Needing feedback for doubts about my almost-a-week-old 2012 MBP

I have a 2012 model, the base-15-inch one from 2012. It's been almost a week since I bought it from the store (an iShop, which is a chain of "premium" Apple resellers in Mexico). Although it's nearly new and expectations leave no room for unpleasant details, obviously, I've started noticing these details, which actually make me somewhat anxious:
The most relevant one: I can hear noises when opening the lid. They resemble those plastic cracking, as if something about the hinges was incorrectly adjusted, and it's annoying. It also worries me that, further on, I could start having real problems with the screen angles, positioning and whatnot, due to a wear-down of these parts. The screen also closes a bit harder than what I could consider as normal. I took it to the store from where I bought the laptop and I got told that the noises were "normal" (as if everyone else should expect to hear the same), and that the feeling of the lid closing abruptly was because it's "new", so it needs to be used more in order for the screen to move more smoothly. I ended up feeling very frustrated because I think they just wanted to convince me of sticking with this one, when, actually, I visited the store because of the 5-day-warranty they announce about changing the whole thing for a new one. It was the last day. I need helpful opinions about this: What should I do? Should I worry? Is it normal as they say?, because it doesn't seem that much to me.
The color or birghtness on the very borders of the LED screen appear to be lighter.
The LEDs that show when the computer is in stand-by appear to be a bit dimmed on the left side, very subtly, but still.
Software:
It just happened twice that, when just opening iTunes, the window appeared behind the top bar. The first time I couldn't move the window.
When I change from one full-screen to the main one, the "top bar" (what's the proper name?) makes a glitchy move to the right, really quick.
I need some opinions regarding what I should worry about in each case, and what I should do, too. I still have the 1-year Apple warranty, though, naturally speaking.

I have 2 MBP's tah make a slighthoise when opening and closing them, been like that for years. The other issues are not right. I would bring it in ans equest a new one. Hurry:)

Similar Messages

TS3276 I need feedback for the following issue. When I send email from this 27 inch iMac, the computer adds a string of characters in vertical column that represents the QWERTY key board, all alpha numeric characters are included. Yahoo mail, issue only o

Restating my issue / question...
When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
Hence, I have ruled out the issue is a yahoo mail matter.
Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
Any ideas?
GMc

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I need feedback for my grammar thanks

you did not said anything and quit flamming up other user by wasting my time

Sorry.
Actually, I did have a reply there, but it failed to post.
My thoughts on it were that you do not merely need an editor, but a tutor. I think it would be helpful if you followed a few rules, which will improve your writing substantially:
1. Read your story to yourself, out loud. Whenever you pause to breathe, place a period or full stop. Then capitalize the next character and continue.
2. Before someone speaks, press the "Return" or "Enter" key twice, making a new paragraph. Each change of speaker needs a new paragraph. Place the words a person speaks within " " marks.
"Hello," he said.
"Hi," the other guy said. "Have you had breakfast?"
"Not yet, let's go for coffee."
3. Pace your story. Tell it step by step. Don't rush, and jumble it together. you have all the time you need, so go slowly and be thorough.
4. Choose whether you will tell the story in the present tense or the past tense: He says, he does, he runs, or he said, he did, he ran. Be consistent once you choose. I recommend the past tense.
I believe that your story started by introducing two characters. I would introduce them (after your style) like this:
There was a man named Samuel. He had only one friend: a German bodybuilder named Arnold Wolfhouse.
Notice how I have taken your one long sentence and made it into small brief parts. I removed the entire clause about being a bodybuilder of German descent, and put it into the introduction.
Now, with that said, I have another suggestion: It seems like you might be more comfortable writing in another language, instead of English. Perhaps you would do better to write in that other language, and then translate the entire thing into English, or have it translated, instead of trying to write it in English.

Need feedback for new site

I need your opinion. What do you think about the design of a
new website I am developing.
www.globalkiteboarder.com/index3.php
Thank you!

"Salabinha" <[email protected]> wrote in
message
news:gg7dni$365$[email protected]..
>I need your opinion. What do you think about the design
of a new website I
>am developing.
> www.globalkiteboarder.com/index3.php
>
you're doing your includes wrong. you now have multiple HTML,
HEAD, TITLE,
and BODY tags. which are part of the reason your site doesn't
validate and
contains 155 errors and 95 warnings:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.globalkiteboarder.com%2Findex 3.php

Need help for information about cisco AP

hi,
i'm actually writting a report about wireless LAN. inside this issue i would like to make comparison between cisco aironet 350 series AP with cisco aironet 1200 series AP in general. i've alreally make quite a number of attempt using google, but i still cant find the best info n solution. cant anyone help me??
thanks!!

