Netflow configuration with snmp version 3
Dear All,
I have configured snmp version 3 but while i am putting the IP address in netflow software during the time i am getting error . I am suspecting issue with the netflow configuration.
Below is the configuration. Please let me know what configuration are required
snmp-server group ROGROUP v3 priv
snmp-server user monitor ROGROUP v3 auth md5 abc priv aes 128 abc access 30
Now the issue has been resolved after changing the netflow version 5 to 9 from cisco device.
Similar Messages
-
PRI monitoring problem with SNMP
Hello
I'm having some problems with PRI monitoring.
I'm using cpmDS1ActiveDS0 MIB on a 3800 VoIP gateway with 4 PRI (2x2) (IOS 12.4(4)T1)
1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0 - I can see PRI 0/0/0 total number of calls
1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.1 - I can see PRI 0/0/1 total number of calls
1.3.6.1.4.1.9.10.19.1.1.9.1.3.1.0 - Error
1.3.6.1.4.1.9.10.19.1.1.9.1.3.1.1 - Error
1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0.x - Error
1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.1.x - Error
The PRIs that we want to see are 0/1/0 e 0/1/1...... (bad luck!)
Do I need to make some special configuration on the Router?Have you had any responses to this issue ?
I am running into exactly the same issue and have tried everything I can find to get these individual PRI (count of channels/lines in use) statistics.
Just for the record, here are some of the SNMP OIDs that I have tried (the ISRs do respond to them, only thing is, the data they send back is mostly rubbish...) the output below is from two separate routers, with different versions of IOS running (which is shown in the sysdescr response):
Note that the query in red in the second router was responded to with a valid response in the FIRST router...
All of these OIDs have been suggested at various sites online as useable SNMP OIDs for the ISR, but at other sites, they are suggested to be faulty. I have found no definitive statement for ways to get these stats successfully on the ISR platform (which amazes me.) Output below is using net-snmp to collect the stats.
I welcome any suggestions as to how this can be done reliably for the ISR, and what IOS versions WILL work. (since I am getting way different reponses to the same OIDs on the two versions below).
You'll see that for the second (DC) router below, the values are always Zero.
Yet I can guarantee that the ACTUAL stats are NEVER zero during the time period queried.
Timestamp: 2010-12-27_13:56:31.73
C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmActiveDS0s.0
.1.3.6.1.4.1.9.10.19.1.1.4.0
C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0
.1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0
C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0
.1.3.6.1.4.1.9.10.19.1.1.3.0
C:\usr\share\snmp\mibs>snmptranslate -On CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0
.1.3.6.1.4.1.9.9.63.1.3.3.0
C:\usr\share\snmp\mibs>snmptranslate -On ISDN-MIB::isdnBearerOperStatus.32
.1.3.6.1.2.1.10.20.1.2.1.1.2.32
From ROUTER2 - HQ:
SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software,
3800 Software (C3825-ADVIPSERVICESK9-M),
Version 12.4(15)T8, RELEASE SOFTWARE (fc3)
CISCO-POP-MGMT-MIB::cpmActiveDS0s.0 = Gauge32: 14
CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0 = Gauge32: 14
CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0 = Gauge32: 7
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0 = Gauge32: 7 interfaces
ISDN-MIB::isdnBearerOperStatus.32 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.33 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.34 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.35 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.36 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.37 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.38 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.39 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.40 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.41 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.42 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.43 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.44 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.45 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.46 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.47 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.48 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.49 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.50 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.51 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.52 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.53 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.54 = INTEGER: idle(1)
From ROUTER2 - DC:
SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software,
3800 Software (C3825-ADVIPSERVICESK9-M),
Version 12.4(18), RELEASE SOFTWARE (fc1)
CISCO-POP-MGMT-MIB::cpmActiveDS0s.0 = Gauge32: 0
CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0 = Gauge32: 0
CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0 = Gauge32: 0
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0 = No Such Object available on this agent at this OID
ISDN-MIB::isdnBearerOperStatus.32 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.33 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.34 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.35 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.36 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.37 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.38 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.39 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.40 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.41 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.42 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.43 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.44 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.45 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.46 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.47 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.48 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.49 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.50 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.51 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.52 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.53 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.54 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.81 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.82 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.83 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.84 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.85 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.86 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.87 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.88 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.89 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.90 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.91 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.92 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.93 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.94 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.95 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.96 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.97 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.98 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.99 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.100 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.101 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.102 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.103 = INTEGER: idle(1)
Timestamp: 2010-12-27_13:56:35.02 -
LMS 3.2 with SNMP v3 not working
Hi ,
My network is currently running with SNMP v2 configured in easch devices. With snmp v2 our LMS 3.2 server is working fine. However we have planned to migrate our network to snmp v3 . I have configured my few devices for SNMP v3 and added them to my LMS server.
Except DFM module these new SNMP v3 devices are working fine in all other modules. In DFM these devices are reflecting under "snmp timeout" group.
I checked with device center -> management station to device; where the SNMP v3 connections are showing "okey"
following are tyhe configuration i have done in my devices.
snmp-server group v3g v3 priv read testr write testw
snmp-server user v3u v3g v3 auth md5 test123
snmp-server view testr iso in
snmp-server view testw iso in
snmp-server host 10.X.X.38 version 3 priv v3u
snmp-server user v3u v3g v3 auth md5 test1234 priv des56 test4321
snmp-server group v3g v3 priv read testr write testw
snmp-server user v3u v3g v3 auth md5 test123
snmp-server view testr iso in
snmp-server view testw iso in
snmp-server host 10.X.X.38 version 3 priv v3u
snmp-server user v3u v3g v3 auth md5 test1234 priv des56 test4321
followinfg are my module details.
LMS : 3.2
CM : 5.2
CV :6.1.9
CS :3.3.0
DFM : 3.2.0
IPM : 4.2.0
RME : 4.3.0DFM behaves different than the other modules.
DES56 is not a supported privacy algorithm for DFM. You can use DES or AES128.
Supported Algorithms in DFM
The details of the algorithms supported in DFM are:
•AuthNoPriv Mode — Supported Auth Algorithm: MD5 and SHA
•AuthPriv Mode
–Supported Auth Algorithm: MD5 and SHA
–Supported Privacy Algorithm: DES and AES128
–Unsupported Privacy Algorithm: 3DES, AES192, and AES256
For more details check :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_device_fault_manager/3.2/user/guide/useDevMg.html#wp1483766
-Thanks
Vinod -
I'm working with vADM 6.2.1.
I am having issues with SNMP trying to discover IBM iSeries servers. I can use snmpwalk from windows machines and get a response from the iSeries server, but when I use snmpwalk from the vADM VM collector all I get is a timeout. My policy is also failing to connect to the host. The iSeries sysadmin believes that the problem may be that the response is coming back on a different port than 161 (See the document below). If the fact that the iSeries server is responding back on a different port, or a port above 5000, then I don't quite understand why other implementations of snmpwalk are capturing mib information but the vADM Fedora version is not. I'm not sure what else to try to get it to work. I have validated that the vADM collectors (all of them) are registered as management hosts on the iSeries server and I know there are no firewals intervening.
Document Title
The IBM iSeries Family of Servers SNMP Agent Responds on an Ephemeral Port Rather Than Port 161
Document Description
The user finds that when a request is made to the IBM iSeries family of servers SNMP Agent on port 161, the iSeries family responds on a port above 5000. Why is the iSeries so different from VM or IBM MVS systems that will receive and respond on the same SNMP port? Many customers have a firewall and don't want to open all ephemeral ports above port 5000. Is there a work-around to this?
This is working as designed. There is no current configuration you can use to force SNMP to respond on port 161. The semantics they are looking for are mostly identified with TCP - connection oriented (statefull) sessions. SNMP uses UDP (connectionless) protocols, and the most common way to send datagrams with UDP is by using an ephemeral port.
The original SNMP developers said that there are separate jobs: a receiver job to receive all requests from all managers, and the sender job responsible for the accessing the MIB database and actually responding to the request(s). The receiver job passes off the requests to the sender job and goes back to listening for new requests. Because both jobs cannot bind to port 161 (this was written in V3R1 when mechanisms like spawn were unavailable), the receiver job uses 161 and the sender job uses a random port.I don't believe that platform is supported for vADM Detail Discovery.
