Netbeans generated code
Hi I have casually added an entity manager to the UI and am unable to remove it completely as some reference is still maintained in the generated code.
(I can find it it in the Declarations View) - thanks
I am unsure how to proceed.I dunno... but this isn't a java language question... so you'll do probably do better:
1. search the netbeans FAQ's; and/or
2. posting on the netbeans forum.
Some of the locals here get narky whenever anyone posts any even slightly "off topic"... Personally I couldn't give a toss, but I do know (from personal experience) that IDE specific questions don't tend to attract a good response on this forum... And this thread is yet more evidence... I'm the only one who is currently active who is willing to address the problem at all.
I wish you the best of luck with it... and very merry Yuletide to boot.
beer++;
Similar Messages
-
Adding parameters to Netbeans generated code
I'm new to Netbeans and I'm sure this functionality exists, I just don't know what properties to select...
I'm using the MigLayout and cannot figure out how to get the .add(Component) to pass additional parameters in the generated code.
Netbeans Generated Code: jPanel4.add(jButton1);
Desired Code: panel.add(comp3, "wrap");
There are custom code options for "pre-adding" and "post-adding" however that puts code in the lines above/below the .add(component) line. XXX.add(...) can take one - several parameters, how control them in Netbeans? I am finding the Netbeans support documentation to be extremely difficult to search and google usually turns up better results.
Any suggestions??Thanks for the reply...
Following these instructions,
Right clicking on Component in the Object Browser
Selecting Customize Code (edit only edited text on the component)
I could only edit:
jPanel4 = new javax.swing.JPanel();
jRadioButton1.setText("jRadioButton1");
but not:
jPanel4.add(jButton1);
Have a screen capture but don't see a way to attach files... -
I'm using NetBeans IDE 6.1 UML editor to generate java code. When I choose the "Generate Code" option and select the options I want. The console shows the message:
Generating source from template "Java/CompilationUnit.java" ...ERROR: java.lang.NullPointerException
How do I find where the Null Pointer Exception is being thrown?Rick.Lohmeyer wrote:
I'm using NetBeans IDE 6.1 UML editor to generate java code. When I choose the "Generate Code" option and select the options I want. The console shows the message:
Generating source from template "Java/CompilationUnit.java" ...ERROR: java.lang.NullPointerException
How do I find where the Null Pointer Exception is being thrown?You go over to the NetBeans forum and ask them the same questions, since this is not a Java question, but a IDE specific question. Also if you are not a fairly seasoned programmer, then may I happily wish you cheers with all the frustration and grief that inevitably awaits you in your autocoding endeavors. -
Unlock the machine generated code - NetBeans
In Netbeans IDE how to unlock the machine generated code.
i.e:
if we create a GUI form it automatically put some lines to it.
IDE Generated Code
How can i edit those lines???
ugpAs long as you continue to use NetBean's editor, it will continue to regenerate the blue code and overwrite your changes.
Solution 1 - stop using the NB editor to change the code. You will no longer be able to use NB's graphic UI when you use another editor, so you should finalize the layout first.
Solution 2 - use NB's capabilities that allow you to add custom code to the blue code. Each component's Properties windows shows a Code button at the top, which lists Pre-Creation, Post-creation, Pre-Init, and Post-Init Code entries. Each of these allow you to create code and insert it at the location specified. -
Auto generated code in makefile
For our product we have a TCL script that reads a series of text files and generates C++ classes for easy access to database records. Our code has been in use for make years and works very well. We have always used a solaris command prompt dmake to compile, which first generates the C++ files then complies them. It uses a series of enviroment variables which a user must set before compilation.
I recently tried to create a Sun Studio Express based on NetBeans 6.5.rc1 project from a make file. This has worked for every other makefile except for this one. The others do not have any auto generated code.
To run sun studio I in a command prompt source in the environments then run netbeans. Then I choose to build the product but I get an error. I then try to copy the command it is running into telnet window and it works fine. Does anyone have an idea on why in the sun studio I get and error while the telnet window works fine.I think the problem is that the SunStudio IDE runs the build command in a wrong directory.
