Network hard drive going to sleep?

A small question here! Is a network drives plug into the Airport is going to sleep if it's not used? Is there a setup somewhere where I can set the sleeping time for that network drive?
Thanks you!
Nicolas

It sounds like the drive isn't working. I suggest you return it.

Similar Messages

When my screen goes to sleep and then the hard drive goes to sleep why won't the screen wake up?

I can repeat this 100% of the time. If I let the screen go to sleep (or I manually put it to sleep) and I shut the computer so the hard drive goes to sleep (or if the hard drive simply goes to sleep on the timer), when I open the Macbook Pro the screen will not wake up, although I think the hard drive does as the back light on the keyboard turns on. Any ideas on why this is happening. My computer is 4 weeks old...a bit frustrating. The best answer I have gotten is get a new one for Apple...or completely re-install the OS.
Jared

The reason why it's happening is not obvious and can't be determined without more information. The fact that you can reproduce the problem makes it a lot more tractable.
As a first step, boot in safe mode (shift key down at startup.) Can you reproduce the problem now? If so, note the time, then reboot as usual (not in safe mode) and look in the system log for error messages at the time the screen failed to wake up.

Airport Extreme Hard Drive Going to Sleep

Hi,
I have recently purchased an Airport Extreme along with a 3tb WD My Book Essential hard drive and all was going swimmingly (and I was wirelessly backing up using time machine) up until the other day. Annoyingly the hard drive is going to sleep after an hour or so of inactivity and cannot be spun up again without being restarted at the hard drive itself instead of when the network needs it.
Is there any way of spinning the hard drive up over the network automatically when it wants to back up or I want to find a file on the hard drive? Do I need to buy a USB hub? Or would another solution work?
Thanks,
Henry

It sounds like the drive isn't working. I suggest you return it.

Hard drive goes to sleep in 2 minutes when hooked up to my Airport Extreme?

I have a usb hard drive hooked up to my airport extreme as a network drive and it works great, I use it for all my movies and music and all my computers on my network can access the drive, but if I am not accessing a file it goes to sleep really quickly and then when I do want to access a file I haft to wait for the drive to spin up again. As long as a video or music is playing off it it continues to run as you would expect, just wondered if any one knows why it goes to sleep so quickly and is there away to extend the sleep time.
Thanks

I don't know the exact reason but I've tried different externals and internal drive in the TC or usb attached to TC or the Extreme and some drives don't sleep and its annoying that these would use unneccassary power.

Hard drive going to sleep

I have an older iMac G3 running 10.3.9. I have the power saver settings set to sleep the computer after an hour. I do NOT have the only spin down hard drive check box checked. I also have the screen saver set to come on after 20 minutes. After the screen saver comes on within a few minutes I will hear the hard drive spin down. The screen saver is still acive...then it spins back up for a few and then back down again. Any idea why this is happening?
Thanx...Jon

Hi,
Your question made me think. So I checked mine and low and behold, right now my drive is wound-down, not spinning.
So, to check out what would make it run *all the time* I played with some settings. Found that in the "system Preferences" under "energy saver", going into options and found 3 setting for the processor. Mine was on "automatic". Putting it on High changed the drive to run. To reduced was like Auto.
So, the lil Mac has a lot of Magic build into it, not only for what we do, but also to save on ware-and-tear of it's accessories. Once loaded with what one normally does and uses, the drive rests (why spin and do nothing?). I do not know how much memory you have, but I have 1.5 gig... that moves faster then a drive, since under normal use it's about 300-400 meg. That leaves time for the drive to start and receive in the background... while I still work in the front. Or wait till I shutdown or put it to sleep.
Another intersting item is the system log under the Apple menu, in "About this Mac". If you read some of that, you come out with how this system thinks. It's amazing!!!!
Enjoy...