If I were to troubleshoot this, I'd try to see if stopping the iptables firewall allows this to work -just as a test. If this does work, then you'll need to configure the IP Tables firewall settings to allow for higher-numbered incoming ports from the expected IP Addresses or ranges where you think you'll be probing. I would not continue running with IP Tables down.
While you're testing this it might be a good idea to run tcpdump to see if the Collector/Single-box system is sending/receiving traffic from the target. -
RCVCAT database is not compatible with this version of RMAN
I am getting the below error while trying to configure rman catalog datababse.
rman target prod_dba/Pass1234@proddb catalog cat_dba/Pass1234@catdb
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: TESTDB (DBID=2409515669)
connected to recovery catalog database
recovery catalog is not installed
RMAN>
RMAN> register database;
recovery catalog is not installed
recovery catalog is not installed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 07/20/2007 19:05:40
RMAN-06429: RCVCAT database is not compatible with this version of RMAN
RMAN>
And Oracle version is same in proddb and catdb
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
PL/SQL Release 9.2.0.1.0 - Production
CORE 9.2.0.1.0 Production
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
NLSRTL Version 9.2.0.1.0 - Production
any inputs...
Thanks.Hi,
when upgrading catalog am getting the error like,
error occurred in source file: krmk.pc, line: 6986
text of failing SQL statement: ╠≥`☺
ORACLE error from recovery catalog database: ORA-00942: table or view does not e
xist
error occurred in source file: krmk.pc, line: 6986
text of failing SQL statement: ╠≥`☺
ORACLE error from recovery catalog database: ORA-00942: table or view does not e
xist
error occurred in source file: krmk.pc, line: 6986
text of failing SQL statement:µ`☺
ORACLE error from recovery catalog database: ORA-00942: table or view does not e
xist
Whether i need to run catpath.sql etc on the db? -
RMAN-06429: TARGET database is not compatible with this version of RMAN
he Hi,
how can i solve this issue . how i will upgrade the Rman. My production database details are below
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
while i'm configuring rman i'm getting below error . please help me.
C:\Documents and Settings\vj.dcruz>rman target / catalog rman01/rman01@upp
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Sep 14 08:18:02 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Recovery Manager incompatible with TARGET database: RMAN 8.0.4.0 to 10.2.0.0 required
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-06429: TARGET database is not compatible with this version of RMAN
rgds,
johnJohnvd wrote:
Hi Hemant,
i'm doing same thing login 10.2.0.0 database and configure the rman but while connect target its saying that my Recovery Manager: Release 11.2.0.1.0 - Production on Wed Sep 14 09:04:59 2011
how its happening is there any where i have to change the path.
Regards,
johnJohn, you need to use the RMAN binary which is located in bin folder of Oracle Database (ie /u01/oracle/product/10.2/db1/bin). You shouldn't use "rman which comes with Oracle 11g client".
If you are using windows, run the following commands in command prompt and then copy/paste the output:
echo 5ORACLE_HOME%
echo %PATH%
If you are using unix, run the following commands in terminal and then copy/paste the output:
echo $ORACLE_HOME
echo $PATH
Regards
Gokhan -
Cannot open file, Photoshop is not compatible with this version of photoshop. 2 weeks
This has been a problem for almost 2 weeks now. Cant save any work in photoshop, files are unretrievable once closed. I get the same error message. I spent all of last week online with Adobe Tech support, screen sharing conference etc, now iMac isnt working properly. AAARRFGGHH.
Same prob on iMac and new Macbook pro
Last week Adobe via screen share uninstalled and re-installed Photoshop, took a few hours and still nothing. I have lost many hours work here. Cant reach Adobe and I am really pissed off. Cant reach a human via the support emails they aren't working. I have asked to speak to a Programmer or Manager for help with this and I have received none!
Latest message sent through to Support:
OLd support file not opening.
I cant open this one:
1/26/11 Case #0182004961: Unable to open some photoshop documents.
Open - Pending Adobe Response
So we need to start a new way of communicating. I am really upset with Adobe, my Photoshop has been working improperly for almost 2 weeks now. Adobe accessed my computer last week and now MY COMPUTER is not working Properly. I NEED ALL OF THIS FIXED IMMEDIATELY PLEASE!!!!!!
DO NOT withdraw this support topic. Please get a Manager to address this issue ASAP!!!!!!
If anyone reading this can get me through to the right person I would appreciate it. Hopefully Adobe will make reparation for all the trouble caused and time lost!
I should add that last night I tried to contact Adobe to see what the hold up was. I went and tried to open up the case file (No it had not been withdrawn and was still active), but it would not open. So, I started up a new support file with a whole new case number, I received an email this morning from Adobe saying that I would have to communicate with them through the original case #. Went to respond to this email today and the NEW case file had been withdrawn.
Yes, I have read all the user forums on this stuff for months, NO I am not using any Anti Virus stuff, No I did not upgrade my Macs at the time of the prob appearing! Thanks
3. Jan 26, 2011 6:55 PM in response to: Charlie.D
Re: Cannot open file, Photoshop is not compatible with this version of photoshop. 2 weeks
Thanks so Much Charlie. Could you get someone from Tech Support to contact me via email with a return address. I really feel this needs to be escalated to Management now. ThanksHere some info about my hw /sw / diag
If you need more, please ask me.
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 1 MB
Memory: 2.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.7f1
Software:
System Software Overview:
System Version: Mac OS X 10.4.11 (8S165)
Kernel Version: Darwin 8.11.0
Diagnostics:
Power On Self-Test:
Last Run: 06/05/11 15:14
Result: Passed
Applications:
AASync:
Version: 1.2.5.1
Last Modified: 03/05/07 16:42
Kind: Universal
Get Info String: AASync version 1.2.5.1, Copyright 2005-2006 Robert Vasvari.
Location: /Applications/AASync.app
Acrobat.com:
Version: 1.2.443
Last Modified: 16/07/09 12:20
Kind: Universal
Get Info String: 1.2.443, 08/06/2008 14:56
Location: /Applications/Adobe/Acrobat.com.app
Acrobat Distiller:
Version: 9.4.2
Last Modified: 16/07/09 12:22
Kind: Universal
Get Info String: Acrobat Distiller™ 9.4.2, ©COPYRIGHT_YEAR_FROM-2010 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/Adobe Acrobat 9 Pro/Acrobat Distiller.app
Acrobat Uninstaller:
Version: Acrobat Uninstaller version 9.4.4
Last Modified: 16/07/09 12:24
Kind: Universal
Get Info String: Acrobat Uninstaller version 9.4.4, Copyright © 2004-2011 by Adobe Systems, Incorporated. All rights reserved.
Location: /Applications/Adobe Acrobat 9 Pro/Acrobat Uninstaller.app
Adobe Acrobat Pro:
Version: 9.4.4
Last Modified: 08/02/11 08:57
Kind: Universal
Get Info String: Adobe® Acrobat® 9.4.4, ©1984-2010 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app
Bridge:
Version: 1.0.4.6
Last Modified: 23/05/06 22:54
Kind: PowerPC
Get Info String: 1.0.4.6 (104504), Copyright 2003-2005, Adobe
Location: /Applications/Adobe Bridge/Bridge.app
Bridge CS3:
Version: 2.1.1.9
Last Modified: 14/03/08 15:48
Kind: Universal
Get Info String: 2.1.1.9 (124992), Copyright 2003-2007, Adobe Systems, Inc.
Location: /Applications/Adobe Bridge CS3/Bridge CS3.app
Adobe Bridge CS4:
Version: 3.0.0.464
Last Modified: 16/07/09 12:17
Kind: Universal
Get Info String: 3.0.0.464 (144651), Copyright 2003-2007, Adobe Systems, Inc.