Hi Vincent,
Here is some good info on the 350 and 1200AP's. Don't forget in your report to note that the 350 series is "End of Sale/End of Life";
Cisco Aironet 350 Series Access Points
http://www.cisco.com/en/US/products/hw/wireless/ps458/products_data_sheet09186a008009247c.html
Cisco Aironet 350 Series Product Literature
http://www.cisco.com/en/US/products/hw/wireless/ps458/prod_literature.html
Cisco Aironet Hardware Frequently Asked Questions
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a0080094d01.shtml
Cisco Aironet 1200 Series Access Point
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_data_sheet09186a00800937a6.html
Cisco Aironet 1200 Series Product Literature
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_literature.html
Cisco Aironet 1200 Series Access Point FAQ
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
Hope this helps! Good luck with your report.
Rob
Please remember to rate helpful posts........

Doubt about Report Suite Office in SCCM 2012

Hi all,
I have a question about Suite Office in SCCM 2012.
Why in my report 07B - Computers that recently used a specified executable program
when I specific Office 2010 don't display nothing about Outlook?
Just display follows softwares: Word,Excel,PowerPoint,Visio and Project. Someone have idea?
Thanks.

Do you have Software Metering enabled for that executable?
Mike Leach | http://blogs.catapultsystems.com/mleach/default.aspx
Mike Thank's your opinion...my answer....Yes, I do.My software metering is OK.
My doubt is why Microsoft Outlook don't display as being part suite Office?
Is necessary I select Microsoft Outlook (separately) for do my software metering but I think this is not correct, because the correct is suite Office contains: Word,Excel,Visio,Project,Powerpoint
and Outlook...
So when I selected Microsoft Office 2010 display all softwares as I saw in my first post and any about Outlook.
Thanks any suggestions.

Only backups offered by TM for a full restore are two weeks old.

I just tried to do a full restore from Time Machine, booted from the install disk.
When it got to the "chose which back up" step it only offered me three backups, from the 4th, 5th and 6th October.
The TM drive is an external USB connected directly and has been running regularly without errors. I was to able to enter Time Machine and go to dates much more recent than 6th October.
I have sorted out the problem which caused the need to restore without TM, but I would like to understand why I couldn't do a full restore from a more recent TM backup, for the future.
Thanks

I hope it is OK to paste the prefs file:
START
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>AlwaysShowDeletedBackupsWarning</key>
<false/>
<key>AutoBackup</key>
<true/>
<key>BackupAlias</key>
<data>
AAAAAAEeAAIAAQhUaW1lTWFjIAAAAAAAAAAAAAAAAAAAAAAAAADG2QQ0SCsAAAAAAAEI
VGltZU1hYyAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAsbZBDQAAAAAAAAAAP////8AAAkAAAAAAAAAAAAAAAAAAAAA
CFRpbWVNYWMgABAACAAAxtj2JAAAABEACAAAxtj2JAAAAAEAAAACABFUaW1lTWFjIDpU
aW1lTWFjIAAADgASAAgAVABpAG0AZQBNAGEAYwAgAA8AEgAIAFQAaQBtAGUATQBhAGMA
IAASAAAAEwARL1ZvbHVtZXMvVGltZU1hYyAA//8AAA==
</data>
<key>DestinationVolumeUUID</key>
<string>017FC86D-0AF0-3AD2-B913-3BE24663D99A</string>
<key>ExcludeByPath</key>
<array>
<string>/Users/michaelb/Library/Calendars/Calendar Cache</string>
<string>/Users/michaelb/Library/Safari/WebpageIcons.db</string>
<string>/Users/michaelb/Library/Mail/Envelope Index</string>
<string>/Users/michaelb/Library/Mail/Metadata/BackingStoreUpdateJournal</string >
<string>/Library/Preferences/FLEXnet Publisher</string>
<string>/Users/michaelb/Library/Preferences/ByHost/com.apple.DotMacSync.0017f20 43020.plist</string>
<string>/Volumes/PERSONAL/Libraries/iPhoto Library/AlbumData.xml</string>
<string>/Volumes/PERSONAL/Libraries/iPhoto Library/ThemeCache</string>
<string>/Volumes/PERSONAL/Libraries/iPhoto Library/iPod Photo Cache</string>
<string>/Volumes/PERSONAL/Libraries/iPhoto Library/Data/iMovie Converted</string>
<string>/Users/michaelb/Library/Icons/WebpageIcons.db</string>
</array>
<key>ExcludedVolumes</key>
clip
END
I am not sure about the first list under "exclude by path". The Users/michaelb/ items are not things I have specified for exclusion. And I certainly didn't change any TM prefs after Oct 6th and today.

