Network range problem

network search capacity....Not able to gets network in area where other phone like micomax i phone 4,5,5s show good network....call is also having problems ....while other phone don't have any problem ...i felling as m runed by nokia because of this deficiency in Lumia 925.....not able to call properly because of this Lumia 925....other phone quite good.....why nokia and window do this cheating with me.....

Hi, vikramsaini2006. What troubleshooting steps have you tried? Aside from rebooting, you can update your system apps, especially Network+:
http://discussions.nokia.com/t5/Pool-of-Knowledge/Nokia-Windows-Phone-8-App-Updates/td-p/1640082
Make sure that your phone's software is up-to-date. If the issue remains the same, you may want to consider resetting your phone: Settings>About>Reset. As this will wipe all your data, it is best to have a backup file:
http://www.windowsphone.com/en-us/how-to/wp8/basics/back-up-my-stuff

Similar Messages

Apple TV 2 (2010) Wi-Fi Range/Problems - cant see my network!!

Hi - dont know if this is a general problem or not, but cant see any other posts on it anywhere!!!
I have recently set up a new ATV2 in our bedroom. When originally setting up, it found my network no problem. I even use my ipad in our bedroom and it works fine (and thats saying something!).
Anyway, apple tv set up fine. Rented a few movies ('Frozen' sucked big time!) and was happy. However, it now wont see my network for some random reason!
I have a BT home hub 2 (I know everyone says they are crappy, but it has worked fine so far!). Whats more annoying is that everything else still connects apart from the ATV2!
I have tried restarting everything and also tried turning of xbox and ALL other electrical devices in our house - but it still can't sind the network!
Anyone got any ideas aside from me sending it back to Apple??
THANKS!!

confusedgenius wrote:
I have a BT home hub 2 ... Anyone got any ideas
if the BT has a spare ethernet port, you could connect ATV2 to it by way of *powerline adapters* _*such as these*_. that should would eliminate any possible interference from other wirelessless devices etc.
JGG

ARD Client Doesn't Show When Using Scanner and Network Range

All-
When I use the Scanner in ARD3 to scan a remote Network Range over the internet, the ARD client that I KNOW EXISTS in that same IP range DOES NOT show up (other ARD clients that I'm not interested in do show up, but not the specific ARD client I need to observe/control).
If I then call the user at the remote ARD client on the telephone, and have them give me their IP address (using www.whatismyip.com, for example), I can use the Scanner in ARD3 to "find" the ARD client and add it to my All Computers list. Process: change the popup box to read "Network Address" instead of "Network Range" and set the IP address field to the address provided by the user.
Why doesn't the remote ARD client show up when I scan for it using a Network Range in ARD3? Obviously, I don't want to have to call up each user every time I need to perform maintenance/control a client to get their (dynamic) IP address.
I could use dynamic DNS, but that's overkill. If I know (from experience) that my ARD clients are in IP ranges X, Y, and Z, then I SHOULD be able to simply scan for them (or so I thought).
Any help appreceated.

Updated to ARD3.1 (admin and clients), but that did not solve the issue.
Let me try to restate the problem:
The ARD client is out of state/across the country (i.e., different sub-net) using a dynamically assigned IP adddress. I can (for now) connect to that ARD client successfully, and perform all ARD functions (that I've tried so far) becasue I know (for now) that client's IP address (I called and spoke with the user who used www.whatismyip.com to give me their IP address). So what's the problem, you ask?
Some time in the future, that same ARD client will have a new, dynamically assigned IP address. I'd like to be able to connect to that client without having to call on the telephone and ask the user what IP address they have been assigned now.
My thinking was that I could make a pretty good guess at their IP address (based on their old IP address, and the way Cable and Telco ISPs allocate/lease IP addresses). For example, if their current dynamic IP address is 999.888.777.45, I could guess that a subsequent dynamically assigned IP address would be in the range 999.888.777.2 to 999.888.777.255. With ARD, I could simply scan that range of network addresses using the Scanner and quickly find the ARD client I want.
I tried to do just that, and the ARD scanner did not find my client when I scanned the network range that the ARD client was actually in. It showed other ARD clients (that I do not administer, own, or want to hack into), but not the one I do want to observe/control/maintain (and have a legal right to). Somewhat paradoxically, when I used the Scanner to find the same ARD client by specific IP address, there was no problem.
Why doesn't the ARD Scanner "see" the ARD client when scanning the network range?