Location: /Applications/Adobe Bridge CS4/Adobe Bridge CS4.app
Device Central:
Version: 1.1.0
Last Modified: 14/03/08 16:11
Kind: Universal
Location: /Applications/Adobe Device Central CS3/Device Central.app
Device Central:
Version: 2.1.0
Last Modified: 16/07/09 12:17
Kind: Universal
Get Info String: 2.1.0, Copyright © 2007-2008 Adobe Systems Incorporated
Location: /Applications/Adobe Device Central CS4/Device Central.app
Extension Manager:
Version: "2.1.0.115" © 2000-2008 Adobe Systems Incorporated
Last Modified: 16/07/09 12:12
Kind: Universal
Get Info String: "2.1.0.115" © 2000-2008 Adobe Systems Inc.
Location: /Applications/Adobe Extension Manager CS4/Adobe Extension Manager CS4.app
Adobe Flash CS4:
Version: 10.0.2.566
Last Modified: 22/02/10 17:33
Kind: Universal
Get Info String: 10.0.2.566, Copyright © 1993-2008 Adobe Systems Incorporated
Location: /Applications/Adobe Flash CS4/Adobe Flash CS4.app
Flash Player:
Version: 10.0.22.87
Last Modified: 22/02/10 17:33
Kind: Native (Preferred) or Classic
Get Info String: Adobe Flash Player 10.0 r22 Copyright (c) 1996-2009 Adobe Macromedia Software LLC. All rights reserved
Location: /Applications/Adobe Flash CS4/Players/Debug/Flash Player.app
Flash Player:
Version: 10.0.22.87
Last Modified: 22/02/10 17:33
Kind: Native (Preferred) or Classic
Get Info String: Adobe Flash Player 10.0 r22 Copyright (c) 1996-2009 Adobe Macromedia Software LLC. All rights reserved
Location: /Applications/Adobe Flash CS4/Players/Flash Player.app
Flash Player:
Version: 10.0.22.87
Last Modified: 22/02/10 17:33
Kind: Native (Preferred) or Classic
Get Info String: Adobe Flash Player 10.0 r22 Copyright (c) 1996-2009 Adobe Macromedia Software LLC. All rights reserved
Location: /Applications/Adobe Flash CS4/Players/Release/Flash Player.app
Adobe Help Center:
Version: Adobe Help Center 1.0.2.44
Last Modified: 08/05/06 19:10
Kind: PowerPC
Get Info String: Adobe Help Center 1.0.2.44 (C) 2005 Adobe Systems, Inc. All rights reserved.
Location: /Applications/Adobe Help Center.app
Adobe Help Viewer 1.0:
Version: 1.0
Last Modified: 05/11/07 10:13
Kind: Universal
Get Info String: 1.0.0.185
Location: /Applications/Adobe Help Viewer 1.0.app
Adobe Help Viewer 1.1:
Version: 1.1
Last Modified: 05/11/07 10:04
Kind: Universal
Get Info String: 1.1.0.143
Location: /Applications/Adobe Help Viewer 1.1.app
Illustrator:
Version: 12.0.0
Last Modified: 08/05/06 19:29
Kind: PowerPC
Get Info String: 12.0.0, Copyright © 1987-2005 Adobe Systems Inc. All rights reserved.
Location: /Applications/Adobe Illustrator CS2/Adobe Illustrator.app
Analyze Documents:
Last Modified: 08/05/06 19:29
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
Make Calendar:
Last Modified: 08/05/06 19:29
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
Collect for Output:
Last Modified: 08/05/06 19:29
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
Contact Sheets:
Last Modified: 08/05/06 19:29
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
Dataset Batch PDF from Text:
Last Modified: 08/05/06 19:29
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Datasets.localized/Dataset Batch PDF from Text.app
Export Flash Animation:
Last Modified: 08/05/06 19:29
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
Web Gallery:
Last Modified: 08/05/06 19:29
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
Illustrator:
Version: 13.0.1
Last Modified: 05/11/07 10:16
Kind: Universal
Get Info String: 13.0.1, Copyright © 1987-2007 Adobe Systems Inc. All rights reserved.
Location: /Applications/Adobe Illustrator CS3/Adobe Illustrator.app
Analyze Documents:
Last Modified: 05/11/07 10:16
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
Make Calendar:
Last Modified: 05/11/07 10:16
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
Collect for Output:
Last Modified: 05/11/07 10:16
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
Contact Sheets:
Last Modified: 05/11/07 10:16
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
Export Flash Animation:
Last Modified: 05/11/07 10:16
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
Web Gallery:
Last Modified: 05/11/07 10:16
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
Illustrator:
Version: 367
Last Modified: 16/07/09 12:30
Kind: Universal
Get Info String: 14.0.0, Copyright © 1987-2008 Adobe Systems Inc. All rights reserved.
Location: /Applications/Adobe Illustrator CS4/Adobe Illustrator.app
Analyze Documents:
Last Modified: 16/07/09 12:30
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS4/Scripting.localized/Sample Scripts.localized/AppleScript.localized/Analyze Documents.localized/Analyze Documents.app
Make Calendar:
Last Modified: 16/07/09 12:30
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS4/Scripting.localized/Sample Scripts.localized/AppleScript.localized/Calendar.localized/Make Calendar.app
Contact Sheets:
Last Modified: 16/07/09 12:30
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS4/Scripting.localized/Sample Scripts.localized/AppleScript.localized/Contact Sheet Demo.localized/Contact Sheets.app
Export Flash Animation:
Last Modified: 16/07/09 12:30
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS4/Scripting.localized/Sample Scripts.localized/AppleScript.localized/Export Flash Animation.localized/Export Flash Animation.app
Web Gallery:
Last Modified: 16/07/09 12:30
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Illustrator CS4/Scripting.localized/Sample Scripts.localized/AppleScript.localized/Web Gallery.localized/Web Gallery.app
Adobe InDesign CS2:
Version: 4.0.2.633
Last Modified: 08/05/06 19:24
Kind: PowerPC
Get Info String: 4.0.2, Copyright 2000-2005 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/Adobe InDesign CS2/Adobe InDesign CS2.app
Adobe InDesign CS3:
Version: 5.0.4.682
Last Modified: 28/10/08 09:32
Kind: Universal
Get Info String: 5.0.4, Copyright 2000-2008 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/Adobe InDesign CS3/Adobe InDesign CS3.app
Adobe InDesign CS4:
Version: 6.0.6.622
Last Modified: 16/07/09 12:36
Kind: Universal
Get Info String: 6.0.6, Copyright 2000-2009 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/Adobe InDesign CS4/Adobe InDesign CS4.app
Adobe Media Encoder CS4:
Version: 4.2
Last Modified: 22/02/10 17:32
Kind: Universal
Get Info String: 4.2.0, Copyright 2002-2009 Adobe Systems Incorporated
Location: /Applications/Adobe Media Encoder CS4/Adobe Media Encoder CS4.app
Setup:
Version: 2.0.131.0
Last Modified: 22/02/10 17:32
Kind: Universal
Get Info String: 2.0.131.0, Copyright © 2005-2008 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/Adobe Media Encoder CS4/PCI/AMEImporters/Setup.app
Adobe Media Player:
Version: 1.1
Last Modified: 16/07/09 12:15
Kind: Universal
Get Info String: 1.1,
Location: /Applications/Adobe Media Player.app
Adobe ImageReady CS2:
Version: 9.0x246
Last Modified: 08/05/06 19:13
Kind: PowerPC
Get Info String: 9.0x246, Copyright © 1998-2005 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS2/Adobe ImageReady CS2.app
Adobe Photoshop CS2:
Version: 9.0.1 (9.0.1x294)
Last Modified: 23/05/06 22:58
Kind: PowerPC
Get Info String: 9.0.1 (9.0.1x294), Copyright ©1990-2005 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS2/Adobe Photoshop CS2.app
Crea GIF (128 colori):
