Negative quantities in PM work order.

Hello Experts,
We are planning to allow negative quantities in PM work order.
Is there are any negative side effects of that?
Thanks,
Raneetha,

Greetings Raneetha,
As mentioned, the input of a negative Quantity in the "Components" tab allows you to create a Reservation with a negative Quantity. This allows you to do a Planned goods return to stock. This also lowers the Planned cost of the order by the value of the materials on the negative reservation. So you need to remember, anything you return to stock is assumed to be a full-value material, not scrap or damaged part, unless you use Split Valuation category.
A Planned negative reservation can be processed as any planned goods movement, e.g. in MIGO. This does not preclude an unplanned return of goods (which decreases the Actual cost, but not the Planned cost).
The reservation is otherwise same as any positive reservation and cleared upon TECO or the relevant confirmation. Note that still upon confirmation you can't do the negative goods movement.

Similar Messages

  • Service Work Order & Service Entry - quantities for services

    Hi,
    I have a work order, the item category for item 10 is set as "Service". A service is inserted in the "Services" tab of item 10 with quantity 100 EA. Service entries were entered.
    But when display the details of the service (either in ME23N or ML81N), the "Actual Quantity" in "Statistic" tab does not tally with my actual total quantity entered.
    For example, the Actual Quantity may display 100 EA. But the total quantity of all the service entries may only be 90.
    Did I missed out anything? Can anyone enlighten me?
    thanks.

    Hi Kishore,
    thanks for your reply.
    I have added quantities added for all my service entry sheets. The total does not tally with Actual Quantity field.
    In other words, my total quantities for all the service entry sheets is 90 EA. But the Actual Quantity field is showing 100 EA.
    I have used t-code MSRV6 to display the list of service entries for the service. It is showing me all the service entry sheet for the WO/PO. The total quantity is 90 EA, but Actual Quantity field is showing 100 EA.

  • Work orders and updating user status (via IW32)

    Hello All,
    I was given a design to create a program that will retrieve all open work orders. The program needs to check on all the purchase orders for that work order to check if order quantity matches the received quantity and the invoice quantity. If it matches, I will do an IW32 to change the user status to 'AIP' (All Invoices Paid). If there are no invoices or purchase orders, I will again, do an IW32 to change the user status to 'AIP'.
    And since this is my first time to work on a PM ticket, I'm not very familiar with the tables being used. I've tried looking for a list of PM tables. One table I got is AUFK (Order Master Data). I searched through the table and it has the fields for Sales Order Number (KDAUF) and Item Number (KDPOS). Is this the Purchase Order related to the work order? Also, is there a way I can see or verify it through a transaction? I tried looking into transaction IW33 but I couldn't find any Purchase Order Number there. Also, how do you know if a work order is open or not? Is there a field that indicates it?
    I was thinking if there are any BAPI's I can use to change a work order's user status instead of doing a CALL TRANSACTION 'IW32'? I saw a function module, RFC_CHANGE_PM_ORDER, that does a remote function call to IW32 but this has dialogs. I'd appreciate any input.
    Many thanks in advance!
    Regards,
    Kristine

    Hi
    You can use the BAPI - BAPI_ALM_ORDER_MAINTAIN to maintain orders.
    Given below few order related tables
    AUFK     -Production order headers
    AFIH     -Maintenance order header
    AUFM     -Goods movement for prod. order
    AFKO     -Order header data PP orders
    AFPO     -Order item
    RESB     -Order componenten
    AFVC     -Order operations
    AFVV     -Quantities/dates/values in the operation
    AFVU     -User fields of the operation
    AFFL     -Work order sequence
    AFFH     -PRT assignment data for the work order(routing)
    JSTO     -Status profile
    JEST     -Object status
    AFRU     -Order completion confirmations
    This may help you.
    Thanks & Regards,
    Govind.

  • PM work order "Reqmt Date" in General tab for the items in component tab

    Hello experts,
    Currently in our PM work order when the materials are added to the component tab to create purchase requistion the requirement date is defaulting to today. So every time the buyers have to update the purchase requisiton they need to change the requirement date field.
    We are planning to open the field ( so the requirement date will not default) .
    What can be the negative consequences of that?
    Would that be a issue for our MRP run?
    Thanks,
    Raneetha

    If you are putting Current date (coming as default), PR is getting the same date. Are you creating this PR through MRP??
    Even if you put any actual requirement date, based on MRP period, system will create the PR with appropriate date which has been mentioned in PM order.
    There is no impact of changing this date.

