Netsh wlan show profiles name=[profile name] key=clear batch file

i want to make a bat.file for this command : netsh
wlan show profiles name=[profile name] key=clear.
when i start the bat.file, i want to only write in the network name, and just press enter. and then the network key will show.
can you help me please??
ps, sorry for bad english...
i think something like this(can't finish, because don't know how), and i dont ewen know if this command is properly written, please edith and share it. :)
@echo off
:home
title net password
color a
cls
echo.
echo network
echo=============
echo.
echo [1] input ssid
echo [2] exit
echo.
set /p op=
if %op%==1 goto 1
if %op%==2 goto 2
:1
color a
cls
echo network key
echo ================================
echo.
Set /p username=Username:
netsh wlan show profiles name=[username] key=clear

Similar Messages

Add mobile broadband profile using netsh gives "Invalid Profile XML" error

We're trying to create an automated installation to upgrade to 8.1 Pro soon and since we have our own APN at our provider, we'd like to add this using a script. However when I try to add my XML profile using
netsh mbn add profile interface="Mobile broadband" name="profile.xml"
I receive the following error: Add Profile Failure: Invalid Profile XML.
I've found some Windows 7 topics regarding this issue, pointing at the encoded Subscriber and ICC id's in these XML files. I have already found the unencoded values with
netsh mbn show ready * and added them to the XML file, but still no dice :-(
This is my XML file:
<?xml version="1.0"?><MBNProfile xmlns="http://www.microsoft.com/networking/WWAN/profile/v1">
<Name>My Company Name</Name>
<IsDefault>true</IsDefault>
<ProfileCreationType>UserProvisioned</ProfileCreationType>
<SubscriberID>123451234512345</SubscriberID>
<SimIccID>1234123412341234567</SimIccID>
<HomeProviderName>vodafone NL</HomeProviderName>
<ConnectionMode>auto-home</ConnectionMode>
<Context>
<AccessString>custom.provider.nl</AccessString>
<UserLogonCred>
<UserName>username</UserName>
<Password>p4ssw0rd</Password>
</UserLogonCred>
<Compression>DISABLE</Compression>
<AuthProtocol>NONE</AuthProtocol>
</Context>
<DisplayProviderName xmlns="http://www.microsoft.com/networking/WWAN/profile/v2">My Company Name</DisplayProviderName>
</MBNProfile>
I've removed all existing mobile broadband profiles from the system, netsh mbn show profiles
shows an empty list so it's not a naming issue. I tried removing the XML version header from the file (a lot of examples of these XML files don't have it), leaving the Subscriber and/or ICC ID empty, removed them from the XML file but nothing seems to
work.
Does anyone have some other suggestions?

Hi,
I'm sorry for have no idea with your problem. Since those methods you tried but failed, in my opinion, it would be better to use Process Monitor to capture the trace of excuting this XML file.
Start Process Monitor, close as much unrelated process as possible, then run command to enable this XML file.
After error occures, stop capture.
Process Monitor:http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Roger Lu
TechNet Community Support

Trying to enroll as iOS developer.It shows my name incorrectly.

Hi.
Trying to enroll as iOS developer. It shows my name as "Testowski Testator", but it should be "Karol Depka Pradzinski" as in Apple ID.
Even when I change it in Apple ID profile, the change does not propagate to what Developer enrollment displays.
In one place, only one part of the name got propagated.
Tried looking for other ways to change it, but no luck.
Also changed back and forth to force it. No luck.
Any hints appreciated!

Thanks. But apparently it is connected to Apple ID even before enrolling, because the web page says:
Enter your contact information.
Legal Name
To edit your name, visit My Apple ID.
Name:
Testowski Testator