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Crea GIF (128 colori).exe
Crea GIF (32, senza dithering):
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Crea GIF (32, senza dithering).exe
Crea GIF (64 colori):
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Crea GIF (64 colori).exe
Crea JPEG (qualità 10):
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Crea JPEG (qualità 10).exe
Crea JPEG (qualità 30):
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Crea JPEG (qualità 30).exe
Crea JPEG (qualità 60):
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Crea JPEG (qualità 60).exe
Crea pulsante:
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Crea pulsante.exe
Mantieni 350, Crea JPG 30:
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Mantieni 350, Crea JPG 30.exe
Mantieni a 200x200 pixel:
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Mantieni a 200x200 pixel.exe
Mantieni a 64X64 pixel:
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Mantieni a 64X64 pixel.exe
Maschera di contrasto:
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Maschera di contrasto.exe
Miniatura diapo metallo:
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Miniatura diapo metallo.exe
Miniatura diapo:
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Miniatura diapo.exe
Miniatura rett arrotondato:
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Miniatura rett arrotondato.exe
Salvat. a più dimensioni:
Last Modified: 11/05/05 22:19
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di ImageReady/Salvat. a più dimensioni.exe
Cornice ombreggiata:
Version: 9.0
Last Modified: 11/05/05 15:14
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di Photoshop/Cornice ombreggiata.exe
Crea pulsante:
Version: 9.0
Last Modified: 11/05/05 15:14
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di Photoshop/Crea pulsante.exe
Crea tonalità seppia:
Version: 9.0
Last Modified: 11/05/05 15:14
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di Photoshop/Crea tonalità seppia.exe
Foto invecchiata:
Version: 9.0
Last Modified: 11/05/05 15:14
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di Photoshop/Foto invecchiata.exe
Mantieni a 300 pixel:
Version: 9.0
Last Modified: 11/05/05 15:14
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di Photoshop/Mantieni a 300 pixel.exe
Mantieni a 64 pixel:
Version: 9.0
Last Modified: 11/05/05 15:14
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di Photoshop/Mantieni a 64 pixel.exe
Mod metodo condizionale:
Version: 9.0
Last Modified: 11/05/05 15:14
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di Photoshop/Mod metodo condizionale.exe
Salva come JPEG media:
Version: 9.0
Last Modified: 11/05/05 15:14
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di Photoshop/Salva come JPEG media.exe
Salva come Photoshop PDF:
Version: 9.0
Last Modified: 11/05/05 15:14
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS2/Esempi/Droplet/Droplet di Photoshop/Salva come Photoshop PDF.exe
Adobe Photoshop CS3:
Version: 10.0.1 (10.0.1x20071012 [20071012.r.1644 2007/10/12:09:30:00 cutoff; r branch])
Last Modified: 14/03/08 15:47
Kind: Universal
Get Info String: 10.0.1 (10.0.1x20071012 [20071012.r.1644 2007/10/12:09:30:00 cutoff; r branch]) © 1990-2007 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS3/Adobe Photoshop CS3.app
Adobe Photoshop CS4:
Version: 11.0.2 (11.0.2x20100519 [20100519.r.592 2010/05/19:02:00:00 cutoff; r branch])
Last Modified: 16/07/09 12:32
Kind: Universal
Get Info String: 11.0.2 (11.0.2x20100519 [20100519.r.592 2010/05/19:02:00:00 cutoff; r branch]) © 1990-2010 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app
Adobe Stock Photos CS3:
Version: Adobe Stock Photos 1.5.0.466
Last Modified: 05/11/07 10:04
Kind: Universal
Get Info String: Adobe Stock Photos 1.5.0.466 (C) 2005 Adobe Systems, Inc. All rights reserved.
Location: /Applications/Adobe Stock Photos CS3/Adobe Stock Photos CS3.app
Adobe Stock Photos:
Last Modified: 23/11/05 19:07
Kind: Native (Preferred) or Classic
Location: /Applications/Adobe Stock Photos.app
VersionCueCS2:
Version: 2.0
Last Modified: 08/05/06 19:21
Kind: PowerPC
Get Info String: 2.0, Copyright ©2001-2004 Adobe Systems Incorporated
Location: /Applications/Adobe Version Cue CS2/bin/VersionCueCS2.app
VersionCueCS2Status:
Version: 1.0.0
Last Modified: 08/05/06 19:21
Kind: PowerPC
Location: /Applications/Adobe Version Cue CS2/bin/VersionCueCS2Status.app
VC2Native:
Version: 2.0
Last Modified: 08/05/06 19:21
Get Info String: 2.0.0, © 2003-2004 Adobe Systems Incorporated
Location: /Applications/Adobe Version Cue CS2/plugins/com.adobe.versioncue.nativecomm_2.0.0/res/macosx/VC2Native.app
Uninstall Version Cue CS2:
Version: 0.1
Last Modified: 08/05/06 19:21
Kind: PowerPC
Location: /Applications/Adobe Version Cue CS2/Uninstall Version Cue CS2.app
Agamik Barcode Identifier:
Version: 0.1
Last Modified: 04/02/08 22:11
Kind: PowerPC
Location: /Applications/Agamik barcode/Agamik BarCode Identifier.app
Agamik BarCoder:
Version: 4.38
Last Modified: 31/12/09 15:18
Kind: Universal
Location: /Applications/Agamik barcode/Agamik BarCoder 4.38.app
aMSN:
Version: 0.97
Last Modified: 21/09/07 22:40
Kind: Universal
Get Info String: aMSN 0.97
TclTk 8.4.16
Location: /Applications/aMSN.app
AppleScript Utility:
Version: 1.0
Last Modified: 05/10/05 10:51
Kind: PowerPC
Location: /Applications/AppleScript/AppleScript Utility.app
Folder Actions Setup:
Version: 1.1
Last Modified: 05/10/05 10:51
Kind: PowerPC
Location: /Applications/AppleScript/Folder Actions Setup.app
Script Editor:
Version: 2.1.2
Last Modified: 22/12/09 10:24
Kind: PowerPC
Get Info String: Script Editor 2.1.1
Location: /Applications/AppleScript/Script Editor.app
Art Directors Toolkit:
Version: 4.2
Last Modified: 05/10/05 10:53
Kind: PowerPC
Get Info String: 4.2 (v29), Copyright 2001-2005 Code Line Communications
Location: /Applications/Art Directors Toolkit 4/Art Directors Toolkit.app
Automator:
Version: 1.0.5
Last Modified: 07/12/07 09:19
Kind: PowerPC
Get Info String: Automator version 1.0.5, Copyright 2004-2007 Apple Computer, Inc.
Location: /Applications/Automator.app
Bar Code Pro:
Version: Bar Code Pro version 6.1.2
Last Modified: 24/09/08 12:45
Kind: Native (Preferred) or Classic
Get Info String: Bar Code Pro version 6.1.2, Copyright Bar Code Pro 2008 by SNX Software Inc. All rights reserved.
Location: /Applications/Bar Code Pro 6.14 Demo/Bar Code Pro.app
BCP6Converter:
Version: version 1.01
Last Modified: 12/05/04 10:58
Kind: Classic
Get Info String: version 1.01 © 2004 SNX. All rights reserved.
Location: /Applications/Bar Code Pro 6.14 Demo/Bar Code Utilities/BCP6Converter
BarcodeGenerator:
Version: 2.4
Last Modified: 23/12/07 11:48
Kind: PowerPC
Get Info String: V2.4 (16.01.2005)
Location: /Applications/Barcode Generator Eval/BarcodeGenerator.app
barCodeCreator:
Version: 1.1
Last Modified: 14/11/02 16:35
Kind: PowerPC
Location: /Applications/barCodeCreator.app
Calculator:
Version: 4.0.6
Last Modified: 07/12/07 09:19
Kind: PowerPC
Get Info String: 4.0.6
Location: /Applications/Calculator.app
Carbon Copy Cloner:
Version: 3.3
Last Modified: 23/09/09 03:41
Kind: Universal
Get Info String: Carbon Copy Cloner version 3.3, Copyright 2002-2009 Mike Bombich.