Z30 wifi range problem after upgrade to 10.3.1.1565

After upgrading on Z30 the OS from 10.2 to 10.3.1 I experience serious Wifi range problems. There is a room in our house where I had excellent wifi connection with 10.2 and now the Z30 does not find the router. Even the router SSID! If I go closer to the router, it connects (5-6 meters from the room where I tested). It is a quite new router, a Linksys EA6200 with the latest firmware. I rebooted the router. No result. I restarted Blackberry (switch on/off), no result. I deleted all wifi saved connection on phone and tried to reconnect. No result. I tried to make a soft reset (vol up/down buttons), no results. Dont understand, I made Over the Air (on wifi) OS update yesterday in the same room, same place. Now I dont see any router there altough the Android phone and the notebook gives 4 bar wifi there. Before OS Upgrade I made a full backup (everything) in the Blackberry Link, tried to restore to the earlier OS version, but the restore uploaded to the new OS the personal data and not the earlier OS System. How I could solve the Wifi problem or roll back to the earlier official version? I dont see possibility on phone. It's crazy to have a quite good business phone which is now unuseable for its original functions without normal wifi connectivity... I understand to advise hacking or restarting router, etc... but how about if I go to abroad? I cannot restart the router there... I need stable wifi or a stable operating system...

I have seen numerous posts on other forums about the degraded wifi performance on devices running 10.3.1.xxxx.
I definitely noticed a dropoff in signal strength when I went up to 10.3.1. I remedied it by putting in a better router, but I don't believe one should have to do that in order to maintain was was acceptable performance under a previous OS. 10.3.1 is supposed to be an upgrade after all.
I also notice a difference between Z10(STL100-1) and Z30(STA100-6) on 5GHz wifi : Z10 finds and connects with no problem, but Z30 does not find the network at all, even when right next to the router. I subsequently discovered that the router autoselects channel 149 on 5GHz, which the Z10 is happy with. For the Z30, I tried all other available 5GHz channels on the router in turn, and eventually found that Z30 will find and connect if the router is manually set to channel 48 only. A bit restrictive for a high-end device.
It has been postulated that the claimed improved battery life on 10.3.1 comes at the expense of compromised wifi performance. Could this be the case?
Hoping this issue soon finds itself in the "under investigation" box at BB.

How can I map SSH from an outside network range to an internal host (ASA 5505)

Cisco Adaptive Security Appliance Software Version 7.2(4)
Device Manager Version 5.2(4)
- External network range that needs SSH access: 8.8.8.0/24
- Outside interface: 10.1.10.2 (NAT'd from 7.7.7.7)
- Inside Network: 192.168.100.0/24
- Inside host to redirect external SSH to: 192.168.100.98
Hi All,
I have a Cisco ASA 5505 (version above) and I have someone that needs to SSH into a box behind the ASA. I'm having a few issues trying to configure this access-list and NAT. I've tried many combinations and clearly my IOS is not as good as I thought.
Can anyone help with this? What commands should I enter to accomplish mapping SSH from an outside network range to an internal host?
Many thanks,
Tarran

This may or may not work depending on how your modem handles the natting. On your firewall try this -
static (inside,outside) tcp interface 22 192.168.100.98 22
then add this to your acl on the outside interface of your ASA -
access-list outside_in permit tcp 8.8.8.0 255.255.255.0 host 10.1.10.2 eq 22
if you don't have an acl applied then add this extra step -
access-group outside_in in interface outside
Jon

Do I need a cable connecting my Time Capsule to Airport Express if I want to use the AE to extend my wifi network range?