Can you verify that the working directory is correct?
(it is in project properties: Build > Make)
Also you can find this directory in the message in the output, when you try to build the project.
That's the message, that you copied to the terminal window.
Thanks,
Nik -
10.1.3 Generated code......
Hi all,
Nice if JDev able to allow user to disable or hide the
generated code in source editor. (Something like Netbeans)It is possible to set all IDE generated code fold automatically when you open up source code ?
or set it to readonly.... This is very important in code control....
Thanks -
Hello,
I have Sun Java Studio Enterprise 8.1. A teacher told me this was a good tool to make you UML and let java studio generate the code. You could preform this action by checking the checkbox "generate code" when you created a "Java-Platform Model" in the UML section. I have already created a java libary but i dont have the "generate code" checkbox.
Is this feature removed in 8.1 and does 8.0 still have it?
LeDieuAccording to http://www.netbeans.org/issues/show_bug.cgi?id=78590:
This checkbox is not longer in the UI since live roundtrip has been disabled.
Also: http://www.netbeans.org/servlets/ReadMsg?listName=nbusers&msgNo=84056
You may want to check out the 'Generating Code' help topic in the javahelp (help | contents menuitem). -
Error while generating code in brf+ function
Hi all,
i am getting error while generating code in function in bRF+
am using weight fields ..if i dont use quantity fields am able to generate code .
please help.
Thanks.Can you provide more details? What exactly is the error?
I think we have provided a note for the issue. With the details it should be possible to identify the note number. -
OWB Error while generating Code for a mapping
I have a simple mapping loading from a source to a flat file. When I try to generate code it gives me the following Error
VLD-2357: Target Data File name not specified for file <target Flat file name>.
I am new to OWB so any help on the same will be greatly appreciated. How can I specify target Data File name in the mapping configuration under Flat file operators
Thanks
AnishIf you configure the mapping in the UI from the main design tree and select the name of your file operator under the tree node 'Flat File Operators' on the right hand side panel the properties should be displayed - one of these properties is 'Target Data File Name', enter the name of your target data file name.
Cheers
David -
Error while deploying generated code from sup to iPhone
Hi
I generated the code using Sap unwired platform for Objective-c. I followed the steps specified in the below link
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01213.0153/doc/html/mqu1264543829068.html
for deploying the generated code into iPhone simulator, i am getting the following error
Undefined symbols:
"_OBJC_CLASS_$_SUPEntityAlias", referenced from:
objc-class-ref-to-SUPEntityAlias in SUP101_Customer.o
objc-class-ref-to-SUPEntityAlias in SUP101_LogRecordImpl.o
Can any one help me in this
Edited by: KiranSanka on Dec 2, 2010 1:18 PM
Edited by: KiranSanka on Dec 3, 2010 7:26 AMHi
While compiling did you get a warning? something along the line "missing required architecture i386 in fileu201D? if so refer this link http://stackoverflow.com/questions/1456185/build-error-missing-required-architecture-i386-in-file
Regards
Jinesh -
Error while generating code for deployment
I am getting the following error:
Error generating findTest1ByMarks(java.lang.Integer) query for Bean Test1(Abstract scheme name=Test1) Error=query cannot be pushed down
Query="select ..."
Could someone help me?
I am trying to generate code of Container Managed Entity Bean in WSAD 5.0.
ThanksIf you configure the mapping in the UI from the main design tree and select the name of your file operator under the tree node 'Flat File Operators' on the right hand side panel the properties should be displayed - one of these properties is 'Target Data File Name', enter the name of your target data file name.
Cheers
David -
How to use generated code from "Import Web Services" with Cairngorm Framework
I recently downloaded Flex Builder 3 beta 2 and tried out the
wizard that lets you import web services. The code that is
auto-generated makes if fairly straight forward to consume web
services using the object types defined in the WSDL. No longer does
the developer need to decode the XML payload! The only problem I am
having is how does you integrate the auto- generated code with the
Cairngorm framework? This seems like a huge question for anyone who
might want to leverage Cairngorm and the auto-generated proxy code
in the same project (like me).
Here are the problems that I see so far.
