Netscape.cfg error on startup and no linking from other programs...

When I start up Firefox 4.0.1, it gives an error message regarding a netscape.cfg file. If I happened to use a link embedded in an email to open Firefox, it does not appropriately link -- instead it still goes to my homepage. If Firefox is already open, it will link from another program.
I am not the only person having this problem.

Menchar,
Where did you get this application, and has it ever worked before? What version of Measurement Studio, Visual Studio, and NI-Daq was it built on ? If it has worked before, what changed, and is it possible to strip down any parts, so you can test the pieces individually rather than the program as a whole? Also are you getting NTDLL errors while doing anything else on this computer? It may be a corrupt NTDLL.dll file http://www.downloadatoz.com/howto/How-to-resolve-ntdll-dll-error.html.
You can view the OCX file path if you go to Project » Add to Project » Components and Controls and select a specific CW control under the Registered ActiveX Controls. I have attached a screenshot showing an OCX file pat.
Richard S -- National Instruments --Applications Engineer -- Data Acquisition with TestStand
Attachments:
2009-05-05_165739.png ‏23 KB

Similar Messages

Links from other programs won't open in Firefox

This has been asked a number of times before, but none of the answers worked for me. I have Firefox 26.0 (the most stable for me) and Thunderbird 24.6.0. After a computer crash and reloading both programs, I first noticed the problem with links from Thunderbird, both clicking and right clicking with "open in browser". But then I remembered trying to open help in MS word and Frontpage which are supposed to open from the internet.
I have checked that Firefox is the default browser, changed the file (none) file transfer protocol, then deleted it, etc. Nothing helps.

I now have FireFox 32.0.2 no joy. I have loaded ThunderBrowse which took care of Thunderbird but still can't load links from other programs. I fixed this before (other backups, I crashed my windows C drive and have been trying to restore), but can't remember how. I think it required reloading IE (I had deleted IE on my latest restore), but I have now done that with no joy.
When I click on a link from another program, nothing happens, and when I right click and am offered "open in browser" nothing happens, and when offered " copy browser link" it doesn't copy.
I tried resetting FireFox, no joy.
Noticed control panel "set program access" doesn't hold, always goes back to custom, and defaults to "uses default browser"!
Please help!

Firefox won't open external links (from other programs), says its already running but not responding.

I'm having this problem, everytime i click a link on other program, like the program's link on the about tab, or a youtube link on Live Messenger, it won't open, a dialog pops up saying firefox is already running and not responding, but it is there, and working.
If it matters, i have the "beta" tab preview enabled on the windows 7 toolbar.

You're welcome

Firefox 6.0.2 is no longer opening links from other programs even with all extensions disabled

Firefox updated to 6.0.2 last night and now it will not open any links from outside programs. When you click the hyperlink, the window flashes but Firefox does not respond. I have disabled all extensions, it did not affect the issues.
Also with this update, I am unable to use Synergy, Firefox locks the cursor to one computer and will not let it move to another.

I am having the same problem with Firefox version 8.0.1. I checked addons and they are up to date. When I make Chrome my default browser hyperlinks work fine to Chrome.
Tim Lorang

Firefox won't open links from other programs if already running

I've seen this reported many other places, but none of the solutions have worked. I am running Firefox v33.0.2 (current as of this message) on Windows 7 64-bit (fully updated). I did the following:
1. Completely deleted my profile;
2. Uninstalled Firefox, then manually deleted all remaining files on the system pertaining to Firefox and rebooted;
3. Gone into the Windows "Default Programs" control panel (DPCP) and told it to make Internet Explorer the default (giving it all of its defaults);
4. Downloaded a fresh copy of the installer and installed Firefox 33.0.2;
5. Let the installer set my default browser to Firefox;
6. Tested link opening behaviour (see below);
7. Let Firefox set itself as the default browser when it asked me;
8. Tested link opening behaviour again (see below);
9. With Firefox not running, gone back into the DPCP, and had it set all of Firefox's defaults;
10. Tested link opening behaviour again (see below);
11. With Firefox not running, set Internet Explorer to the default via the DPCP, then back to Firefox;
12. Tested link opening behaviour again (see below);
13. Repeated steps 11 and 12 with Firefox in safe-mode;
14. Repeated steps 11 and 12 with Firefox in normal-mode with a new profile;
The observed link-opening behaviour:
- Internet shortcuts (i.e., actual shortcut files on, say, the Desktop) open in Firefox without issue whether or not Firefox is already running. When this approach is taken, no additional firefox.exe processes are created. The process does not have any command-line parameters per Task Manager;
- Links clicked in Thunderbird open correctly if Firefox is not running: one new firefox.exe process is created, I get a new Firefox window and the link loads correctly. The firefox.exe process does not have any command-line parameters per Task Manager;
- Links clicked in Thunderbird yield the "Firefox is already running, but is not responding" message if Firefox is already running. In this case, I see a second firefox.exe process created. Per Task Manager, the new process has the command-line arguments '-osint -url "FOO"' where FOO is the URL I clicked.
From these observations I believe that the link hand-off behaviour is broken. I use a single profile using the as-installed shortcuts.
Intitial version: 33.0.2
Update: Updated to 33.1, still broken.

