NEEDED "Hot Sync USB Cable for Palmone Zire 31 PDA"

I am looking for a Hot Sync USB Cable for a Palmone - Zire 31 PDA. I have searched the internet up and down yet, all places I've browsed are either out of stock or the item is out dated. Yes, I know that I've had it since 2005 but it is still in perfect working condition and I'm not going to rock the boat and buy an updated one when I have one already.
If there is someone out there who can assist me with locating the above referenced cable please let me know.
Admin Support Services
http://www.ppsvirtualservices.com
http://www.trhodes4.qhealthbeauty.com
http://www.virtualbliss.blogspot.com
Post relates to: Zire 31

Here, www.pdaparts.com
link to the cable http://www.gethightech.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=PA2064&Category_Code=SC
Post relates to: Treo 800w (Sprint)

Similar Messages

Hot sync usb cable

instructions on how to crank this puppy up say "press hot-sync button on usb cable". No gots! Musta been lost 08/05. Anyone know where to get?
This question was solved.
View Solution.

The Z does not have a cable with a hotsync button. The device does come with a screen tap for hotsync. It should look like two arrows going in a circle chasing each other. Connect the USB cable that came with this device and tap on this icon.

I need a replacement USB cable for Zen Stone P

I lost the USB cable today so I can't charge or transfer music.
Is there anywhere I can get a replacement cable
Amazon has a generic cable but I'm sure it would be best to get a Creative one
However I can't find one for sale!
Thanks!
Joe

Those USB cables are available in many department and office supply stores. There's no real reason to order one online unless you enjoy paying shipping charges. It's pretty much a standard item these days.

Can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

thanks

What USB cable for in car use?

I have just received my brand new car & it has a USB dock to plug your Iphone 4 in to use through the Stereo/Screen but have been told it needs to be a particular USB cable for it to work?
Can anyone inform me what USB cable i am actually looking for as a standard USB charging one does not work?
Thanks

What kind of car? I use a stock Apple in my 10' Acura TL and it charges and connects fine.

Can I use the same USB cable for both the iPhone and the iPad?

Brnad new user of the iPad - can I use the same USB cable for both the iPhone and the iPad? The iPad does not charge when plugged into the computer or the wall (110V) adapter. I've been able to sync in iTunes using the same cable on both.

Actually, the iPad charger works just fine with iPhones and iPods. The iPod/iPhone charger will charge an iPad very slowly but no harm will be done.

No usb cable for wireless use on new modems

My internet company recently changed my modem and I'm not longer able to use my printer, which ran wirelessly. From what I've been able to find out I apparently need a USB cable and I don't have one that fits the printer. Is there another way around this. Printer is not able to find the computer apparently and all the troubleshooting I've been able to do says the printer is offline.
thanks

This is the USB cable you need, a Printer USB cable.
http://www.amazon.com/Belkin-Hi-Speed-USB-Cable-Feet/dp/B00004Z5M1
However you need to contact your ISP to fix their issue of why their new gateway device broke your wireless printer. It is their responsibility.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Why iMac goes into coma booted in Ext HD Tiger hot plugging USB cable?

Folks:
Had this question posted as "iMac goes into deep coma w/hot plugging USB cable??" on the "using your iMac G4" forum, got 63 views but have not received any replies there. Since I was booted up in Tiger 4.11 on my FW Ext HD, thought I'd try to post over here to see if I get some sage advice from this forum.
Was trying to experiment with ways to get my scanner to work if I finally decide to upgrade my iMac to 10.4.11 by booting up Tiger using External HD by firewire and then plugging in the scanner after that. As soon as the USB plug touched the port the computer "went black"--total crash. Took about 5 mins before I was able to resuscitate the machine with the power button. I repeated my experiment in the same manner and down she went again, down and out . . . . Tried to start it for a few minutes, nothing, went to dinner, came back, nothing. Finally, unplugged it for a minute and then she came back to the land of the living . . . .
When I restarted from the 10.1.5 internal HD I plugged the scanner in and opened the scanner app in Classic and all was fine. I like being able to use Classic apps and if it wasn't for the fact that my Camino browser is starting to crash when browsing the newer websites I'd have no reason to upgrade. Even if I get a new Intel computer I won't be able to boot back into the Power PC operating systems, right?
Anyway, would like to know if it is "well known" that you can't hot plug peripherals when booted up in external HD or if this is a "special problem" that only I am experiencing?
Thanks,
e.e.p.

