SSRS & Report Viewer control - Show the print button and fire print for multi page report in Mozilla & Chrome

I have reports in SSRS. I am using remote reports. Reports have multiple pages.
In IE, the print button displays, but in Firefox and Chrome, it does not display.
Below links shows how to display the print button for mozilla and chrome. These solutions only fire the print for the
current page in the report viewer-
http://stackoverflow.com/questions/951009/sql-reporting-services-print-button-not-shown-in-mozilla
http://stackoverflow.com/questions/4208457/ssrs-print-button-in-chrome-and-firefox
I need to be able to issue a print command for all
pages in one go from the reportviewer.

Hello,
The common workaround about print button on ReportViewer control for non-IE browsers is add ActiveX print control or create Print function. It has pros and cons.
I am not good at programming. But you can try to disable page breaks by setting InteractiveHeight to 0 so that the report will rendering in single page with Report Viewer control.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Similar Messages

I hit the power button and it runs for a second then turns off but the power buttton stays lit

i hit the power button and it runs for a second then turns off but the power buttton stays lit

What machine?
Mac Pro? Mac Pro what?
If Mac Pro, wrong forum. Go here:
Mac Pro

Problem in crystal report viewer control's toolbar "export"button using SSL

Hi,
I would like to ask. My project is using BO XI Release 2 and VS-Studio 2005. Initially my project doesn't use SSL... At that time when i view the report with crystal report viewer control and can export (using built-in toolbar "export button"). Now project is using SSL and canu2019t export the error is
u201CInternet Explorer cannot download file from server.
Internet Explorer was not able to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later.u201D
Actually this error can solve "Cache-control" change to "no-cache". But I donu2019t know in crystal reportu2026
Anyone can help ???
Thanks

In Internet Explorer, go to Tools -> Internet Options -> Advanced and ensure "Do not save encrypted pages to disk" is unchecked.
Default is to have that option checked.
It was considered a IE security issue that IE saves all content to temp disk location unencrypted, even those pages served by HTTPS (for example, let's say you use HTTPS to download your bank info, and it's stored to temp disk for someone else to retrieve later). So more recent versions of IE implemented that option setting.
How that option setting works is strange - it downloads the file, saves to disk, then deletes the copy from the disk immediately, before passing it to the application responsible for the MIME type. So the application tries to open a directory path to a non-existing file.
Issue is specific to IE, and it's not something you can control via the SDK.
Sincerely,
Ted Ueda

The itunes store wont let me download anything i click the buy button and it asks for my password but it wont download

when i went to itunes on my computer it would start downloading the apps i purchased on my phone but would get stuck a processing file, then when i went to purchase a movie i would click the buy button and it would ask my password but then would not purchase or download. So i decided to buy the movie from my phone and then try to download on my computer from the purchased section but still wont download on my computer and it doesnt give me a reason why

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Are you putting in the address where the bank sends the monthly statement?
Apple's servers are very picky about the format of the address. If you live in the USA, then the server is expecting the style that the US Postal Service uses. One way to do this is to use the USPS ZIP Code lookup service;
https://tools.usps.com/go/ZipLookupAction!input.action
Enter the address to look up the ZIP code and then copy the exact USPS output into your iTunes account information.

Illustrated book exported as epub shows the number "4" (1 each chapter) for 56 pages

I'm using ID 5.0 and have an illustrated children's book with each page consisting of a jpg file. I've converted it to epub (to eventually also convert to MOBI) and everything looks great except for a pesky problem.
When I proof the book in Adobe Digital Editions, everything looks great - I see the chapter names on the left side of the ADE browser (yay), and can scroll through each page fine, but only see at the top the number 4, (next to the printer icon on the top of the ADE page). I have 4 chapters, yes, but I have something like 56 pages total within all of these chapters. Since this is a kid's book that's somewhat educational, I think it might prove to be confusing that there are only 4 pages acknowledged.
I don't need to see page numbers on the actual document (did that already in Photoshop and it's part of the overall jpg file) but is there a way to change the top number that ADE sees so that it acknowledges that there are 56 pages? Or even 5 pages in chapter 1, 22 pages in chapter 2, and so on?
Thanks in advance.