Location: /Applications/Carbon Copy Cloner.app
CDFinder:
Version: 4.6
Last Modified: 16/05/06 11:30
Kind: Universal
Get Info String: 4.6, Copyright 1995-2006 Norbert M. Doerner, wfs
Location: /Applications/CDFinder 4.6/CDFinder.app
Installer:
Last Modified: 15/05/06 16:06
Kind: Native (Preferred) or Classic
Location: /Applications/CDFinder 4.6/Extras/CDFinder CMM/Mac OS X/Installer.app
Update in CDFinder & Eject X:
Last Modified: 07/04/05 10:29
Kind: Native (Preferred) or Classic
Location: /Applications/CDFinder 4.6/Extras/Update in CDFinder & Eject X.app
Incremental:
Version: 03
Last Modified: 16/05/06 11:30
Kind: PowerPC
Location: /Applications/CDFinder 4.6/Scripts/Incrémental (Find New Files)/Incremental.app
Chess:
Version: 2.1
Last Modified: 05/10/05 10:51
Kind: PowerPC
Get Info String: Chess version 2.1, Copyright 2003-2004 Apple Computer, Inc.
Location: /Applications/Chess.app
Dashboard:
Version: 1.0
Last Modified: 07/12/07 09:19
Kind: PowerPC
Location: /Applications/Dashboard.app
Dictionary:
Version: 1.0.2
Last Modified: 07/12/07 09:19
Kind: PowerPC
Location: /Applications/Dictionary.app
Dropbox:
Version: Dropbox 1.0.28
Last Modified: 27/01/11 07:16
Kind: Universal
Location: /Applications/Dropbox.app
DVD Player:
Visible: Yes
Identifier: com.apple.preference.general
Location: /System/Library/PreferencePanes/Appearance.prefPane
Bluetooth:
Version: 1.9.5
Supported by: Apple
Visible: No
Identifier: com.apple.preferences.Bluetooth
Location: /System/Library/PreferencePanes/Bluetooth.prefPane
CDs & DVDs:
Version: 1.4
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.digihub.discs
Location: /System/Library/PreferencePanes/DigiHubDiscs.prefPane
Classic:
Version: 1.1
Supported by: Apple
Visible: No
Identifier: com.apple.preference.classic
Location: /System/Library/PreferencePanes/Classic.prefPane
Dashboard & Exposé:
Version: 1.1.1
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.expose
Location: /System/Library/PreferencePanes/Expose.prefPane
Date & Time:
Version: 2.2
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.datetime
Location: /System/Library/PreferencePanes/DateAndTime.prefPane
Desktop & Screen Saver:
Version: 1.3.2
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.desktopscreeneffect
Location: /System/Library/PreferencePanes/DesktopScreenEffectsPref.prefPane
Displays:
Version: 2.1.1
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.displays
Location: /System/Library/PreferencePanes/Displays.prefPane
Dock:
Version: 1.4
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.dock
Location: /System/Library/PreferencePanes/Dock.prefPane
Energy Saver:
Version: 3.1
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.energysaver
Location: /System/Library/PreferencePanes/EnergySaver.prefPane
Growl:
Version: 1.1.6
Supported by: 3rd Party
Visible: Yes
Identifier: com.growl.prefpanel
Location: /Users/admin/Library/PreferencePanes/Growl.prefPane
Ink:
Version: 1.2
Supported by: Apple
Visible: No
Identifier: com.apple.preference.ink
Location: /System/Library/PreferencePanes/Ink.prefPane
International:
Version: 1.2.1
Supported by: Apple
Visible: Yes
Identifier: com.apple.Localization
Location: /System/Library/PreferencePanes/Localization.prefPane
Keyboard & Mouse:
Version: 3.2
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.keyboard
Location: /System/Library/PreferencePanes/Keyboard.prefPane
Network:
Version: 1.7
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.network
Location: /System/Library/PreferencePanes/Network.prefPane
Print & Fax:
Version: 2.0
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.printfax
Location: /System/Library/PreferencePanes/PrintAndFax.prefPane
QuickTime:
Version: 7.4
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.quicktime
Location: /System/Library/PreferencePanes/QuickTime.prefPane
Security:
Version: 1.2.1
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.security
Location: /System/Library/PreferencePanes/Security.prefPane
Sharing:
Version: 1.4.4
Supported by: Apple
Visible: Yes
Identifier: com.apple.preferences.sharing
Location: /System/Library/PreferencePanes/SharingPref.prefPane
Software Update:
Version: 2.0
Supported by: Apple
Visible: Yes
Identifier: com.apple.preferences.softwareupdate
Location: /System/Library/PreferencePanes/SoftwareUpdate.prefPane
Sound:
Version: 2.3.1
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.sound
Location: /System/Library/PreferencePanes/Sound.prefPane
Speech:
Version: 3.3
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.speech
Location: /System/Library/PreferencePanes/Speech.prefPane
Spotlight:
Version: 1.1
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.spotlight
Location: /System/Library/PreferencePanes/Spotlight.prefPane
Startup Disk:
Version: 10.4
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.startupdisk
Location: /System/Library/PreferencePanes/StartupDisk.prefPane
StuffIt AVR:
Version: 10.0.1
Supported by: 3rd Party
Visible: Yes
Identifier: com.stuffit.prefs.AVR
Location: /Library/PreferencePanes/StuffIt AVR.prefPane
Universal Access:
Version: 2.4
Supported by: Apple
Visible: Yes
Identifier: com.apple.preference.universalaccess
Location: /System/Library/PreferencePanes/UniversalAccessPref.prefPane
Startup Items:
Apache:
Description: Apache web server
Location: /System/Library/StartupItems/Apache
Provides: Web Server
Uses: Disks, NFS
AppleShare:
Description: Apple File Service
Location: /System/Library/StartupItems/AppleShare
Provides: Apple File Service
Requires: Disks
AppServices:
Description: application services
Location: /System/Library/StartupItems/AppServices
Provides: Core Services
AuthServer:
Description: authentication service
Location: /System/Library/StartupItems/AuthServer
Provides: TIM
CrashReporter:
Description: crash reporter
Location: /System/Library/StartupItems/CrashReporter
Provides: Crash Reporter
Messages:
Start: Starting crash reporter
Stop: Stopping crash reporter
Order Preference: Early
Disks:
Description: local disks
Location: /System/Library/StartupItems/Disks
Provides: Disks
Requires: SecurityServer
Uses: System Tuning
FibreChannel:
Description: fibrechannel
Location: /System/Library/StartupItems/FibreChannel
Provides: FibreChannel
Requires: SecurityServer
Order Preference: Early
IFCStart:
Description: IFC
Location: /System/Library/StartupItems/IFCStart
Provides: IFC
Messages:
Start: Building international caches
Stop: Stopping build of international caches
Order Preference: Last
IPServices:
Description: Internet services
Location: /System/Library/StartupItems/IPServices
Provides: Super Server, Config Server
Uses: mDNSResponder, Portmap
Metadata:
Description: Metadata Server
Location: /System/Library/StartupItems/Metadata
Provides: Metadata Server
Requires: Core Services, Disks
NetworkTime:
Description: network time synchronization
Location: /System/Library/StartupItems/NetworkTime
Provides: Network Time
NFS:
Description: network file system
Location: /System/Library/StartupItems/NFS
Provides: NFS
Uses: Disks
NIS:
Description: Network Information Service
Location: /System/Library/StartupItems/NIS
Provides: NIS
PrintingServices:
Description: Printing Services
Location: /System/Library/StartupItems/PrintingServices
Provides: PrintingServices
Requires: Resolver
Uses: Network Time
Order Preference: Late
RemoteDesktopAgent:
Description: Remote Desktop
Location: /System/Library/StartupItems/RemoteDesktopAgent
Provides: Remote Desktop
Requires: Disks, Resolver
Messages:
Start: Starting Remote Desktop Agent
Stop: Stopping Remote Desktop Agent
Order Preference: Last
SNMP:
Description: SNMP server
Location: /System/Library/StartupItems/SNMP
Provides: SNMP
Requires: Resolver
Messages:
Start: Starting SNMP service
Stop: Stopping SNMP service
Order Preference: None
AdobeVersionCueCS2:
Description: Adobe Version Cue CS2
Location: /Library/StartupItems/AdobeVersionCueCS2
Provides: AdobeVersionCueCS2
Requires: Disks
Uses: mDNSResponder
Messages:
Start: Starting Adobe Version Cue CS2
Stop: Stopping Adobe Version Cue CS2
FTDIReEnumerate:
Description: FTDI ReEnumerate Device
Location: /Library/StartupItems/FTDIReEnumerate
Provides: FTDIReEnumerate
Messages:
Start: Starting FTDI ReEnumerate
Stop: Stopping FTDI ReEnumerate
Order Preference: None
ProTec6b:
Description: Nalpeiron Copy Protection 6b
Location: /Library/StartupItems/ProTec6b
Provides: Nalpeiron Copy Protection 6b
Messages:
Start: Starting Nalpeiron Daemon 6b
Stop: Stopping Nalpeiron Daemon 6b
Order Preference: Early
RetroRun:
Description: Retrospect Startup Helper
Location: /Library/StartupItems/RetroRun
Provides: Retrospect Startup Services
Messages:
Start: Starting Retrospect Startup Helper
Stop: Stopping Retrospect Startup Helper
Order Preference: Last -
The saved printer information is not compatible with this version of Photoshop
Hello,
I hope somebody can help us. I am a IT Technician in a school, we have approx 500 Windows 7 64bit machines with about 600/700 users - 200 machines have the CS5.5 Master Collection installed on them. We have an intermittent issue with printing from Photoshop (both the 32bit and 64bit versions). Our printers are mostly HP LaserJet printers (all modern), but we have an Epson B-510DN Inkjet and some Xerox copiers too. The drivers are all installed on a central print server running Server 2008 R2 and shared via Group Policy to client machines.
