Negative feedback control needed for gas flow controller

I'm an engineering student, and we're working on a design project that requires steady oxygen and nitrogen flow. We're using flow controllers to maintain a constant pressure. I need a LabVIEW VI that will sample the pressure at certain intervals and then, if there are variations, return the value to the desired pressure. I don't know that much about LabVIEW, so does anyone have suggestions on how I could do this? I don't need DAQ help now because that will be added later. Just suggestions on how to keep the value constant. Thanks!

a PID control loop should do it
There is a pid example that ships with LabVIEW. Search the LabVIEW examples for PID.

Similar Messages

  • Help needed for SD Flow

    Hi all,
    I am new to SAP & I like to learn the SD flow,  basically i am a abap developer(I am not from MBA background so i dont know any business related information).  Is it possible for me to learn SD flow.
    Because if i know the SD flow then i can easily do coding according to the business perspective. 
    Can anyone help me on this???  What are the things i should do to learn SD flow.
    Thanks n advance,
    Vichu

    Hi,
    MBA is not necessary to understand the business process.To learn SD just we have to understand the sales process first.
    This is the main part in SD.And many other modules are also linked in this such as MM,FI etc..
    The SD process starts with Inquiry.
    With reference to that inquiry,we are going to create the quotation.
    Next thing is creation of sales order,Delivery,Picking and packing(optional),PGI and billing.This whole process is part of SD.Next step is paying that amount.This is related to FI.But we are going to do this process.
    First we have to create a customer by using the T.Code "XD01".Prior to this we should be aware of the organisational structure.It is the very basic point in SD.It includes creation of company code,sales organisation and sales area etc...
    While creating the custoemr we have to create in our company code and sales area.I hope you are aware that sales area is nothing but the combination of sales organisation/distribution channel and division.
    Next primary step is to create a material master.For all these which fields have to be enabled and which are not are going to be customized.
    Coming to sales order,this order type is defined by using the T.Code "VOV8" and creation is done by using "Va01" T.Code.
    Here order type is the most important element.We can create our own order type.
    Next thing is for providing authorisation for different T.Codes,we need help from our Basis people and ABAPer will help us to meet our business requirements if standard settings are not available.
    My suggestion is first start with Organisation structure and try to understand that part.Later move to order and delivery.
    First try to understand these concepts.
    I am going to suggest you a good book to learn SD.That is "Glynn C Williams".
    Pls go through these concepts.You will get some idea.This book is written in very simple terms.You will understand very easily.
    Later know some concepts of Billing and payment.
    Regards,
    Krishna.

  • Parent Controls needed for video and tv shows in Itunes

    I would like to know why Apple didn't have any thoughts to
    include video and tv in the parent control area. As a result
    we do not allow our children to use the music store anymore.
    What choice do we have? Either cut it all off or allow content
    that we feel is inappropriate to enter our home.
    It would certainly make parents who buy the computers, gadgets etc. to feel that Apple is looking out for their interests.
    It would be easy enough to come up with controls certainly like AOL, that would restrict the children to age appropriate
    tv and videos, or be able to not have them available at all.

    You could use the 'Restrict explicit music' option. This also has effect on video's labeled as explicit (just tried it out).
    Hope this helps.
    M

  • Gas flow Control

    Hi,
    I am just starting to write a program for Gas flow Control but I am unable to do it. Because I am new in Labview. Could you tell me how can I get a sample labview file for gas flow control.
    I am waiting for that. I want to learn labview myself. Pls help me to send this file. 

    Gas Flow Control wrote:
    Hi,
    I am just starting to write a program for Gas flow Control but I am unable to do it. Because I am new in Labview. Could you tell me how can I get a sample labview file for gas flow control.
    I am waiting for that. I want to learn labview myself. Pls help me to send this file. 
    You are going to have to work a little more than that if you want a solution. For the most part, we a voluteers here to help YOU write your code. We don't just write code on demand.
    So to get this moving please start by explaining what type of hardware you are using to control the gas and any other info that will help us advise YOU.
    A simple non-LV solution would be "Just plumb your gas to a Brooks MFC and cable it to a a 154e and you are done." But that will not help you if the gas you are controlling flows through a pipe the size of a tunnel portal.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Satellite Pro A200-1MI - Need driver for PCI memory controller

    I have the Toshiba Satellite Pro A200-1MI(PSAE7E) having a problem with PCI Memory Controller on my notebook.
    When I go to Device Manager it shows question mark in the tab Other Devices and when I go there, it's yellow ?(question mark) and !(exlamation mark) at PCI Memory Controller. I took and downloaded all the drivers from your site:
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
    for XP but I am not sure what type of drivers do I have to install for PCI Memory Controller, is it bios driver or something else? I just need to know what to install to overcome that problem with my Device Manager and PCI Memory Controller.
    Thanks in advance!

    Hello akibono
    I presume you have installed clean WXP on your notebook and now you want to install all drivers, tools and utilities. Am I right about that?
    Anyway, after WXP installation you must install all drivers, tools and utilities in specific installations order. After doing this everything should be OK and every hardware component will be properly configured.
    Please install all stuff as follow:
    WXP
    Chipset driver
    Display driver
    Sound driver
    Modem driver
    Storage manager
    LAN driver
    Touchpad driver
    WLAN driver
    Toshiba Assist
    Flash Media driver
    Webcam driver
    Hardware setup
    Controls
    And so on
    I hope everything will be OK.

  • Producing a voltage that coresponds to a setpoint for a mass flow controller​.

