Needs reports in SAP showing held PO's and past due PR's.

Is there a transaction in SAP to pull reports to check on below?
1. Past Due PRs (past due date)
2. ON HOLD PO (PO's which are still held)
Thanks.

Hi rakesh,
1. Past Due PRs (past due date)
Past Due Prs. ? plz define
2. ON HOLD PO (PO's which are still held)
run Tcode ME2n > Shift + F4 > Purchasing Document Header > Select Incomplete> Select yes >
Through the above selection you can see Hold Po's or faulty POs.
Regards,
Vraj

Similar Messages

I need the age to show in Years Months and Days

Post Author: LOgle0917
CA Forum: Formula
NumberVar DoBVar := IIF((100 * MONTH({CHARTING.CHARTINGDATE}) + DAY({CHARTING.CHARTINGDATE})<(100 * MONTH({DEMOGRAPHICS.BIRTHDATE})+ DAY({DEMOGRAPHICS.BIRTHDATE}))),1, 0);NumberVar MthVar := (DATEDIFF("m",{DEMOGRAPHICS.BIRTHDATE},{CHARTING.CHARTINGDATE}) - DobVar) MOD 12;NumberVar YrsVar := DATEDIFF("yyyy",{DEMOGRAPHICS.BIRTHDATE},{CHARTING.CHARTINGDATE}) - DobVar;StringVar MthYrs := TOTEXT(YrsVar,0) + " years " + TOTEXT(MthVar,0) + " months";
This returns Years and Months what do I need to add to it to return days?
Thanks!

Post Author: SKodidine
CA Forum: Formula
Here is a formula that I modified for CR from a Visual FoxPro function by Ramani Subramanian G.
Create a separate formula to replace your calculations for datediff and paste this replacing the values of fromdate and todate with {DEMOGRAPHICS.BIRTHDATE} and{CHARTING.CHARTINGDATE} respectively.
DATEVAR FROMDATE := DATE(2000,01,01);   // FROM DATE
DATEVAR TODATE   := CURRENTDATE;        // TO DATE
NUMBERVAR YEARS;
NUMBERVAR MONTHS;
NUMBERVAR DAYS;
STRINGVAR DIFF;
DATEVAR   TEMP;
IF TODATE < FROMDATE THEN
(TEMP     := TODATE;
TODATE   := FROMDATE;
FROMDATE := TEMP);
YEARS := DATEDIFF('YYYY',FROMDATE,TODATE);
IF YEARS > 2 THEN
(YEARS := YEARS - 2;
TEMP := DATE(DATEADD("M",YEARS * 12,FROMDATE));)
ELSE
(YEARS := 0;
TEMP := FROMDATE);
WHILE TRUE DO
(TEMP := DATE(DATEADD('M',1,TEMP));
IF TEMP > TODATE THEN
    EXIT WHILE;
MONTHS := MONTHS + 1);
DAYS := DATEDIFF('D',DATE(DATEADD('M',-1,TEMP)),TODATE);
IF MONTHS > 12 THEN
(YEARS := YEARS + INT(MONTHS/12);
MONTHS := MONTHS MOD 12);
DIFF := IIF(YEARS>0 ,TRIM(TOTEXT(YEARS,0)) & " YEARS " ,"0 YEARS ") &
        IIF(MONTHS>0,TRIM(TOTEXT(MONTHS,0))& " MONTHS ","0 MONTHS ")&
        IIF(DAYS>0 ,TRIM(TOTEXT(DAYS,0)) & " DAYS"   ,"0 DAYS");

I synced with new computer, lost apps. reinstalled but Office HD docs that we're not lost when I reinstalled will not cut and paste. Will I need to use only new documents to cut and paste?

I synced my IPad2 with a new computer and lost all apps. I reinstalled apps. When I reinstalled the Office2HD, all documents were still ther, but I am trying to cut and paste one and it is not allowing? Will I need to save new documents there for this function to work?

