type defined in the package.
Now, can the below situation occur causing the system to fail
1. A Update to the table occurred causing the before update statement level trigger to fire and reset the table type.
2. After that row level after update trigger gets executed and captures the required data.
3. Now before the after update statement level trigger gets executed a new update to the table happened ( to some other row as multiple users are using the application) causing the
before update statement level to fire and erase the data from the table type?
I want to know if above situation can occur or is the execution or before and after update triggers atomic?
Thanks for helping.
TIA
Harsha

A collection in a package is local to the session. And a given session can be processing one SQL statement at a time. So any concurrent updates would be happening in a different session with a different logical collection.
You may encounter problems if your session is trying to update the same rows that other sessions are trying to update (whether via the original update statement or via the updates issued by the trigger). You could encounter performance problems because of row level locks or you could encounter deadlocks. But your session's collection won't be initialized by some other session's actions (other than DDL that replaced the package itself).
Justin

User account missing after upgrade to Yosemite?

I have a mid-2010 iMac which up until recently I had two user accounts on for general use and one for music (Garageband, Logic and audio files etc). After upgrading to Yosemite, this separate user has vanished. I'm left with my original admin account, and a guest login. If I search for any of the files using spotlight, they do show up, but if I try to open them I get the message "you do not have permission to open this document". Also I had folders on the desktop of the music account which contained files, these folders show up in a search but are listed as empty? The files themselves are 'blank white sheet' icons as if they have no application.
I would assume this is a lost cause if not for the fact that my hard drive (more than half of which was taken up by the 'music' user) still reads as pretty much full up. So have I wiped all this forever?
Thanks in advance,
Dave

retina MacBookPro mid2012. Clean install of OS X Yosemite 10.10
I'm randomly missing an account at login screen after reboot.
Sometimes I can fix it with booting into my initial account 'Kevin' (userid 501) and then changing to different login 'Christina' (userid 502).
But if I log out from my account, the second account is missing. Same if I do a reboot.. This have me in stitches as I ofcause has the need for privacy from each account.
Both accounts are set up as admins, guest is deactivated.
rMBP 16gb sep2012.
userid 501:
home directory: /Users/Kevin
userid 502:
home directory: /Users/Christina
apart from that... I have loads of problems with Bluetooth, and hand-off only working 1 way (5s with 8.1) where only iOS -> OS X works, not vice-versa.

Keeps on updating apps after updating

App store keeps on updating apps after they have been updated already in a previous session, showing the same updates as the time before.
Somehow doesn't recognize the update installed.

Just 'Pages', iBook Author and a Solitaire game.
After updating, a day later it shows that they need to be updated again. An Apple support person told me to uninstall the particular apps and then redownload these apps from the store. This should solve the problem according to her.
Next time they show up for updating, I will try this.

Lync 2013 updating databases after updating Front End servers

We have a front-end server pool consisting of 3 Lync 2013 servers and a back end of 2 SQL servers using SQL mirroring. All servers are Windows 2008 R2.
Following the instructions in
http://support2.microsoft.com/kb/2809243 , I verified that the servers were all ready for updates, then I ran the
Stop-CsWindowsService -Graceful cmdlet to stop the Lync services on the first FE server, then I ran LyncServerUpdateInstaller.exe to install the updates. After the updates were installed, I restarted the server, waited for Lync services
to all start, then repeated the process on the next 2 servers in turn. This was all successful.
I am now looking at step 2 in this document, applying the back-end database updates, and I have a problem and some questions. The problem is that all the databases had the principal copy on the mirrored SQL server. I ran the recommended Invoke-CsDatabaseFailover
-NewPrincipal Primary cmdlet repeatedly, using all the database types I could find, but I still have two databases (database names
xds and lis) on the mirrored server. Since the cmdlet requires a database type, what type of databases are the xds and the lis databases?
Once I get that done, I an still unsure of exactly what to run to update the databases. The KB article states to run Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose .  Do I type this in exactly
as stated, or is FEBE.FQDN a variable for our SQL server or some other entity in our environment? If I do use the actual SQL Server name in that, do I run it twice, using the name of the mirrored SQL server the second time?
Thank you very much for your help.

Hi Logan Burt,
Central Management store database files
Data file or log purpose
                Xds.ldf
Transaction log file for the Central Management store
                Xds.mdf
Maintains the configuration of the current Lync Server 2013 topology, as defined and published by Topology Builder
                Lis.mdf
Location Information service data file
                Lis.ldf
Transaction log for the Location Information service data file
And you could verify if Lync Server 2013 database updates have completed successfully.
How to Verify if Lync Server 2013 Database Updates Completed Successfully
http://blogs.technet.com/b/dodeitte/archive/2013/07/02/how-to-verify-if-lync-server-2013-database-updates-completed-successfully.aspx
Best regards,
Eric

Mac OS X lion update but after updating D: drive partition is missing is missing any help

Hello I have just updated to Mac OS X lion but after updating when I restarted my macbook pro into windows 7 via boot camp I notice that my D:/ drive partition is missing.
More Details:
Before OS x Lion I was using windows 7 on macbook pro that I have installed via boot camp. After windows installation I have create an other partition from boot camp drive but now when I updated OS x lion my windows 7 D drive is missing but windows is restarting and working properly just No D drive (250 GB).
Any help ?

..Step by Step to fix your Mac
Erase, formatting, OS X installs on Mac's
http://www.everymac.com/ultimate-mac-lookup/
http://mactracker.ca/
https://support.apple.com/kb/HT1237
https://support.apple.com/kb/HT2213

Unable to update child after update search criterium of parent

Hi,
I'm using JHeadstart 9.0.3.1, Application Structure: BC4J-ServiceFile-UIX.
I'm not able to update a child-record (child-records on new page) under the following condition:
- I have a Search-TablePage-DetailPage Construction with a number of level-2 pages for the child-tables.
- I make a query for a particular parent table record
- Next I update the field on which I queried so that it does not match the original query-criteria.
- Next I try to insert a child-record on a level-2 page
- Error; no child-records saved.
Is this a known bug/feature? Is there a workaround?
thanks,
Anthonie

Jan,
As promised:
The problem occurs in all level-1 pages. After update of a field so that it does not match the original search criteria we see the following:
1) level-2 pages which had a number of 'new rows' do not show any 'new rows' anymore
2) Level-2 pages which have an insert-button are not capable of inserting child records. The error returned is:
Cannot find accessor attribute named ContactenView. Make sure ViewObject FunctionarisView has a viewlink with a Destination Accessor Name that equals ContactenView. If such a ViewLink is present, make sure the MVC Framework process or Struts action that triggered this error (typically GetChildDataSourceSet) specifies the childAttribute in addition to the child resource interface name.
java.lang.Exception: Cannot find accessor attribute named ContactenView. Make sure ViewObject FunctionarisView has a viewlink with a Destination Accessor Name that equals ContactenView. If such a ViewLink is present, make sure the MVC Framework process or Struts action that triggered this error (typically GetChildDataSourceSet) specifies the childAttribute in addition to the child resource interface name. .....
regards,
Anthonie van Dijk

User update needed after updating to Yosemite

Similar Messages

Maybe you are looking for