    Hello,
    I have a mass flow controller that requires a voltage output signal from my DAQmx board (SCB-68) to maintain a setpoint.  This set point is a voltage that corresponds to the desired flow rate.  I have produced a scale for this linear controller but I do not know how to use it.
    I know how to create a vi that reads a voltage input, I can also write one that sends the same voltage input back throught the output.  I can not write one that sends a constant voltage output corresponding to a flow rate.
    Could somebody help me out with this?
    Dan

    Hello,
    First, tp upload code (or any document) it is quite easy, just select the file, by clicking the "browse" button... see image below (I'm sorry it's all in french... 'cause I am french ! "Parcourir" means more or less "Browse" ) :
    About your app, well adding a channel doesn't require to duplicate the whole code... Developper are always trying to do things with the less code possible . Check VI attached and tell me if it matches your needs.
    Message Edité par TiTou le 03-23-200601:26 PM
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
    Attachments:
    Gen 2 Volt.vi ‏98 KB
    Clipboard01.png ‏14 KB

  • Software needed for the USB device, "USB Interface Controller TEST2.0"

    My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
    I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
    Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
    "Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
    I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
    "Software Update is not able to connect to the Internet. Please check your configuration and try again."
    I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

    Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
    From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
    In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
    I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
    Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

  • I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC

    Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC
    It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it doesn't find anything.
    Thanks in advance
    This question was solved.
    View Solution.

    Hi:
    Try this Intel chipset driver...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng
    If the auto install file doesn't work, download and unzip the second file listed (zip file).
    Go to the device manager and click on the smbus controller needing drivers, click on the driver tab.  Click on Update Driver.
    Select the Browse my computer for driver software option and browse to the driver folder that was created when you unzipped the file.
    Make sure the Include Subfolders box is checked and see if the driver installs that way.
    For the mouse pointer problem try reinstalling the touchpad drivers.

  • What is needed for sorting on two fields in a table control

    Hi Everybody
    I am going to certification in a couple of days. I need some help and was hopeing that you  guys could help.
    What is needed for sorting on two fields in a table control?
         One sorted table and two processing blocks
         Two standard tables and one processing blocks
         Two standard tables and two processing
    Which one is corret??
    //Script

    Hi Kimallan
    I am not sure what is meant by a "processing block". However, it seems the question wants the original table order to be preserved. If so; as far as I understood the problem we need:
    itab_proxy[] = itab_main[] .
    "two standard tables"
    SORT itab_proxy BY field1 field2 .
    If we have a sorted table, then it is always sorted by its keys. So, the question seems to become obsolete for that option.
    Hope I've understood correct...
    Regards
    *--Serdar
    [email protected]

  • Need an example for work flow based on multistep activity

    hi,
    i need an example for work flow based on multistep activity for practicing.please do the need.
    thanks

    Hi,
    Workflow document information:
    Check these links.
    http://www.sapgenie.com/workflow/index.htm
    /people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
    http://help.sap.com/saphelp_nw04/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
    http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
    http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
    http://www.sap-press.com/product.cfm?account=&product=H950
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
    http://www.workflowing.com/id18.htm
    http://www.e-workflow.org/
    http://www.sap-img.com/workflow/sap-workflow.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
    http://www.sap-img.com/workflow/sap-workflow.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
    &**********Reward points if helpful**************&

  • Need an apple link to download icloud control panel for vista.

    Need icloud control panel for vista.    

    There is no iCloud for Vista as it's to old.
    Windows 7 or 8 only.

  • I need to design fuzzy controller with pid control .

    hi ,
    I need to design fuzzy controller with pid control . to control   Dc servo motor i have NI DAQ PCI 6251 anyone help me??

    ssaara,
    Along with the shipping examples, here is a link to the PID Control Toolkit User Manual. Fuzzy Logic control is discussed in Part II of the manual, Chapters 5 and 8 are good starting points.
    --Michelle
    Instrument Control R&D
    National Instruments
    Instrument Control
    Machine Vision

  • What rights are needed for remote control

    I have a user that I want to allow remote control rights for a group of
    classroom PC's. What rights do I need to give her and where do I apply
    them? I have read TIDS that tell me I have to give rights at each
    workstation object which I find hard to believe as its so time consuming!
    Thanks in advance
    Hazel

    > On Thu, 27 Jan 2005 19:38:56 GMT, [email protected] wrote:
    >
    > > I have read TIDS that tell me I have to give rights at each
    > > workstation object which I find hard to believe as its so time
    consuming!
    >
    > depends.. if you have not eDir that's the case..
    >
    > but take a look at tools zenworks remote operators... which will help
    you a
    > lot in this case...
    > --
    >
    > Marcus Breiden
    I have edirectory and imported workstations etc .. running zen 4.1 .. I
    just cant seem to figure out how to give this user rights to remote
    control only one classroom.
    Hazel
    >
    > Please change -- to - to mail me.
    > The content of this mail is my private and personal opinion.
    > http://www.edu-magic.net

  • Satellite A100 - need driver for Mass Storage Controller

    Needed to use the recovery disc and now can not find driver for "Mass Storage Controller".
    according to device manager :
    Device Type : Other devices
    Manufacturer : Unknown
    Location : PCI bus 7, device 6, function 2
    suggestions, advise requested

    Your description is incomplete.
    What OS did you install?
    What notebook model A100-xxx do you have exactly
    You said you used Recovery disk is it right???
    I wonder why the unknown device appears in device manager if the recovery disk has been used. ?:|
    Recovery disk installs all drivers and usually no unknown devices should be visible in device manager

  • I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng

    Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng
    It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it doesn't find anything.
    Thanks in advance
    PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C&REV_03\3&11583659&1&FB
    PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C&REV_03
    PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C
    PCI\VEN_8086&DEV_9CA2&CC_0C0500
    PCI\VEN_8086&DEV_9CA2&CC_0C05
    This question was solved.
    View Solution.

    Hi:
    Download and install the Intel chipset driver from the link below.
    https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-
    The second file on the list is the auto install file.

Maybe you are looking for