No Automatic Dispatching Of Planned Order to new Production Version

Dear Sir,
When rescheduling an operation from one line to another, the system
checks whether a production version exists for the material to be
produced that contains the new production line as the preferred work
center. If such a production version is found, this version is taken
over into the planned order. The planned order is scheduled again based
on the production version.
The second function allows you to automatically search for an
alternative work center in the case of a capacity overload of a work
center, and to dispatch the operations to it. The predefined
prioritization of the alternative work centers is considered in this
case.
The indicator Reschedule with production version must be set in the
strategy profile.
My issue is sytem does not making automatic Dispatch to the second
Production version for the material at the time of insufficient capacity
Best Regards
Rami Abd El Fattah Mohamed,PPQM Functional & Technical Application
Consultant

In the dispatching control u can remove operation date check indicator and regarding the termination indicator SAP help says"
"if you have not set this indicator then dispatching is not terminated but carried out without taking the production version into account. That means that the planned order is scheduled with the old standard values and the formulas from the new work center and dispatched to the new line."
Please check if it works now.
thanks

Similar Messages

  • Automatic dispatch of Planned Order - Reg.,

    Hi
    Here i'm trying to dispatch a planning order automatically, when a work center capacity got fully loaded. What is the necessary settings has to be done?
    Kindly explain clearly
    Regards,
    Gopi

    Dear ,
    When you are dispatching the operation for Planned Order /Production order in that day , system checks the availble capacity load in that work centre .If required capacity is not avalaible based on the work centre available capacity (Capacity Tab-Available capacity -Check overload CM05 for workcentre in that week) , operation will not be dipatched and Scheduling logg will be created
    .I suggest that you need to check the Available Capacity (can be viewed weekly /monthly -Select the weekly grid -double click -system will dipaly the daily load in a week ) of the work centre and then go back to CM25 with your work centre -select Overall Profile -Enter Work centre -Strategy -Mark "Date Entry while dispatching " which will hel you to dipatch the date based available capacity CM05.Or else try to use CM21-Graphical view (goto -settings-scale-daily split -chek the available capacity date -dispatch.
    In CM01/CM05 , please enter Plant /Work Centre in CM05-Hit DETAIL Capacit list or Varibale View -it will display with weekly bais capcity set up based on the .Select the week where this date fall on or If you want to look the daily baisi load , then goto Planning tab-Profile-Option Profile -select as appropirate to analysis the load daily /weekly
    Setting Required :
    1. Settings for Available Capacity
    2. Setting for Capacity requirements
    3. Settings for Capacity evaluation and leveling
    1.Materials Master define the Production scheduler and production scheduling profile
    2.Work Center - Define the capcity planner group,activate checkbox Relevant for Finite sceduling,on the capacity header define the shift timings,break timings and unit of measure,no of individual capaity, enter formula for scheduling in capacity view.
    3.Routing - enter the values for the standard values. Use control key with scheduling.
    4.In transaction OPU5 and OPU3Z - define the scheduling parameters for planned order and productiion orders and activate the checkbox Capacity requirement and Scheduling. what is the settings in OPPQ and OPPR for the "Start in Past" parameter, you need to keep them consistent with the OPU5 settings.
    Capacity Setup :
    Define time profile in OPD2.
    Define the strategy profile in OPDB
    Define the Overall profiles in OPD0.
    In the order control OPJK I have maintained check capacity with SAPSFCG013 profile.
    Define Scheduling parameters for Production orders-OPKP-Maintain Capacity Checked /Finite Scheduling Cheked /Scheduing Type -BW/FW .
    Hope this will help u in analysis the set up.Revert if u need any help
    Regards
    JH
    Edited by: Jiaul Haque on Apr 28, 2010 2:04 PM

  • Automatic creation of planned order in APO

    Dear Gurus,
    I originally posted this in PP and SD, however, it does now seem to be APO related.
    Hence my posting here. Can you help? This is the question:
    "How can we prevent that APO immediately creates a planned order when the purchase requisition is put in the system.
    (apparently they set up the system as such that a flow then starts and automatically transforms the planned order into a production order).
    We want to prevent APO to automatically create a planned order from the purchase req, we only want a planned order at a later stage, i.e. the finalised purchase order.
    If a setting like this exists, can we activate this per plant?"
    Thanks!

