Nesting SelectItemGroup like a tree is not POSSIBLE!!

I want to group my items in a tree structure. For example:
-Group100
----Group110
-------Group111
-------Group112
----Group120
-------Group121
-------Group122
-------Group123
-Group200
----Group210
--------Group211
----Group220
--------Group221
--------Group222
And the code to create these groups is as follows:
SelectItemGroup g110 = new SelectItemGroup("Group110");
SelectItem[] children = { new SelectItem(new Object(), "Group111"), new SelectItem(new Object(), "Group112") };
g110.setSelectItems(children);
SelectItemGroup g120 = new SelectItemGroup("Group120");
g120.setSelectItems(...);
SelectItemGroup g100 = new SelectItemGroup("Group100");
SelectItem[] children2 = { g110,g120};
g100.setSelectItems(children2);
//and the same for the rest...However when I bind the group100 to a SelectManyListBox I cannot see the TREE structure!!! It allows only one level nesting! The result is like this:
-Group100
----Group110
----Group120
-Group200
----Group210
----Group220
The third level children are not SHOWN!! Isn't it possible to group items further than 1-level??

It is not possible that when you launched the new software IOS7 does not work anymore. IMessage, facetime, email, address book, calls. is a 4s was the best time is ****. € 800 down the drain

Similar Messages

HT1386 Why is not possible to sync just content like musice ONLY, when I have no time to wait on whole proces of synchronization, there SHOULD be a way to sync JUST MUSIC and nothing else, I dont wanna wait 10minutes to have 3 songs I want to have in my i

Dear Apple, why is not possible in the year 2014...sync to my iPhone just content I want to separety, without the whole sync procedur(backinup,syncing whole purchased things and stuff like that) When I want to have in my phone for example just 3 new songs ..I dont wanna wait 10minutes because of whole synchronization!!! I want add to my iPhone just these 3 songs thats it! Would be perfect, If you will make possible to sync just parts like MUSIC, Apps, Fotos, separetly and not alltime together...it s****!

Ok.
I have Windows OS and iTunes for PC, but the problem is not in my PC, but in synchronization. Your synchronization take minute or two, you have thunderbolt lightning cable??? If is it by you really so quick than ok but by me is it with sync really slow and I have still powerhouse notebook.
I dont know how is it possible that your sync is so quick, but my iPhone starts transfering purchased aplications and all content to the PC, instead of downloading it PC itself without iPhone from iStore. So there is what happend when I am conecting my iPhone.
When it find my iPhone on the first try, it starts makeing backup, than transfering photos, aplication, some info from Safari and to the end also the MUSIC...this should be improved by Apple and it should be able to sync just MUSIC section and not whole system, when I changed just something in MUSIC section(like adding new CD..)
So it does on PC whole resync Maybe is it somewhere in options, but where? I really want sync sometimes just MUSIC or just Apps and nothing else(like Photos, Bookmarks...)
I am sorry for that angry tone, but I am really stresedby this 20minutes sync or 10 miutes...just becouse of adding 1-2 songs, this is by competition phones quicklier :/ !
Message was edited by: Tenotitlan

Error in Smartform: Nested output of tables is not possible....

Hi ,
I am getting the below error while executing the smartform.
Nested output of tables is not possible
Message ID: SSFCOMPOSER
Message Numer : 171
could any one plese help me?
Thanks & Regards,
surendra

Dear
AS i reply in thread ,
this error comes with some problem in functional Module .
as we know that two FM use in smartforms -
SSF_function_mudule
call funcion .
so you check both and i hope you handle this problem .
Regards,
Ravi

How do I update the browser on the MacBookPro? I would like to get newer version of Safari; however, if that is not possible, is there a version of anything that I can get for MAC OS 10.5.8?

How do I update the browser on the MacBookPro? I would like to get newer version of Safari; however, if that is not possible, is there a version of anything that I can get for MAC OS 10.5.8?