ADE is hardly the app to be doing this with but if you are, make sure you’re using 1.8 preview and not the release version.
Bob

Showing the amper sign and greater than sign in a report

Hi All,
I am saving html code to the table and it saves exactly as I save it but when I display it I need to replace certain characters with other values so it shows as it was saved.
<code>
select replace(replace(replace(ACTION,'>','>'),'<','<'),chr(10),'<BR>') "Action"
from test_table1
</code>
Example:
the greater than sign I replace with an amper sign, gt;
the less than sign I replace with an amper sign, lt;
the chr(10) I replace with a BR tag.
If I save the "amper sign, gt;" to the database what do I use to have it show an " amper sign, gt;" in my report column?
Bill

Bill,
How about using the package
DBMS_XMLGEN.convert(<<value>>, 0)
when retreiving from the table and
DBMS_XMLGEN.convert(<<value>>, 1)
when saving to the database.
This package will take care of all of your special characters.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Fonts are not diplayed correctly in the Crystal Report Viewer control

Post Author: Farid
CA Forum: General
Hello,
I have designed a report in the Crystal Reports XI Designer (version 11.5.3.417) using the default printer. When I view it through the preview mode of the Designer, fonts are displayed like expected using the default printer driver.
Now, I view this same report at run time in the Crystal Report Viewer control on the same computer with the same default printer. Fonts appear then differently they were in the preview mode : sizes are differents and some texts are truncated. It seems that the default printer driver are not used.
Can anybody tell me if this behaviour is normal ? If it is the case how should I do to display a report in the Report Viewer using the default printer driver like I have specified it in the Designer.

Post Author: V361
CA Forum: General
You may want to select the "no Printer" option instead, this will force CR to use a higher resolution. Look in page setup, printer options.

Crystal Report Viewer Control on SAP Form?

We are using Crystal Report XI to create custom SAP reports. We have integrated this into our Add-On by adding the Report Viewer Control to a Windows form and setting it's report source at runtime. This works ok but is a bit cludgy looking and causes some focus and redraw problems with SAP. I have tried for weeks to figure out how to get the ActiveX control onto an SAP form but with no luck.
Here is my code sample:
SAPbouiCOM.Item oItemX;
SAPbouiCOM.ActiveX oActX;
CrystalDecisions.Windows.Forms.CrystalReportViewer oCRX;
oItemX = this.sboForm.Items.Add("U_CRCtl", SAPbouiCOM.BoFormItemTypes.it_ACTIVE_X);
oItemX.Left = 0;
oItemX.Top = 0;
oItemX.Height = this.sboForm.Height;
oItemX.Width = this.sboForm.Width;
oActX = (SAPbouiCOM.ActiveX) oItemX.Specific;
oActX.ClassID = "{5E093535-5A5D-4E72-ACCD-F10B6D065BC9}";
oCRX = (CrystalDecisions.Windows.Forms.CrystalReportViewer) oActX.Object;
oCRX.ReportSource = @"c:\Test\Test.rpt";
I am not sure why this will not work. I always get either 'Specified cast is not valid' or 'Invalid Class ID'. If anyone has done this successfully or has any suggestions that would be great! Thanks for your help!
David

Hi Ibai,
Thank you for your interest in CrystalWave. I tried sending this info to the email address you gave but got an undeliverable message.
The links are as follows:
(please use Internet Explorer while accessing the download link)
1. CrystalWave info: http://www.twbs.com/CrystalWave.html
2. CrystalWave download: http://www.twbs.com/cwrfiv2004.asp (You need to fill in your info and the download will start.)
Please do let me know if you are not able to access these links and I can setup a temporary link for you to download the program.
Thanks,
Gopal Viswanathan

CR2010 Report Viewer control crashes application when deployed

I have been using the latest release for CR2010, on a Win 7 x64 machine running VS2010 targeting .Net Framework V4, and all is working fine.
However, when I publish my WPF application as an x86 client and deploy to a WinXP machine, the Report Viewer control crashes the application.
Any clues out there?

Yes there is not much to go on. As I described, the symptom is a crashed application - nothing else I can tell you. When you select a report to load into the Report Viewer control - down it goes with nothing more than a "send this dump to microsoft" message.
I do have some further enlightenment however. I can deploy the application to the standalone machine straight out of the Release bin and it works fine. Given that is the case I can rule out the CR2010 run time install as the issue. What I suspect is the problem is that the individual report files (.rpt and .cs) are not being packaged by the VS2010 publisher.
There may be a way to do this, but I do not know of it at this point in time, so I have marked this problem as having been solved, but I would like to know if anyone has a solution to the deployment of CR files using VS Publish.
Thanks

Report Viewer control disabled in aspx page

Hi All,
I am trying to generate a report with data pulled from one of a SharePoint list and binding it to report viewer control. The binding happens fine through code. Page is actually a layout based and deployed to one of folder in layouts and in the
same folder the rdlc file resides. But when the aspx page is opened in SharePoint site, the report viewer control appears as disabled. We are using visual studio 2012 and SharePoint 2013 setup to generate the report. Does anyone have idea how to fix this
issue
Regards RCP

You can get the report viewer disabled if scripts aren't enabled.
Check your browser settings.
I should imagine if the correct scripts aren't served with the control for whatever reason then the same problem could occur.
You might want to consider posting the question on the sharepoint forum. I know configuring SharePoint is notoriously tricky and that might be your issue here.
But I don't do sharepoint.