    Hello there,
    The control that you mentioned can be maintained at a product level, which is more granular than what you have asked for. Refer to the PP/DS tab of the product master and you will find a filed for PP planning procedure, which determines various actions that PP/DS executes for a specifi type of event. There are standard planning procedures (procedures 1-9) and ofcourse you can configure your own procedures as well.
    The configurations here define if your dependents requirements have to created immediately or just a planning file entry has to be created or a product heuristic has to be started immediately or no action has to be taken!
    Refer to below link for more info:
    http://help.sap.com/saphelp_scm70/helpdata/en/c1/147a375f0dbc7fe10000009b38f8cf/frameset.htm
    Cheers,
    Kalyan.

  • Automatic conversion of planned orders

    Hi PP Gurus,
    I have a requirement to convert planned orders to production orders automatically. I believe SAP standard does not offer this functionality.
    The possible solution seems to be writing new program which could be a copy of C041 transaction code.
    Did someone ever worked on this functionality?
    Request to share your experience and possibilities on this - Thanks
    Regards
    Seshu

    Dear Seshu,
    In my understanding there is no T Code for making the conversion of planned order into a production order as an automatic
    process.
    But you can use the T code CO41 for converting a list of planned order's into production orders.
    In many cases the planned order is only a proposal and only after converting it into a production order and releasing it then the
    exact shop floor activities starts like Good's issue.This activity is done by a production scheduler.So in case if you develop a
    program to convert automatically,then reservation gets generated for all the production orders, which is not recommended.
    Also check this link,
    http://www.sap-img.com/production/automatic-conversion-to-production-orders.htm
    Check and revert back.
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Aug 11, 2009 10:04 PM

  • Automatic Creation of Planned Order in PPDS Horizon

    Dear Experts,
    Kindly answer my following query.
    I have created PIRs before/inside my PPDS Horizon (its also falling outside horizon as SNP horizon is shorter than PPDS Horizon). If I check the PIRs created by me in /SNPAPO/RRP3, it also shows me planned orders corresponding to them. However, if I create PIR outside PPDS horizon then system is not automatically creating the planned order.
    Kindly let me know which master data/configuration setting is responsible for automatic creation of planned orders within PPDS horizon.
    Best Regards
    Rinju
    Edited by: Rinju Mukherjee on Sep 26, 2010 10:05 AM

    Dear Rinju,
    Check in Product Master PPDS view the Planning procedure maintained? if it is balnk check in the heuristic, the palnning procedure maintained.
    Since automatic planning procedure(3) is maintained, that is the reason it is creating order proposals, it self.
    Sree

  • Dispatching of Planned Order in Planning Table

    Hi Gurus,
    What do we understand by dispatching of planned orders?
    When the orders are need to be dispatched?
    Is it after firming of order?
    What impact it will have on the system after we dispatch the planned order?
    I observe that after dispatching the planned order, we have tick on capacity dispatched. In MD04, for the planned order there are double stars for dispatched orders?
    Can anyone explain the this functionality in simple way.
    Points will be rewarded.
    Srini

    Hi,
    Normally we can do the capacity leveling  for Plannend order and Production Order. In R/3 , MRP run dosenot consider  Capacity Over load, Capacity leveling is required to for Planned order.
    U reserve the Capacity  on particular date by despatching the planned order at Planning Table. Which results in Capacity is scheduled on that Particular date & time for  that Planned order.System will not allow to despatch another order  in the same date.
    Firm & Capacity scheduled check box is activated when u despatch the Order.  MRP will not reshedule that Planned order.
    when u convert that Planned order to production order, system will schedule the order with  same date  & set the despatch status for Each opeartion.No need to despatch the Prod order Again.
    Pradeep

  • Indicator: automatic fixing of planned orders sap (SAP Filed name: PFREI)

    Hi Experts,
    Where can the Indicator: automatic fixing of planned orders sap (SAP Filed name: PFREI) be found in the material master?

    not directly controlled in the material master
    If planned orders are fixed is defined in customizing of MRP types (V438A-FXART)
    and the MRP type is entered in material master (MARC-DISMM)

  • Planned Order for a Product not being shown

    Hi Experts!!
    I am an ABAPer and I am new to SAP APO. We are now working on /SAPAPO/PPT1. When clicked on some quantity, all the planned orders existing for that product are being shown with respective quantities. Now, I am trying to create a new planned order for a product through FM BAPI_MOSRVAPS_SAVEMULTI3 by splitting the quantity among the receipts. I have gone through several posts and have written the logic. But the newly created planned order is not being shown in /SAPAPO/PPT1. I can't find it anywhere. Am I doing something wrong here?
    Here I explain it with an example. I have an aggregated entry for the month of June with quantity 3000, which is already split under receipts 1234 and 1235 as 1000 and 2000 EA respectively. Now, I need to split it as 1000 EA for each planned order and hence am creating a new plord. I am using same FM for changing plords as well with quantities as 1000. So, now both the receipts are being shown with quantity 1000 and the aggregated value as 2000... and the newly created one is missing. But I need the new one to be displayed and the aggregated should be 3000. Why is this happening? Am I missing something?
    I already have posted a query that is related to this total requirement. Change Receipt Quantity for Planned Order in LiveCache . This has the first part of the total requirement. Just provided for extra info, but not related to this issue however.
    Please help me out. Your help is highly appreciated. Thanks a lot!!