Hi kwalker08865,
It would appear that the most recent version of Safari that is compatible with OS X 10.5.8 would be Safari 5.0.6. If this would meet your needs, you can find more information and a download link on the following page:
Safari 5.0.6 for Leopard
Regards,
- Brenden

In system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, i cloud user and groups network and more

in system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, iCloud user and groups network and more.
Genius bar told me to erase the harddisk and install OSX Maverick again. This has not changed the problems with the system settings

You need to Repartition the drive as One partition which will erase all data from it and then reinstall OS X. then with the initial setup system you chose the language on the first screen that comes up. That sets the language for the whole system.
There is no other way of completely removing certain information created by a previous owner. this hold strue whether you are selling or give a Mac to someone.
To do the repartitioning you need to use the Online Internet Recovery system, if the Mac came with Lion 10.7 or above, or from the original system reinstall discs that came with it when it was new.

I need to generate a still shot from from a video. I would like to accomplish this task using a single application. If this is not possible with my MacBook Pro as purchased from Apple, please recommend which applications I can purchase.

I need to generate a still shot from from a video I made with my camera. I would like to accomplish this task using a single application. If this is not possible with my MacBook Pro as purchased from Apple, please recommend which applications I can purchase that include this feature. Thanks in advance.

For FREE do the following:
When you get to othe part of the video you want a still shot from, put the video on pause.
Take a screen shot: Apple>Shift>4 - which will produce a cross hair so you can manually select which part of the video you want.Check inside either your Applications or Utility folder for an app called Grab. Will do the above with just a single click.
If you still want to purchase software, suggest that you do a Google & MacUpdate search. This way, you can find exactly what you want.

I would like to express my Adobe Muse years subscription. Through the site this is unfortunately not possible to arrange that through my accounbeheer online. I is getting by referred to the customer support.

I would like to express my Adobe Muse years subscription.
Through the site this is unfortunately not possible to arrange that through my accounbeheer online. I is getting by referred to the customer support.
Is it only possible to arrange this via chat to or by calling to look for?

You can join support team via chat or Phone :
https://helpx.adobe.com/contact.html?step=MUSE
Thanks,
Sanjit

Is not possible i don't like a new software

Isn't possible pay One mobile 800€ and after the download IO7 don't make nothing.
I have i mac, MacBook Air and iPhone 4S,
Is not possible. Please find it a solution quikly.

It is not possible that when you launched the new software IOS7 does not work anymore. IMessage, facetime, email, address book, calls. is a 4s was the best time is ****. € 800 down the drain

Load, edit or delete PDF presets in CS6 InDesign not possible.

Load, edit or delete PDF presets in CS6 InDesign not possible, it says: The folder may be write protected.
How do I solve this problem? I also work with Adobe Acrobat Professional X.

OK.
Lets back up a bit and take things step by step so we all know exactly what's going on, and what you've tried and haven't tried.
First, what version of Windows are you using? The use simple file sharing is the very last option on my system (XP Pro) if you open Explorer and then use Tools > Folder Options > and select the View tab. This is also the tab where you will need to make hidden and system files visible, and I strongly recommend showing extensions for known file types as well. As far as I know this option (not to use simple file sharing) is available in XP home, too.
Second, once you've taken care of the first part, please do a search using the search in Windows Explorer, for *.joboptions under all files and be sure to select more options to search hidden and system files. You may find these files in more than one location, but the bulk of them will be in \Documents and Settings\All Users\Documents\Adobe PDF\Settings (note that this is the same directory as the one in the tree called "shared documents" -- I have no idea why the name is displayed differently in the folder tree than in the path in the address bar). Right click on one of those and select "Open Containing Folder" option.
The folder should open in a new window. Click the go up one level button in the toolbar (looks like a folder with an upward arrow on it), then right-click the settings folder icon and select either Properties or Sharing and Security (both open the properties dialog) and click on the security tab.
At this point, in all probability, the allow options are all grayed out because they should be inherited from the parent object. On my system the only user listed is "everyone" and they have full control. If yours is different, please let us know, and we'll go from there. If it's the same we'll try something different.
Peter

Navigation or tree structure is possible Adobe Interactive?..