I need the calculation for one about apple bought software. how do I receive this?

I need the calculation for one about apple bought software. How do I receive this?
Thank you for your answer.

In iTunes,, go to the iTunes Store. Click on your account. Sign in and the details should be in the list in Purchase History.
Russ

HT4993 i need unlock iphone 4s , previously used for sprint about 2 years ago, out of contract now. would like to use it fro other carrier . Cant though before you HELP ME! PLEEEEEEEEEEEEEEAAAAAAAAAAAAAAASE

i need unlock iphone 4s , previously used for sprint about 2 years ago, out of contract now. would like to use it fro other carrier . Cant though before you HELP ME! PLEEEEEEEEEEEEEEAAAAAAAAAAAAAAASE

Contact Sprint. They are the only ones that can authorize an unlock. No one else can. If they refuse to unlock, there is nothing you can do but sell the device and get another phone.

New design for site - need feedback

I am still learning web design, and now that I know I little
more I decided to re-design my website. I need feedback from all of
you. Does this new design look better? What do you think needs to
be changed, added or removed?
Here is the current design:
http://northshoreclassifieds.com
Here is the new design:
http://northshoreclassifieds.com/new.htm
Thank you in advance.

On Sun, 24 Sep 2006 21:16:57 +0000 (UTC), "Salabinha"
<[email protected]> wrote:
>I am still learning web design, and now that I know I
little more I decided to
>re-design my website. I need feedback from all of you.
Does this new design
>look better? What do you think needs to be changed, added
or removed?
>
> Here is the current design:
http://northshoreclassifieds.com
> Here is the new design:
http://northshoreclassifieds.com/new.htm
>
> Thank you in advance.
Hi, I just now saw this post. it looks like you are trying
several
methods to center the table.
<body><div class="centered"></div>
<table width="760" align="center" cellpadding="0"
cellspacing="0">
(The rest of the table)
</body>
</html>
Either method works, you don't have to do it twice. :)
Your table is centered in IE 6 on XP Pro SP2, are you still
not seeing
it centered? Try emptying your cache.
You can ditch every single font tag; you're using CSS in the
head, so
just do this:
body {
background: #62758C;
margin: 0;
padding: 0;
text-align: center;
background-image: url(images/backgroundimage.gif);
font-family: Arial, Helvetica, sans-serif;
Everything is a "child" of the body, so you don't have to
have this in
your other style definitions unless you wanta different font
for some
style.
Hope this helps!

Smart paging Question , What happen if i don't enable smart paging and available Memory is about 1GB and the VM need 3GB for Booting ?

Hi ,
I configure a dynamic memory With 512 MB for a VM , and available memory 1GB
what happen when I boot the VM , While it actually need 3GB for booting - Note I don't configure Smart Paging ?
Thanks.

You won't be able to boot at all.
pagefile and dynamic memory only comes into play when you don't have enough memory on the host, to support the 'startup RAM' on the VM, and when the VM does a
reboot.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Need suggestion for ISE distributed deployment model in two different data centers along with public certificate for HTTPS

Hi Experts,
I am bit confused about ISE distributed deployment model .
I have two data centers one is DC & other one is as a DR I have requirement of guest access service implementation using CWA and get public certificate for HTTPS to avoid certificate error on client devices :
how do i deploy ISE persona for HA in this two data centers
After reading cisco doc , understood that we can have two PAN ( Primary in DC & Secondary in DR ) like wise for MnT (Monitoring will be as same as PAN ) however I can have 5 PSN running in secondary i.e. in DR ISE however I have confusion about HA for PSN .. since we have all PSN in secondary , it would not work for HA if it fails
Can anybody suggest me the best deployment solution for this scenario ?
Another doubt about public certificate :
Public Certificate: The ISE domain must be a registered or part of a registered domain name on the Internet. for that I need Domain name being used from customer .
Please do correct me if I am wrong about certificate understanding :
since Guest will be the outside users , we can not use certificate from internal CA , we need to get the certificate from service provider and install the same in both the ISE servers
Can anybody explain the procedure to opt the public certificate for HTTPS from service provider ? And how do i install it in both the ISE servers ?

