Network is not reading the appropriate DNS Settings

I went through many trouble shooting rounds with Time Warner Cable to discover that the modem isn't the problem. I also tried replacing my ethernet cable and setting up an entirely new location which resulted in the wrong ISP numbers for TWC.
I am at my wits end with this issue because internet access is must in our home.
Problem:
In short the network settings are not giving me the right ISP numbers and no one can tell me why or how to remedy the issue. Is my Ethernet port burned out?
Message was edited by: Toyaburris

Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
An explanation of why using Open DNS is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
Wikipedia also has an interesting article about Open DNS:
http://en.wikipedia.org/wiki/OpenDNS

Similar Messages

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/

I am not able to Sync. My iPOD classic 80Gb. It tells that as iTunes can not read the contents-restore to factory settings- after restoring – it tells that it can not be restore bcause there are files that are used by other application. I am having Widows

I am not able to Sync. My iPOD classic 80Gb. It tells that as iTunes can not read the contents-restore to factory settings- after restoring – it tells that it can not be restored bcause there are files that are used by other application. My iPOD appears in My Computer in drive H as a mass storage generick volume

Try disabilng the Enable Disk Use option from under the iPod's Summary tab, applying the changes, and seeing if that helps.
Otherwise, temporarily disabling any antivirus, security, firewall, or file indexing software that may be running on your system and then try restoring your iPod again.
B-rock

Contribute could not read the shared settings file.....

We are using Contribute 4 via FTP connection. Suddenly, I
have one user today that is getting the following error when trying
to connect to things she should have access to.
The error: "Contribute could not read the shared settings
file for this Website because the file has been corrupted. To
re-create the shared settings file, an administrator must
administrate the website again."
As a sidenote, this user had recently been sent approximately
41 files for review, I have no idea if there is a connection or
not. This feature has worked fine for them before.
Anyone see this problem before? I did check and I have other
users that can access and edit the Website just fine. It seems
specific to this one user.
Thanks - Lainie

I think this has something to do with the PNG plugin.

Help required please. "Itunes can not read the contents of my iphone"

Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description:    PC
IP Address:    (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask:    255.255.255.255
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:    10.143.147.147
        10.143.147.148
Adapter Name:    {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description:    Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name:    {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description:    Broadcom 43225 802.11b/g/n
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection:    PC
Connected:    Yes
Online:        Yes
Using Modem:    Yes
Using LAN:    No
Using Proxy:    No
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number:    85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

You may not have the appropriate permissions to access the item fix.

So about 2 days ago after i downloaded and installed the iTunes update and when i tried to open it the next day it came up with
the error
"Windows can not access the specific device, file, or path. You may not have the appropriate permissions to access the item "and the parth was for c:\program files (x86)\itunes\itunes.exe.
But since I am the admin for my computer and only user thought it was weird. So look online and saw some topics but not a single one helped me. I gave access to all the folders, uninstalled everything apple and reinstalled still got the same error.
So I thougth it might be a virus or malware did a virus sacn nothing did a malware scan found some items removed them and still got the same error and even did system restore still same error.
I even made a new Admin accoung for my computer thinking mine had become corrupt but still same error. So I was at my wits end and had pretty much come to terms with the fact that I may not has access to itunes.
But i tried one last thing and this is the fix at least for me I installed itunes on an external hard drive then moved those files to my desktop. Here's excatly what i did.
1. I uninstalled itunes from my computer.
2. Plugged in external HD and made a new folder named it iTunes.
3. Ran iTunes setup and when it asked where to installed the files I chose my external HD which for me was the G drive and installed.
4. After iTunes was installed I viewed the files in my external HD and chose the iTunes folder and chose CUT.
5. I then pasted that to the desktop after that I just opened the folder and chose the iTunes applcation and to my surprise it opened with out a hitch.
You have to move the folder out of the external HD because if you don't and you unplug the HD it won't open unless the HD is plugged in.
Sorry for the supe long post but I just wanted to share my fix for this annoying problem so other people may try it and see if it works for them .

boatwreck,
Welcome to Lenovo Forums !
Thank you for taking time to post your inquiry. I would like to share with you information on .temp.exe
Description: Temp.exe is not essential for Windows and will often cause problems. Temp.exe is located in a subfolder of "C:\Documents and Settings". Known file sizes on Windows 8/7/XP are 386,048 bytes (50% of all occurrences) or 13,880 bytes. http://www.file.net/process/temp.exe.html
The program has no visible window. The Temp.exe file is not a Windows core file. Therefore the technical security rating is 61% dangerous.
If Temp.exe is located in a subfolder of "C:\Program Files", the security rating is 50% dangerous. The file size is 253,952 bytes. The program has no visible window. The program is loaded during the Windows boot process (see Registry key: Run). The file is not a Windows core file.
If Temp.exe is located in C:\, the security rating is 74% dangerous. The file size is 19,456 bytes. The file is a file with no information about its developer. The program is not visible. The Temp.exe file is not a Windows system file. The process listens for or sends data on open ports to a LAN or the Internet.
If Temp.exe is located in a subfolder of C:\Windows\System32, the security rating is 52% dangerous. The file size is 83,968 bytes.
Source : click on this link
I hope that this can help
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Our IT Director will not allow the appropriate TCP and UDP ports to be opened on the district WAN

I have about 30 Apple TV Units and our IT Director will not allow the appropriate TCP and UDP ports to be opened on the district WAN. When our teachers try to log on to Apple TV to broadcast lessons, websites, etc., they are booted off the network after about 20 minutes.
Any ideas for how I might solve this without having to hard-wire the Apple TV Units?