Hi,
Navigation or tree structure is possible is Adobe Interactive form?.
Like
Header
>   ( When they navigate this arrow head, there is some record.. When you expand there may be record with which give again    navigation)
> A
   B
   C
>
>
Is it possible?
Thanks
GJ

Hello again,
of course that is possible. But there is not standard component for this. Build you can build your own and add it into your LCD library as a custom field/ object. In case you didn´t read my blog about how to do that, check it here: /people/otto.gold/blog/2010/01/12/adobe-forms-about-the-custom-components
Back to the tree control:
- lets create a subform which will be the root for the component
- inside the subform (which has direction top to bottom with flowed content) create a header (you can create this as a static text or as a text field or something)
- again inside the subform, create another subform (X2), this will hold all the content of the header node, what means: when clicking on the header node, all this will dissappear.
- inside the subform X2 you can create as many sub-root as you wish and follow all that once more - recursively
- now you need to write a script into the header field/ text onclick event. This script will check if the X2 subform is present (presence = visible) and if it is, it will set the presence to hidden and vice versa...
Regards Otto

Not possible to output CFTREEITEM in a CFC function?

Hi there,
I am parsing a sorted list of strings (in the form of a/b/c/,
a/b/c, /a/c/d etc.) and trying to make a treeview out of it.
I have the CFFORM and CFTREE tag in the top function and the
code that generate CFTREEITEM in a subfunction, but I got the
following error:
Context validation error for tag cftreeitem.
The tag must be nested inside a cftree tag.
It seems that ColdFusion doesn't recognize that calling code
is already nested inside a CFTREE tag in the top function. I
extract the code generating CFTREEITEMs to a sub function because
it is called multiple times from different context, it would be a
lot of hassle and quite stupid to "inline" it.
If what I am trying is, for whatever reason, not possible,
would it be possible then to have the sub function generate the
code into a string and somehow dynamically evaluate that?
Any hints or tips will be greatly appreciated!
Billy

Hi there,
I am parsing a sorted list of strings (in the form of a/b/c/,
a/b/c, /a/c/d etc.) and trying to make a treeview out of it.
I have the CFFORM and CFTREE tag in the top function and the
code that generate CFTREEITEM in a subfunction, but I got the
following error:
Context validation error for tag cftreeitem.
The tag must be nested inside a cftree tag.
It seems that ColdFusion doesn't recognize that calling code
is already nested inside a CFTREE tag in the top function. I
extract the code generating CFTREEITEMs to a sub function because
it is called multiple times from different context, it would be a
lot of hassle and quite stupid to "inline" it.
If what I am trying is, for whatever reason, not possible,
would it be possible then to have the sub function generate the
code into a string and somehow dynamically evaluate that?
Any hints or tips will be greatly appreciated!
Billy

Not possible to reverse the document in financial accounting Error

Hi All
We are getting invoice Data from Client
through ACC_EMPLOYEE_PAY02
Document Like
31 45699(vendor )    2356.00
31 45688 (vendor)    1245.00
31 45677 (vendor)    1000.00
31 45666 (vendor)    2000.00
40 Accur(Clearing)       6601.00
In this list some of vendors i did payment Run.
I need to reverse the 1 vendor open Item.
It is showing open item but i am unable to reverse this document.
i tried to FB03 but it is showing Below Error
Not possible to reverse the document in financial accounting
Message no. F5673
Diagnosis
Document '1900000003' in company code '1164' should be reversed. However,
this document was not posted in the Financial Accounting module, HRPAY is, rather, of type ''.
System Response
Documents which were not originally posted in Financial Accounting also cannot be reversed in Financial Accounting.
Procedure
Reverse the original transaction.
You can display the original document from the FI document via 'Environment' -> 'Original doc.'.
I tried to trace Original Document.
trhough Environment -> Original Doc.
ERROR is
Payroll Posting Document 000000091 does not exist
How to Reverse the Open Item.
raju.

Hi,
SAP doesn't allow you to reverse a document in FI if it was created subsequently from another module (in your case HR).
Why don't you use F-44 transaction code to manually clear the open vendor line item and offset it against the same clearing account?
Regards

NTLM Authentication : why is it not possible to create more than one NTLM realm ?

Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
Regards

Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

When i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?

when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?

Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed

SSFCOMPOSER - 154 - No output request open. End not possible.