    Hi Srinivas,
    With prior experience, i am sure that the BAPI SAVEMULTI3 can be used for Creation & Change.
    I dont think,the FM's which you are using, are recommended by SAP. So , try to use BAPI most of the time,as it ensure data consistency.
    As you told, order is not flown to ECC, but visible in APO, i would suggest you to check the importing parameters of the bapi, like EVENT CONTROL ( should be '1' ).
    and COMMIT_CONTROL(should be 'E').
    Also, check your queues after execution of bapi. you should find your change pointer in the inbound queue of R/3 System. Do let me know if you still stuck.
    Thanks,
    Santosh KB.

  • Planned order Vs Actual Production report

    Hi Experts
    We are running MRP make to stock means we maintain PIR(MD61) in system. On the basis of PIR system create planned order and we declare production against these planned orders. I need a report which show the detail of planned order and actual production declare against that planned order. Please guide.
    Regards
    Parkash Chand

    Dear Parkash,
    second possible soluction could be create a custom report using this standard Bapi BAPI_MATERIAL_STOCK_REQ_LIST in order to read MRP element and to summarize the elements desired   (DELKZ field):
    MRP Ele Ind   Object
    PP     Planned independent requirement
    FE     Production order
    Pa     Planned order
    Third possible soluction setting in customizing the writing of the MRP table MDKP for header data and MDTB for item data and create a Query on these mrp table.
    Let me know if i've been useful for you.
    Daniele

  • Collective conversion of planned order to one production order

    Dear all,
    1. I have N number of pld ord for same material so i need to convert as production order with cumulative quantity.
    Because to reduce  Issing and confirming and receiving of number of production orders.
    2. I need to create Number of production order with diffferent material numbers  in one screen with different production order number.
    Because per day i need to create more number of production order with different material number. If i create one by one it will consume more time as well as its not practical possible for our business scenario.
    Pls let me know any standards are available in SAP.
    Regards,
    S.Suresh.

    Dear Suresh,
    You can convert Planned Orders into Production order collectively as a mass maintanance in CO41 Tcode.
    Revert if any doubt in case using above tcode.
    Further if you wish to have one production order against multiple planned orders it is not possible as per Standard SAP.
    You can convert to each planned order into individual production order not to single production order.
    If you wish clubbed production order then better you use Individual / Collective Indicator  as
    2     Collective requirements only
    Then you will get cumulative planned orders only against each material and you can convert all of them cumulatively to production orders in CO41 as a mass maintanance.
    Hope your problem resolves.
    Regards,
    Tejas
    Regards,
    Tejas

  • Selecting New Production version while Splitting a Production Order

    Hi SAP Gurus,
    Is there any option of selecting a New Production Version for a split Production Order?
    I have a production Order with three operations 10.20 and 30. This production Order is curently using the Production Version 001. Now , i have split the production order at Operation 30 and want to select new production Version 002 for the same.
    Can you please let me know if this is possible?

    Hi Sandeep,
       If you don't mind can you please let me know for what purpose you want to assign a new production version to production order after splitting at operation 30?
       To quickly recap, Production version is used if you have alternative BOM or alternative routings for a material. Based on Production Version that you have assigned in Material Master - MRP screen, your Routing and BOM details are selected.
        So how is this Production Version 002 different from Production Version 001 - is it in terms of routing or bom?
      With Best Regards,
    Srinivas

  • How to add new product version in Mopz?

    Hi,
    Can anyone guide me how to add a new product version in maintenance optimizer?
    I am going to get the stack file of Netweaver gateway 7.4, but without the product version, I could not proceed.
    Thanks in advanced.