In rooms where Photoshop is installed, intermittently when a student goes to print we will recieve the following error:
The saved printer information is not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before printing.
Photoshop will then grey out the 'Print' button and won't let the user print again. The odd thing is that we can still print from other software such as Microsoft Word or even non Microsoft software - even Illustrator will print. It just seems to be Photoshop thats has any issues.
This happens when printing to any printer on site, 90% of which are HP's. As a general rule we configure all of our HP printers with HP's PCL6 Universal Print Driver as it makes management of various printer models easy, and we haven't found it to limit us atall yet. We are aware the Adobe software is 'preferential' to Postscript drivers but our printers arn't, being HP's PCL is their native language. We have tried changing a printer to the Postscript UPD driver to test it but it made no improvement. We have also seen the issue quite indepth with our Epson B-510DN which is configured with Epson's latest model specific driver as our photography department use it. Since we are seeing it with different printers I don't believe the printer drivers are to blame - unless somebody want's to prove me wrong.
Like I say the problem is intermittent, and we are having trouble tracing it down to a user, computer or a software problem as it is so intermittent. Has anybody else seen this and managed to overcome it? Since it's only happening in Photoshop is it a bug that Adobe have recognosed and fixed in CS6? The only workaround we have found for it is to go into printers, chnage the defualt printer from one to another and back again - this seems to shut Photoshop up.
Thanks, Dave.Chris,
Apologies for my slow reply - we have been busy here the past few weeks.
We are using a standard Microsoft provided JPG image (Tulips.jpg) so we have ruled out it being an issue with the image; perhaps if we were using a PSD, maybe so.
We have now found out what the issue is, and what the workaround for this bug is. All of our printers across our site are named in a specific format, usually [Location name] [Room number] [Mono or Colour] resulting in printer names such as Photography A11 Colour, Art A2B Colour and Design Technology A14 Colour. All of these names contain numbers. We have tried reimaging machines, reinstalling Photoshop, upgrading to CS6, deleting and reconfiguring printers with the same name. Finally the only solution that worked was to take the numbers out of the name, either by renaming or deleting and reconfiguring the printers. The Photography printer is an Epson B-510DN using a model specific driver and the other two use the HP PCL6 UPD driver, so I don't believe the drivers are to blame and since renaming the printers work I don't believe it's a configuration issue either. Remember that these printers are shared from a print server and deployed via Group Policy (using the Print Management method).
I hope this provides you Chris, and others searching Google, a useful explanation of the problem and what the fix is. As much as Adobe won't admit it's a problem/bug, I and many others across the internet believe that it is and that it should be fixed in future versions of Photoshop.
Thanks, Dave. -
Service Registry error while starting after configuring with DB2 database
Hi
I installed WLS 9.1 / ALSR 2.1 on RedHat Linux 4 EL.And DB2 8.2 FP12
It was started fine with the default HSQL database, after changing the database to DB2 and restarted the server, I am getting the following errors
Any one know about this ..please help me. Seems it was alredy posted on forums.bea.com but those threads are not accessioble now.Appriciate any quick response
error log - I also checked the account_list.xml file it looks fine.
JAVA Memory arguments: -Xms2048m -Xmx2048m -XX:MaxPermSize=128m
WLS Start Mode=Production
CLASSPATH=:/opt/bea/bea91/patch_weblogic910/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bea/Java5/jdk1.5.0_17/lib/tools.jar:/opt/bea/bea91/weblogic91/server/lib/weblogic_sp.jar:/opt/bea/bea91/weblogic91/server/lib/weblogic.jar:/opt/bea/bea91/weblogic91/server/lib/webservices.jar::/opt/bea/bea91/weblogic91/common/eval/pointbase/lib/pbclient51.jar:/opt/bea/bea91/weblogic91/server/lib/xqrl.jar::/opt/bea/bea91/weblogic91/integration/lib/util.jar:
PATH=/opt/bea/bea91/weblogic91/server/bin:/opt/bea/Java5/jdk1.5.0_17/jre/bin:/opt/bea/Java5/jdk1.5.0_17/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/weblogic/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.5.0_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_17-b04)
Java HotSpot(TM) Server VM (build 1.5.0_17-b04, mixed mode)
Starting WLS with line:
/opt/bea/Java5/jdk1.5.0_17/bin/java -server -Xms2048m -Xmx2048m -XX:MaxPermSize=128m -da -Dplatform.home=/opt/bea/bea91/weblogic91 -Dwls.home=/opt/bea/bea91/weblogic91/server -Dwli.home=/opt/bea/bea91/weblogic91/integration -Dweblogic.management.discover=true -Dweblogic.ProductionModeEnabled=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Djava.security.auth.login.config=/opt/bea/bea91/alsr21/conf/jaas.config -Dweblogic.ext.dirs=/opt/bea/bea91/patch_weblogic910/profiles/default/sysext_manifest_classpath -Dweblogic.Name=zsoaLAALSRAdminServer -Djava.security.policy=/opt/bea/bea91/weblogic91/server/lib/weblogic.policy weblogic.Server
<Dec 23, 2008 11:02:49 AM PST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/lib/db2jcc2.jar:/opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/lib/db2jcc_license_cu2.jar>
<Dec 23, 2008 11:02:49 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 1.5.0_17-b04 from Sun Microsystems Inc.>
<Dec 23, 2008 11:02:50 AM PST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.1 Mon Dec 12 19:26:33 EST 2005 689178 >
<Dec 23, 2008 11:02:53 AM PST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /opt/bea/bea91/license.bea>
<Dec 23, 2008 11:02:53 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 23, 2008 11:02:53 AM PST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Dec 23, 2008 11:02:53 AM PST> <Notice> <Log Management> <BEA-170019> <The server log file /opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/servers/zsoaLAALSRAdminServer/logs/zsoaLAALSRAdminServer.log is opened. All server side log events will be written to this file.>
<Dec 23, 2008 11:02:53 AM PST> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that libmuxer library is in :'/opt/bea/Java5/jdk1.5.0_17/jre/lib/i386/server:/opt/bea/Java5/jdk1.5.0_17/jre/lib/i386:/opt/bea/Java5/jdk1.5.0_17/jre/../lib/i386:/opt/bea/bea91/patch_weblogic910/profiles/default/native:/opt/bea/bea91/weblogic91/server/native/linux/x86_64:/opt/bea/bea91/weblogic91/server/native/linux/x86_64/oci920_8'
>
<Dec 23, 2008 11:02:54 AM PST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Dec 23, 2008 11:02:56 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Dec 23, 2008 11:02:56 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
INFO: com.systinet.wasp.WaspImpl - Starting Systinet Server for Java/6.0 (Java/1.5.0_17; Linux/2.6.9-78.0.1.ELsmp; build SSJ-6.0-20060622-1136)
INFO: com.systinet.wasp.monitoring.LogEventModule - Starting event management
INFO: log4j.Log4JAdapter - Events Log File: /opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/servers/zsoaLAALSRAdminServer/tmp/_WL_user/registry/4rin9e/public/systinetRegistry_logEvents.log
INFO: log4j.Log4JAdapter - Error Events Log File: /opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/servers/zsoaLAALSRAdminServer/tmp/_WL_user/registry/4rin9e/public/systinetRegistry_errorEvents.log
INFO: com.idoox.config.xml.ConfigStore - Starting configStore with savingPeriod 2000
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/core_services_client][core_services_client][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/builtin_serialization][builtin_serialization][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/security_providers][security_providers][1.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/uddi/redirect/5.0][uddi-redirect][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/wasp/app/uddi/6.0][UDDI-services][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/statistics/5.0][Statistics-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/xslt2uddi/v3/5.5][UDDIClient-xslt2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/api/ext/5.0][UDDIClient-ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval_production/5.0][Approval-production-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v3/5.5][UDDIClient-wsdl2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval_management/5.0][Approval-management-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/configuratorCluster/5.0][Configurator-cluster-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/replication/v3/5.0][Replication-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/subscription/listener/v3/5.0][UDDIClient-subscription-listener-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval/5.0][Approval-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.5][Taxonomy-client-v31][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/inquiryUI/6.0][UDDIClient-v3-ui][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/validate-values/v1/5.0][UDDIClient-validate-values-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/custody/v3/5.0][UDDIClient-custody-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/subscription/v3/ext/6.0][UDDIClient-subscription-v3-ext][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/administrationUtils/5.5][AdministrationUtils-