  • Material Reservation Process for Work Order

    I am new to the Plant Maintenance work order and material reservation process.
    Here is my scenario:
    I create a work order with a material that is maintained in WM and IM.
    Reservation is created.
    I got to MB26 to post goods issue
    Once I do this I see the qty of material moved as a negative amount to storage type 914 in IM (LS26) and stock removed out of WM (MMBE).
    Is this where the business process stops?
    Do I ever remove the stock out of 914?
    Does the material go from 914 to 916 and then get cleared out of inventory?
    Thank you

    Check [thread|PR Marked for deletion after Business Complete]  and [search|http://forums.sdn.sap.com/search.jspa?threadID=&q=PR+deletion&objID=f159&dateRange=all&numResults=15&rankBy=10001]
    -S.N

  • Preventing Deletion indicator in PR once work order is completed

    Dear colleagues,
    Users create work orders in IW31 with the choice of external service; control key is PM02. Once work order is saved purchase requisition (PR) is created in background. With reference to PR, purchase order (PO) is created by purchase specialist.
    When work order is technically completed (system status TECO) deletion indicator is set to PR line item(s) automatically which result in undesirable situations since PR(s) has subject to release strategy in our system.
    Is it possible to prevent setting deletion indicator in PR once reference work order is technically completed?
    Kind regards
    Melih

    Hi,
    In this case that behavior has negative effects on PR Workflow process because in our system when PR(s) is created it is subject to release strategy according to preconfigured conditions.
    Once the order is technically completed (TECO) deletion indicator is set to PR line item(s) automatically meanwhile release strategy tab is disappeared from PR line item(s).
    In addition to that in ME54N system gives the MEPO822 (Purchase requisition XXXXXXXXX cannot be released) message even PR is approved before the order is technically completed.
    Kind regards
    Melih

  • Linking Contract Master to Work Orders & Materials

    Hello,
    I'm researching the possibility of linking (tying) stock to a Service Order (in a Work Order) and/or Sales Orders before it arrived on the PO. This is for provisioning stock to customers. Is there any possibility that this could be done via Projects in SAP? 
    A colleague thinks there is a way to create a project (transaction code CJ01 or CJ27) and link it to a Purchase Order in project.  If the project was a reference document, could it be done as an example?  He also believes that there are special transaction codes for moving stock between normal stock and project stock (Special stock) such as 281Q and 412Q as examples. 
    Also, Transaction code MBBS appears to be an overview of the project to show valuated sales order and project stock? Project stock was referred to as a type of special stock?
    As an end user, I am not familiar enough with SAP to know about this project area but thought this might give you a starting point. However, I've been exploring some of the functionalities to come up with a
    solution.
    Thanks in advance.

    Hi
    You can use the BAPI - BAPI_ALM_ORDER_MAINTAIN to maintain orders.
    Given below few order related tables
    AUFK     -Production order headers
    AFIH     -Maintenance order header
    AUFM     -Goods movement for prod. order
    AFKO     -Order header data PP orders
    AFPO     -Order item
    RESB     -Order componenten
    AFVC     -Order operations
    AFVV     -Quantities/dates/values in the operation
    AFVU     -User fields of the operation
    AFFL     -Work order sequence
    AFFH     -PRT assignment data for the work order(routing)
    JSTO     -Status profile
    JEST     -Object status
    AFRU     -Order completion confirmations
    This may help you.
    Thanks & Regards,
    Govind.

  • Work Order & Activity Costs

    Iu2019m extracting the underlying SAP tables so I can populate a Data Warehouse with Work Orders information and I have identified the following SAP tables:
    u2022     Work Order tables: AFFL, AFKO, AFPO, AFRU, AFVC, AFVU, AFVV, AUFK, AUFM
    u2022     Bill of Material tables: MAPL, MAST, MKAL, PLAS, PLKO, PLPO, STAS, STLO, STPO
    u2022     Activity Cost tables: CKIS, CKIT, COST
    u2022     Other tables of interest: CHRD, CRTX, CSLA, CSLT, CSSL, JSTO, PLMZ, RESB, S022
    With the Work Order & Bill of Material tables I can identify the actual & target materials quantities & costs and I can also identify the actual & target activity / resource time spend.  The problem I have is that I canu2019t detect the join between the Work Order tables and the Activity Cost tables, so there must be a table (or two) missing that creates this link.
    Will you help?

    Thank you for your assistance. Finally found the table that best answered my question in COEP.
    Discovered lots of useful tables along the way.

  • WIP : Work Order Aging report

    Hello,
    Is there any standard program given by Oracle on WIP  as 'Work Order Aging report' ?
    I guess not.
    If its not, then is there any other program related to WIP Aging exists in Oracle?
    Thanks in advance.

    Hi,
    Can you please make Ship To also as Primary Business Purpose?
    Regards
    Raghavender K

  • Open Work Order report and shortage report

    Hello,
    First of all, I am very new to SAP and sap forum. I do need to learn SAP very fast. I work as Buyer and Planner. I would like to know how do you run open work order report and also how do run shortage report.
    I appreciate different feedback.
    Thanks
    Raj

    Hi,
    Use tcodes CO24. First you need to activate that report PPCOXPR1 in SE38 enter report name and execute
    In COOIS select list components you can be requirement qty and withdrawn qty , here you can find out open work orders also
    Thanks
    Diwakar

  • Error when printing work order with iw32

    Hello all,
    When i was printing work order using IW32, the order success to be saved but it can't be printed. And i get this error message :
    Express document "Update was terminated" received from author ...
    i check with T-Code SM13, and i found error on
    PM_ORDER_PRINT_CONTROL
    further, i go check to ABAP Short dump, and found the error analysis
    A RAISE statement in the program "SAPLSFES " raised the exception
    condition "CONTROL_FLUSH_ERROR".                                
    Since the exception was not intercepted by a superior program  
    in the hierarchy, processing was terminated.
    have anyone know the OSS or have some experience to solve this problem ? hope you can help me..
    thank you for your attention..
    Regards,
    Anggara Mahardika