Hi there. Let me try answering your questions:
PSN HA: The PSNs are not configured as "primary" or "secondary" inside your ISE deployment. They are just PSN nodes as far as ISE is concerned. Instead, inside your NADs (In your case WLCs) you can specify which PSN is primary, which one is secondary, etc. You can accomplish this by:
1. Defining all PSN nodes as AAA radius servers inside the WLC
2. Then under the SSID > AAA Servers Tab, you can list the AAA servers in the order that you prefer. As a result, the WLC will always use the first server listed until that server fails/gets reloaded, etc.
3. As a result, you can have one WLC or SSID prefer PSN server A (located in primary DC) while a second WLC or SSID prefer PSN server B (located in backup DC)
Last but not the least, you could also place PSNs behind a load balancer and that way the traffic would be equally distributed between multiple PSNs. However, the PSN nodes must be Layer 2 adjacent, which is probably not the case if they are located in two different Data Centers
Certificates: Yes, you would want to get a public certificate to service the guest portal. Getting a public/well known certificate would ensure that most devices out there would trust the CA that signed your ISE certificate. For instance, VeriSign, GoDaddy, Entrust are some of the ones out there that would work just fine. On the other hand, if you use a certificate that was signed by your internal CA, then things would be fine for your internal endpoints that trust your internal CA but for any outsiders (Guests, contractors, etc) that do not trust and do not know who your internal CA is would get a certificate error when being redirected to the ISE guest portal. This in general is only a "cosmetic" issue and if the users click "continue" and add your CA as a trusted authority, the guest page would load and the session would work. However, most users out there would not feel safe to proceed and you will most likely get a lot of calls to your helpdesk :)
I hope this helps!
Thank you for rating helpful posts!

Which licenses do I need for the Enterprise Portal from Dynamics AX R2 2012

Dear Community,
some time ago i heard about the Enterprise Portal, which requires a SharePoint 2013 and a Dynamics AX R2 2012 Server.
My company has a fully licensed SharePoint 2013 Enterprise Server and enough CALs. We also have a Dynamics AX 2009 Server running.
Now to my question: What licenses are needed to get a Enterprise Portal with Dynamics AX 2012?
Thanks for your responses.
Sincerely ShareBear9280

Hi ShareBear,
According to your description, my understanding is that you want to know which licenses needed for the Enterprise Portal from Dynamics AX 2012 R2.
There are 4 types of user CALs in Dynamics AX 2012 R2 - Enterprise, Functional, Task, and Self Serve. The number of CALs needed is related to who these users are and what they do.
More information, please refer to the link:
http://community.dynamics.com/ax/f/33/t/114710.aspx
For this issue, I recommend you can post your question to the forum for Microsoft Dynamics AX:
http://community.dynamics.com/ax/f/33.aspx .More experts will assist you, then you will get more information relation to Microsoft Dynamics AX.
Thank you for your understanding and support.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Doubts about BP number in SRM and SUS

Hello everyone,
I have some doubts about the BP number, especially for Vendors.
I am working with the implementation of SRM 5.0 with SUS in an extended classic scenario. We will use one server for SRM and other for SUS. We will use the self registration for vendor (in SUS). My questions are:
- Can I have the same BP number in SRM and SUS?? Or is it going to be different??
- When a vendor accesses at the site to make a self registration in SUS, the information is sent to SRM as prospect (by XI) and there the prospect is changed as vendor? After that, is it necessary to send something from SRM to SUS again? (to change the prospect to vendor)
- When is it necessary to replicate vendors from SRM to SUS??
Thanks
Ivá

Dear Ivan,
Here is answer to all your questions. Follow these steps for ROS configuration:
Pls note:
1. No need to have seperate clients for ROS and SUS. Create two clients for EBP and (SUS+ROS).
2. No need of XI to transfer new registered vendor from ROS to EBP
Steps to configure scenario:
1. Make entries in SPRO --> "Define backend system" on both clients.
    You will ahev specify logical systems of both the clients (ROS as well as EBP)
2. Create RFCs on both clients to communicate with each other
3. In ROS client create Service User for supplier registration service with roles:
    SAP_EC_BBP_CREATEUSER
    SAP_EC_BBP_CREATEVENDOR
    Grant u201CS_A.SCONu201D profile to the user.
4. Maintain service user in u201CLogon Datau201D tab of service : ros_self_reg in ROS client
5. Create Purchasing and vendor Organizational Structure in EBP client and maintain necessary
    attributes. create vendor org structure in ROS client
6. Create your ROS registration questionnaires and assign to product categories- in ROS client
7. To transfer suppliers from registration system to EBP/Bidding system, Supplier pre-screening has to be
    defined as supplier directory in SRM server - EBP client.
    Maintain your prescreen catalog in IMG --> Supplier Relationship Management u2192 SRM Server u2192
    Master Data u2192 Define External Web Services (Catalogs, Vendor Lists etc.)
8. Maintain this catalog Id in purchasing org structure under attribure "CAT" - in EBP client
9. Modify purchaser role in EBP client:
    Open node for u201CROS_PRESCREENu201D and maintain parameter "sap-client" and ROS client number
10.Maintain organizational data in make settings for business partner
Supplier Relationship Management -> Supplier Self-Services -> Master Data -> Make Settings for the Business Partners. This information is actually getting getting stored in table BBP_MARKETP_INFO.
11. Using manage Business partner node with purchasers login (BBPMAININT), newly registsred vendors are pulled from Pre-screen catalog and BP is created in EBP client. If you you have SUS scenario, ensure to maintain "portal vendor" role here.
I hope this clarifies all your doubts.
Pls reward points for helpful answers
Regards,
Prashant