I'm a bit confused by conflicting advice given by my local Apple shop and my internet provider.
My cable modem is plugged into a Time Capsule which I use to access the net wirelessly almost all over the house. The one spot the wireless doesn't quite reach is (of course) where I now need my office and iMac to be.
I thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable. That's fiddly and would involve cables running under the floor or along walls and ceilings, not something I can or really want to do. It's not really practical to try and move the cable connection point either.
My internet provider suggested a netgear wireless extender and said that would only need to be plugged into power. The reviews of the netgear product I found comparing it to Airport Express suggest that the Express doesn't need to be connected to anything other than power either to extend a network range (which was what I originally thought).
So I'm wondering which advice is correct? I've also read that the netgear product isn't all that easy to set up so I'd rather stick with. Apple if it will do what I want.
Thanks for any help out there

I thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable.
I'm sure that the guy at the Apple shop means well, but he is not correct.
While it would be preferable to connect the Time Capsule and AirPort Express using a wired Ethernet connection, the Express can connect wirelessly and extend the wireless signal the same way....IF...it is located where it can receive a good wireless signal.

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

Billing Number Range problem ( accounting document not generated)

Hi All,
I have created some billing types and for them I have assigned some internal number ranges. Now when I create a billing document it is getting saved with the proper number range but no accounting document is getting generated.
Also when I try to release the invoice I am getting an error which says " *Incorrect doc.no.: 10000009. Select document number between 0090000000 and 0099999999* "
K I N D L Y     suggest as U R G E N T.
Regards,
Danny.

Dear,
          Billing Number Range problem ( accounting document not generated) is not an error because when you create billing document then accounting document not generated. Accounting done after posting of that billing document with VFX3 or VF02 T.Code by account department.
           And for second issue you had define number range between 0090000000 and 0099999999 for invoice so thats why it happen.
Regards,
Sandip Shaktavat

I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??

I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??

Since you have the new Time Capsule, then you will need a new AirPort Extreme to match the performance capabilities of the Time Capsule.
If best quality is preferred, you will need to connect the Time Capsule and AirPort Extreme using a wired Ethernet connection between the devices. The advantage of doing it this way is that you can locate the AirPort Extreme exactly where it is needed...and there will be no loss of signal through the Ethernet cable.
A wireless connection will result in a significant drop in performance, but it might be OK for your uses, if you want to try it that way first to see if the performance is acceptable.
It is really important that the AirPort Extreme be located where it can receive a strong wireless signal from the Time Capsule.
A line-of-sight relationship between the Time Capsule and AirPort Extreme would be the goal, with the AirPort Extreme located about half way between the Time Capsule and the general area where you need more wireless signal coverage.

Bluetooth range problem/mac mini

hello , i have a mac mini with the bluetooth/ airport installed. i have the mini connected to my 36 inch tv. i recently purchased an apple wireless keyboard and mouse. now as i can recall the range of bluetooth should be somewhere in the 30ft range. i was hoping to be able to sit on my couch and use this setup. now when i go more then 1 foot away from the mini with the mouse and keyboard they nolonger work. i updated everything and it still dosnt work. the mouse gets unconnected and the keyboard dosnt work then at all. can someone please help me for now i feel i have wasted my money and am going to return the mini, keyboard and mouse

I fixed this last night (Mac Mini, Late 2009). If you have upgraded your RAM there is a strong possibility that the bluetooth antenna came loose while reassemling the mini. I was very careful installing ram, but last evening when I dissassembled the mini I found that one of the bluetooth antennae was disconnected. Popped it back in, reassembled, and my reception went from 1 foot back up to the full extent of the room. If you are having range problems, take it apart (ifixit.com) and check it.

Error : Message no. F5695 number range problem

hii all
i am facing a serious error. my 'SA' document type has picked up maximum number from the assigned no range. and so that i have assigned a new no range in SA document type
but when i am doing a new doument entry in Tcode - FB50 system pick the maximum number for the newly assigned no range and getting error messege
"Number range 6000 in year 22 has been used up for company code 2011"
Message no. F5695
Co Code = 6000
No Range = 22
Fiscal year = 2011
also when i am doing vendor invoice tcode = FB60, my system also shows the same error related to that document type. please help to resolve
i am also facing this no range problem when i try to post document from FI to CO. please see the link
http://forums.sdn.sap.com/thread.jspa?threadID=2132125&tstart=0
why system pick up the maximum no? i cant understand. i have checked the object RF_BELEG and RK_BELEG. in Tcode - SNRO. but there is no inconsistency. please also suggest what should be the standerd setting in the above object in Tcode-SNRO
please help. i am unable to post any document
Regards
Rajesh

hi Marssel Vilaça
In FBN1 22 no range already has taken maximum no and showing the messege
"Number range 6000 in year 22 has been used up for company code 2011"
Message no. F5695
This is for SA document type. also when i make entry with different document type such as vendor Invoice (DR), it also picks the maximum number from the no range
You can I adjust my counter in BKPF? and how can i use the remaining no range?? in FBN1 all the no range in internal, not external
i am also facing this no range problem in CO also (Tcode = KANK).
I just confused. please see my 1st thread
please resolve
Regards
Rajesh

