Network change notification
We are getting a error alert on our Mac mini OS X 10.7.5 of
Network change notification for "servername1". the host name of "servername1" has changed to "servername1". some service may not work correctly unitl they have been updated to use the new configuration.
what error is this, how do we fix this. please need your assistant
Hello, since some days I encounert the same issue! As my MAC mini server has loads aof I/O Errors, I am wondering if this is a possible root cause for this? On the other hand, why? What happens and what has the change of the Hostname to do with I/O-Problems? Many thanks in advance for any response! Best rgds, Martin
Similar Messages
-
Host name network change notification
I recently installed Lion Server, and it is daily (sometimes more often) producing messages about "Host name of $mymachine.local has changed to $mymachine.local" (that is, no change) ...
Any obvious reason why this should happen, and what one should do about inhibiting it?
Thanks in advance,
khbHello, since some days I encounert the same issue! As my MAC mini server has loads aof I/O Errors, I am wondering if this is a possible root cause for this? On the other hand, why? What happens and what has the change of the Hostname to do with I/O-Problems? Many thanks in advance for any response! Best rgds, Martin
-
Every network change break the sound
Hello,
I've got this problem for a few month now. At first I tough it was a bad update or a missconfig I did, but many update later it's still present and I believe my other computer has the same problem.
What happen is that every time something related to networking change, the sound system seam to be disabled. Here is some of the action I do to make it fail:
- Connect to a VPN (wich create TUN interface)
- Start a virtualbox vm with internal network enabled (create a vboxX interface)
- plug in my cellphone
- or simply plug any usb thumbdrive
what is also strange is that disconnecting and reconnecting to some vpn make the sound work again. Same thing when plugin a usb drive. So that has been my work around lately.
I mostly listen to music with amarok and when the problem happen I get a notification that the sound card is disable and switching to the next one, the same notification appear when it get back working.
I use a fully up to date arch, with KDE. My headphone are plugged via an HDMI screen. I haven't been able to find any error in the log when it happen, but I might not be looking at the right place.
Does somebody have any idea what happening here?I already looked at the log (or journal, it's the same thing for me) and it doesn't contain any error at those time.
That's why I'm asking for idea here. -
Using Database Change Notification instead of After Insert Trigger
Hello guys! I have an after insert trigger that calls a procedure, which in turn is doing an update or insert on another table. Due to mutating table errors I declared the trigger and procedure as autonomously transactional. The problem is, that old values of my main tables are inserted into the subtable since the after insert/update trigger is fired before the commit.
My question is how can I solve that and how could I use the change notification package to call my procedure? I now that this notification is only started after a DML/DDL action has been commited on a table.
If you could show me how to carry out the following code with a Database Change Notification I'd be delighted. Furthermore I need to know if it suffices to set up this notification only once or for each client seperately?
Many thanks for your help and expertise!
Regards,
Sebastian
declare
cnumber number (6);
begin
select count(*) into cnumber from (
select case when (select date_datum
from
(select f.date_datum,
row_number() over (order by f.objectid desc) rn
from borki.fangzahlen f
where lng_falle = :new.lng_falle
and int_fallennummer = :new.int_fallennummer
and lng_schaedling = :new.lng_schaedling
and date_datum > '31.03.2010'
where rn=1) < (select date_datum
from
(select f.date_datum,
row_number() over (order by f.objectid desc) rn
from borki.fangzahlen f
where lng_falle = :new.lng_falle
and int_fallennummer = :new.int_fallennummer
and lng_schaedling = :new.lng_schaedling
and date_datum > '31.03.2010'
where rn=2) then 1 end as action from borki.fangzahlen
where lng_falle = :new.lng_falle
and int_fallennummer = :new.int_fallennummer
and lng_schaedling = :new.lng_schaedling
and date_datum > '31.03.2010') where action = 1;
if cnumber != 0 then
delete from borki.tbl_test where lng_falle = :new.lng_falle
and int_fallennummer = :new.int_fallennummer
and lng_schaedling = :new.lng_schaedling
and date_datum > '31.03.2010';
commit;
pr_fangzahlen_tw_sync_sk(:new.lng_falle, :new.int_fallennummer, :new.lng_schaedling);It looks like you have an error in line 37 of your code. Once you fix that the problem should be resolved.
-
Don't see email accounts to change notifications and no notifications for TEXTS.
I have had carrier issued software release 10.2.1.2977 for awhile.
I noticed now that under Notifications --> Core Applications there is no mention of any of my email accounts.
(But I have no issue receiving or sending email via this Q10).