Honestly, you do not.
Either the IT director will cave and allow the appropriate ports or it doesn't work.
Hard wiring the ATVs will not rectify the problem.

Excel 2010 not using the default print settings

Currently got an issue with Excel 2010 not using the default print settings for a couple of users on our network,
basically when pressing cntrl P or selecting the print option from the file menu the printer settings are different to the print settings selected in the devices and printers menu, we have checked the print drivers etc but this has still not resolved the
issue, all other office programs are fine and also other users are reporting this issue more and more with different printers,
tried restarting print spooler service and re-installing office but this has come to no avail,
any ideas would be much appreciated!

Hi,
This issue occurs because the Page Setup settings that you specify in your file override the settings that you specify in the printer driver properties.
To work around this issue, do not specify the paper size, page orientation, or page margins in the printer driver properties. Instead, specify these settings in your workbook.
To specify these settings, follow these steps:
1.Start Excel, and then open the workbook you want to change.
2.In Microsoft Office Excel 2010, click the sheet that you want to print, and then click the Page Layout tab. In the Page Setup group, click Page Setup to open the Page Setup dialog box.
3.Click the Page tab.
4.Under Paper size, click the paper size that you want.
5. Click Options button and in Printing Shortcuts tab, in the Paper source area, perform one of the following steps: ◦If the printer can automatically select the correct paper tray to use, click Default tray in the First page list, and then click Default
tray in the Other pages list.
Default tray is the default setting in both of these lists.
◦If the printer cannot automatically select the correct paper tray to use, you may have to select the paper tray that contains the paper size that you selected in step 4.
To do this, click the appropriate paper tray in the First page list and in the Other pages list.
6.If you want to change the page orientation or its page margins, click the Finishing tab.
7.Select the options that you want.
8.Click OK.
9.Repeat steps 2 to 8 for each sheet of your workbook for which you want to specify settings.
Jaynet Zhang
TechNet Community Support

The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions

Hi
I originally posted this in the Windows 7 Networking forum and they advised to post it here.
We use Windows 7 SP1 clients with Roaming Profile and Folder Redirection and they are connected to a Windows 2008 SP2 server. We are getting issues when someone tries to open files on their redirected Desktop and they get the message "'The item
referred to by this shortcut cannot be accessed. You may not have the appropriate permissions" if you click browse it then defaults to a different users profile. If you click through the errors the file eventually loads. If you open Word from
the Start menu and then browse to the file it opens fine. We have found that deleteting the Normal.DOTM file sometimes fixes the error, but only seems effective 50% of the time. This doesn't happen for all users, and seems to occur in small
groups and not all the time. We have also had the same message come up with someone trying to open Word files an online learning resource we have created.
There are a couple of events showing for about the time the error occured they are:
Type Error Source Application Error Category Name 100 Event 1000
Faulting application name: WINWORD.EXE, version: 14.0.4762.1000, time stamp: 0x4bae25b7
Faulting module name: wwlib.dll, version: 14.0.4762.1000, time stamp: 0x4bae2623
Exception code: 0xc0000005
Fault offset: 0x00034b81
Faulting process id: 0x1734
Faulting application start time: 0x01d0234ef75c42aa
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Faulting module path: C:\Program Files (x86)\Microsoft Office\Office14\wwlib.dll
Report Id: 6f74438b-8f42-11e4-9e45-00c2c6506cb5
Type information Source Office Software Protection Platform Service Category Name 0 Event 1003The Software Protection service has completed licensing status check.
Application Id=59a52881-a989-479d-af46-f275c6370663
Licensing Status=
1: 1f76e346-e0be-49bc-9954-70ec53a4fcfe, 1, 1 [(0 [0x00000000, 1, 0], [(?)(?)( 1 0x00000000 30 0 msft:rm/algorithm/hwid/4.0 0x00000000 0)(?)(?)(?)])(1 )(2 )]
2: 9da2a678-fb6b-4e67-ab84-60dd6a9c819a, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
3: dd457678-5c3e-48e4-bc67-a89b7a3e3b44, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
The software protection message we get in clusters of about 6 or more multiple times through the day

Hi
An update. We have approx 400 people with roaming profile/folder redirection on Windows 7/2008 and this only seems to have occurred to about 15 people, and then seems to clear up for a period and then happens again. We also have a similar number
of people with roaming profile/folder redirection on Windows 7/2003 system and we haven't had a report of this issue happening on this setup.
So far we haven't been able to replicate the issue using a test account, so are struggling to find out what is causing it and why it is so random.
Regrds
Dave

How do I deal with "StartUpItems if2k" has not been started because it does not have the proper security settings?