There are dozens of possibilities, Lisa.
Which C50-A do you have? There is a label on the bottom.
What security applications do you have installed? Webroot is a common offender.
Do you have Microsoft Office installed? If so, which version?
Do you use Bluetooth?
Did you upgrade to Windows 8.1 properly, following carefully the instructions here?
   How to Update from Windows 8 to Windows 8.1
Find a situation that always gives you trouble, so that know when we learn something.
Then see if that trouble occurs after a clean boot.
   1. Open the System Configuration utility (msconfig.exe). You can do that by typing msconfig at the Start screen and pressing Enter.
   2. On the Services tab, set the Hide all Microsoft services check box and then click Disable all.
   3. On the Startup tab, click Open Task Manager, right-click and disable each Startup item. Then close Task Manager.
   4. Back on the System Configuration screen, click OK, and restart the computer.
-Jerry

SSRS & Report Viewer control - Show the print button and fire print for multi page report in Mozilla & Chrome

I have reports in SSRS. I am using remote reports. Reports have multiple pages.
In IE, the print button displays, but in Firefox and Chrome, it does not display.
Below links shows how to display the print button for mozilla and chrome. These solutions only fire the print for the
current page in the report viewer-
http://stackoverflow.com/questions/951009/sql-reporting-services-print-button-not-shown-in-mozilla
http://stackoverflow.com/questions/4208457/ssrs-print-button-in-chrome-and-firefox
I need to be able to issue a print command for all
pages in one go from the reportviewer.

Hello,
The common workaround about print button on ReportViewer control for non-IE browsers is add ActiveX print control or create Print function. It has pros and cons.
I am not good at programming. But you can try to disable page breaks by setting InteractiveHeight to 0 so that the report will rendering in single page with Report Viewer control.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

NEED HELP - Text Messages showing up hours later and no more notifications

Up until about 3 weeks ago, I was very in love with my S3 as it worked perfectly. Then about 3 weeks ago (March 12 or so) I started receiving my text messages hours or days after they were sent. We then went to Canada for a week and I had no mobile data. The issue with my messaging continued, except now I rarely get a notification when I get them. I have been back a week and it has gotten worse. The messages seem to come all at one time once or twice a day, there is no notification when they come, and I am occasionally missing messages. It does not matter who the messages are from. I have rebooted the phone multiple times. I have tried using Handcent SMS instead of the default messaging application to no avail.
Is there something going on with Verizon Text messages?
Is there another place to go besides the following to set notifications?
Messaging
Menu
Settings
Notifications
Check everything, Default Ringtone, and Alert Once
Since this started before we went to Canada, I do not think that was the cause. Although, there were several times that I got the message Updating Sim Card information when we were there and I had the wrong time a lot of the time.
Please Help!!

So today I go to send a text and get one from last night. Don't get the sound but it did show up on my notification bar. I sent the text and realized my clock was off by an hour. I went into settings, Date/Time and both are set to Automatic, but for some reason it is showing Central Time Zone. I uncheck Automatic Time Zone and set it to Mountain Time Zone, exit Settings, and perform a Shut-Down. Pull the battery, Sim Card, and SD Card and reboot the phone. Go back into Date/Time and reset it Automatic. This time it stays in the Mountain Time Zone.
Could I possibly need a new Sim Card?
Please Help. I really do not have time to go wait in line for an hour at the Verizon store for them to tell me that they will have to look into it and then not get back to me for a few weeks, if at all.
Thank you.

Need help on sap web ui component BT115H_SLSO and BT115IT_SLSO

Hi ,
I have enhanced compoent BT115H_SLSO , overview view(BT115H_SLSO/SOHOverView ) and redefined method EH_ONSAVE. In the sales order overview screen (BT115H_SLSO/SOHOverView ) items assignment block level i added one check box . When the user saving the data popup is raising and user clicks ,for example say "YES", then the check box should select from the items .How to update the check box in the bol .I am not able to get BTAdminI from the item component BT115IT_SLSO .
I have tried to get the BTAdminI from compoent conteroller of BT115H_SLSO ,but it is initial(I observed in the debugging).
Please help me how to write the logic form different compoenents.
Thanks,
Venky

Hi,
Use the following relations to gett the BtadminI object from BtOrder.
Btorder->BTOredrHeader->BtHeaderItemsExt->BtOrderItemsAll.
After gettign Btorder,you have to call emthod get_related_entities( iv_relation_name = 'BtOrderHeader' ).
This will retrun a collection of Bol entities.Get the current entity from this collection and again call the same method but use the next relation this time ie BtHeaderItemsExt,and so on,
The entity that you get after the last relation i s the collection of BtadminI entities.
Please check the exact relation names from BOL model browser.Use the same hierarchy of relation to goto the correct object.
Suvidha

SAP not allowing to copy and paste from word documents

Hi gurus,
I am having the issue with the outbound Faxes from SAP. It fails with error code 816 saying
"Message cannot be transferred to node AVENTX due to connection error (final)"
I checked SM59 and it works fine. The configuration of the Fax Node looks good, Address Area "*"
And when I go to SOST and "Repeat Send" then it goes thru? Not sure what is that I am missing.
Any help would be highly appreciated.
Thanks
JS

DUPLICATE THREAD ([Error Code 816 in SOST|https://forums.sdn.sap.com/click.jspa?searchID=20921052&messageID=6852586])

My iPad wont let me open the app Ghostwriter and I need it because I have essays on it and their due tomorrow help please?