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

Differences between Report Viewer Version 9.0.0.0 and Version 10.0.0.0?

Hi,
What are the differences between the Report viewer control (web forms) version 9 and version 10?
Thanks
nasayoo

Hi nasayoo,
The report viewer control (available for Windows Forms as well as ASP.NET applications) is used to display reports in our applications. However, ReportViewer control can connect to specific SQL server versions when used in Server Mode(or Remote Mode). The
related MSDN docs for report viewer control that verify this behavior can be viewed at
Here is the details(version 9.0.0.0, with VS2008, for SQL server 2005+) andHere is the details(version 10.0.0.0 with VS2010, for SQL server
version 2008+).
Details information in this article for your reference:
http://smehrozalam.wordpress.com/2010/08/11/reportviewer-control-look-out-for-appropriate-version-when-using-in-server-mode-remote-processing/
http://www.wenda.io/questions/2005944/asp-net-ssrs-report-viewer-9-0-and-report-viewer-10-0-side-by-side.html
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Care button and finger print reader for 3000 N200 not working

I have bought Lenovo 3000 N200 model. THe Care button and finger print reader not working. I have loaded the hot key driver as well as finger print reader driver. I have XP OS on my notebook. The software for finger print reader for XP (64 bit) which is there in the lenovo site is not getting loaded.
Kinldly help.

Hi @Sean-Ireland
Welcome to the HP Support Forums! I saw your post regarding the problems with your fingerprint reader not working. I will be happy to help you with this. Start by installing both your Validity Fingerprint Sensor Driver and the Digital Persona Fingerprint Reader Software. Let me know how it goes.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

SSRS reports are not fitting properly in Report Viewer Control

Hi All,
We are using Report Viewer Control to render SSRS reports & show it on SharePoint web page. In .aspx page we are putting Report Viewer Control as follows:
The zoom percent of Report we are getting from Report Server is 100%. We are making it as 50% to show it on our page. On one page, we are showing 2 reports.
<rsweb:ReportViewer ID="rpv2Chart1" runat="server" Font-Names="Verdana" Font-Size="8pt" ProcessingMode="Remote" Height="211px" Width="813px" ZoomPercent="50"></rsweb:ReportViewer >
The reports are coming. But the reports which we are getting inside the control are not readable & 25% of Report Viewer Control on our right hand side is blank.
As you can see it's not readable. For readability we want to use that white space also & want to utilize full controls's space. But if we try to increase percentage from our report viewer tag, then the graph is zooming in with both, height & width
so it's going out of control.
Client don't want scroll bars on Report Viewer control. We just want to utilize the entire Report Viewer Control space.
Can anyone suggest us how to do that?
Thanks,
Sanjay

Hi Sanjay,
I'm afraid that it is not the correct forum for this issue.
If it is the SSRS issue, you could post this issue here:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
If it is the VS report control issue, maybe you would get better response here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SSRS web based report viewer control rendering issues - text getting clipped chopped off

Hi,
I am using web based SSRS report viewer control to display SSRS reports in browsers like Chrome, FF, IE, Safari etc. My issue is some text is getting chopped off (clipped) in all cells of some reports. I investigated on my end by analyzing generated HTML
and I could see a problem in the HTML that report viewer control is generating. But I am afraid to apply any HTML or Javascript hacks at the moment considering we have hundreds of reports.
You can see in above image how text got chopped off. The problem in HTML (given below) is the text has been wrapped in a div tag with a fixed height. If I remove the height and also padding on parent TD, the text appears properly.
<td class="A23dfe7c5f99245f2a0db522a22a6035597c" style="HEIGHT:5.00mm;background-color:#d3d3d3;"><div style="HEIGHT:3.24mm;overflow:hidden;"><table lang="en-US" cellspacing="0"
cellpadding="0" border="0" class="Pd9776e5f7eaf4df696265b8b49d1da39_1_r17"><tbody><tr><td class="A23dfe7c5f99245f2a0db522a22a6035597" style="word-wrap:break-word;white-space:pre-wrap;">MyType11</td></tr></tbody></table></div></td>
Please let me know if you have faced a similar scenario before.
Here is link to stackoverflow thread -
Stackoverflow thread
Regards
Murtaza

Hi Murtaza,
According to your description, when you display the report with Report Viewer control, the data within the text is cutoff.
Based on my research, the issue could cause by that Arial Unicode MS font hasn’t been installed on the server where Reporting Services run. Besides, when we use ReportViewer control to render report, we’d better set
AsyncRendering="true" in the Report Viewer control. Also please run the IE with compatibility mode. For more information, please refer to similar threads below:
Data in column getting cut-off in report viewer control
SSRS Rendering Issues
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

SSRS & Report Viewer control - Show the print button and fire print for multi page report in Mozilla & Chrome

Similar Messages

Maybe you are looking for