Since the issue could be in the peripherals or the computer involved, this could
be a hardware failure of some kind. If you have replaced the USB cable, and all
other variables have been double or triple-checked, even a problem with the
computer's power supply could be at fault. Or there may be a partial short in one
of the electrical circuits involved with this USB cable and whatever it supports.
Please re-explain these other operating systems and their locations, since the
10.1.5 and other stuff seems irrelevant. Unless there is a hardware failure.
And that is a possibility.
If you got an old early model Intel mac with 10.4.11 running in it, that would not
support Classic OS9 based apps directly. However, there are several sources
for replacement parts and also complete repaired and guaranteed PPC Macs.
There are limits in some, in what OS X versions and practical uses they may
allow now, with less online support & dwindling apps to run on the older OS X.
You may be able to look into the system logs and crash reports, via Console
Utility, to see what kinds of errors reports & crash logs the computer created.
Also, in System Profiler, there should be a Software> Logs section and it may
have some recent activity logs there. You can compare log creation times with
the intervals of these failures and see if a report matches your experience in
a real-time error log or other.
Is this USB port where the failure occurs, located in the external drive enclosure
or in the computer attached to it? What kinds of external FireWire devices and
USB devices are involved? Have you ran just the bare-bones computer & seen if
there are problems in just that, by itself? Troubleshooting invites checking it alone.
If there is an overload of some kind regarding a power supply failure under
only some circumstances, you could try a powered USB hub when using
several items attached to the computer; so it would carry that load.
Anyway, it sounds like a magical mystery tour is in store, in there.
Good luck & happy computing!
{ edited }

Usb cable for ipods

Hello,
I have a usb cable for my ipod touch that i used quite often (for reacharging ipod or using it to sync my ipod) and one day i sadly discover that the cable was broken on one of the end of it. I still have the waranty.... Is there anyway that apple accept to replace it?
Thanks

ShishirG wrote:
If you have had your iDevice for under 1 year, then yes your covered by your warranty which will fix/replace anything for free.
They will fix or replace anything that's considered a manufacturer's defect. They will not replace things that are damaged.

Usb cable for L1950 monitor

I need a USB cable for my L1950 monitor so that I may connect it to my new laptop. What cable do I need?

While I see that the monitor does have a USB port, that port does not connect for monitor use. Now if that part of the monitor is what you want to connect, not to display but as a USB hub, then a regular USB cable will work for that. What you need to use the monitor as a monitor on a laptop, then you need either a VGA cable or a DVI cable, depending on the available ports on the laptop.
After looking at that model's features, it is not clear that a monitor can be connected, unless you have a HDMI port or use a USB to monitor adapter.
Also , I must have replied while OldGeekster was posting.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

If not successful:
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try another USB port and cable
Try another computer to help determine if you have an iPod or computer problem

Which is better a bluetooth or usb cable for conne...

i'm using a GPRS for my internet connection. i'd like to ask which is better a bluetooth or usb cable for connectivity? does a bluetooth or usb cable affect the performance of my connection? which one got a better data transfer rate and does not always drop a connection?

USB is better and faster

USB cable for i-pod nano 3rd generation

I recently bought a new i-pod 3rd gen and used my USB cable for the i-pod classic 80 GB which seemed to be working fine.But after when I tried to use the original USB cable for the i-pod nano it wouldn't connect to the i-pod.
Does anyone know whether it is OK to use the cable for the i-pod classic and why the original cable does not fit with my i-pod nano?

can somebody help me?

I lost the USB cable for charging. Where should I buy it from?

I lost the USB cable for my ipod shuffle and I can't charge right now. Where can I get it back or buy it from?

Buy it from Apple.
http://store.apple.com/us/product/MC003ZM/A?fnode=MTY1NDA0OQ
B-rock

I am looking for a usb cable for K! that allow using a USB stick on tablet

I am looking for a usb cable for K! that allow using a USB stick on tablet.
Lenovo no long makes this item. Was wondering if anyone has one to sell or something.
Ron Mc

Assuming your tablet support USB OTG, try this one:
http://www.amazon.com/gp/product/B0081CRXGI/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1

NEEDED "Hot Sync USB Cable for Palmone Zire 31 PDA"

Similar Messages

Maybe you are looking for