1) How do you configure the generated service class to work
with the Cairngorm service locator? The service constructor only
accepts a “LCDS destination string” which implies that
you must use Lifecycle data services. Unfortunately, the project I
am trying to retrofit currently uses a WebService and does not use
data services. All I really need to do is change the endpoint URL
(ie from local to a development server). This issue is noted in the
bug https://bugs.adobe.com/jira/browse/FB-8456. What I think is
needed is a way to set the endpointURI in the Services.mxml file.
2) Even if I come up with a hack around #1, I do not receive
a callback to my IResponder even though I register it immediately
after the method call. I can register and listener function within
my business delegate and receive the callback, but my Command
object, which implements IResponder, does not receive the call back
even though it is registered. From what I read in the ASDocs it
should but it doesn’t for me!
These are the issues I have observed in 3 hours of messing
with this. I hope this makes sense. I would love to integrate
auto-generated web service proxies into Cairngorm but I don’t
see a straight forward way without re-architecting Cairngorm. Has
any one else run across this issue? If so, do you have any insights
on how to proceed? Any help is appreciated.Since I posted this question, I have abandoned the notion of
auto-generated web services and embraced the good old FDS concept
where the RemoteObject meta-tag does all the conversion work for
me. We are now using the Granite DS package and it is working well
for us. I would love to consume web services, but it just isn't
worth the hassle when all you have to do with Granite (and FDS) is
cast your return objects to the proper object type.
BTW, since this posting, I have investigated competing Flex
app frameworks. After my research, I checked out the PureMVC
framework. Wow!! Cairngorm always left me with an uneasy feeling
and I guess I am not alone. Apparently, Cliff Hall felt the same
way. That is why he started the project. I like his approach alot
more than Cairngorm especially since it includes notifications
which allow me to broadcast my own app level events independent
from the AS Event framework. Check out PureMVC. For what it is
worth, it has my humble endorsement. Cliff was even gracious enough
to acknowledge the other Adobe Consulting guys for their work. Good
for you Cliff, I respect that. Check out a better way at
http://www.puremvc.org/ -
I have new Adobe premier Elements13 and Photoshop elements 12, (Download from Amazon) but Cannot access website to generate code and register. Please help if you can.
I do not know how to find my PC specific code, nor can I simply use another PC if the programs are then only for use on that (not my main) PC!. I have entered the correct serial/codes which came in the download files but simply cannot go further as each time I try it fails to connect with the website?
VincePlease post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements -
Need help with flashvars in cs5.5 html generated code
how could use flashvars in cs5.5 html generated code, there are tutorial in net about flashvars but its all cs4 with javascript in it while cs5.5 html code doesn't have. here is the code for non-IE generated by cs5.5
<!--[if !IE]>-->
<object type="application/x-shockwave-flash" data="sample.swf" width="800" height="800">
<param name="movie" value="sample.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#000000" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />
<!--<![endif]-->
<a href="http://www.adobe.com/go/getflash">
<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
</a>
<!--[if !IE]>-->
how can I put flashvars in html and as3?<!--[if !IE]>-->
<object type="application/x-shockwave-flash" data="sample.swf" width="800" height="800">
<param name="movie" value="sample.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#000000" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<PARAM NAME=FlashVars VALUE="imageFilename=images%2Fimage1%2Ejpg">
<param name="allowScriptAccess" value="sameDomain" />
<!--<![endif]-->
<a href="http://www.adobe.com/go/getflash">
<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.g if" alt="Get Adobe Flash player" />
</a>
<!--[if !IE]>-->
and you can read via flash AS3:
http://www.permadi.com/tutorial/flashVars/indexAs3.html -
NoSuchMethodError in findMethodInfo(__methodSig) in ejbc generated code
Hi All,
Happy new year!
Does anyone know when weblogic.ejbc calls "findMethodInfo(__methodSig)" in its
generated "*HomeImpl.java" classes?
This is causing my code to end in a NoSuchMethodError exception.
The generated code for the included beanManaged.AccountHome does not include this
call, while the code generated for my code does.
Can anyone tell me why?
Anyone from the Weblogic people?