And although it seems that I can change notification for Text Messages, in practice there is no LED or Vibrate or Sound that happens when a text does arrive. (And again there is no issue receiving or sending texts via this Q10 BUT no notification of any type)
Any ideas to resolve these notification problems?
If not, I will be forced, albeit reluctantly to "starting fresh".
Having said that I am not sure the best and safest way to do this ie reinstall carrier OS and then restore what I have backed up using BB Link.
I would love to know of the easiest, safest way to do as I have described.
Thanks for your advice.
And yet as you can see I am able to make changes of NOTIFICATON for texts but whatever I choose I still don't get notification via LED or VIBRATION and for my email accounts which Ican't see LED and VIBRATE is working fine (but of course can't change them)!
I have had this official OS10 software for awhile...well before I noticed this problem.If the apple id being used by iCloud isn't the one you want, go to settings > icloud > delete account. It doesn't actually delete the account, but it removes it from your device so you can put in the right apple id
-
Issue in Oracle 11g Database Change Notification for Java application
Hi,
I am trying to use Oracle's Database Change Notification in Java application.
I followed the sample application (+DBChangeNotification.java+ , Example 29-2), provided in the following link:
+[http://download.oracle.com/docs/cd/B28359_01/java.111/b31224/dbmgmnt.htm#CHDEJECF]+
I am able to see that the Registration of the SQL query is successful.
But, when I do changes to the table registered, notifications are not received in the Listener class (+DCNDemoListener.java+).
Ideally, the method DCNDemoListener.onDatabaseChangeNotification() should be invoked on any insert/update to the registered table. But this method is not getting invoked.
The execution has stopped in the following line of DBChangeNotification.java Class.
this.wait();
+==> The application was WAITing indefinitely in this line, as the NOTIFY() from DCNDemoListener.java was not executed.+
I am using VPN to connect to Oracel server. Remote Oracle Server is protected my firewall. Is this the reason for not sending the notifications from Oracle server?
The version of software used are given below:
Oracle Client - Oracle 11.1.0
JDK - 1.6
Oracle JDBC Driver - ojdbc6.jar
Can someone help me to resolve this issue?
Thanks in Advance.
Regards
Sam
Edited by: Ponsu on Apr 7, 2011 10:41 PMHi,
I am having similar issue. Where you able to resolve it.
I am also using the same example you were using.
I am using the following version.
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
Compatibility: 11.2.0.0.0
I do not see any notification coming back from the DB.
Appreciate your help.
Thanks & regards,
Ebe -
Hello together,
we have an .Net application which implements the Change Notification using ODP.NET.
On the customer site all worked well on the development and test environment connected to an Oracle database version 11.2.0.1.0. After setup of the production environment (Oracle 11.2.0.2.0 on another server) the change notification didn't work anymore.
The notifications are registered properly, but the event handles don't receive the change events.
It was checked, if all ports are open, firewall etc. and no hint from this side was found, why it should not work.
Then we recompiled the .Net application with references set to the new version of ODP.NET (11.2.0.2.1) - also without success.
After all, a second database was installed in the production environment, but now version 11.2.0.1.0 (same version as in development and test environment), and if connected to this database the change notification worked as expected.
Can anybody give me a hint, what might be the reason for not receiving change notification events on Oracle 11.2.0.2.0 ?
Thanks a lot and best regards
hattlThis is a DB bug, not an ODP.NET bug. If it were documented anywhere, it would be in the DB README. This problem affects anyone using change notification on a DB on any platform. This is not a problem specific to ODP.NET.
I suspect this issue is not documented since it was diagnosed after 11.2.0.2 became available. If you wish to track a bug, you can log into My Oracle Support and view the bug log. I viewed the bug log myself and the problem has been resolved. It's just waiting for the 11.2.0.3 patchset to be released.
If your organization needs this fix sooner than the second half of this year, let me know. I'll ask Oracle Support if they can include this fix in a bundled patch or one-off. -
Change notification E_mail text doesn't work in Portal 7.0
I am changing notification E_Mail text accroding this link:
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm</a>
But it doesn't work.
and I have a question ,
where should I saved the file 'com.sap.security.core.util.notification.notificationTexts_language_zh_CN.properties' in the Portal server.Since you have not provided a more detailed desription of what is not working, and what is at error and what you assume the desired output to be for the specific user(s), I can only recommend you check the following:
1.) The email parameters are being configured per language. As such the user you are testing with needs to have the same default portal language assigned. Either by default or by personalisation.
2.) The 'com.sap.security.core.util.notification.notificationTexts_language_zh_CN.properties' file you are using may be referencing a notificationTexts_cn.properties language entry. Check the language installations are named the same and be aware this can be case sensitive.