Lion Server 802.1x WLAN System Profile

Hello skilled guys in the community :-)
Today I would need some kind of how-to about configuring Lion clients into a Lion Server 802.1x WLAN network. As I am currently setting everything up from scratch in my home/lab environment here the bits and pieces I have already successfully up and running:
DHCP
DNS
Open Directory Master
Profile Manager
The next I've done is to activate the Radius service in the server which first of all asks me for the certificate. There was only one and this was the one created from the Open Directory wizard. As the root certificate of this certificate should be already installed in managed clients (done by joining to the Profile Manager) workstations should already trust this certificate and there should be no issue.
Question here: Can this certificate be used and am I on the right way or should I create an own certificate for this? Is yes, how?
After many hours of playing around with the radius server and my access point (3COM 9552) I finally got it working and I could connect to my 802.1x network by just providing OD username and password.
Question here: When adding a new radius client there are four fields in the dialog box: Name (should be clear), IP (more than clear), the shared secrect (also not a problem) and the type. As this type is not a drop down field but just a text box I was wondering quite a while what the server expects from me to put in there. I decided to write there 'other' as this was the only option I could find from googling. Is this correct?
As next step I would like to configure a WLAN System profile using Profile Manager. So a WLAN connection which is up even though nobody is logged into the machine.
Question here: Can anybody help me with this. I had a look into this config dialog in Profile Manager but could not get any clue of System Profile and also don't know what else I need to configure there. I also see that I need to configure a name and password but don't understand why I need this. For my understanding the client machines (especially with System Profile) should use there the machine name and password (COMPUTERNAME$) as I created a trusted bind to OD. Or is it rather so that I need to create a dedicated account for WLAN connection with a not expireing password suitable long? What kind of things I have to configure also in there? Trusts, Authentication?
Thank you already for your help. I'm happy to get the Radius authentication now working. Now would be happy getting rid of the rest of the question marks.
Cheers
Robert

Any ideas here??
In profile manager I also saw the option authenticate with computer credentials. I belief for this it's needed to have a trusted bond to OD like I have. But when I configure it (TTLS with computer name and password) WLAN never gets connected.
Any idea on this. Also where can I see that the profile is made as a system profile. The only tick box I've found is for the logon window authentification which is far to late for me to establish any WLAN connection.
Thanks.

I am using the iphone 4s in india now. i bought it from canada (factory unlocked). But here in india. when i put my vodafone sim in 4s. It only shows th name of the carrier but dont show the range towers. i tried airtel and reliance carriers also.

I am using the iphone 4s in india now. i bought it from canada (factory unlocked). But here in india. when i put my vodafone sim in 4s. It only shows th name of the carrier but dont show the range towers. i tried airtel and reliance carriers also.but the result was same. now what can i do??

BobbyLe wrote:
I could not follow the AT&T instruction because my network (Optus) doesn't have anything as username or password or dial-up phone number. The only parameter I needed to key into Mobilink (the software I am running on the S10 is the APN which is: connectme that's it no number, no PIN, no password, nothing else.
How do I tell Windows to do that?
*99***1# <--- the number to call
at+cgdcont=1,"ip","connectme" <----- the string to put in the advanced field of the modem

Navigational Attribute Filter value selection not showing full name

Hi Experts,
We are having Navigational Attribute TM Responsible. We have created variable in BEX for it. When we are searching for value selection for this in RSRT, its showing only last name and key part. But If I dont pass any values, and display the result its showing full name. Please find the screen shots.
Customer needs full name to be available for selection in filter in above picture 1.
Please suggest what needs to be done.
Thanks,
Govind

Hi All,
The issue is resolved. Making display as Long text at Infoobject level and at Query display level was not working. Hence I tried to change the display at Multiprovider level as shown below. This fixed the issue.
Right click Navigational attribute -> Provider specific properties
Made the display as Long text.
This setting resolved the problem.
Thanks for help and replies.
Thanks,
Govind

We have multiple devices in our family. On each iPad/iPhone each user has their own apple id for iMessage, Facetime and icloud, but we all sign in to the same apple id for itunes. When one of my kids comments on my shared photostream, it shows my name??

We have multiple devices in our family. On each iPad/iPhone each user has their own apple id for iMessage, Facetime and icloud, but we all sign in to the same apple id for itunes. When one of my kids comments on my shared photostream, it shows my name and not theirs as the commenter. How do I fix that?

CREATE A NEW USER
Go to System Preferences --> Create a New User in Users & Groups
Decide on whether to setup as Admin or Standard User.
Switch to the New User by logging out under the Apple in the Menu Bar or use Fast User Switching
Fast User Switching allows other users to leave current applications and windows open. Depending on RAM, you might need to log out rather than use FUS.