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/wasp/app/bsc/web/6.0][bsc][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/transformer_kr/5.5][Transformer-kr-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v3/5.0][UDDIClient-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v2/5.0][UDDIClient-wsdl2uddi-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/validate-values/v2/5.0][UDDIClient-validate-values-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v3_ext/5.0][UDDIClient-v3_ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/xml2uddi/v3/5.5][UDDIClient-xml2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/value-set-caching/v3/5.0][UDDIClient-value-set-caching-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/xsd2uddi/v3/5.5][UDDIClient-xsd2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/wasp/app/uddi/web/6.0][UDDI-web][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval_checker/5.0][Approval-checker-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/category/v3/5.5][Category-client-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/group/5.5][Group-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/subscription/v3/5.0][UDDIClient-subscription-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v2/5.0][UDDIClient-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/configurator/5.0][Configurator-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/permission/5.5][Permission-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.0][Taxonomy-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v1/5.0][UDDIClient-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/account/5.5][Account-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/value-set-validation/v3/5.0][UDDIClient-value-set-validation-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client-core/5.0][Client-core][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/core_services_client][core_services_client][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/builtin_serialization][builtin_serialization][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/uddi/redirect/5.0][uddi-redirect][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/security_providers][security_providers][1.0]
INFO: com.idoox.wasp.security.server.SecurityModule - SecurityModule starts.
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client-core/5.0][Client-core][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/statistics/5.0][Statistics-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval_management/5.0][Approval-management-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/replication/v3/5.0][Replication-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/transformer_kr/5.5][Transformer-kr-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v3/5.0][UDDIClient-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v2/5.0][UDDIClient-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/configurator/5.0][Configurator-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v1/5.0][UDDIClient-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/account/5.5][Account-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/xslt2uddi/v3/5.5][UDDIClient-xslt2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/api/ext/5.0][UDDIClient-ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v3/5.5][UDDIClient-wsdl2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/inquiryUI/6.0][UDDIClient-v3-ui][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/custody/v3/5.0][UDDIClient-custody-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/administrationUtils/5.5][AdministrationUtils-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v3_ext/5.0][UDDIClient-v3_ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/xml2uddi/v3/5.5][UDDIClient-xml2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/value-set-caching/v3/5.0][UDDIClient-value-set-caching-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/xsd2uddi/v3/5.5][UDDIClient-xsd2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/category/v3/5.5][Category-client-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/subscription/v3/5.0][UDDIClient-subscription-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.0][Taxonomy-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/value-set-validation/v3/5.0][UDDIClient-value-set-validation-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval/5.0][Approval-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v2/5.0][UDDIClient-wsdl2uddi-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/validate-values/v2/5.0][UDDIClient-validate-values-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/configuratorCluster/5.0][Configurator-cluster-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/validate-values/v1/5.0][UDDIClient-validate-values-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/group/5.5][Group-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/permission/5.5][Permission-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/subscription/listener/v3/5.0][UDDIClient-subscription-listener-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/subscription/v3/ext/6.0][UDDIClient-subscription-v3-ext][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.5][Taxonomy-client-v31][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval_checker/5.0][Approval-checker-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval_production/5.0][Approval-production-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/wasp/app/uddi/6.0][UDDI-services][6.0]
[Fatal Error] account_list.xml:1:1: Premature end of file.
<Dec 23, 2008 11:03:04 AM PST> <Error> <HTTP> <BEA-101216> <Servlet: "Registry Servlet" failed to preload on startup in Web application: "registry.war".
java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at com.systinet.uddi.security.destination.DestinationSecurityModule.load(DestinationSecurityModule.java:25)
at com.idoox.wasp.ModuleRepository.loadModule(ModuleRepository.java:120)
org.xml.sax.SAXParseException: Premature end of file.
at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at com.idoox.config.xml.XMLConfigurator.prepareConfigFile(XMLConfigurator.java:575)
at com.idoox.config.xml.XMLConfigurator.init(XMLConfigurator.java:420)
at com.idoox.config.xml.XMLConfigurator.init(XMLConfigurator.java:333)
Truncated. see log file for complete stacktrace
>
<Dec 23, 2008 11:03:04 AM PST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'registry'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "Registry Servlet" failed to preload on startup in Web application: "registry.war".
<Dec 23, 2008 11:03:04 AM PST> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "zsoaLAALSRAdminServer" for domain "zsoaLALASRDomain" running in Production Mode>
<Dec 23, 2008 11:03:04 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 23, 2008 11:03:04 AM PST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Exception in thread "Timer-3" java.lang.NoClassDefFoundError: com/systinet/wasp/webservice/FinalizationSupport
at com.systinet.wasp.ServiceManagerImpl$ReferenceQueueCleaner.run(ServiceManagerImpl.java:2617)
at java.util.TimerThread.mainLoop(Timer.java:512)
at java.util.TimerThread.run(Timer.java:462)I discovered, that the problem is probably caused by a collection, which is returned by a findBy method.
see detail of exception:
Caused by: javax.xml.bind.JAXBException: com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 1 counts of IllegalAnnotationExceptions
java.util.Collection is an interface, and JAXB can't handle interfaces.
this problem is related to the following location:
at java.util.Collection
When I deploy an simple WS (summerizing 2 numbers) it is deployed fine and the WS is up and running.
Does anyone has experienced a similar problem? I want to expose the functionality of my BO methods in order to set up a small POC.
Can anyone please help?
Thanks & Regards,
Michael
null -
I am developing on 64-bit Windows7 Enterprise using VisualStudio 2013. I created a new Windows desktop VB.net application and just created a release build of the default solution/project targeting "Any CPU". I provided the EXE to a
colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see
whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
I changed the build configuration to create a "x86" build but my colleague received the same error. Any ideas why this would be happening (I checked and my colleague has .Net4 Framework installed as well)? Thank you for your time and
response!
Sunish Abraham
"The version of this file is not compatible with the version of Windows you're running.
Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."Hi sunisha,
According to your description, you'd like to run the application in your colleague's computer.
I provided the EXE to a colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
If you want to test the application, you could provide the whole Debug folder to colleague instead of the single exe.
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
Check if the collegue's computer is running 64-bit windows:
Enter Control Panel, click on System and Security.
Under this, you can view the system type. This will describe whether you have 32-bit or 64-bit.
You can also try compatiblity mode.
If the program is not compatible, then you may try to install and run the program in compatibility mode.
Use the following steps:
1) Right click on the Program
2) Click on Properties
3) Click on Compatibility tab
4) Select Run this program in compatibility mode and select Windows Vista or whatever operating system the program was running successfully.