3.) Ensure that you have the entry in the config tool in the same case. -
Inter-Site Change Notification Not Working
I made the change in ADSIEDIT to enable Inter-site change notification after adding a second AD site on our domain.
The domain level and the old domain controllers in the main site are Server 2008 and the new domain controller for the new site is 2012 R2.
I tested it by adding and deleting users on a domain controller and checking that the users were added or deleted on the domain controller at the other site. It seemed to be working fine with that test. I could see the change within seconds.
However, I noticed that group membership changes and account lockout status are not updating quickly between sites.
I went back to ADSIEdit and saw that the "1" that I had entered in options a few days earlier was gone and it shows <not set> again.
I put the 1 back in and then when to a different domain controller and it still shows not set there.
What needs to be done to make sure that these changes stick and replicate between sites?Have you enabled change-notifications on the site link according to?
http://www.ryanjadams.com/2010/05/turbo-charge-active-directory/#axzz2PaGkqbUu
Account Lockout attributes such as PwdBadCount and BadPasswordTime are NONE replicated attributes and should contain unique values on each DC, so they might not be the best to verify change-notifications against, moreover not all group memberships
are replicated to a DC if it's not GC in a multi-domain environment.
Do you have any manual connection objects (e.g.) not managed by the KCC? If so those needs to be changed back to be managed by the KCC if the change-notification option should be automatically propagated down from the site link, or either you have to enable
change-notifications manually as well on those connection objects, have a look at:
http://www.ryanjadams.com/2010/05/turbo-charge-active-directory/#axzz2PaGkqbUu
This script can help you find out if you do have manual connection objects:
Get-ADReplicationConnection -Filter {AutoGenerated -eq $False} |
Select-Object Name,AutoGenerated,ReplicateToDirectoryServer,ReplicateFromDirectoryServer |
Out-GridView
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog -
Oracle DB change notification is not working ..pls help
Can anyone help on my problem ?
Here is the step i done :
Step 1. Run the following command login as sysdba:
GRANT CHANGE NOTIFICATION TO COPS;
GRANT EXECUTE ON DBMS_CHANGE_NOTIFICATION TO COPS;
Step 2. Run following create table script and commit:
CREATE TABLE COPS.employees
employee_id NUMBER NOT NULL,
first_name VARCHAR2(10),
last_name VARCHAR2(10),
salary NUMBER
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
NOMONITORING;
ALTER TABLE COPS.employees ADD (
CONSTRAINT employees_PK
PRIMARY KEY
(employee_id));
INSERT INTO employees
VALUES(149,'ALEX','TAN',5000);
Step 3 :Query “select from DBA_CHANGE_NOTIFICATION_REGS”*
I manage to get the notification for insert record appear.
Step 4: Run update query:
update employees set salary = salary + 10 where employee_id = 149;
commit;
Step 5: Re-run the “select from DBA_CHANGE_NOTIFICATION_REGS”*
There is no rows returned.
Can anyone help me on this ? how to trace why the updates notification is not trigger ?Hi,
I had the same situation in this post by 814992
[Database Change notification running on Unix with c# |http://forums.oracle.com/forums/thread.jspa?messageID=9167210�]
Can somebody help why database notification cannot works in unix platform ?
Regards,
Chua
Edited by: user13476831 on Dec 14, 2010 7:00 PM -
Suitable FM/BAPI for Change Notification QM02
Hi
I need to simulate transaction QM02. Change Notification -Vendor fault List
I have found two FM's
1. IQS0_CHANGE_NOTIFICATION
2. IQS0_MODIFY_NOTIFICATION
But not sure which one to use.
Can somebody throw some light on this.
Thanks and Regards
Sree RamyaHi,
Check this..
BAPI_SERVNOT_ADD_DATA Added Items, Causes, Activities, Tasks, Partners of the service notif.
BAPI_SERVNOT_CHANGEUSRSTAT Change the user status of a service notification
BAPI_SERVNOT_CLOSE Complete service notification
BAPI_SERVNOT_CREATE Create service notification
BAPI_SERVNOT_DEL_DATA Delete Items, Causes, Activities, Tasks, Partners of the service notif.
BAPI_SERVNOT_GET_DETAIL Get details about a service notification
BAPI_SERVNOT_MODIFY_DATA Modify a service notification or associated subdata
BAPI_SERVNOT_POSTPONE Postpone service notification
BAPI_SERVNOT_PUTINPROGRESS Put in process a service notification
BAPI_SERVNOT_SAVE Save service notification
Regards -
Suggest BAPI for change notification IW52
Hi,
Kindly suggest BAPI for change notification IW52.
Regards,
TanayaHow to find function module or Bapi for particular transaction in sap?