OS X freezes when hard drive goes to sleep

So i have been virtually PC free for about a year now and I am absolutely loving it. I love it so much I use my 12 inch iBook all of the time. It is run constantly as I am an open source developer and I do a lot of coding.
Anyways, about 2 weeks ago my mac started to freeze whenever I would walk away from it for a few moments. This is not the kernle panic screen that i am talking about. I mean that os x just froze. I could not do anything. Nothing responded. It never happened while I was at my computer just when I walked away for a few moments. It would happen at least 3-4 times a day.
I got fed up trying to get it to work so I did a backup and reinstalled everything. It was about time for me to reorganize anyways so this was good. I thoughtmy problems were over until it started freezing again. I sat down at though of what could be making it freeze. The only thing that my mac does when I walk away is to put the hd to sleep. So i turned that setting off in the energy saver and my mac has not froze for the past couple of days.
What I am wondering is...
Has anyone else had this problem? If so what can i do to get it fixed? Is it a hardware problem, ie I need to get my harddrive replaced, or is it an os x problem?
Thanks for any help
Craig

Good thing you turned that setting off. Though it saves energy (and I'm quite the environmentalist) putting the HDD to sleep actually is very hard on it and wears it out much faster because it is constantly starting and stopping. I found this program called Drive Genius that does a pretty good job of diagnosing Hard drive problems. I would suggest you pick up a copy and run some diagnostic test, or maybe try running the apple hardware test off of the Tiger Boot CD.

External Hard Drives going to sleep.

Is there a way to set an external drive to NEVER sleep. I have several externals (Lacies and Seagates running USB2.0) and they go to sleep if not accessed regularly.
Which is a problem with a documentary timeline as if I'm in a viewing it freezes when I get to a part later on in the TL that has gone to sleep....for a viewing to go smoothly I have to export a QT, which quite frankly is a pain.
Any suggestions would be appreciated.
Cheers,
Susan.

To force your drives to never sleep:
Launch the Terminal application (Applications>Utilities>Terminal) and type:
sudo pmset spindown X
type your password when it asks for it.
X=the number of minutes that you want till your drive spins down.
0 (zero) is never
And note that this is a more 'controlled' way of checking "Put the hard disk to sleep when possible" than in system preferences/energy saver/sleep In there, checked means 10 minutes and unchecked means 180 minutes (not never).
More info on using pmset here:
http://developer.apple.com/documentation/Darwin/Reference/ManPages/man1/pmset.1. html
And this text was found here
http://www.thexlab.com/faqs/sbbod.html
x

Hard drives going to sleep

I am working on a documentary using Final Cut 5.0.4, on a quad with 2.5 gigs of RAM, and needless to say there is a lot of footage... All the footage is stored on 4 Lacie drives. I've experineced a freeze while watching the footage in the sequence as the drives wake from sleeping... Is there a way to prevent them from falling asleep so as not to have this lag in view the footage from drive to drive..?
G5 Mac OS X (10.4.6)

To force your drives to never sleep:
Launch the Terminal application (Applications>Utilities>Terminal) and type:
sudo pmset spindown X
type your password when it asks for it.
X=the number of minutes that you want till your drive spins down.
0 (zero) is never
And note that this is a more 'controlled' way of checking "Put the hard disk to sleep when possible" than in system preferences/energy saver/sleep In there, checked means 10 minutes and unchecked means 180 minutes (not never).
good luck.
x

Hard Drive Goes To Sleep - Always

The hard drive in my Mac Pro spins down every few minutes. I am constantly interrupted when working on it to wait for the hard drive to spin up. I do mean constantly.
This is not an Energy Saver control panel setting. Everything is set to never sleep, no how, no way. Still the HD sleeps every few minutes.
Is there a way in the Terminal to reset the hard drive's setting directly or some utility to set the drive to never spin down? Or even to have it only spin down when the control panel calls for it to spin down?
Thanks