Under Tools > Options > Advanced look to see if the "check if Firefox is default browser on startup" Check this and then restart FF. If it isn't the default it should ask if you want to make it the default. Choose yes and it should open when clicking links again.

How to store Connection object and call it from other programs.

Hi,
I am trying to connect to the database, store the connection object and use this connection object from other standalone java programs.
Can any one tell me how to do this? I've tried in the following way:
In the following program I am connecting to the database and saving the connection object in a variable.
public class GetKT2Connection {
   public static void main(String[] args) {
      String url = "jdbc:odbc:SQLDsn;
      String dbUser = "sa";
      String dbPwd = "sa";
      Connection kt2conn = Connection connection = java.sql.DriverManager.getConnection(url, dbUser, dbPwd);
      if(kt2conn == null) {
         System.out.println("Database Connection Failure!");
      else {
         System.out.println("Connected to Database...");
     GetKTConnectionObj.storeKT2ConnectionObj(kt2conn);
} Here is the program to save connection object in a variable.
public class GetKTConnectionObj {
   static Connection kt2Connection = null;
   public static void storeKT2ConnectionObj(Connection conn) {
   kt2Connection = conn;
   public static Connection getKT2ConnectionObj() {
   try {
      return kt2Connection;
   catch(Exception e){
      System.out.println(e);
return null;
}Now from the following code I am trying to get the connection object that is stored. But this is throwing NullPointerException.
public class Metrics_Migration {
public static void main(String args[]) {
     try {
    java.sql.Connection connection_1 =   GetKTConnectionObj.getKT6ConnectionObj();
     catch(Exception e){
}

kt2Connection is null. You need to store it first, to make it not null. Otherwise it will stay null forever. And why on earth are you trying to do this THIS way?
If you are running the two applications separately, it wont work either.

Firefox wont open webpage when linked from another program

When linking from other programs, a new firefox window will open, but displaying a blank page instead of loading the page. I checked for firefox being the default web browser, but I cant figure out what other options may be important. It actually started happening when upgrading to Ubuntu Natty, did not happen when using ff 4.0.1 on maverick. Any Ideas? Thanks for the help.

First and foremost, please update Firefox to '''3.6.17''' by clicking '''Help'''| '''Check For Updates'''.
The reason for this is because there was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond. 
See also: http://blogs.comodo.com/it-security/data-security/the-recent-ra-compromise/ 
As regards your problem, you may have a corrupt '''places.sqlite''' file.
Please see: http://kb.mozillazine.org/Locked_or_damaged_places.sqlite 
and [[Error loading web sites]]

Firefox 3.6 doesn't open links clicked from other programs (IM, etc.,)

Whenever I try to open a link from either my IM or an IRC program like mIRC it won't open in firefox. I have to copy and paste the link.

I now have FireFox 32.0.2 no joy. I have loaded ThunderBrowse which took care of Thunderbird but still can't load links from other programs. I fixed this before (other backups, I crashed my windows C drive and have been trying to restore), but can't remember how. I think it required reloading IE (I had deleted IE on my latest restore), but I have now done that with no joy.
When I click on a link from another program, nothing happens, and when I right click and am offered "open in browser" nothing happens, and when offered " copy browser link" it doesn't copy.
I tried resetting FireFox, no joy.
Noticed control panel "set program access" doesn't hold, always goes back to custom, and defaults to "uses default browser"!
Please help!