How do i get my screen that show by columns (letf to right) 1) showed Albumn Name then under that showed Artist, next column listed songs on that albumn, next was time (song length), then Artist, Genre, Rating

I imported 2174 songs into my itunes from my husbands CD collection. Then for some reason i was checking out some of itune features. I clicked on FILE>DISPLAY DUPLICATES, Just to see what this feaure was. it changed my page to something that i did not like. I am trying to figure out how to get my itunes VIEW to what it was BEFORE i clicked on the DISPLAY DUPLICATES. My page before looked like: as follows (columns from LEFT TO RIGHT) showed:
COLUMN 1) showed ALBUMN NAME WITH ARTIST RIGHT UNDER THAT, then COLUMN 2) LISTED ALL THE SONGS ON THAT ALBUMN, COLUMN 3) SHOW TIME (SONG LENGTH), COLUMN 4) ARTIST 5) GENRE 6) RATING & 7) PLAYS (WHATEVER THAT MEANS?)
Now the screen: COLUMN 1) JUST LISTS THE ALBUMNS NAME (EACH ALBUMN ONCE, ALL THE WAY DOWN THE COLUMN. BESIDE EACH ALBUMN TITLE IS A (NUMBER...i.e. 13) THEN NEXT TO THAT IS 1 SONG (I AM ASSUMING THIS I HOW MANY TIMES THAT PARTICULAR SONG IS IN MY LIBARY), THEN TIME, ARTIST, GENRE, RATING & PLAYS...
I AM ASSUMING THAT SOMEHOW I HAVE TO TAKE OFF THE "DISPLAY DUPLICATES" BUT HAVE CLICKED ALL OVER TO FIGURE OUT HOW TO DO THIS???? BUT CANT FIND OUT WHERE OR HOW???
CAN SOMEONE PLEASE HELP???
THEN I THINK I BETTER (TAKE THE TOUR) BEFORE I START CLICKING ON THINGS THAT I DO NOT KNOW WHAT IT IS!
PLEASE HELP...I HAVE ANOTHER 400 OR SO CD'S TO IMPORT! SURE HOPE MY HUSBAND IPOD WILL HOLD ALL THESE SONGS SINCE I PURCHASED IT FOR HIM MANY YEARS AGO! OF COURSE I HAVE NOT BEEN ABLE TO USE IT FOR A YEAR (SINCE STAPLES ATTEMPTED TO FIX MY OLD COMPUTER & LOST ALL THE MUSICE OUT OF MY COMPUTER) & IF I PLUGGED THE IPOD IN AGAIN, I WOULD HAVE LOST THE 1800 SONGS THAT WAS IN THE IPOD!!! NOTHING BUT PROBLEMS WITH STAPLES, MICROSOFT! RECEIVED NEW COMMPUTER & NOW NONE OF MY EXPENSIVE PROGRAMS WORK ON THIS STUPID WINDOWS7. OVER 3500.00 WORK OF EXPENSIVE SOFTWARE & NO ONE CAN TELL ME HOW TO GET MY PROGRAMS INSTALLED & WORKING...
JUST MY LUCK...LOOKED AT BACK OF IPOD & SURE ENOUGH IT ONLY HAS 30 GB!!! SO FAR I HAVE 16+ GB OF MUSIC IN ITUNES & HAVE 400 CD'S TO GO YET. AMAZING...NEW COMPUTER THAT WONT RUN MY PROGRAMS & NOW AN IPOD WITH NOT ENOUGH MEMORY& OF COURSE NOT ENOUGH MONEY TO PURCHASE ALL MY PROGRAMS AGAIN! LIKE MICROSOFT HAS TO MAKE OPERATIONS THAT WILL NOT RUN...PERFECTLY GOOD PROGRAMS LIKE PHOTOSOFT, DREAMWEAVER, WACOM, PUBLISHER, MICROSOFT PICTURE IT, PUBLISHER, POWERPOINT, ETC. ETC. FOR $199.00 THEY CAN TRY & HELP ME. WHO HAS THAT MUCH MONEY. THEY WONT EVEN HELP ME RE-INSTALL THEIR OWN PROGRAMS...I KNOW I WENT OFF THE ORIGINAL SUBJECT BUT AM SO FRUSTRATED THAT I WANT ANYONE TO LISTEN TO POSSIBLY GET SOMEONE TO HELP WITH THESE OTHER ISSUES, ALSO. STAPLES HAVE REALLY NOT HELPED AT ALL EITHER.. BUT THEY SURE CHARGE ENOUGH TO MAKE YOU KEEP PURCHASING MORE THINGS TO MAKE THE PROGRAMS WORK & THEY STILL DONT. THEY SURE CAN TELL ALOT OF LIES THOUGH! FOR NOW, CAN SOMEONE HELP ME GET MY ITUNES SCREEN BACK??? THANKS SO MUCH...THIS I AM SURE IS OPERATOR DEFISENCY!