Help with puzzling wifi range problem on Macbook Pro

Hi There,
I am experiencing wifi range problems with my MacBook Pro (10.9.4).
Our wireless modem (Arris DG860) is located in the office, in the center of our home. The wifi bars register full on my Macbook and the internet works well in office.
When I move my Macbook to the lounge room, 6 steps away, my internet stops working despite wifi bars remaining full. We also have an Apple TV in the lounge room (I have airplay disconnected on Macbook). 15% of the time, I can somehow get the internet to work in the lounge room (sometimes just by disconnecting airplay),then it mysteriously stops- with wifi bars remaining full.
85% of time, the internet doesn't work at all in lounge room (still full wifi bars). Other rooms of the house that are similar distances away from modem experience the same problem. We did not experience this problem with our old Macbook pro (purchased in '09). With our old Mac we had same internet connection, modem and Apple TV.
The only place our current Macbook receives good internet connection is in the office.
We also have an iPad and two iPhone 4S'
Any suggestions anyone? TIA

Most people who live in neighborhoods or apartments are not blessed with so few WiFi transmitters to contend with. There are no clear channels for most people, even assuming the user knows how to optimize their router, which most people don’t.
I would also explain that I am FCC licensed amateur radio operator K5ZN extra class. I know how radios work and how electromagnetic waves behave. Every diagnostic and symptom tells me there is some incompatibility between my MBPs radio and specifically the Comcast modem-router. In another discussion I gave some technical information about the problem which I spent several day diagnosing while using two different Comcast "Docsis 3" routers.
I have not seen this WiFi problem when using Airport or other standard routers like Linksys or Netgear. The OP didn’t say what router they are using. My suspicions tell me that Apple is moving in the direction of a very sensitive power-saving radio while ISPs are trying to blast the neighborhoods with powerful WiFi. The result is that my poor Macbook can’t get a good signal.

Network Accounting Problem

I have a serious network accouting problem arisen from content engine:
Our routers are connected to internal backbone router with enabling Netflow to bill the usage (from domestic to backbone) of each users.
However, the CE will affect the network accounting seriously because it will replace the sender IP address with its own address before sending out to the link.
Would you give me some solution to remedy the problem?
Very Very Urgent!!
Thanks a lot..
Alex

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

Having issues with picture messaging get told to go to settings, then general, then network then cellular data network. my problem is there is no such option my phone is a 3gs

having issues with MMS messaging instruction for setup, are to gotto settings, then general, then network then cellular data network.My problem is there is no cellular data network optiion on this page have tried resetting phone , no good .Help.

That option does not exist depending on who the carrier is.
Who is the carrier? Are they a supported carrier?
Have you tried Settings > General > Reset > Reset Network Settings?