Any speed difference between Apple Wifi Router(air express) and Tp link(or others) wifi router)

Any speed difference between Apple Wifi Router(air express) and Tp link(or others) wifi router?
I'm using a tp link router and sometimes it takes a long time delay for my 2 mac computers to connect each other. I don't know this is because of the router compability or the computers.

Anyone knows?

I used to be able to copy or drag and drop links from the address window. Now with the update, only the address is copied or dragged not the link. (Says something about not giving site information). I want to be able to drag and drop or copy links.

Question
I used to be able to copy or drag and drop links from the address window. Now with the update, only the address is copied or dragged not the link. (Says something about not giving site information). I want to be able to drag and drop or copy links.

To be more precise, you can setup a JComponent or JPanel on top of your JavaFX nodes that has a TransferHandler that can convert the (AWT/Swing) images dragged to the app to JavaFX image and then insert it into the underlying node.
As for the file chooser itselft: ListView and the JavaFX composer can allow you to create one quite easily. TreeView can aslso be used to a lesser extend (still a big buggy). For both of these, there are small bugs in the Cell API that may (or may not) prevent from displaying a proper thumbnail in the cells.
You can also use a regular JFileChooser if you do not mind the dialog box having a different LnF from the rest of your application.

How to eliminate Exit and Help links from IAC iviews....

Hi All,
How to eliminate the Standar Exit and Help links from the IAC iviews. i used webgui_simple_toolbar also but it didn't work. Is there any other way for getting rid of these links.
Thanks & Regards,
Ravi

Hi Barin,
I'm facing the same issue, i.e I've created IAC iview which display spool request(SP02). Now I want to hide title, menu in the iview. Could you please give me some info about creating templates in internet services.
Regards
Anand

"Error occurs when loading transaction data from other model" - BW loading into BPC

Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
Chris

Hi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris

Error occurs when loading transaction data from other model

Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
Praveen

Hi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST)

Error occurs when loading transaction data from other cube

Hi Gurus,
I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
Can anybody help me to solve this problem?!
Thanks a lot & Best Regards,
HH

Hi,
Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category=*NEWCOL(ACTUAL)
P_0BASE_UOM=0BASE_UOM
P_0BUS_AREA=0BUS_AREA
P_0COSTCENTER=0COSTCENTER
P_0FUNDS_CTR=*NEWCOL(null)
P_0GL_ACCOUNT=0ACCOUNT
P_0LOC_CURRCY=*NEWCOL(MXN)
P_0MATL_TYPE=*NEWCOL(null)
P_0VENDOR=0VENDOR
P_DataSrc=*NEWCOL(UPLOAD)
P_ZMATERIAL1=0MATERIAL
P_ZMATERIAL2=*NEWCOL(null)
P_ZMATL_CLASS=*NEWCOL(null)
P_ZMATL_TESP=*NEWCOL(null)
P_ZRATIO=*NEWCOL(KF_inpmdInt)
Time=0CALMONTH
SIGNEDDATA=0TOTALSTCK
*CONVERSION
Time=Time_conv.xls
EXTERNAL     INTERNAL
201101          2011.JAN
201102          2011.FEB
201103          2011.MAR
201104          2011.APR
201105          2011.MAY
201106          2011.JUN
201107          2011.JUL
201108          2011.AUG
201109          2011.SEP
201110          2011.OCT
201111          2011.NOV
201112          2011.DEC
Thank you for taking at glance to the files.
Best Regards,
HH

TS1963 indesign cs4 is giving me an error 5 after i migrated all the other programs adobe suite cs4.

indesign cs4 is giving me an error 5 after i migrated all the other programs adobe suite cs4. i migrated from a powerpc g5 to a new mac mini 10.8.2. the other programs to be fine but i have lost all my brush sets from photo shop, anybody know how i can reclaim them? trying to get used to the new interface. and i would like the programs/icons to open with a double click instead of using the command O combo. thanks
paul

Possible clues...
http://www.graphicdesignforum.com/forum/showthread.php?t=54463

Netscape.cfg error on startup and no linking from other programs...

Similar Messages

Maybe you are looking for