The large text size makes your post almost impossible to read.
Excessive use of bold or capitals (also) makes posts difficult to read.
You can drag most of the column headings left or right, or right-click on the header to turn columns on or off.
Once you've used File > Display Duplicates or Shift > File > Display Exact Duplicates you can use File > Display All or the Display All button at the bottom of the list to restore the display.
For general advice on organising your library see this article on Grouping tracks into albums.
tt2

IMessage not showing contact names

I just recently downloaded and installed OS X Mavericks on my 2011 iMac and trying to get up and running with the new iMessage app. But there are two major bugs I can figure out how to fix if anyone can help me fix these problems or comment if your having the same issues that would be a big help.
1: When receiving a message from someone in my contacts list/address book, their names do not apper next to the message, but rather only their phone numbers. I have went thought the view options and selected show contacts name and also tried adding a name to the existing number with no results. Does anyone know how to fix this bug?
2: The lag time between SMS/iphone messages and the time it takes to show up in iMessage on my mac is rather long. There is about a 3 minute delay before the text message conversation shows up from my phone to computer. Any suggestions on how to fix this?
Thanks

Hi,
Re 2).
This is a bit of a "known Issue" with no current fix.
The issue is related to the fact a iOS device seems to get the "first " push of the iMessage and that the Mac only gets "Sync" push which seems to be slower (and for some bizarre reason not always in order)
Re 1) I have seen this reported but maybe not as clearly as your post.
No-one seemed to make it clear the Contacts were in the Address Book (Contacts app) and that it seemed to be ignoring the Names for just the Numbers.
Obviously you can use the View Menu > Messages > Show Pictures and Name (or Show Names)
As you say this should link the ID or iPhone Number being used in the iMessages to the "Real Name" in the Address Card for that person.
The options are:-
A) You are receiving an iMessage from an iPhone Number but the link to the Address Card is not working.
If you make sure you are sending to an Apple ID what do you see ? (Apple ID or Real Name or in fact the iPhone number again)
This may be because you have lost the ability to "read" the saved data for the Contacts app.
B) Check the Contacts app and see if it is Syncing properly with any iOS device (i.e that all items have the Name as well as an iPhone number in the Address Card.)
10:32 pm Thursday; November 7, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Error message: "Can't open file "[File path, file name].key"

If I attempt to open any Keynote files, I now get this error message.
"Can't open file "[File path: file name].key"
To clarify, the text in the square brackets above would be the file path and then the file name.
The file then will appear on the screen, but is unresponsive to any clicks or menu commands.
The files will open successfully on other Macs, so they aren't corrupt.
Also - I've just checked, and opening Keynote and trying to create a new presentation leads to the same problem: All screen menus / buttons are dead - all I can do is drag the window around the screen.
I've tried to reinstall Keynote, but this hasn't resolved the problem.
Is there some corrupt preference file (or similar) that I need to get rid of? Is there an easy way to do a complete uninstall of Keynote so I can try another install? Or is this a symptom of something else?
All ideas gratefully appreciated!
Message was edited by: Brendan Donlon

All the issues I describe in my questions around this time re: Keynote were actually symptoms of a soon-to-die laptop. The Hard Disc was corrupting, and Keynote was the first application to be affected.

How to show full name of user in crystal report

Hi. I am using Crystal Report 2008. I need to show full name (first name and last name) of the user logged in. Currently I am using "currentceusername" but it shows the user id that a user uses to login.
Is there any way to show the full name of the user in crystal report?
Thanks in advance.