If you mean that you need to know what BAPI's a particular tranx uses, which I can only assume that's what you mean, then you should access the code behind the transaction and search for 'CALL'. That normally is the standard method that think that most people use.
Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this.
1. Find out the package of the transaction.
Start Va01 go to system --> status.
Double click on transaction
Package is VA
Open this package in SE80
Open business engineering-->Business object types
Find the BO which sounds the most appropriate
I would suggest BUS2032 Sales Order
Double click.
Open methods.
Find the released method with from data or something similar in the name
, Createfromdat2
Position the cursor in it and click the program button
Scroll down to find the bapi used in this method
With this way you can also find out programs and FM's
2. Start va01 go to system-->status
Double click transaction VA01
Double click on package
Read the application component. (this is SD-SLS Sales)
Then open the transaction BAPI
Sales and distribution>Sales>sales order
createfromdat2
Answer: This is the BAPI for your mentioned transaction code BAPI_GOODSMVT_CREATE.
thanks,
Sankar M -
Bid Invitation not automatically sending change notification email
Hello,
I have the folowing issue with the email output bid invitations in SRM 5.
In Define actions for document output I set BBP_PD_BID to Processing when saving document. This work fine for new Bid Invitations, but when I make a changes after publishing no new output is generated for change notifications.
When I manually select 'Inform bidders and send out bids', the origional email is re-output and not the change version of the smartfotm text ('We would like to draw your attention to the'..... and not "The following bid invitation has been changed")
Is the auto output of change notifications for bid invitation standard? I though it was as I saw it set up in a different system.
Thanks in Advance,
KyleThanks for your reply. I am aware of the custom smartform functionality.
It looks like the auto output is not standard as per this sap help page:
http://help.sap.com/saphelp_srm50/helpdata/en/a7/81b463611c124d8c9d2c5bd8d17b34/content.htm
When I saw auto output of changes before before it must have been an enhancement.
Regards,
Kyle -
Exception thrown while regestring for database change notification
hi all,
i have taken sample code from docs for DCN
but im not able to register DCN,its throwing
ORA-29973: Unsupported query or operation during change notification registration
can any one please help me out in this.I'm not a DBA. So, I don't know all the tools that are available to monitor structural DB changes such as this one. Change Notification's purpose is to monitor user schema data changes, not Oracle system data changes.
I'm guessing that there are DBA tools to monitor trigger code changes, perhaps in OEM. You may want to pose this question on a DB server or OEM discussion forum to see if someone knowledgeable on DB management can answer. It's unlikely there are too many DBA-types monitoring the ODP.NET discussion forum. -
Client blocks after a crash while registering for change notification
Hi, I just moved this message from the Jdbc forum as being of more general interest, not limited to any Java client.
I got a client crash since the JVM was short of heap space (the involved application was inserting data).
Then I run the application again.
Connection was ok, but then the client was blocked forever while waiting for a server reply (in a socket read) during the execution of a select intended to register a change notification listener.
It seems that the crashed session left around something dirty in the server, concerning the change notification machinery. Perhaps some locks on concerned tables.
Restarting the server solved the problem, although far from optimal.
Server is 11gR2.
Any suggestion to cleanup after such a crash is welcome, since so far I guessed that a terminated session (whether crashed or not) should have cleaned up locks and alike.since so far I guessed that a terminated session (whether crashed or not) should have cleaned up locks and alike.it is possible/probable that Oracle RDBMS does not know or care that the client crashed.
It is likely that Oracle is waiting for additional requests from this client session.
I doubt that any "clean up" has been performed.
Maybe you are looking for
-
How can i tranfer contacts from my nokia to my iphone?
How do i transfer contacts from my nokia E72 to my iphone4?
-
Unable to read/recognize burned DVDs?
I'm having some issues playing DVDs on my MDD G4. The computer did not come with a SuperDrive, but I installed one myself several years ago. (I'm not remembering the specific brand of the drive I used offhand, but can look it up if it matters.) I mov
-
Question - changing the NEXT extend size manually
Hi Guys, I would like to get clarification on the subjected topic. During DB reorg, we have an option to change the next extend size manulay. If I want to change the next extend size , which is the best practise to follow on deciding the next extend
-
My daughter got a Zen V GB for christmas. I installed the software on my Win XP PC but her laptop has Windows 98 SE. I have read some other posts about using other players with Win98 but not the Zen V. I would settle for basic functionality. Chris
-
i have recieved a new boxed copy of photoshop elements 12 and adobe premiere elements 12 with my new laptop,when i try to install i get as far as the screen where it asks you to put in your product code and it tells me code is not valid, cant get to