Hi Experts,
I'm trying to print multiple smartforms using FMs SSF_OPEN and SSF_CLOSE. Inside the main program RBDAPP01 (Inbound processing for IDOCS) there is a loop at the IDOCS to be processed. Deep within the processing, we have a custom FM being called which prints smartforms. Since there is a loop at the calling main program, I have organized the code in the custom FM such that the first IDOC calls SSF_OPEN and the last IDOC calls SSF_CLOSE, so that all IDOCS in between will be able to print their smartforms. Here is the call stack:
8
SAPLZCUSTOM
ZCUSTOMPROGRAM
113
FUNCTION
ZCUSTOMPROGRAM
7
SAPLPPC1
ZCUSTOMPROGRAM
136
FUNCTION
KK2A_GET_DATA_FROM_IDOC
7
SAPLPPC1
LPPC1U01
1
FUNCTION
KK2A_GET_DATA_FROM_IDOC
6
SAPLBD20
LBD20F0A
454
FORM
IDOCS_PASS_TO_APPLICATION
5
SAPLBD20
LBD20F0B
69
FORM
IDOCS_PROCESS
4
SAPLBD20
LBD20U05
260
FUNCTION
IDOC_INPUT
3
SAPLEDIR
LEDIRU02
182
FUNCTION
IDOC_START_INBOUND
2
SAPLBD12
LBD12U04
37
FUNCTION
APPLICATION_IDOC_POST_IMMEDIAT
1
RBDAPP01
RBDAPP01
388
EVENT
START-OF-SELECTION
The problem is:
1. When I only have 1 IDOC being processed, SSF_OPEN and SSF_CLOSE happens in the custom FM at the same time. This creates a successful spool.
2. Whereas, when I have 2 or more IDOCS, SSF_OPEN happens in the first IDOC, but then it goes back to the calling program, and then when the last IDOC is encountered SSF_CLOSE is called. The FM SSF_CLOSE in this scenario calls the exception INTERNAL_ERROR (sy-subrc = 2).
The system message is SSFCOMPOSER - 154 - No output request open. End not possible.
Why is this happening? Is it because that other programs (calling programs) may have affected the status of SSF_OPEN? It seems that the SSF_OPEN is no longer open.
Thanks in Advanced,
Jack

No, it will not hold the smartform open, but you don't need to hold it open in order for printout to be accumulated in one spool. Spool system does the accumulation automatically, provided the spool requests that are to be added to an existing spool request are:
- generated in the same transaction and
- have the same attributes (such as user, title, output device, client from which the request was issued, number of copies, priority, cover sheet setting, archive mode, and ABAP session number).
Important is: where do OUTPUT_OPTIONS like printer come from currently? Is print parameters popup displayed on first Idoc for user to choose printer and options? Or do you use USER_SETTINGS = 'X' to simply take over defaults from user master? If the print options dialog is displayed, it needs to be controlled as well so it's displayed only once.
Assuming print options come from the user in dialog, the logic without explicit open/close could look somewhat like this:
On first idoc:
- call SSF_OPEN importing JOB_OUTPUT_OPTIONS to display print options dialog; move-corresponding JOB_OUTPUT_OPTIONS to global OUTPUT_OPTIONS;
- set OUTPUT_OPTIONS-TDNEWID = 'X' and clear OUTPUT_OPTIONS-TDFINAL, to ensure new spool will be started (overriding user choices for these parameters!);
- if the user has set OUTPUT_OPTIONS-TDIMMED = 'X' save it globally and clear it;
- set CONTROL_PARAMETERS-NO_OPEN = 'X';
On subsequent idoc:
- clear OUTPUT_OPTIONS-TDNEWID;
- clear CONTROL_PARAMETERS-NO_OPEN;
On last idoc:
- set OUTPUT_OPTIONS-TDFINAL = 'X' (this is not absolutely necessary, but prevents further appending to the spool);
- restore OUTPUT_OPTIONS-TDIMMED from the value saved on first idoc;
Calling Smartform:
- set CONTROL_PARAMETERS-NO_DIALOG = 'X';
- call smartform passing OUTPUT_OPTIONS and CONTROL_PARAMETERS;
The logic is somewhat complicated; I'd wrap it in a class (singleton, which would be de-instantiated after last idoc) to avoid global data and code other than simple method call(s) in FM.
Even if you decide to refactor the logic, it would still be important to understand, I think, why the current logic does not work (where and why smartform gets closed)... Maybe there are some nasty "surprises" somewhere, and your current algorithm should work.
cheers
Janis

Nesting SelectItemGroup like a tree is not POSSIBLE!!

Similar Messages

Maybe you are looking for