And if you still have questions, I suggest you deploy the application to the Local Network with clickOnce, then your collegue can install the application from the network.
#ClickOnce deployment
http://msdn.microsoft.com/en-us/library/t71a733d(VS.80).aspx
And also, you could recreate a new small application in your computer in Any CPU, then check if this small new application can work well in your colleague's computer. This can judge if the problem is caused by your application.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I want to connect to a network printer hp cp1518ni with different versions of windows (win7& winxp)
I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp) . My pc with win 7 work ok but the pc with win xp not "see" the printer on the network. What is the additional driver should I install?
thanks
This question was solved.
View Solution.Hi @OHIMATAS,
I see by your post that you are unable to network the printer to the Windows XP computer, but the Windows 7 computer is connected. I can help you with this.
Make sure the Windows XP computer is connected to the correct network name, not a Guest network either.
Print a configuration page to get the printer's IP address.
Printing a Configuration Page.
Try and access the printer's Embedded Web Server on the Windows XP computer.
Type the IP address into your web browser's address bar. (Internet Explorer)
Did it load the webpage?
If you can't access the printer's EWS, then check the IP address on the computer to see if the first 3 sets of numbers match the printer's IP. They have to match to be on the same network.
Go to start, type run in the search box, type in cmd, then type ipconfig.
Check the IPV4 address.
Now check the IPV4 address for the printer.
Do the first 3 sets of numbers match?
Try and ping the printer.
In the same window, type ping printers IP address (space between ping and IP address)
What are the results?
Run the add printer wizard through printers and faxes, if you were able to access the printer's EWS.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
BPM 11g install and configuration with Webcenter
Hi,
I am new to this BPM so need some help in installation. Where can I download the latest version of BPM 11g and for installating it what steps do I need to follow. Also I need to integrate Webcenter also so for webcenter integration what do I need to install and configure with BPM 11g.
Do I need to install webcenter full suite for integration with BPM and if so can I install both BPM and webcenter in one home iteself. Where can I find some documentation arround installing BPM and configuring with Webcenter.
ThanksHi,
Need some info on the install I have to install both SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3 on the same box. I have installed the SOA BPM 11.1.1.3 but wanted to find out what is the best option of installing Webcenter 11.1.1.3 as I need to integrat SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3. Here is what I think are the options but don't know which one should I go for or is there any other option but the fact is I need to install both on the same box.
*1. Should I install Webcenter in a separate HOME in doing so I will end up installing weblogic again and then install webcenter. Will endup having two ORACLE HOMES one for SOA BPM and one for Webcenter.*
*2. OR should I install Webcenter in the same home as SOA BPM and create a new domain in doing so what happens to some of the components that are installed when installing SOA BPM.*
*3. OR should I just extend the SOA BPM Domain and have both SOA BPM and Webcenter installed in the same domain. I believe this will only add the webcenter components but don't know if there are any issues.*
And help is really appreciated..
Thanks -
Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?
If this happens on monitor 2 of 2, this problem has been solved here:
http://support.mozilla.com/en-US/questions/794823#answer-157988
Go to "Firefox"--> "Options" --> "Advanced"
Then un-check "Use hardware acceleration when available"
While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.) -
Golden Gate configuration with 12c Database
Hi,
I have a requirement to configure the golden gate with oracle database 12c with container database.
Versions:
Golden Gate - 12.1.2.1.0
Oracle Database - 12.1.0.2
Here we need to configure with container database and two pluggable database.
Kindly suggest me the steps for configuration.
Regards
KumarHello Kumar,
I think you need to do the same setup as other GG versións :
1. Install Golden Gate software on extract/replicat sites
2. Create GG User with the necesary privs.
3. Set Min Logging level at database level.
4. Set TRANDATA for the tables that you like capture changes
After, you need analyze the objects that you need replicate and define the capture process.
To use GG on a MultiTenant Database, you need define at extract level the PDBs and the objects that you need extract. Remeber that in a Multi-tenant enviorment, only a set of redo logs exists,then the capture process is Multi-Tenant aware, because allow
set the PDB and the schema and the objects that you like capture. It is called qualified three-part name, PDB.SCHEMA.TABLE
Example:
SOURCECATALOG FINANCE TABLE SAP.*; ---> Source is the way to inlcude the PDB
TABLE REPORTS.*;
SOURCECATALOG HR TABLE SIEBEL.*;
TABLE REPORTS.*;
SOURCECATALOG MFG
TABLE CUSTOMER.ORDERS;
TABLE REPORTS.*;
TABLE HQ.LOCATIONS.*;
In this example, Extract captures the following:
All tables in the SAP and REPORTS schemas in the FINANCE PDB.
All tables in the SIEBEL and REPORTS schemas in the HR PDB.
All tables in the CUSTOMER and REPORTS schemas in the MFG PDB.
For the last TABLE statement, Extract captures all tables in the LOCATIONS schema in the HQ PDB. This statement is a fully qualified three-part name and overrides the previous SOURCECATALOG specification.
You have more info at : http://docs.oracle.com/goldengate/1212/gg-winux/GWURF/gg_parameters147.htm
Also, you have a dedicated chapter of using GG in a Multi-Tenant env at: https://docs.oracle.com/goldengate/1212/gg-winux/GIORA/config_containerdb.htm#BDCFDFDE
I hope help.
Regards
Arturo -
Problems with Italian version of Dreamweaver [subject edited by moderator]
The italian version of this software doesn't match with the configurations in the tutorials and it's impossible to follow the procedure to learn how to use it!! I've spent more than two hours just to put the "split working area" in vertical with no results. No way to open the same tools. And then, where are the assets files to download??? I think it could be a wonderful idea give us something easier to learn, simply having giving us the right correspondence between the software (open for the first time after the download) and the video tutorials…please, in this condition I cannot work and so how can I do?
Ciao
PaoloDear Murray,
unfortunately I can't go on with this program…it's impossible without the CSS file showed on the tutorial…I've also tried to find something on the web and I've tried to install Adobe Widget Browser but it doesn't work!
So I've lost a lot of hours and I'm very frustrated and disappointed…and then the Dreamweaver CC version I've downloaded from Creative Cloud is different from the one in the tutorials, so I can follow all the indications without stop and start searching somewhere the things…
In this condition it's impossible to learn how to use this software…it's an incredible waste of time…and paying for that!!
Il giorno 01/mar/2015, alle ore 20:17, paolo <[email protected]> ha scritto:
I'm using just CC…
Il giorno 01/mar/2015, alle ore 16:46, MurraySummers <[email protected]> ha scritto:
>>
>> Problems with Italian version of Dreamweaver
>> created by MurraySummers in Dreamweaver support forum - View the full discussion
>> Different language versions of the same version of DW are the same. What I mean by that is that no matter which REGIONALIZED version you are using, the interface should be the same. So even though you say you are using DW CC, is it CC2014, or CC2014.1, or just CC that you are using? (you can tell by looking under HELP > About Dreamweaver)
>>
>>
>> On this page - How to make and style a web page in Dreamweaver | Adobe Dreamweaver CC tutorials - there is a link to download the sample files right under the "Browse Dreamweaver CC Tutorials".
>>
>> If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240860#7240860 and clicking ‘Correct’ below the answer
>> Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
>> Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240860#7240860
>> To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
>> Start a new discussion in Dreamweaver support forum by email or at Adobe Community
>> For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
>
Maybe you are looking for
-
Sequence of material line items in Project
Hi all, I have transfered the BOM using CN33 in the project, the systems is configured such a way that after BOM upload the system creates PR automatically but, when the PR is created in the system the sequence of the line item material is no
-
Using Photos (iPhoto) as Desktop Background and system startup time
I've been beating my head against the wall trying to figure out why my iMac is taking longer and longer to boot (mostly after software updates). My stopwatch shows a little over 3 minutes from chimes until there is a usable UI. Through process of eli
-
How can I get a restore cd for my mac g5
I am looking for a restore CD for my mac g5
-
Ther area where the quotes used to appear is totally blank and the controls are not responsive.
-
Hi, I really like the look of the graph used in XY Multi Plot.VI Does anyone know if you can have two scales on the y-axis for this type of plot? How to implement it? Thanks aleks.