    Dear Friend,
    1.    Maintain Solution Manager information in the system’s SLD data supplier. In case of ABAP system using tcode RZ70 and incase of Java system using the Visual Administrator/NWA(for NW 7.3 onwards)àSLD data Supplier.
    2.    Once the data supplier jobs gets executed you system will appear under SMSY under Server, Database and (Technical System in case of Java systems).
    The ‘Data Source’ should be LMDB.Note: Please don’t changes to the system in SMSY
    3)Execute transaction code ‘LMDB’ in your solution manager system.Select Technical system(Give Application server ABAP and SID of the Server)
    4)Click on Edit and select Software
    Click ‘Add’ and it will show Product Version screen  and  search for your installed product.
    5)Select your relevant usage types and once done choose ‘Close’ and save the data.
    6)Assignment of Product System :
    Click ‘Assign to Product System’
    Now Product system does not exist, hence we have to create one. Choose ‘Create’ and confirm
    7)After that complete Landscape Verification check..it should be green.
    8)Go to Solman_setup and complete Managed system configuration.
    after that Create Maintainence transaction and generate stack file.
    Before doing all activities make sure that ST-PI and ST-A/PI Patched should be applied in Managed server(NW 7.4) and run rtcctoll.
    Regards
    Maruthi V

  • Automatic creation of Planned order

    Hi,
    Would like to know how to check if a certain material is set up in MRP to automatically create planned orders or should be cretead manually.  I have verified the material type and the value is already PD (Material requirements planning).
    Thanks,
    Lyncel

    Hi,
    Based on the MRP types sytem will creates Planned Order automatically  when u run the MRP Run.
    MRP type can be  PD,VB...etc .  if it is ND  MRP will not create planned order.
    Even though u have selected the MRP type PD, based on the Planning file entry system  will include the Material in Planning Run and creates Planned order.(Md22)
    Letus explain your problem sothat help further.
    Pradeep

  • Automatic convert of planned order to purchase requisition with latest info price

    Dear Friends,
    Our client want to convert planned order to purchase requisition through background job,but they want to pur requisition picking price should be latest info record price.
    how can i map in to sap,is that possible in T.CODE MDUM, pl help on this requirement.
    Thanks &regards,
    Sabhapathy R

    Hi Sabhapathy R,
    The price in the Purchase Requisition is the Valuation Price of the material master.
    If you press F1 in the Purchase Requisition on the field Valuation Price at tab Valuation , you will see the SAP documentation:
    Price in Purchase Requisition
    Shows the price of the requested material per price  unit.
    Use
    The price and quantity set out in the purchase
    requisition determine the value of the purchase requisition item or
    purchase requisition. In turn, this value is applied in determining the release
    strategy for the requisition.
    In Customizing for Purchasing under Purchase Requisition ->
    Define Screen Layout at Document Level, you can set price and price unit.
    The Valuation price field can be set as a mandatory or optional input
    field.
    Procedure
    Input mandatory:
    If a material master record exists for the
    requested material, the price is automatically taken from the valuation
    price field.
    This is explained in several threadhs:
    Info record price not comming in PR after "Assign source of Supply" in PR
    The price of the Info Record will be determined when the Purchase Order is created.
    If you want price to picks from your Info Record when the PR is created, then check for a user exit or BAdI.
    Thanks and Regards,
    Mariano

  • Automatic conversion of planned order

    Hi all,
    My client wants to convert planned order to production order automatically. Please let me know what are settings required to do that.if planned order to rpod. order is converted automatically, will there any problem else where?
    Please let me know ASAP, AS IT IS VERY URGENT.
    REGARDS
    D.Dutta

    Hi Dutta,
    In Standard SAP it is not possible, all you can do is to create your own program which is copy of std CO41 or COR8.
    Regards,
    Prasobh

Maybe you are looking for

  • Reporting Services Service acting strangely

    Whenever I start the SQL Reporting Services Service, the service starts successfully, but immediately logs three failed login attempts in the security event log.  The audit failure reports this: An account failed to log on. Subject: Security ID: [dom

  • Scanner error 22 on LaserJet M1212nf MFP

    I can priint but can not fax or scan. The scanner bar will not more. ?????

  • What ssd should i get for my lenovo t61 please advise

    what ssd should i get for my lenovo t61 please advise i like the samsungs , will sata II work on it ?

  • Late 2007 MacBook questions

    I've heard that this model has issues with the video going out. I recently aquired one in great shape and was curious if I should use it or sell it. Also how would I go about tightning up the hinge on the notebook?

  • I just bought the ox mountain lion and i cant download it!!

    i just bought the ox mountain lion and i cant download it!! Dear Moh Nasser, Your Apple ID was just used to purchase OS X Mountain Lion from the Mac App Store on a computer or device that had not previously been associated with that Apple ID. You may