Network Extender problems w/Qwest customers during July 2011

I believe I have found the cause of the Network Extender problems surfacing in July, 2011. I am a customer who has been out of Network Extender usage for two weeks now. Read on....
Unbelievably, almost no one at Qwest, Verizonwireless, or Samsung (NE's manufacturer) has any idea what the cause is and neither Qwest nor Samsung knows that a problem exists at all.
After many hours on the phone to all three companies I finally believe I know the cause of the problem. The cause is an updated firmware revision that was pushed to all Qwest customers who use the Actiontec PK5000 modem/router. They have been pushing it out over the last few weeks, so the symptoms have been rolling rather than happening all at one time.
The latest version of the PK5000 firmware is QAP002-3.60.3.0.9.9 When the customer's modem receives that version update (unbeknownst to them), Network Extender is rendered inoperable... the modem does not recognize the NE is plugged into it and does not provide an IP address. The WAN light goes solid red, the GPS goes magenta and the SYS light goes red.
Because Qwest's PK5000 works fine with the upgrade (i.e. both wi-fi and ethernet connections work fine with my Macintosh MacBook Pro), they have no interest in solving my VerizonWireless problem.
Bottom line is VerizonWireless needs to get a patch created "yesterday" and made available to all Network Extender customers who use the Actiontec PK5000 Qwest modem/router immediately. I live in a rural area and despite the fact I've had a VerizonWireless cell phone for many, many years, I'll be forced into changing cell phone providers soon, as will every other NE user who has lost their NE usage because of this problem.
It boggles my mind that no one has figured this out and provided a patch for the Network Extender. Understandably, Qwest could care less this is happening, since their service is not effected. This is truly VerizonWireless' problem.
Now, what can you do??? Call customer service right now and get technical support. Give them the information above and let them know they need to develop a patch for the Network Extender to work with the new firmware (i.e. operating system) of the Actiontec PK5000 modem. It's only when they hear from a bunch of people that they will step up the urgency to find a solution. Thanks!

OK, what's the deal here. I've been having the same problems. Verizon gave me a new extender and I still have the same problem. The week of July 15th everything went dead. I live in downtown Denver and I still can't get service at my house. My network extender is no longer compatible with the PK5000 modem QWEST issued. Firmware got pushed out? uhh... OK that doesn't mean anything to me. Not my problem, but kudos to the gentlemen who figured that out.. Neither Verizon or qwest seem to not want to take responsibility.
So what's next? is there an extender on the market that is compatible with the infamous PK5000? Evidently, the guys @ Qwest I was on the phone with for 45 minutes seems to think it's some type of high speed low drag, technological phenomenon. I'd like to add that if someone from qwest or verizon tech support reads this, I do not have a land line at my house, I have never had a land line at my house so no I can't go to my desktop and troubleshoot the modem while on the phone. just to reinterate I live in downtown denver I do not have cell coverage at my house, and no it's not my house. Everyone in our area does not have coverage.
I've had verizon for over 10 years now and never had a problem. This is the first and biggest problem I had becasue verizon and qwest decided to "bundle" thier service offering...whatever that means.
I believe I have found the cause of the Network Extender problems surfacing in July, 2011. I am a customer who has been out of Network Extender usage for two weeks now. Read on....
"Unbelievably, almost no one at Qwest, Verizonwireless, or Samsung (NE's manufacturer) has any idea what the cause is and neither Qwest nor Samsung knows that a problem exists at all.
After many hours on the phone to all three companies I finally believe I know the cause of the problem. The cause is an updated firmware revision that was pushed to all Qwest customers who use the Actiontec PK5000 modem/router. They have been pushing it out over the last few weeks, so the symptoms have been rolling rather than happening all at one time.
The latest version of the PK5000 firmware is QAP002-3.60.3.0.9.9 When the customer's modem receives that version update (unbeknownst to them), Network Extender is rendered inoperable... the modem does not recognize the NE is plugged into it and does not provide an IP address. The WAN light goes solid red, the GPS goes magenta and the SYS light goes red.
Because Qwest's PK5000 works fine with the upgrade (i.e. both wi-fi and ethernet connections work fine with my Macintosh MacBook Pro), they have no interest in solving my VerizonWireless problem.
Bottom line is VerizonWireless needs to get a patch created "yesterday" and made available to all Network Extender customers who use the Actiontec PK5000 Qwest modem/router immediately. I live in a rural area and despite the fact I've had a VerizonWireless cell phone for many, many years, I'll be forced into changing cell phone providers soon, as will every other NE user who has lost their NE usage because of this problem.
It boggles my mind that no one has figured this out and provided a patch for the Network Extender. Understandably, Qwest could care less this is happening, since their service is not effected. This is truly VerizonWireless' problem.
Now, what can you do??? Call customer service right now and get technical support. Give them the information above and let them know they need to develop a patch for the Network Extender to work with the new firmware (i.e. operating system) of the Actiontec PK5000 modem. It's only when they hear from a bunch of people that they will step up the urgency to find a solution. Thanks!"

Network range problem

Similar Messages

Maybe you are looking for