Doubts about use of REPORTS_SERVERMAP with Forms11g HA

Hi,
I'm configuring a Linux 64bits Forms/Reports 11g HA environment, the point is that i have two nodes, each one with its Forms and Reports servers, let's say FormsA and ReportsA for the first node and FormsB and ReportsB for the seconde node.
i want FormsA to be able to call reports from ReportsB and FormsB to be able to call reports from ReportsA.
I've been reading about REPORT_SERVERMAP
http://docs.oracle.com/cd/E12839_01/bi.1111/b32121/pbr_conf003.htm#autoId5
But i have some doubts about its use:
1. I will not use a shared cluster file system or any way of cache solution, i will only have my rdf files on each node, and i'm wondering if just by configuring this parameter i will be able to get the effect mentioned above ??
2. The link provided says "Using RUN_REPORT_OBJECT. If the call specifies a Reports Server cluster name instead of a Reports Server name, the REPORTS_SERVERMAP environment variable must be set in the Oracle Forms Services default.env file"
In fact i'm using RUN_REPORT_OBJECT but
what is the Reports Server cluster name ?? and where do i find that name ??
3. Is this configuration well defined:
REPORTS_SERVERMAP=clusterReports:ReportsA;clusterReports:ReportsB
4. At forms applications when using RUN_REPORT_OBJECT, can i assume that the report server name will be the cluster name specified at the REPORTS_SERVERMAP ??
5. Which files should i modify rwservlet.properties or default.env ??
Hope you can help me :)
Regards
Carlos

Hi,
1. I will not use a shared cluster file system or any way of cache solution, i will only have my rdf files on each node, and i'm wondering if just by configuring this parameter i will be able to get the effect mentioned above ??
--> In such case what could go wrong is
Suppose Run_report_object executed jobs successfully to ReportsA
But web.show_document command for getjobid failed ( as ReportsA went down by this time)
--> You will not get the output shown ( though job was successful)
If shared cache was enabled, then Even if ReportsA is down, other cluster member ( say ReportsB)
will respond back to web.show_document.
Point 2,
--> Under HA is it highly recommended to use web.show_document ( a servlet call) to execute reports. This is to help use all HA features at the HTTP , Webcache or load balancer level.
However if there is migrated code or Run_report_object is must, then the recommendations as you see in the pointed document is must.
REPORTS_SERVERMAP setting needs to be configured in rwservlet.properties file and also in default.env Forms configuration file to map the Reports Server cluster name to the Reports Server running on the mid-tier where the Load Balancer forwarded the report request.
For example FormsA, ReportsA, cluster name say rep_cluster
default.env file
REPORTS_SERVERMAP=rep_cluster:ReportsA
Where "rep_cluster" is the Reports Server cluster name and "ReportsA" is the name of the Reports Server running on the same machine as FormsA
rwservlet.properties file
<reports_servermap>rep_cluster:ReportsA</reports_servermap>
At default.env this is not a valid entry
REPORTS_SERVERMAP=clusterReports:ReportsA;clusterReports:ReportsB
what is the Reports Server cluster name ?? and where do i find that name ??
--> This is created via EM on the report server side.
Would recommend to refer following documents at the myoracle support repository
How to Setup Reports HA (High Availability - Clusters) in Reports 11g [ID 853436.1]
REP-52251 and REP-56033 Errors When Calling Reports From Forms With RUN_REPORT_OBJECT Against a Reports Cluster in 11g. [ID 1074804.1]
Thanks

Needing feedback for doubts about my almost-a-week-old 2012 MBP

Similar Messages

Maybe you are looking for