I have this issue too. I own two identical MacPro units running 10.4.10. They are set for the CPU to sleep after 1 hr, display after 15 mins. The "Put the hard disk(s) to sleep when possible" option in Energy Saver is OFF.
Despite the latter, after a certain length of time (not much more than 15mins), at least one hard drive(s) spin down (one machine has 3 drives, the other 2), stopping with a click (presumably head-locking). A few minutes later they do it again, adn so on indefinitely.
I am not disturbed by this so much as worrying that the drive(s) will suffer more wear by being spun up and down every few minutes than if they stayed either on or off. I would therefore like them to stay in one state or the other, and I feel that this should be determined by the Energy Saver setting of "Put the hard disk(s) to sleep when possible", which is currently apparently IGNORED. ie this appears to be a bug.
The response I get on one machine to the instruction "pmset -g" is :
Active Profiles:
AC Power -1*
Currently in use:
disksleep 180
hibernatemode 0
displaysleep 15
powerbutton 1
womp 1
sleep 60
autorestart 0
hibernatefile /var/vm/sleepimage
Hope this helps.
Has this been reported as a bug?
Drive in Bay 1 is the original WD2500JS (Macintosh HD)
Drive in Bay 2 is a third-party ST3500641AS
I can't tell you which one(s) I hear spinning down. It is rather hard to tell.
Thanks,
--Richard E

How do I set up Time Machine to work with an Iomega network hard drive?

I have just bought a new iMac having switched from Windows, and am very much a beginner when it comes to all things Apple. Previously I had used my NAS hard drive with my old windows pc. i successfully used it to transfer a lot of data from the old pc to the iMac but can't seem to get it recognised when I try to configure time machine. I have downloaded the latest version of Iomega Home storage manager which appears in the application folder in the dock, but when I click on The HSM icon it just disappears and nothing happens. I can access the drive through the Bonjour service and can see its contents in Finder. I have looked through the forums here but much of the info assumes a level of knowledge that i don't have. Is there an 'idiot's guide' anywhere to enable me to set up time machine to use the network hard drive?

You would probably benefit from a couple of things, first going through these 2 links
Time Machine FAQs & Time Machine Troubleshooting.
If you still have questions there is a TM forum, because TM is part of OS X you will find the forum in the Snow Leopard forum. Click Apple Support Communities and in the search field type Snow Leopard. Once you are in the correct forum you can narrow your search by clicking Refine this list.
Roger

Setup TC as network hard drive?

How would I setup my TC as a network hard drive to store and retrieve my files at will?

Let's go over things so that you understand the upsides and downsides to doing this.
The Time Capsule was designed for your backups...not everyday files. While you can store data separately on the Time Capsule, as a network drive, access is going to be on the slow side compared to a drive that is directly attached to your Mac.
Time Machine will not be able to backup files that you store on the Time Capsule disk, so you will need to use an application like Chronosync or Carbon Copy Cloner that has the ability to backup files on a network drive to another destination.
We'll assume that you have the Time Capsule already set up for Time Machine backups.
On your Mac, click anywhere on the open desktop so that the Finder menus are displayed at the top of the screen. Click the Finder menu, then click Preferences, then click General.
Under the heading of "Show these items on the desktop", make sure that there is a check mark next to "Connected Servers"
Open Macintosh HD or the Finder and look for the Time Capsule icon under the SHARED heading on the left side of the window. Click on the Time Capsule and a folder will appear just to the right. Double click that folder to mount the drive on the desktop.
The first time that you do this, you will likely have to click "Connect As" in the upper right hand area of the window and enter the Time Capsule device password.
If you click the gear icon in the window at the center of the screen, you can click New Folder for document storage. You can create as many folders as you want. Users will access the Time Capsule drive the same way.

Is my hard drive going bad?

What are some of the signs of a hard drive going bad?
Lately my computer has been acting funny. Every few seconds I hear noises like my computer is trying to do something but then it winds down then stops. It's sounds like it could be the hard drive, but I'm not sure. It even does this when the computer is in sleep mode. I'm not sure what else to do. I've ran several Utillity programs such as Tech Tool Pro and Disk Warrior. I've also ran Disk Utility. While it's doing this it sometimes causes a lag (spinning beach ball) in some of the programs I'm using.
Does it sound like I may need to buy a new hard drive? If so, any suggestions would be much appreciated. Right now I have a 80gig hard drive.
thanks,
Tim