Please somebody help me.

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe

Budget report in sap CO

Dear Expert,
I need report that can show this information :
cost element, cost center, description, proposed budget in year xxxx, approved budget in year xxxx.
Is there any SAP standard report which suitable with this requirement?
Thank you.

Hi,
Do you refer to budget or to planning? Anyway, the concept of 'approved/proposed budget' does not exist in CO in these terms. I presume, you are using several versions for planning. You will have to build such a report yourself (via ReportPainter - GRR1).
Regards,
Eli

Vendor wise Sales & Stock Report in SAP Retail

Hi,
My requirement is:
I need to develop a report for suppliers, showing them the sales and stock in each sales office. The report will be able to show the quantity in sales and stock for each sales office and a total for each one, in a determinated period for the given supplier.
Can anyone please suggest a step by step process to extract the data, I will get vendor number/s from selection screen and the date range based on which I need to extract the data?
Is it posible to determine the vendor of a material from the sales order, I have multiple vendors for a material? Can anyone please explain me how to determine the vendor of a sold material?
Thanks in advance
Kumar..

Hi,
If you populate batches, try to populate an infostructure (LIS) for movements 101 (for purchase orders) where you have the article (material in IS-R), plant and vendor code. Other question is the STO from distributions center to shops. Of course, you need that the batch will be different for different vendors. It's an idea.
I hope this helps you
Regards,
Eduardo

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

Extracting a Report from SAP Spool into a Useful Excel 2010 Format

Hi All,
Extracting a Report from SAP Spool into a Useful Excel 2010 Format. I'm currently running the following report in SAP and would like the
ability to set this report up as a recurring report running weekly and
subsequently access this report in a useable Excel 2010 format without
much data manipulation. Can you please assist me. Below, I've tried to
provide an example of what I'm encountering. Thanks, beforehand for
your assistance.
Here goes:
Step one: Run 62 Report in SAP S_P99_41000062- Material List Price and
Inventory
Step 2. Select stored Variant "Weekly KPI", ok. Enter the enter the
desired company code and period I want thre report to run for and update
the currency, if necessary. Having input my desired criteria, I believe
I can either execute immediately, run in the background, preset to run
at date in the future. For this example let's just execute, immediately.
This is where the difference originates. Given, I run this report
immediately, I'm able to simply extract the result to Excel via the list
selection noted in the tool bar below. The result is a data friendly
excel 2007 report is automatically generated.
Export to Excel via list:
Select save and Excel 2007 opens automatically:
That said, the method outlined above works perfectly fine if you want
the report immediately. Now let go back and run the exact same report
with exceptoin of running it in the background and having to retrieve it
from the Spool (SP01) uisng my user ID. Given the report generated in
the background, I would now access the report via the spool and make
the following selections:
SP01 + execute to see my report
I would hit the sunglasses to see the actual report, then want to
extract this report to Excel by selecting the export option.
I would at this point select spreadsheet and be given an option to save
the spreadsheet to local file. However, upon trying to open the
spreadsheet I will receive an error messageindicating that the format is
different than that which the file I am currently trying to open it
with. I'm currently running Excel 2010 on my computer. The currency
format and other issues arrise with this extract. Please help.
Thanks,
Chowadary.