Hello,
Not you H4... Can I suggest if someone replies to actually add something of value!!!!
Cr does not have the ability to query your AD Server. What you would have to do is use a AD query tool or Export Option and export the user info from the log on ID into a Excel or an Access table or something CR could report off of. Then you can add a subreport to get the name from the ID and insert it into the main report.
Check with your IT department, they should have tools to get the info. I'm not sure if there is a DB connector that would allow you to query the AD server directly but if there is one and it supports ODBC then you can use that as your subreport Data connection.
Typically names do not change that often so rather than running the Query every time the report is generated it would be better to export the info to a text type file and simply use it for your report. IT can put a rule on to export if the Names change.
Thank you
Don

When I download something from the Web, the "Downloads" window opens, but the window remains blank. Before it used to at least show the name of the file and I could open the file from the "Downloads" window. Is there a way to get this functionality back?

I'm running Windows XP which is updated to latest version (which I think might be Service Pack 3, but not positive.) Mozilla Firefox is version 5.0. I tend to use Google as my search engine so most of the stuff I download comes through sites found through Google, which is also updated.
At some time in the past (maybe a few versions ago) when I would download a file from the Web, the "Downloads" window would open and in the window would be displayed the name of the file I was downloading or had just completed downloading. I think I used to be able to then click on that file name and the file (or the installation file if needed to start the new program) would open. I am currently using Firefox 5.0 (the "About Firefox" screen says this is up to date) and when I download a file or document, the "Downloads" window appears on the screen as it always has in the past, but it remains blank, i.e., nothing appears in the downloads box. I don't remember making any configuration changes, etc., that may have caused the window to remain blank, but I could be mistaken. I know how to find the items I've downloaded (My Documents / Downloads) and can usually guess what the name of the downloaded file might be, but it used to be much easier when something (anything) showed up in the downloads window.
I'd love for someone to tell me about a simple fix for this. I'm willing to be quite embarrassed that I did something I shouldn't have.'''

In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

I created a signature ID and customized the signature; however, when I go to sign it only shows the name layout or graphic image? How do I go back to using the certificate?

Dear Forum
I was using Adobe version XI and the signature feature disappeared from the menu. Now I downloaded Acrobat Reader DC. Using the menu and instructions I created a signature ID and customized the signature; however, when I go to sign a document it only shows the name layout or graphic image? How do I go back to using the certificate that I created?
Any help would be greatly appreciated.
Regards
Carlos

Firefox works fine on Windows 2000 SP4 for me.
Any chance you have a dial-up connection that uses a web accelerator to speed the loading of content?

How to show employee names in descending order but 3rd row is fixed and always top on the table ?

how to show employee names in descending order but 3rd row is fixed and always top on the table ?
for example employee names is A,B,C, D, E
and output is C,E,D,B,A

Since you are posting in the design forum, the short answer is - you don't. Rows in a table have no inherent order that you can rely on and the "position" of rows is a visual characteristic that should be implemented by the application that displays
this information or by the query that is used to generate the resultset.
So the next question is how one accomplishes this particular order within a select statement. That is a tsql question which, for future reference, is best posted to the tsql forum. In addition, many of the questions or issues that you will face
have been discussed in the forums - often many, many times. The first thing you should do when faced with an issue is to simply search the forums and leverage the the knowledge that has already been discussed. In doing so you are quite likely to
see suggestions or related issues that you should consider in your search for a solution.
Now, to answer the question - you need to formulate a order by clause that forces the rows to be sorted in the manner you desire. Effectively you have 2 levels of sorting. The first level divides your rows into 2 groups. Group 1 consists
of rows where name = E and Group 2 is everything else. Following that you then need to sort the rows in each group by name in descending order. Something like:
order by case name when E then 1 else 2 end, name desc

Sent folder shows my name on each message instead of recipient's

I like the new view in Mail, but the sent box shows my name in bold for each message instead of the recipient's. How stupid is that? Obviously I sent all those messages—I want to be able to see who I sent it to to quickly identify a particular email.
I can't figure out a way to change this—did I miss the view setting or something?

bump

Netsh wlan show profiles name=[profile name] key=clear batch file

Similar Messages

Maybe you are looking for