Hello again Tim,
Maybe your machine is not in as bad shape as you are trying not to think about. You have had no errors reported by the hardware test or Tech Tool. Chances are you have a corrupted system cache, internet cache and a couple of .plist (preference) files, which common and not difficult to cure.
First thing to do is to install and run a cache cleaner. I've attached the link to Onyx. After you've installed and opened Onyx select the cleaning button. Then select system cache and internet cache and run it.
You should also delete the preference files for Mail and for Safari and any other apps that seem to hang. The easiest way to find them is by typing the app's name into the search box of a Finder window and delete the .plist files. You can delete any of these files for slow apps without danger of removing important files - anything with .plist is OK. I've also attached a link to free app that checks all your system preference files. It may pick up on the corruption without eliminating them one by one.
Don't pull the RAM yet! There's still a few more tricks to try.
Onyx - http://www.titanium.free.fr/pgs/english.html
Preferential treatment - http://www.versiontracker.com/dyn/moreinfo/macosx/22790

How to prevent the hard drive to go sleeping ?

My 20" core 2 duo imac is now running 10.4.8, on the standard 250Gb hd (from seagate : model ST3250824AS).
I remarked that after a few minutes of idling, it goes to sleep (I can easily hear it spinning down... and up when I need it or by itself a few moments later, with the spinning ball for a few seconds...)
I find this behaviour a bit stupid on a desktop computer and I would like to prevent it... I found something on the energy panel (preferences) and I unchecked the case allowing the harddrive to go to sleep as soon as possible.
No change.
I played with the SpindownHD applet (provided with the CHUD from developer tools) and the display is weird : it displays that Disks sleep after 180 minutes idle (which is perfect...) except that when the harddrive is idling, the display is changed to <<Disks sleep after 1 minutes idle>> and indeed the harddrive goes sleeping... The display then goes back to <<after 180 minutes idle>>...
Not a big problem, but weird, and, IMHO, plain stupid behaviour for a desktop harddrive, all the more so than I guess it will make the harddrive wear out more quickly...
Did I miss something obvious ?
phjo

This presumes that the hard drive itself doesn't have
a built-in sleep control that's independent and
unchangeable. However, even drives that do usually
have a sleep time of at least 15 minutes. That
doesn't sound like the case for your drive from what
you've posted.
It might well be that, in the sense that I'm not that sure that the delay after which the drive goes to sleep is less than 15 minutes. (Not everything done on the computer involves disk access, so when the hard drive went to sleep, it might have been idling for longer than what I thought.)
That being said, on seagate web site, the documentation about this model states that power management should be accessible through the operating system setup, so it looks like nothing is unchangeable...
Maybe power management in tiger does not comply completely with this drive specific controls... yet... Quoting the documentation : <<the standby timer delay is established using a Standby or Idle command.>>
but it appears that when the drive enters Idle status, for the internal seagate hard drive as well as the external firewall (when plugged in) the delay that is applied is 1 minute...
phjo

Start up drive goes to sleep, won't wake up

I added a second internal drive (SATA) Maxtor 6V250F0 250gb and have made it my start up drive. The problem is, every now and then the drive goes into sleep mode. (The computer itself has not gone to sleep. As often as not, I simply reading a website or whatever.) This leads to spinning beach ball city as applications stop responding. The only way to recover is to do a hard shut down using the power button and restart.
I have tried unchecking "Put the hard disk(s) to sleep when possible" in the Energy Saver control panel, but it still happens.
Possibly related: If I put the machine to sleep manually, when I wake it up, the start up drive acts as if it is read-only. Again, only a restart can correct it.
Also possibly related: The old start up drive can not be unmounted either in the Finder or in Disk Utility. As a result, I can't erase it with Disk Utility. (I realize I could probably get around this by starting up from the Tiger DVD, but I'm more concerned about the new start up drive problems.)

Having the same problem. 74GB raptor boot drive becomes read only after idle

Lion - can no longer connect to WD wireless network / hard drive.

I upgraded to Lion and now I am unable to connect to my WD wireless network hard drive. it tells me that the version of the server I am trying to connect to is not supported and to contact your system administrator to resolve the problem. Suggestions?

See #C16 in Time Machine - Troubleshooting.

Network hard drive going to sleep?

Similar Messages

Maybe you are looking for