    Hi
    Can u let  us know whether u are trying to Save the Print out on to ur Desktop ...  or using GUI_DOWNLOAD Fm in ur program ...
    surya

  • Advance payment against Purchase order/Work Order: F-47

    Hi SAP Gurus,
    Our Client's requirement is as follows u2013
    Advance payment against Purchase order/Work Order:
    1. Advance should be PO/WO wise & not item wise.
    2. Advance should not exceed total PO/WO value.
    3. Advance against PO should include taxes & conditions maintained in PO/WO
    When I put the purchase order number along with the item number, it is taking into account the basic price for that specific item. This amount is excluding Tax.
    Actually the advance is given against the Purchase Order. So whether it is possible to
    1. Remove the mandatory filed of  Item number against the PO?
    2. Whether the amount of the advance should be inclusive of the Tax?
    Regards,
    Amit

    Amit kulkarni,
    For this requirement you have to do validation of the amount field for advance payment againest PO.
    i thiought this is only way to get your requirement
    May be this information is useful to you
    Regards
    Surya

  • Open a closed work order.

    Hi Gurus,
    Can any one tell me is there a way to open a closed work order. The system status of the work order currently is CLSD and I have to make some changes to the work order, is that possible?
    Regards
    Anoop

    Hi Anoop/Jay,
    May be its too late but still thought of sharing if anyone face the same issue.
    I think you have set your order to "DO NOT EXECUTE" before release of an order which sets order status to CLSD.
    In this case you cannot change status of an order but still can change malf. Start date and time.
    You can only make changes to CLSD status by revoking business and technical completion if status CLSD is set post REL.
    Thanks
    Rohan

  • Work Order Status report

    Hi,
    Any body have ideal?
    What are the work order summary report mean for?
    I am using T-code ZPM02 to view the report but the report display the work center according to the category CRTL,REL,PCNF,CNF,TECO and CLSD with each colunmn display the figure.
    What is mean for CRTL,REL,PCNF,CNF,TECO and CLSD?

    PeteA,
    Thank you for the information, the report is indeed a customized report.
    Could advice how to diffrentiaze between customize and standard report in SAP system?
    Can the IW39 list all orders with all the status in IW39?
    The reason being I am having problem with the customize report display (work order summary report)the status diffrence with the IW39 is the detail report.I am now looking for the SAP standard report for work order summary report to compare with the customize report to verify which report are display not correct.
    Do you have any ideal others than IW39 what others report in SAP system show the work order summary report?
    Many thanks.
    Karen

  • Budget Exceed Issue in work Order (P.O) in Production Server.

    Hi Friends,
    I am getting different type of budget exceed issue, that to only in Production server.
    Here the issue is when I am creating the work order P.O (Acc.As. Cat.P, Itm Cat. D) with different service line items with respective WBSe with in the budget limit, then I am doing SES for some quantity, now when I am changing (I am decreasing not increasing) the same P.O line item available quantity and creating the new version now system is calculating the old version line item quantity + new version quantity (nothing but double) then giving budget exceed error.
    One more strange thing is, if I change quantity for one line item then system is giving budget exceed error for another line item which is having the different WBSe which was saved with out giving any error at the time of P.O creation.
    This issue is happening only in Production server ....same scenario I have run with the same values in both Dev. and Qau. (Where the config. is same in all 3 clients) but in both the clients it is working fine...but in production why the system is behaving in such a way I am not getting. 
    In the below I have given the test scenario...
    Service P.O Creation
    Line Item
    P.O Quanity
    Value
    WBS
    Budget
    Commitment
    SES. Quatity
    Actual cost
    1
    10
    100
    WBS 1
    2000
    1000
    5
    500
    2
    20
    200
    Wbs 2
    4000
    2000
    10.00
    1000
    3
    30
    300
    WBS 3
    6000
    3000
    15
    1500
    4
    40
    400
    Wbs 4
    8000
    4000
    20.00
    2000
    Service P.O change with new version
    Line Item
    P.O Quanity
    Value
    WBS
    Budget
    Commitment
    SES. Quatity
    Actual cost
    1
    6
    100
    WBS 1
    1000
    1000
    5
    500
    2
    20
    200
    Wbs 2
    2000
    2000
    10.00
    1000
    Budget exceed with the double value
    3
    30
    300
    WBS 3
    3000
    3000
    15
    1500
    4
    40
    400
    Wbs 4
    4000
    4000
    20.00
    2000
    If any one has come across with this type of issue and solved ...please suggest me ..
    Regards,
    Srikanth

    Hi,
    I have face similar issue in deleting PO line items.
    Even though I delete items, system check budget for deleted qty with the currency conversion + value & gives budget exceed error.
    In some cases we have asked user to deactivated AVAC asked to do the transaction, which is not recommended.
    You can try running CJBN & CJBV in sequence for affected WBS.
    Thanks & reg,
    Sam

Maybe you are looking for