Update to Latest GUI.
Use List -> Export -> Spreadsheet to get the output to excel.
I remember in ALV max length allowed is 1023 characters and the max no of columns supported is 90. Issue occurs when row size of exported data gets more than 1023 character. (This includes if Long/Medium Header Text used ) If it exceed 1023 character the columns splits and moves to next row.
Check your fieldcatog for header lengths.
-Satya

Crystal reports over SAP r/3 tables

I am trying to write a Crystal report over SAP r/3 tables (BSIK and LFA1) with no success.
I have CRpts installed along with the "client side" SAP integration kit. When i try to create a new connection to my development ERP system i am asked to select an available system, but the dialogue box is empty. I can however connect to a SAP BW query successfully using the SAP toolbar that has been added when installing the integration kit.
Is there anywhere a set if instructions to successfully install and configure CRpts to report over SAP r/3 tables ?
Andrew Fox

Make sure to define an environment variable called SAPLOGON_INI_FILE in the system your CR designer is installed on. The variable should contain the path to your SAPlogon.ini file including the file name. eg if saplogon.ini is found under c:\Windows then the variable shoud be set to c:\Windows\saplogon.ini . Restart the CR designer and try again.
If the system list remains empty then locate to saplogon.ini file, open it using Notepad and choose the Save as option. All you have to do is to overwrite the existing file (ie. do not change the name) after changing the encoding to UTF-8 (drop-down list at the bottom of the Save as window)
Regards,
Stratos

Problem when trying to print standart invoice crystal report for SAP

Hi All, I have the following problem when trying to print a system invoice report in crystal reports for SAP
I pass params and load the report using this code
Private Sub DisplayThreadReportSeq()
Dim oView As New frmViewReport
Dim strReportPath As String = ""
Dim strParamName As String = ""
Try
Dim CR As New ReportDocument
CR.Load(oReport.CrstPath)
' Declare the parameter related objects.
SetReportValues(CR)
Dim crParameterDiscreteValue As ParameterDiscreteValue
Dim crParameterFieldDefinitions As ParameterFieldDefinitions
Dim crParameterFieldLocation As ParameterFieldDefinition
Dim crParameterValues As ParameterValues
' Get the report's parameters collection.
For Each oPar As cslParam In oReport.Params
crParameterFieldDefinitions = CR.DataDefinition.ParameterFields
crParameterFieldLocation = crParameterFieldDefinitions.Item(oPar.ParName)
crParameterValues = crParameterFieldLocation.CurrentValues
crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
crParameterDiscreteValue.Value = oPar.Value
crParameterValues.Add(crParameterDiscreteValue)
crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
Next
If pPrint Then
If oReport.Printer "" Then
CR.PrintOptions.PrinterName = oReport.Printer
End If
CR.PrintToPrinter(IIf(oReport.Copies = "", 1, oReport.Copies), False, 0, 0)
SBO_Application.StatusBar.SetText("Printed Document Successfully", SAPbouiCOM.BoMessageTime.bmt_Medium, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
Else
oView.Text = pReport
oView.TopMost = True
oView.Viewer.ReportSource = CR
oView.Hide()
oView.ShowDialog()
End If
Catch ex As Exception
Util_GenErrorLog("DisplayReport", ex)
End Try
End Sub
This code works fine when the report invoke to print is developed in crystal reports version for .net 2008 or .net 2005
when trying to print a report standart getting from SAP BO 8.8.1 using this code I getting the following error:
Error in File C:UsersecombaAppDataLocalTemp5ARInvoiceStandartSap {300B9A68-DF05-4D7B-8F3B-1670A4493BEE}.rpt:
Error in formula .
'Shared numberVar SectionTotalMaxHeght;
A number, currency amount, boolean, date, time, date-time, or string is expected here.
This report is the standart report that SAP 8.8.1 includes and works fine on SAP.
I referenced this dlls CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.CrystalReports.Shared, version 10.2.3600
How I can get these dll´s version for Crystal Report 2008 for SAP Business one or How I can solve this problem
thanks in advance,
Ezequiel.

Hi Ezequiel,
You can try to search in SAP Business One Reporting & Printing forum section or post there.
nd.Q

Report builder is showing output for many receipt numbers and pdf doesn't

Dear all
a report in report bulider is showing result for one and more than one receipt numbers, but when the same parameters are given for more than one receipt number it does not work in pdf. The error is coming as the file is damaged and could not be repaired. i have e-business suite 11i.
Regards
Arifuddin
Edited by: user11309801 on Apr 15, 2011 11:38 PM
Edited by: user11309801 on Apr 15, 2011 11:40 PM
Edited by: user11309801 on Apr 15, 2011 11:46 PM

group 1: 19.5
group 2: 148.4
actual Grand Total: 347.48
Then there are at least 3 groups. You don't say. So, how many
groups are there altogether?

Needs reports in SAP showing held PO's and past due PR's.

Similar Messages

Maybe you are looking for