Whenever I turn on or restart my MBP, a dialog box appears saying --> “/Library/StartupItems/if2k” has not been started because it does not have the proper security settings.
How can I fix this?
First, I searched online and found a site with a If2k_Remover_V2.zip file, but whenever I try to open the link, a page comes up saying,
Forbidden
You don't have permission to access /w/files/if2k/If2k_Remover_V2.zip on this server.
Any thoughts on this?
Also, I see the if2k folder in the Library/StartUpItems; is it something I can just drag into the Trash? Or would that be a bad move?

Did you ever figure this out? I just upgraded to Lion on my Air and I have the same issue.

Error message: ""/Library/StartupItems/IntegoCommon" has not been started because it does not have the proper security settings."

I recently got a new Macbook Pro. I transferred my info from my old mac. Now when I startup my Macbook Pro, I get this error message "“/Library/StartupItems/IntegoCommon” has not been started because it does not have the proper security settings." I have run Disk Utility, but nothing has changed.
Thanks!

Uninstall any Intego junk according to its instructions and ensure that all its components have been completely eradicated from your Mac. You may need to download Intego's installer so that you can run its uninstaller.
Intego will make your Mac run very poorly, unacceptably so. Never install such junk on a Mac.

When I try to open iTunes, I get this error message: Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. I get a different error message if I try to uninstall it.

When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.

Any suggestions please?

In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?

In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?

It shouldn't print each page as a separate job and
each tab has a different name, so, even if it did, it
ought to give the printouts the name of the tabs.
It doesn't print each page as a separate job unless the orientation is different - that's the bug. And the name of the job is taken from the name of the window, not the name of the tabs. That's how every application works, which, I think, is why Excel allows the specific selection or the active sheets to be printed.
Still, that does sound like a plausible explanation.
However, even if presented with multiple prints with
the same name, the spooler should print each one!
The spooler does print each one - you can watch the spooler process the multiple jobs. I think, though, that they are being overwritten since all the jobs have the name of the window as the job title. And since this happens after the Save Dialog is presented, there's really nothing the application can do. To Excel, it's one job, the multiple orientations don't matter; it's just that Apple doesn't handle it correctly.
As a workaround, you can print the selections one at a time and give them unique names and then rejoin them in one PDF file.

Error in accessing I tunes-"Windows cannot access the specified device,path, or file. You may not have the appropriate permission to access the item"?

Question- Cannot access to Itunes after downloading photos. Message was "Windows cannot access to the specified device, path or file. You may not have the appropriate permissions to access the item". Plse advise

Do you get this message when you're trying to sync apps?

Pixel Bender... I do not have the appropriate permission...

I get this message consistenly on all attempts: either installing pixel bender in extension manger as well as launching xmp plug in by itself.
"You do not have appropriate permissions required to perform this operation. Contact your system administrator to obtain permission."
I tried this:
the "Is -alFod" procedure in the terminal.app;
Re: Pixel Bender... I do not have the appropriate permission...
1. Open the Utilities directory within the Applications directory.
2. Launch the application, "Terminal.app."
3. Type "ls -alFod " (case is important and note the space at the end) in the terminal but do not press enter/return.
4. Drag and drop the Pixel Bender Extension Manager package, "pixelbenderplugin_p2_64bit_090910.mxp," onto the window in "Terminal.app."
5. Press enter/return.
6. Copy the contents of the window and report them here.
gives me this result:
Last login: Mon Mar 30 21:39:01 on console
CatiMac:~ cat$ Is -alFod /Users/cat/Downloads/pixelbenderplugin_p2_64bit_090910.mxp
-bash: Is: command not found
am on iMac OS X 10.5.8; a solution would be great!
35. Mar 23, 2011 10:29 PM in response to: n0_b0dy
Re: Pixel Bender... I do not have the appropriate permission...
It's not clear to me how you can get into a state where the ls command cannot be found. Do you have admin rights on your mac? Regardless, please start a new thread, with details about the problem you're encountering. Thanks.
My admin rights is to an extent that i can bequeath the unit to anyone as I please.
Problems encountered is as stated on the first post, exactly like the problems encountered as posted by Brabusa60's; and the Is -alFod procedure at Terminal.app returns an unlikely response.

Sorry for the untimely response. I had internet troubles.
here are the terminal.app the output for these:
ls -alFo ~/Library/Application\ Support/Adobe/
ls -alFo ~/Library/Application\ Support/Adobe/Extension\ Manager\ CS5/
ls -alFo /Applications/Adobe\ Photoshop\ CS5/
Last login: Mon Apr 13 21:13:57 on console
CatiMac:~ cat$ ls -alFo ~/Library/Application\ Support/Adobe/
total 0
Even though I had read write permission then I was only able to succesfully install after I enabled "root" user.
nevertheless, thank you for responding

Network is not reading the appropriate DNS Settings

Similar Messages

Maybe you are looking for