Thanks,
Boogieboogie wrote:
Rob Woollen <[email protected]> wrote:
boogie wrote:
Thanks for the reply, Rob.
So the "findMethodInfo()" is caused by the presence of multiple interfacesat
compile time.It's probably caused because ejbc generates code for version 1 of your
interface
but you then deploy a jar that loads version 2 of your interface.
<boogie>
i'm using the same interface. however, at compile time, the interface is both
on the classpath (since i've just compiled it) and in the pre-ejbc jar file (which
i'm passing to weblogic.ejbc).If it's in the classpath and in the ejb.jar, then ejbc finds the version in the classpath and
generates code against it.
from what you've said, i gather this is why ejbc
puts in a "findMethodInfo()" call in the --HomeImpl.java files that it generates.
</boogie>
<boogie>
SCENARIO 1: I use my build script.
condition: the home interface is found and compiled, the EJB classes placed in
a temporary jar file, then passed to EJBC (with -keepgenerated flag)
output: the generated MyBeanHomeImpl.java calls "findMethodInfo()" and i get NoSuchMethodError
exception at runtime
If the version in the classpath and the version in the jar file were exactly the same, then ejbc
would run fine. It fails when they are different. ejbc is generating code for a method that
appears in the version that it is loading.
-- Rob
>
SCENARIO 2: I manually build.
condition: i jar the files manually, pass the jar to weblogic.ejbc (with -keepgenerated)
without specifying a classpath; the current classpath doesn't include the compiled
home interface;
output: the generated MyBeanHomeImpl.java doesn't call "findMethodInfo()", code
runs as expected
SO, i need to build with scenario 1 AND still make it run at runtime. i don't
have multiple copies of the EJB classes/interfaces at deployed or in the classpath
runtime, but i keep getting the NoSuchMethodError exception because of the "findMethodInfo()"
call that weblogic.ejbc insists on making. what can I do to solve this problem?
thanks!
really appreciate the help!
</boogie>
-- Rob
Rob Woollen <[email protected]> wrote:
There's some sort of mis-match between the interfaces that ejbc is
finding
(and
generating code for) and the interfaces being deployed.
I would check your classpath and remove all occurrences of the homeinterface
class. It should only be in the jar file. Then re-run weblogic.ejbc
-- Rob
Boogie wrote:
Hi All,
Happy new year!
Does anyone know when weblogic.ejbc calls "findMethodInfo(__methodSig)"in its
generated "*HomeImpl.java" classes?
This is causing my code to end in a NoSuchMethodError exception.
The generated code for the included beanManaged.AccountHome does
not
include this
call, while the code generated for my code does.
Can anyone tell me why?
Anyone from the Weblogic people?
Thanks,
Boogie
Maybe you are looking for
-
How do I copy whole farm in 2013 Test to 2013 Production or is this more trouble than worth?
Hi, We are migrating from SharePoint 2010 farm to a TEST SharePoint 2013 farm as Microsoft recommend. The test farm is almost complete. The Host Url Site Collections under the main Web Application all use a Sharepoint UAT prefix style name i.e. SUAT<
-
CR2008 report runs in designer but fails when deployed
Hi, I have a report that was originally developed in CR XI. It worked perfectly fine in CRS XI also. We upgraded the server to CRS2008. But my report does not run on the server now. It gives the error "Invalid field name". However, the report runs fi
-
Any FM to update VBKPF??
Hello... I'm facing an issue when trying to create a parked document... we made a program using the standard FM: PP_COMPLETE_DOCUMENT_ENJ we are trying to automatize the transaction FV50... It's working fine for most functions, but for the VBUND fiel
-
I have two external drives connected to my iMac, one is FW and the other USB. I am using both to backup via SuperDuper! It takes about two hours via FW and three times that via USB (2.0). I am backing up about 220 gigs of data. Is there any reason th
-
Scriptlet close brace '}' unbalanced
Hello, I am using Weblogic Server 6.1 SP 6 and I am getting the problem that is suposed to be fixed with my given service pack. Why am I getting this error if the problem is documented as fixed? Change Request: CR093014